The CP performance counter selects were accidentally marked as protected
so they couldn't be written from PM4 streams. Remove the protection
because user space does have an interest in setting up their own
counters.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We are currently leaking a drm_crtc_commit struct for every atomic
commit containing plane state. The dpu plane destroy function cleans up
the fb reference manually, but fails to release the commit ref. As a
result, we just keep allocating drm_crtc_commits without ever freeing
them. Fortunately there's a helper function which will clean up all of
our mess at once, so use that.
Thanks to Doug Anderson for reporting the memory leak (and leaving
breadcrumbs from kmemleak!).
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: de0a3d094d drm/msm: re-factor devfreq code
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Second set of patches for 4.20. Heavy refactoring on mt76 continues
and the usual drivers in active development (iwlwifi, qtnfmac, ath10k)
getting new features. And as always, fixes and cleanup all over.
Major changes:
mt76
* more major refactoring to make it easier add new hardware support
* more work on mt76x0e support
* support for getting firmware version via ethtool
* add mt7650 PCI ID
iwlwifi
* HE radiotap cleanup and improvements
* reorder channel optimization for scans
* bump the FW API version
qtnfmac
* fixes for 'iw' output: rates for enabled SGI, 'dump station'
* expose more scan features to host: scan flush and dwell time
* inform cfg80211 when OBSS is not supported by firmware
wlcore
* add support for optional wakeirq
ath10k
* retrieve MAC address from system firmware if provided
* support extended board data download for dual-band QCA9984
* extended per sta tx statistics support via debugfs
* average ack rssi support for data frames
* speed up QCA6174 and QCA9377 firmware download using diag Copy
Engine
* HTT High Latency mode support needed by SDIO and USB support
* get STA power save state via debugfs
ath9k
* add reset functionality for airtime station debugfs file
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbua+lAAoJEG4XJFUm622bc74H/3CU3nKceottcybfmdNcxbTj
OHQ6ulu2OJvIrTnKOIe9WWcgoGeoEEKUcEvrV2SjopYUvFR+XPdC0TPKCxmzi020
QQyemogR+EyMx4nDqYkMysACQjTgzym8vKYrYZ5JAf0S12nRkeu4Qhvod6a9bHkO
HJWJekhm2+wIXOb02LoLhsdijhUUlYPcROZCAXlsYf7mpRIgf7PJQURI+yjfiGBW
Z8cGOH7QHU/68b5ExQAgD3OVpI7cTQ3JlE/IM1nM7UozDPRm7ZipW+Q5XJCYwjfU
Yexh1wo8CUSoK2FW5mwJJUaDUfWR5PQMDBjmGXuauFrfIrTIltJpWliEAIFV++c=
=gsaN
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2018-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.20
Second set of patches for 4.20. Heavy refactoring on mt76 continues
and the usual drivers in active development (iwlwifi, qtnfmac, ath10k)
getting new features. And as always, fixes and cleanup all over.
Major changes:
mt76
* more major refactoring to make it easier add new hardware support
* more work on mt76x0e support
* support for getting firmware version via ethtool
* add mt7650 PCI ID
iwlwifi
* HE radiotap cleanup and improvements
* reorder channel optimization for scans
* bump the FW API version
qtnfmac
* fixes for 'iw' output: rates for enabled SGI, 'dump station'
* expose more scan features to host: scan flush and dwell time
* inform cfg80211 when OBSS is not supported by firmware
wlcore
* add support for optional wakeirq
ath10k
* retrieve MAC address from system firmware if provided
* support extended board data download for dual-band QCA9984
* extended per sta tx statistics support via debugfs
* average ack rssi support for data frames
* speed up QCA6174 and QCA9377 firmware download using diag Copy
Engine
* HTT High Latency mode support needed by SDIO and USB support
* get STA power save state via debugfs
ath9k
* add reset functionality for airtime station debugfs file
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The checkpatch script doesn't like camel-case names.
Renamed the variable.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the F: entry in MAINTAINERS file, point it to the correct file.
While at it, add DT binding doc F: entry too.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
My eyesight is not in good shape, which means that I have difficulty
reading the online Linux documentation. Specifically, body text is
oddly small compared to list items and the contrast of various text
elements is too low for me to be able to see easily.
Therefore, alter the HTML theme overrides to make the text larger and
increase the contrast for better visibility, and trust the typeface
choices of the reader's browser.
For the PDF output, increase the text size, use a sans-serif typeface
for sans-serif text, and use a serif typeface for "roman" serif text.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Current phrasing is ambiguous since it's unclear if attaching to a
children through PTRACE_TRACEME requires CAP_SYS_PTRACE. Rephrase the
sentence to make that clear.
Signed-off-by: Yves-Alexis Perez <corsac@corsac.net>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The memory hotplug notifier description is about kernel internals rather
than admin/user visible API. Place it appropriately.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The memory hotplug description in Documentation/memory-hotplug.txt is
already formatted as ReST and can be easily added to admin-guide/mm
section.
While on it, slightly update formatting to make it consistent with the
doc-guide.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix warning when running with CONFIG_DMA_API_DEBUG_SG=y by allocating a
device_dma_parameters structure and filling in the max segment size.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Memcpy has no direction (copy from memory to memory) so remove the check
in prep_memcpy()
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add code to retrieve the reset property from the dw-apb timers and if
the property is available, the safe operation is to assert the timer
into reset, and followed by a deassert of the timer reset (brings the
timer out of reset).
This patch is needed for systems where the bootloader has left the timer
not used in reset.
- Trivial conflict with commit a74bd1ad7a:
"Convert to using %pOFn instead of device_node.name"
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add a corresponding model list entry for ASUS G751 so that user can
test the quirk for another compatible machines more easily.
Reported-and-tested-by: Håvard <hovardslill@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS G751 requires the extra COEF initialization to make it microphone
working properly.
Reported-and-tested-by: Håvard <hovardslill@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are 8 small fixes for some char/misc driver issues
Included here are:
- fpga driver fixes
- thunderbolt bugfixes
- firmware core revert/fix
- hv core fix
- hv tool fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW7mgvw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yltNwCgp0XpcCTEoBCiBInhPHYpR4xnclYAoId6nfC5
89LJS04eEQzbiQJpigLt
=U6rt
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
I wrote:
"Char/Misc fixes for 4.19-rc7
Here are 8 small fixes for some char/misc driver issues
Included here are:
- fpga driver fixes
- thunderbolt bugfixes
- firmware core revert/fix
- hv core fix
- hv tool fix
All of these have been in linux-next with no reported issues."
* tag 'char-misc-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Initialize after IOMMUs
thunderbolt: Do not handle ICM events after domain is stopped
firmware: Always initialize the fw_priv list object
docs: fpga: document fpga manager flags
fpga: bridge: fix obvious function documentation error
tools: hv: fcopy: set 'error' in case an unknown operation was requested
fpga: do not access region struct after fpga_region_unregister
Drivers: hv: vmbus: Use get/put_cpu() in vmbus_connect()
Here are 3 small serial driver fixes for 4.19-rc7
- 2 sh-sci bugfixes for reported issues
- a revert of the PM handling for the 8250_dw code
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW7mhRw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykYngCghu5cEWdhIHHZh9PsRh4PBcE1LgUAoLhsnAw/
f3yufssSk5Wx8+OZmTK/
=xIYc
-----END PGP SIGNATURE-----
Merge tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
I wrote:
"Serial driver fixes for 4.19-rc7
Here are 3 small serial driver fixes for 4.19-rc7
- 2 sh-sci bugfixes for reported issues
- a revert of the PM handling for the 8250_dw code
All of these have been in linux-next with no reported issues."
* tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: sh-sci: Allow for compressed SCIF address"
Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"
Revert "serial: 8250_dw: Fix runtime PM handling"
Here are some small USB fixes for 4.19-rc7
These include:
- the usual xhci bugfixes for reported issues
- some new serial driver device ids
- bugfix for the option serial driver for some devices
- bugfix for the cdc_acm driver that has been there for a long time.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW7mhwQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykuxwCguad2aZql74xxtxDqrHG/9exX/YUAn1UhGfdR
nCfSTmSLt1WZXg3X+fUH
=Vm1C
-----END PGP SIGNATURE-----
Merge tag 'usb-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
I wrote:
"USB fixes for 4.19-rc7
Here are some small USB fixes for 4.19-rc7
These include:
- the usual xhci bugfixes for reported issues
- some new serial driver device ids
- bugfix for the option serial driver for some devices
- bugfix for the cdc_acm driver that has been there for a long time.
All of these have been in linux-next for a while with no reported
issues."
* tag 'usb-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci-mtk: resume USB3 roothub first
xhci: Add missing CAS workaround for Intel Sunrise Point xHCI
usb: cdc_acm: Do not leak URB buffers
USB: serial: simple: add Motorola Tetra MTP6550 id
USB: serial: option: add two-endpoints device-id flag
USB: serial: option: improve Quectel EP06 detection
Wolfram writes:
"i2c for 4.19
I2C has three driver bugfixes and a fix for a typo for you."
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Call i2c_dw_clk_rate() only when calculating timings
i2c: i2c-scmi: fix for i2c_smbus_write_block_data
i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized"
i2c: i2c-qcom-geni: Properly handle DMA safe buffers
Small fix for an unititialized mutex in the qedi driver.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW7juciYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUgAAQDlCQhi
Ww2iPFn7bANUEXmlpceCwva7xGokYQvoa9uhkgD/Ym5aFFlbD4U1THIWIh6AgSvz
5/uPEc7UTLCE/Zjib+0=
=d63s
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
James writes:
"SCSI fixes on 20181006
Small fix for an unititialized mutex in the qedi driver."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Initialize the stats mutex lock
Four regression fixes.
A fix for a change to lib/xz which broke our zImage loader when building with XZ
compression. OK'ed by Herbert who merged the original patch.
The recent fix we did to avoid patching __init text broke some 32-bit machines,
fix that.
Our show_user_instructions() could be tricked into printing kernel memory, add a
check to avoid that.
And a fix for a change to our NUMA initialisation logic, which causes crashes in
some kdump configurations.
Thanks to:
Christophe Leroy, Hari Bathini, Jann Horn, Joel Stanley, Meelis Roos, Murilo
Opsfelder Araujo, Srikar Dronamraju.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAlu4n8QTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgGJ+D/4nJ4ij6tb6LaIfMLxX7qCk43XFcXei
R0wMzliZp0sC3KqVgoeGZxpXL6vAI3G46Ix+4lTUEw2LxpDpkQBRXKVnaium2Cs7
qDSdycoWaqy5e40DRxUSno8oPtjMmDS43YnjY+/8ByA4hhF9XqzDGtF5EuCvc5Fr
Lsts+jT3fvxVEAQM/10KnCFXDAO3gh8HBbDX3AwMRwCyxuQXjLSqDfW0+gX5ZuOC
6LVZ2jGw1yen0mwFKPVWiJCMYeuaBn0u1LvzGb7XWHbITUBNGdx8YuOiLzAuOPYN
OfP7+TPDsp5lbyB5KWNOVUB2ajxXUCMeT4CWZ++0HpUi1rcbJIz8ksJ9ZjA+Y4Ij
FWOdauPdozDs6GUsvp1w9FHaD4B4KFDE7d5sKoIg73pKUPS+M/2JOIpNn/DMtg0a
RgArGaxcswIGaJLV+SW9K8laZb085HIAFJCKuHgRPixtz2t35y+f+lTyYVg/BIpF
lI/h60BSf7PMX0Jp1I1D8fUhmgFWcgz/rPN3J1BIG3jNjMmIU6bB+muGBlYZFDeC
tICbYa4FAKkc8KHCALb7iF2k3BFa28HxzHU6JbDm66JNaMRD0tSpTEgX7spMr7XS
RFySP+ofTBuzxwunsGWLjQy2rnY/DnFtbQgesDVByzTfCYhjQYqEdS38/LmWDZ6w
pLqBpNfSgvHd0g==
=FxNJ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.19-4' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Michael writes:
"powerpc fixes for 4.19 #4
Four regression fixes.
A fix for a change to lib/xz which broke our zImage loader when
building with XZ compression. OK'ed by Herbert who merged the
original patch.
The recent fix we did to avoid patching __init text broke some 32-bit
machines, fix that.
Our show_user_instructions() could be tricked into printing kernel
memory, add a check to avoid that.
And a fix for a change to our NUMA initialisation logic, which causes
crashes in some kdump configurations.
Thanks to:
Christophe Leroy, Hari Bathini, Jann Horn, Joel Stanley, Meelis
Roos, Murilo Opsfelder Araujo, Srikar Dronamraju."
* tag 'powerpc-4.19-4' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/numa: Skip onlining a offline node in kdump path
powerpc: Don't print kernel instructions in show_user_instructions()
powerpc/lib: fix book3s/32 boot failure due to code patching
lib/xz: Put CRC32_POLY_LE in xz_private.h
default_acl and acl of newly created inode will be initiated as
ACL_NOT_CACHED in vfs function inode_init_always() and later will be
updated by calling xxx_init_acl() in specific filesystems. However,
when default_acl and acl are NULL then they keep the value of
ACL_NOT_CACHED. This patch changes the code to cache NULL for acl /
default_acl in this case to save unnecessary ACL lookup attempt.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
When building a 32-bit config which has the above MFD item as module
but OLPC_XO1_PM is enabled =y - which is bool, btw - the kernel fails
building with:
ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_remove':
/home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:159: undefined reference to `mfd_cell_disable'
ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_probe':
/home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:133: undefined reference to `mfd_cell_enable'
make: *** [Makefile:1030: vmlinux] Error 1
Force MFD_CS5535 to y if OLPC_XO1_PM is enabled.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20181005131750.GA5366@zn.tnic
After the cleanups from Baoquan He, make it even more readable:
- Remove the 'bits' area size column: it's pretty pointless and was even
wrong for some of the entries. Given that MB, GB, TB, PT are 10, 20,
30 and 40 bits, a "8 TB" size description makes it obvious that it's
43 bits.
- Introduce an "offset" column:
--------------------------------------------------------------------------------
start addr | offset | end addr | size | VM area description
-----------------|------------|------------------|---------|--------------------
...
ffff880000000000 | -120 TB | ffffc7ffffffffff | 64 TB | direct mapping of all physical memory (page_offset_base),
this is what limits max physical memory supported.
The -120 TB notation makes it obvious where this particular virtual memory
region starts: 120 TB down from the top of the 64-bit virtual memory space.
Especially the layout of the kernel mappings is a *lot* more obvious when
written this way, plus it's much easier to compare it with the size column
and understand/check/validate and modify the kernel's layout in the future.
- Mark the part from where the 47-bit and 56-bit kernel layouts are 100% identical,
this starts at the -512 GB offset and the EFI region.
- Re-shuffle the size desciptions to be continous blocks of sizes, instead of the
often mixed size. I.e. write "0.5 TB" instead of "512 GB" if we are still in
the TB-granular region of the map.
- Make the 47-bit and 56-bit descriptions use the *exact* same layout and wording,
and only differ where there's a material difference. This makes it easy to compare
the two tables side by side by switching between two terminal tabs.
- Plus enhance a lot of other stylistic/typographical details: make the tables
explicitly tabular, add headers, enhance certain entries, etc. etc.
Note that there are some apparent errors in the tables as well, but I'll fix
them in a separate patch to make it easier to review/validate.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: corbet@lwn.net
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: thgarnie@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As described in:
77b0bf55bc: ("kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs")
GCC's inlining heuristics are broken with common asm() patterns used in
kernel code, resulting in the effective disabling of inlining.
The workaround is to set an assembly macro and call it from the inline
assembly block - which is also a minor cleanup for the jump-label code.
As a result the code size is slightly increased, but inlining decisions
are better:
text data bss dec hex filename
18163528 10226300 2957312 31347140 1de51c4 ./vmlinux before
18163608 10227348 2957312 31348268 1de562c ./vmlinux after (+1128)
And functions such as intel_pstate_adjust_policy_max(),
kvm_cpu_accept_dm_intr(), kvm_register_readl() are inlined.
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181005202718.229565-4-namit@vmware.com
Link: https://lore.kernel.org/lkml/20181003213100.189959-11-namit@vmware.com/T/#u
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As described in:
77b0bf55bc: ("kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs")
GCC's inlining heuristics are broken with common asm() patterns used in
kernel code, resulting in the effective disabling of inlining.
The workaround is to set an assembly macro and call it from the inline
assembly block - which is pretty pointless indirection in the static_cpu_has()
case, but is worth it to improve overall inlining quality.
The patch slightly increases the kernel size:
text data bss dec hex filename
18162879 10226256 2957312 31346447 1de4f0f ./vmlinux before
18163528 10226300 2957312 31347140 1de51c4 ./vmlinux after (+693)
And enables the inlining of function such as free_ldt_pgtables().
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181005202718.229565-3-namit@vmware.com
Link: https://lore.kernel.org/lkml/20181003213100.189959-10-namit@vmware.com/T/#u
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As described in:
77b0bf55bc: ("kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs")
GCC's inlining heuristics are broken with common asm() patterns used in
kernel code, resulting in the effective disabling of inlining.
The workaround is to set an assembly macro and call it from the inline
assembly block - which is also a minor cleanup for the exception table
code.
Text size goes up a bit:
text data bss dec hex filename
18162555 10226288 2957312 31346155 1de4deb ./vmlinux before
18162879 10226256 2957312 31346447 1de4f0f ./vmlinux after (+292)
But this allows the inlining of functions such as nested_vmx_exit_reflected(),
set_segment_reg(), __copy_xstate_to_user() which is a net benefit.
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181005202718.229565-2-namit@vmware.com
Link: https://lore.kernel.org/lkml/20181003213100.189959-9-namit@vmware.com/T/#u
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull irqchip updates from Marc Zyngier:
- kexec/kdump support for EFI-based GICv3 platforms
- Marvell SEI support
- QC PDC fixes
- GIC cleanups and optimizations
- DT updates
[ tglx: Dropped the madera driver as it breaks the build ]
In Documentation/x86/x86_64/mm.txt, the description of the x86-64 virtual
memory layout has become a confusing hodgepodge of inconsistencies:
- there's a hard to read mixture of 'TB' and 'bits' notation
- the entries sometimes mention a size in the description and sometimes not
- sometimes they list holes by address, sometimes only as an 'unused hole' line
So make it all a coherent, readable, well organized description.
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: corbet@lwn.net
Cc: linux-doc@vger.kernel.org
Cc: thgarnie@google.com
Link: http://lkml.kernel.org/r/20181006084327.27467-3-bhe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently CONFIG_RANDOMIZE_BASE=y is set by default, which makes some of the
old comments above the KERNEL_IMAGE_SIZE definition out of date. Update them
to the current state of affairs.
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: corbet@lwn.net
Cc: linux-doc@vger.kernel.org
Cc: thgarnie@google.com
Link: http://lkml.kernel.org/r/20181006084327.27467-2-bhe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* unify code between mt76x0, mt76x2
* mt76x0 fixes
* another fix for rx buffer allocation regression on usb
* move mt76x2 source files to mt76x2 folder
* more work on mt76x0e support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2
Comment: GPGTools - http://gpgtools.org
iEYEABECAAYFAlu4h2sACgkQ130UHQKnbvX8wQCgnFzeu4BFVJGROgdilKFwliOx
51wAn28rXRricg0PV1SeLWihSL+ovUZn
=YHTX
-----END PGP SIGNATURE-----
Merge tag 'mt76-for-kvalo-2018-10-05' of https://github.com/nbd168/wireless
mt76 patches for 4.20
* unify code between mt76x0, mt76x2
* mt76x0 fixes
* another fix for rx buffer allocation regression on usb
* move mt76x2 source files to mt76x2 folder
* more work on mt76x0e support
When SME is enabled, the memory is encrypted in the first kernel. In
this case, SME also needs to be enabled in the kdump kernel, and we have
to remap the old memory with the memory encryption mask.
The case of concern here is if SME is active in the first kernel,
and it is active too in the kdump kernel. There are four cases to be
considered:
a. dump vmcore
It is encrypted in the first kernel, and needs be read out in the
kdump kernel.
b. crash notes
When dumping vmcore, the people usually need to read useful
information from notes, and the notes is also encrypted.
c. iommu device table
It's encrypted in the first kernel, kdump kernel needs to access its
content to analyze and get information it needs.
d. mmio of AMD iommu
not encrypted in both kernels
Add a new bool parameter @encrypted to __ioremap_caller(). If set,
memory will be remapped with the SME mask.
Add a new function ioremap_encrypted() to explicitly pass in a true
value for @encrypted. Use ioremap_encrypted() for the above a, b, c
cases.
[ bp: cleanup commit message, extern defs in io.h and drop forgotten
include. ]
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: kexec@lists.infradead.org
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: hpa@zytor.com
Cc: akpm@linux-foundation.org
Cc: dan.j.williams@intel.com
Cc: bhelgaas@google.com
Cc: baiyaowei@cmss.chinamobile.com
Cc: tiwai@suse.de
Cc: brijesh.singh@amd.com
Cc: dyoung@redhat.com
Cc: bhe@redhat.com
Cc: jroedel@suse.de
Link: https://lkml.kernel.org/r/20180927071954.29615-2-lijiang@redhat.com