Commit graph

982,081 commits

Author SHA1 Message Date
Jon Derrick
de3ffa3011 PCI: Equalize hotplug memory and io for occupied and empty slots
Currently, a hotplug bridge will be given hpmemsize additional memory
and hpiosize additional io if available, in order to satisfy any future
hotplug allocation requirements.

These calculations don't consider the current memory/io size of the
hotplug bridge/slot, so hotplug bridges/slots which have downstream
devices will be allocated their current allocation in addition to the
hpmemsize value.

This makes for possibly undesirable results with a mix of unoccupied and
occupied slots (ex, with hpmemsize=2M):

  02:03.0 PCI bridge: <-- Occupied
	  Memory behind bridge: d6200000-d64fffff [size=3M]
  02:04.0 PCI bridge: <-- Unoccupied
	  Memory behind bridge: d6500000-d66fffff [size=2M]

This change considers the current allocation size when using the
hpmemsize/hpiosize parameters to make the reservations predictable for
the mix of unoccupied and occupied slots:

  02:03.0 PCI bridge: <-- Occupied
	  Memory behind bridge: d6200000-d63fffff [size=2M]
  02:04.0 PCI bridge: <-- Unoccupied
	  Memory behind bridge: d6400000-d65fffff [size=2M]

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
26ad34d510 PCI / ACPI: Whitelist D3 for more PCIe hotplug ports
In order to have better power management for Thunderbolt PCIe chains,
Windows enables power management for native PCIe hotplug ports if there is
the following ACPI _DSD attached to the root port:

  Name (_DSD, Package () {
      ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
      Package () {
          Package () {"HotPlugSupportInD3", 1}
      }
  })

This is also documented in:

  https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3

Do the same in Linux by introducing new firmware PM callback
(->bridge_d3()) and then implement it for ACPI based systems so that the
above property is checked.

There is one catch, though. The initial pci_dev->bridge_d3 is set before
the root port has ACPI companion bound (the device is not added to the PCI
bus either) so we need to look up the ACPI companion manually in that case
in acpi_pci_bridge_d3().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
5f5e4890d5 ACPI / property: Allow multiple property compatible _DSD entries
It is possible to have _DSD entries where the data is compatible with
device properties format but are using different GUID for various reasons.
In addition to that there can be many such _DSD entries for a single device
such as for PCIe root port used to host a Thunderbolt hierarchy:

    Scope (\_SB.PCI0.RP21)
    {
        Name (_DSD, Package () {
            ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
            Package () {
                Package () {"HotPlugSupportInD3", 1}
            },

            ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
            Package () {
                Package () {"ExternalFacingPort", 1},
                Package () {"UID", 0 }
            }
        })
    }

More information about these new _DSD entries can be found in:

  https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports

To make these available for drivers via unified device property APIs,
modify ACPI property core so that it supports multiple _DSD entries
organized in a linked list. We also store GUID of each _DSD entry in struct
acpi_device_properties in case there is need to differentiate between
entries. The supported GUIDs are then listed in prp_guids array.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
0e157e5286 PCI/PME: Implement runtime PM callbacks
Basically we need to do the same steps than what we do when system sleep is
entered and disable PME interrupt when the root port is runtime suspended.
This prevents spurious wakeups immediately when the port is transitioned
into D3cold.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
9c62f0bfb8 PCI: pciehp: Implement runtime PM callbacks
Basically we need to do the same thing when runtime suspending than with
system sleep so re-use those operations here. This makes sure hotplug
interrupt does not trigger immediately when the link goes down.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
94c7993fb5 PCI/portdrv: Add runtime PM hooks for port service drivers
When PCIe port is runtime suspended/resumed some extra steps might be
needed to be executed from the port service driver side. For instance we
may need to disable PCIe hotplug interrupt to prevent it from triggering
immediately when PCIe link to the downstream component goes down.

To make the above possible add optional ->runtime_suspend() and
->runtime_resume() callbacks to struct pcie_port_service_driver and call
them for each port service in runtime suspend/resume callbacks of portdrv.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: adjust "slot->state" for 5790a9c78e ("PCI: pciehp: Unify
controller and slot structs")]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
52be9464aa PCI/portdrv: Resume upon exit from system suspend if left runtime suspended
Currently we try to keep PCIe ports runtime suspended over system suspend
if possible. This mostly happens when entering suspend-to-idle because
there is no need to re-configure wake settings.

This causes problems if the parent port goes into D3cold and it gets
resumed upon exit from system suspend. This may happen for example if the
port is part of PCIe switch and the same switch is connected to a PCIe
endpoint that needs to be resumed. The way exit from D3cold works according
PCIe 4.0 spec 5.3.1.4.2 is that power is restored and cold reset is
signaled. After this the device is in D0unitialized state keeping PME
context if it supports wake from D3cold.

The problem occurs when a PCIe hotplug port is left suspended and the
parent port goes into D3cold and back to D0: the port keeps its PME context
but since everything else is reset back to defaults (D0unitialized) it is
not set to detect hotplug events anymore.

For this reason change the PCIe portdrv power management logic so that it
is fine to keep the port runtime suspended over system suspend but it needs
to be resumed upon exit to make sure it gets properly re-initialized.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
720d6a671a PCI: pciehp: Do not handle events if interrupts are masked
PCIe native hotplug shares MSI vector with native PME so the interrupt
handler might get called even the hotplug interrupt is masked. In that case
we should not handle any events because the interrupt was not meant for us.

Modify the PCIe hotplug interrupt handler to check this accordingly and
bail out if it finds out that the interrupt was not about hotplug.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
2018-10-02 16:04:40 -05:00
Mika Westerberg
eb34da60ed PCI: pciehp: Disable hotplug interrupt during suspend
When PCIe hotplug port is transitioned into D3hot, the link to the
downstream component will go down. If hotplug interrupt generation is
enabled when that happens, it will trigger immediately, waking up the
system and bringing the link back up.

To prevent this, disable hotplug interrupt generation when system suspend
is entered. This does not prevent wakeup from low power states according
to PCIe 4.0 spec section 6.7.3.4:

  Software enables a hot-plug event to generate a wakeup event by
  enabling software notification of the event as described in Section
  6.7.3.1. Note that in order for software to disable interrupt generation
  while keeping wakeup generation enabled, the Hot-Plug Interrupt Enable
  bit must be cleared.

So as long as we have set the slot event mask accordingly, wakeup should
work even if slot interrupt is disabled. The port should trigger wake and
then send PME to the root port when the PCIe hierarchy is brought back up.

Limit this to systems using native PME mechanism to make sure older Apple
systems depending on commit e3354628c376 ("PCI: pciehp: Support interrupts
sent from D3hot") still continue working.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
6299cf9ec3 PCI / ACPI: Enable wake automatically for power managed bridges
We enable power management automatically for bridges where
pci_bridge_d3_possible() returns true. However, these bridges may have
ACPI methods such as _DSW that need to be called before D3 entry. For
example in Lenovo Thinkpad X1 Carbon 6th _DSW method is used to prepare
D3cold for the PCIe root port hosting Thunderbolt chain. Because wake is
not enabled _DSW method is never called and the port does not enter
D3cold properly consuming more power than necessary.

Users can work this around by writing "enabled" to "wakeup" sysfs file
under the device in question but that is not something an ordinary user
is expected to do.

Since we already automatically enable power management for PCIe ports
with ->bridge_d3 set extend that to enable wake for them as well,
assuming the port has any ACPI wakeup related objects implemented in the
namespace (adev->wakeup.flags.valid is true). This ensures the necessary
ACPI methods get called at appropriate times and allows the root port in
Thinkpad X1 Carbon 6th to go into D3cold.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02 16:04:40 -05:00
Mika Westerberg
ac86e8eeb0 PCI: Do not skip power-managed bridges in pci_enable_wake()
Commit baecc470d5 ("PCI / PM: Skip bridges in pci_enable_wake()") changed
pci_enable_wake() so that all bridges are skipped when wakeup is enabled
(or disabled) with the reasoning that bridges can only signal wakeup on
behalf of their subordinate devices.

However, there are bridges that can signal wakeup themselves.  For example
PCIe downstream and root ports supporting hotplug may signal wakeup upon
hotplug event.

For this reason change pci_enable_wake() so that it skips all bridges
except those that we power manage (->bridge_d3 is set).  Those are the ones
that can go into low power states and may need to signal wakeup.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02 16:04:40 -05:00
Keith Busch
f0157160b3 PCI: Make link active reporting detection generic
The spec has timing requirements when waiting for a link to become active
after a conventional reset.  Implement those hard delays when waiting for
an active link so pciehp and dpc drivers don't need to duplicate this.

For devices that don't support data link layer active reporting, wait the
fixed time recommended by the PCIe spec.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-10-02 16:04:40 -05:00
Keith Busch
a6bd101b8f PCI: Unify device inaccessible
Bring surprise removals and permanent failures together so we no longer
need separate flags.  The implementation enforces that error handling will
not be able to override a surprise removal's permanent channel failure.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-10-02 16:04:40 -05:00
Keith Busch
7b42d97e99 PCI/ERR: Always report current recovery status for udev
A device still participates in error recovery even if it doesn't have
the error callbacks.

Always provide the status for user event watchers.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-10-02 16:04:40 -05:00
Keith Busch
542aeb9c8f PCI/ERR: Simplify broadcast callouts
There is no point in having a generic broadcast function if it needs to
have special cases for each callback it broadcasts.

Abstract the error broadcast to only the necessary information and removes
the now unnecessary helper to walk the bus.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-10-02 16:04:40 -05:00
Dai Okamura
aad2d4952d serial: 8250_uniphier: add auto-flow-control support
Add selective auto-flow-control support for UniPhier serial driver.

Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 13:38:58 -07:00
Masahiro Yamada
aca70d19c8 serial: 8250_uniphier: flatten probe function
Currently, the DT-related settings are split out to
uniphier_of_serial_setup(), but it turned out to be not nice.
The next commit will add a DT property, but it will not fit in
the helper.  Merge the helper into the probe function.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 13:38:58 -07:00
Masahiro Yamada
2fd8e45418 serial: 8250_uniphier: remove unused "fifo-size" property
The FIFO size of the UART devices is 64 on almost all UniPhier SoCs
with the exception Pro4TV SoC (MN2WS0235), which used 128 FIFO size.
However, Pro4TV SoC was never upstreamed, and out of production.

So, this property has never been used in a useful way.
Let's remove old unused code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 13:38:58 -07:00
Biju Das
9e3eb4eabd dt-bindings: serial: sh-sci: Document r8a7744 bindings
RZ/G1N (R8A7744) SoC also has the R-Car gen2 compatible SCIF, SCIFA,
SCIFB, and HSCIF ports, so document the SoC specific bindings.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 13:38:58 -07:00
Wei Yongjun
823f4e53f0 serial: uartps: Fix missing unlock on error in cdns_get_id()
Add the missing unlock before return from function cdns_get_id()
in the error handling case.

Fixes: ae1cca3fa3 ("serial: uartps: Change uart ID port allocation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 13:38:58 -07:00
Nicolas Ferre
377fedd186 tty/serial: atmel: add ISO7816 support
When mode is set in atmel_config_iso7816() we backup last RS232 mode
for coming back to this mode if requested.
Also allow setup of T=0 and T=1 parameter and basic support in set_termios
function as well.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[ludovic.desroches@microchip.com: rebase, add check on fidi ratio, checkpatch fixes]
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 13:38:55 -07:00
Nicolas Ferre
ad8c0eaa0a tty/serial_core: add ISO7816 infrastructure
Add the ISO7816 ioctl and associated accessors and data structure.
Drivers can then use this common implementation to handle ISO7816
(smart cards).

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[ludovic.desroches@microchip.com: squash and rebase, removal of gpios, checkpatch fixes]
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 13:38:55 -07:00
Steve Sakoman
c550f01c81 serial:serial_core: Allow use of CTS for PPS line discipline
Add a "pps_4wire" file to serial ports in sysfs in case the kernel is
configured with CONFIG_PPS_CLIENT_LDISC. Writing 1 to the file enables
the use of CTS instead of DCD for PPS signal input. This is necessary
in case a serial port is not completely wired.
Though this affects PPS processing the patch is against the serial core
as the source of the serial port PPS event dispatching has to be
modified. Furthermore it should be possible to modify the source of
serial port PPS event dispatching before changing the line discipline.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Tested-by: Steve Sakoman <steve@sakoman.com>
Tested-by: Eric Gallimore <egallimore@ucsd.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 13:38:55 -07:00
Chuck Lever
aadc5a9448 xprtrdma: Eliminate "connstate" variable from rpcrdma_conn_upcall()
Clean up.

Since commit 173b8f49b3 ("xprtrdma: Demote "connect" log messages")
there has been no need to initialize connstat to zero. In fact, in
this code path there's now no reason not to set rep_connected
directly.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 16:16:54 -04:00
Chuck Lever
ed97f1f79b xprtrdma: Conventional variable names in rpcrdma_conn_upcall
Clean up: The convention throughout other parts of xprtrdma is to
name variables of type struct rpcrdma_xprt "r_xprt", not "xprt".
This convention enables the use of the name "xprt" for a "struct
rpc_xprt" type variable, as in other parts of the RPC client.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 16:15:36 -04:00
Chuck Lever
ae38288eb7 xprtrdma: Rename rpcrdma_conn_upcall
Clean up: Use a function name that is consistent with the RDMA core
API and with other consumers. Because this is a function that is
invoked from outside the rpcrdma.ko module, add an appropriate
documenting comment.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 16:14:05 -04:00
Chuck Lever
8440a88611 sunrpc: Report connect_time in seconds
The way connection-oriented transports report connect_time is wrong:
it's supposed to be in seconds, not in jiffies.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 16:11:00 -04:00
Chuck Lever
3968a8a531 sunrpc: Fix connect metrics
For TCP, the logic in xprt_connect_status is currently never invoked
to record a successful connection. Commit 2a4919919a ("SUNRPC:
Return EAGAIN instead of ENOTCONN when waking up xprt->pending")
changed the way TCP xprt's are awoken after a connect succeeds.

Instead, change connection-oriented transports to bump connect_count
and compute connect_time the moment that XPRT_CONNECTED is set.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 16:08:12 -04:00
Dhinakaran Pandiyan
598c6cfe06 drm/i915/psr: Enable PSR1 on gen-9+ HW
We have new tests and fixes in place since the feature was last
disabled. Try again for gen-9+ hardware and enable only PSR1 by default as
a first step.
v2: Remove typo fix and comment improvements (Rodrigo)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: commit 2ee7dc497e ("drm/i915: disable PSR by default on HSW/BDW")
References: commit dcb2e993f3 ("Revert "drm/i915: Enable PSR by default on Valleyview and Cherryview."")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928061117.12394-1-dhinakaran.pandiyan@intel.com
2018-10-02 12:56:07 -07:00
Chuck Lever
d379eaa838 xprtrdma: Name MR trace events consistently
Clean up the names of trace events related to MRs so that it's
easy to enable these with a glob.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 15:55:36 -04:00
Nishanth Menon
2f149e6e14 clk: keystone: Enable TISCI clocks if K3_ARCH
K3_ARCH uses TISCI for clocks as well. Enable the same
for the driver support.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-02 12:55:15 -07:00
Atish Patra
ef1f225874
RISCV: Fix end PFN for low memory
Use memblock_end_of_DRAM which provides correct last low memory
PFN. Without that, DMA32 region becomes empty resulting in zero
pages being allocated for DMA32.

This patch is based on earlier patch from palmer which never
merged into 4.19. I just edited the commit text to make more
sense.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-02 12:50:01 -07:00
Chuck Lever
61da886bf7 xprtrdma: Explicitly resetting MRs is no longer necessary
When a memory operation fails, the MR's driver state might not match
its hardware state. The only reliable recourse is to dereg the MR.
This is done in ->ro_recover_mr, which then attempts to allocate a
fresh MR to replace the released MR.

Since commit e2ac236c0b ("xprtrdma: Allocate MRs on demand"),
xprtrdma dynamically allocates MRs. It can add more MRs whenever
they are needed.

That makes it possible to simply release an MR when a memory
operation fails, instead of "recovering" it. It will automatically
be replaced by the on-demand MR allocator.

This commit is a little larger than I wanted, but it replaces
->ro_recover_mr, rb_recovery_lock, rb_recovery_worker, and the
rb_stale_mrs list with a generic work queue.

Since MRs are no longer orphaned, the mrs_orphaned metric is no
longer used.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 15:48:12 -04:00
Chuck Lever
c421ece68f xprtrdma: Create more MRs at a time
Some devices require more than 3 MRs to build a single 1MB I/O.
Ensure that rpcrdma_mrs_create() will add enough MRs to build that
I/O.

In a subsequent patch I'm changing the MR recovery logic to just
toss out the MRs. In that case it's possible for ->send_request to
loop acquiring some MRs, not getting enough, getting called again,
recycling the previous MRs, then not getting enough, lather rinse
repeat. Thus first we need to ensure enough MRs are created to
prevent that loop.

I'm "reusing" ia->ri_max_segs. All of its accessors seem to want the
maximum number of data segments plus two, so I'm going to bake that
into the initial calculation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 15:46:35 -04:00
Chuck Lever
ef739b2175 xprtrdma: Reset credit grant properly after a disconnect
On a fresh connection, an RPC/RDMA client is supposed to send only
one RPC Call until it gets a credit grant in the first RPC Reply
from the server [RFC 8166, Section 3.3.3].

There is a bug in the Linux client's credit accounting mechanism
introduced by commit e7ce710a88 ("xprtrdma: Avoid deadlock when
credit window is reset"). On connect, it simply dumps all pending
RPC Calls onto the new connection.

Servers have been tolerant of this bad behavior. Currently no server
implementation ever changes its credit grant over reconnects, and
servers always repost enough Receives before connections are fully
established.

To correct this issue, ensure that the client resets both the credit
grant _and_ the congestion window when handling a reconnect.

Fixes: e7ce710a88 ("xprtrdma: Avoid deadlock when credit ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 15:45:09 -04:00
Mike Travis
2647c43c7f x86/tsc: Fix UV TSC initialization
The recent rework of the TSC calibration code introduced a regression on UV
systems as it added a call to tsc_early_init() which initializes the TSC
ADJUST values before acpi_boot_table_init().  In the case of UV systems,
that is a necessary step that calls uv_system_init().  This informs
tsc_sanitize_first_cpu() that the kernel runs on a platform with async TSC
resets as documented in commit 341102c3ef ("x86/tsc: Add option that TSC
on Socket 0 being non-zero is valid")

Fix it by skipping the early tsc initialization on UV systems and let TSC
init tests take place later in tsc_init().

Fixes: cf7a63ef4e ("x86/tsc: Calibrate tsc only once")
Suggested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russ Anderson <rja@hpe.com>
Reviewed-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Xiaoming Gao <gxm.linux.kernel@gmail.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Link: https://lkml.kernel.org/r/20181002180144.923579706@stormcage.americas.sgi.com
2018-10-02 21:29:16 +02:00
Mike Travis
20a8378aa9 x86/platform/uv: Provide is_early_uv_system()
Introduce is_early_uv_system() which uses efi.uv_systab to decide early
in the boot process whether the kernel runs on a UV system.

This is needed to skip other early setup/init code that might break
the UV platform if done too early such as before necessary ACPI tables
parsing takes place.

Suggested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russ Anderson <rja@hpe.com>
Reviewed-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Xiaoming Gao <gxm.linux.kernel@gmail.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Link: https://lkml.kernel.org/r/20181002180144.801700401@stormcage.americas.sgi.com
2018-10-02 21:29:16 +02:00
Chuck Lever
91ca18660e xprtrdma: xprt_release_rqst_cong is called outside of transport_lock
Since commit ce7c252a8c ("SUNRPC: Add a separate spinlock to
protect the RPC request receive list") the RPC/RDMA reply handler
has been calling xprt_release_rqst_cong without holding
xprt->transport_lock.

I think the only way this call is ever made is if the credit grant
increases and there are RPCs pending. Current server implementations
do not change their credit grant during operation (except at
connect time).

Commit e7ce710a88 ("xprtrdma: Avoid deadlock when credit window is
reset") added the ->release_rqst call because UDP invokes
xprt_adjust_cwnd(), which calls __xprt_put_cong() after adjusting
xprt->cwnd. Both xprt_release() and ->xprt_release_xprt already wake
another task in this case, so it is safe to remove this call from
the reply handler.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-02 15:26:30 -04:00
Colin Ian King
3c16890900 usb: gadget: fix spelling mistakeis "[En]queing" -> "[En]queuing"
Trivial fix to spelling mistakes in debug warning messages

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:30 -07:00
YueHaibing
8e4657c60c usb: typec: remove set but not used variables 'snk_ma, min_mv'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/usb/typec/tcpm/tcpm.c: In function 'tcpm_pd_select_pps_apdo':
drivers/usb/typec/tcpm/tcpm.c:2212:39: warning:
 variable 'snk_ma' set but not used [-Wunused-but-set-variable]

drivers/usb/typec/tcpm/tcpm.c: In function 'tcpm_pd_build_pps_request':
drivers/usb/typec/tcpm/tcpm.c:2405:37: warning:
 variable 'min_mv' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:30 -07:00
Bjørn Mork
355c74e55e usb: export firmware port location in sysfs
The platform firmware "location" data is used to find port peer
relationships. But firmware is an unreliable source, and there are
real world examples of errors leading to missing or wrong peer
relationships.  Debugging this is currently hard.

Exporting the location attribute makes it easier to spot mismatches
between the firmware data and the real world.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:30 -07:00
Zeng Tao
bd0e6c9614 usb: hub: try old enumeration scheme first for high speed devices
The new scheme is required just to support legacy low and full-speed
devices. For high speed devices, it will slower the enumeration speed.
So in this patch we try the "old" enumeration scheme first for high speed
devices, and this is what Windows does since Windows 8.

Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:30 -07:00
Biju Das
2cfe8f864d dt-bindings: usb-xhci: Document r8a7744 support
Document r8a7744 xhci support. The driver will use the fallback
compatible string "renesas,rcar-gen2-xhci", therefore no driver
change is needed.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:30 -07:00
Biju Das
77d3bf9391 dt-bindings: usb: renesas_usbhs: Add support for r8a7744
Document support for RZ/G1N (R8A7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:30 -07:00
Adam Thomson
1b6af2f58c usb: typec: tcpm: Fix APDO PPS order checking to be based on voltage
Current code mistakenly checks against max current to determine
order but this should be max voltage. This commit fixes the issue
so order is correctly determined, thus avoiding failure based on
a higher voltage PPS APDO having a lower maximum current output,
which is actually valid.

Fixes: 2eadc33f40 ("typec: tcpm: Add core support for sink side PPS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:30 -07:00
Maciej Żenczykowski
e0a2e73e50 usbip: fix vhci_hcd controller counting
Without this usbip fails on a machine with devices
that lexicographically come after vhci_hcd.

ie.
  $ ls -l /sys/devices/platform
  ...
  drwxr-xr-x. 4 root root    0 Sep 19 16:21 serial8250
  -rw-r--r--. 1 root root 4096 Sep 19 23:50 uevent
  drwxr-xr-x. 6 root root    0 Sep 20 13:15 vhci_hcd.0
  drwxr-xr-x. 4 root root    0 Sep 19 16:22 w83627hf.656

Because it detects 'w83627hf.656' as another vhci_hcd controller,
and then fails to be able to talk to it.

Note: this doesn't actually fix usbip's support for multiple
controllers... that's still broken for other reasons
("vhci_hcd.0" is hardcoded in a string macro), but is enough to
actually make it work on the above machine.

See also:
  https://bugzilla.redhat.com/show_bug.cgi?id=1631148

Cc: Jonathan Dieter <jdieter@gmail.com>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Tested-by: Jonathan Dieter <jdieter@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02 12:05:29 -07:00
Feng Tang
d2266bbfa9 x86/earlyprintk: Add a force option for pciserial device
The "pciserial" earlyprintk variant helps much on many modern x86
platforms, but unfortunately there are still some platforms with PCI
UART devices which have the wrong PCI class code. In that case, the
current class code check does not allow for them to be used for logging.

Add a sub-option "force" which overrides the class code check and thus
the use of such device can be enforced.

 [ bp: massage formulations. ]

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Stuart R . Anderson" <stuart.r.anderson@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H Peter Anvin <hpa@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thymo van Beers <thymovanbeers@gmail.com>
Cc: alan@linux.intel.com
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20181002164921.25833-1-feng.tang@intel.com
2018-10-02 21:02:47 +02:00
Jakub Kicinski
ff58e2df62 nfp: avoid soft lockups under control message storm
When FW floods the driver with control messages try to exit the cmsg
processing loop every now and then to avoid soft lockups.  Cmsg
processing is generally very lightweight so 512 seems like a reasonable
budget, which should not be exceeded under normal conditions.

Fixes: 77ece8d5f1 ("nfp: add control vNIC datapath")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 11:47:58 -07:00
David S. Miller
d793fb4682 wireless-drivers-next patches for 4.20
First set of new features for 4.20. mt76 driver is going through major
 refactoring and that's why there are so many mt76 patches. iwlwifi is
 also under heavy development and smaller changes to other drivers.
 
 Also wireless-drivers was merged to fix a conflict between the two trees.
 
 Major changes:
 
 ath10k
 
 * limit available channels via DT ieee80211-freq-limit
 
 wil6210
 
 * add 802.11r Fast Roaming support for AP and station modes
 
 * add support for channel 4
 
 iwlwifi
 
 * new FW API handling
 
 * some improvements in the PCI recovery mechanism
 
 * enable a new scanning feature;
 
 * continued work on HE (mostly radiotap)
 
 * TKIP implementation in new devices
 
 * work continues for new 22560 hardware
 
 mt76
 
 * add support for Alfa AWUS036ACM
 
 * lots of refactoring to make it easier to add new hardware support
 
 * prepare for adding mt76x0e (pci-e variant) support
 
 * add CONFIG_MT76x0E kconfig symbol
 
 brcmfmac
 
 * add support CYW89342 mini-PCIe device
 
 * add 4-way handshake offload detection for FT-802.1X
 
 * enable NL80211_EXT_FEATURE_CQM_RSSI_LIST
 
 * fix for proper support of 160MHz bandwidth
 
 rtl8xxxu
 
 * add rtl8188ctv support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJbs6LVAAoJEG4XJFUm622b0sAH/1WLU433ZipgULs6PLULDz3/
 cFS4CSu9+Hewx9MKvdr+vgMoru70CkiFIZMJeo/oNqAtFb6TQhXPFz2Ci3K4Y6jK
 yZKATh9PvzQrOGQ1iy4p8QK6bQ9WRUNY5+elJuNQH62oB/SZ0XqCMU8ujUQRSaTC
 xVqfIRnAtKcchAm/nqxx+EwlGCiUmlyt2pw2IUXXABLW7Fkj3Z3ISlOd8xVW6tca
 XyWlx9pjZOrFrgOzyORB/B4TNI5q5CdcYPg2DEpqOs6LQeGXEq4BSxfxCe2de4ku
 St6417K0OFTbUTZS7kJaxJnQFd1ZWhDtj5cJUzdNsSVzqeYeJoTnR4FBqDWLlec=
 =7Nmq
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2018-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.20

First set of new features for 4.20. mt76 driver is going through major
refactoring and that's why there are so many mt76 patches. iwlwifi is
also under heavy development and smaller changes to other drivers.

Also wireless-drivers was merged to fix a conflict between the two trees.

Major changes:

ath10k

* limit available channels via DT ieee80211-freq-limit

wil6210

* add 802.11r Fast Roaming support for AP and station modes

* add support for channel 4

iwlwifi

* new FW API handling

* some improvements in the PCI recovery mechanism

* enable a new scanning feature;

* continued work on HE (mostly radiotap)

* TKIP implementation in new devices

* work continues for new 22560 hardware

mt76

* add support for Alfa AWUS036ACM

* lots of refactoring to make it easier to add new hardware support

* prepare for adding mt76x0e (pci-e variant) support

* add CONFIG_MT76x0E kconfig symbol

brcmfmac

* add support CYW89342 mini-PCIe device

* add 4-way handshake offload detection for FT-802.1X

* enable NL80211_EXT_FEATURE_CQM_RSSI_LIST

* fix for proper support of 160MHz bandwidth

rtl8xxxu

* add rtl8188ctv support
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 11:46:29 -07:00
David S. Miller
d5486377b8 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2018-10-02

This series contains updates to ice driver only.

Anirudh expands the use of VSI handles across the rest of the driver,
which includes refactoring the code to correctly use VSI handles.  After
a reset, ensure that all configurations for a VSI get re-applied before
moving on to rebuilding the next VSI.

Dave fixed the driver to check the current link state after reset to
ensure that the correct link state of a port is reported.  Fixed an
issue where if the driver is unloaded when traffic is in progress,
errors are generated.

Preethi breaks up the IRQ tracker into a software and hardware IRQ
tracker, where the software IRQ tracker tracks only the PF's IRQ
requests and does not play any role in the VF initialization.  The
hardware IRQ tracker represents the device's interrupt space and will be
looked up to see if the device has run our of interrupts when a
interrupt has to be allocated in the device for either PF or VF.

Md Fahad adds support for enabling/disabling RSS via ethtool.

Brett aligns the ice_reset_req enum values to the values that the
hardware understands.  Also added initial support for dynamic interrupt
moderation in the ice driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 11:39:09 -07:00