Commit graph

982,081 commits

Author SHA1 Message Date
Can Guo
6b04526812 phy: General struct and field cleanup
Move MSM8996 specific PHY vreg list struct name to a genernal one as it is
used by all PHYs. Add a specific field to handle dual lane situation.

Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:14 +05:30
Can Guo
0d58280cf1 phy: Update PHY power control sequence
All PHYs should be powered on before register configuration starts. And
only PCIe PHYs need an extra power control before deasserts reset state.

Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:13 +05:30
Heiko Stuebner
63bd0f1922 phy: rockchip-usb: add usb-uart setup for rk3188
The rk3188 also supports bringing the uart2 out through
the usb dm+dp pins, so add the necessary setup for it.

rk3066 does not seem to support usb-uart functionality and this
particular phy was only used on older Rockchip socs, so this leaves
room for a bit of cleanup as well, as there most likely won't be new
additions in the driver.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:13 +05:30
Andreas Kemnade
6c7103aa02 phy: phy-twl4030-usb: fix denied runtime access
When runtime is not enabled, pm_runtime_get_sync() returns -EACCESS,
the counter will be incremented but the resume callback not called,
so enumeration and charging will not start properly.
To avoid that happen, disable irq on suspend and recheck on resume.

Practically this happens when the device is woken up from suspend by
plugging in usb.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:12 +05:30
Yoshihiro Shimoda
979b519c7a phy: renesas: rcar-gen3-usb2: add is_otg_channel to use "role" sysfs
Even if a board doesn't have otg pins connection, this hardware can
change the role by a register setting. So, this patch adds
"is_otg_channel" for it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:12 +05:30
Yoshihiro Shimoda
a602152c81 phy: renesas: rcar-gen3-usb2: add conditions for uses_otg_pins == false
If uses_otg_pins is set to false, this driver 1) should disable otg
related interruptions, and 2) should not get ID pin signal, to avoid
unexpected behaviors. So, this patch adds conditions for it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:11 +05:30
Yoshihiro Shimoda
73801b90a3 phy: renesas: rcar-gen3-usb2: change a condition "dr_mode"
This patch changes a condition about dr_mode. If a device node has
any dr_mode ("host", "peripheral" or "otg"), this driver allows to
set "is_otg_channel" to true. Also, this patch keeps the dr_mode
value for future use.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:11 +05:30
Yoshihiro Shimoda
7ab0305d4d phy: renesas: rcar-gen3-usb2: unify OBINTEN handling
This patch unifies the OBINTEN handling to clean-up the code.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:10 +05:30
Yoshihiro Shimoda
8dde0008ff phy: renesas: rcar-gen3-usb2: Check a property to use otg pins
Since All R-Car Gen3 SoCs have dedicated otg pins actually but
some boards don't use the otg pins (e.g. R-Car D3 Draak and R-Car E3
Ebisu), the driver should not choose SoC model base by using
rcar_gen3_phy_usb2_match_table's data. So, this patch checks a
"renesas,no-otg-pins" property to set the "uses_otg_pins".

Note that since r8a77995-draak.dts and r8a77990-ebisu.dts don't have
'dr_mode = "otg";' for now, if we apply this patch, no behavior
changes (the value of "uses_otg_pins" is false).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:10 +05:30
Yoshihiro Shimoda
cfdc66348e phy: renesas: rcar-gen3-usb2: Rename has_otg_pins to uses_otg_pins
Since R-Car E3 and D3 have dedicated otg pins actually, "has_otg_pins"
is possible to misread in the future. So, this patch renames
has_otg_pins to uses_otg_pins.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:09 +05:30
Yoshihiro Shimoda
09938ea9d1 phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs
This patch fixes and issue that the vbus_ctrl is disabled by
rcar_gen3_init_from_a_peri_to_a_host(), so a usb host cannot
supply the vbus.

Note that this condition will exit when the otg irq happens
even if we don't apply this patch.

Fixes: 9bb86777fb ("phy: rcar-gen3-usb2: add sysfs for usb role swap")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:09 +05:30
Yoshihiro Shimoda
1582b76286 dt-bindings: rcar-gen3-phy-usb2: add no-otg-pins property
This patch adds a new optional property "renesas,no-otg-pins" which
a board does not provide proper otg pins.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:09 +05:30
Florian Fainelli
7b69fa1c5c phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence
The BCM63138 SATA PHY requires a special initialization sequence in
order to operate correctly, mostly tuning incorrect default values.
Implement that sequence and match the documented compatible string as an
entry point into that sequence.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:08 +05:30
Florian Fainelli
26728df4b2 phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs
Broadcom ARM-based DSL SoCs (BCM63xx product line) have the same
Broadcom SATA PHY that other SoCs are using, make it possible to select
that driver on these platforms.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:08 +05:30
Florian Fainelli
a575388a9f dt-bindings: phy: Document BCM63138 compatible string
Document the compatible string "brcm,bcm63138-sata-phy" as a valid
compatible string describing the standard Broadcom SATA PHY block.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:08 +05:30
Kunihiko Hayashi
c6d9b13241 phy: socionext: add PCIe PHY driver support
Add a driver for PHY interface built into PCIe controller implemented
in UniPhier SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:07 +05:30
Kunihiko Hayashi
74c60cd96b dt-bindings: phy: add UniPhier PCIe PHY description
Add DT bindings for PHY interface built into PCIe controller implemented
in UniPhier SoCs.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:07 +05:30
Rob Herring
ac9ba7dc86 phy: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:07 +05:30
Fabrizio Castro
fcd0eec4f5 dt-bindings: rcar-gen3-phy-usb3: Add r8a774a1 support
Document RZ/G2M (R8A774A1) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:07 +05:30
Fabrizio Castro
ad05573080 dt-bindings: rcar-gen3-phy-usb2: Add r8a774a1 support
Document RZ/G2M (R8A774A1) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 16:10:07 +05:30
Daniel Kurtz
b85bfa246e pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type
From the AMD BKDG, if WAKE_INT_MASTER_REG.MaskStsEn is set, a software
write to the debounce registers of *any* gpio will block wake/interrupt
status generation for *all* gpios for a length of time that depends on
WAKE_INT_MASTER_REG.MaskStsLength[11:0].  During this period the Interrupt
Delivery bit (INTERRUPT_ENABLE) will read as 0.

In commit 4c1de0414a ("pinctrl/amd: poll InterruptEnable bits in
enable_irq") we tried to fix this same "gpio Interrupts are blocked
immediately after writing debounce registers" problem, but incorrectly
assumed it only affected the gpio whose debounce was being configured
and not ALL gpios.

To solve this for all gpios, we move the polling loop from
amd_gpio_irq_enable() to amd_gpio_irq_set_type(), while holding the gpio
spinlock.  This ensures that another gpio operation (e.g.
amd_gpio_irq_unmask()) can read a temporarily disabled IRQ and
incorrectly disable it while trying to modify some other register bits.

Fixes: 4c1de0414a pinctrl/amd: poll InterruptEnable bits in enable_irq
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25 12:39:19 +02:00
Nicolas Ferre
34d2a7db77 MAINTAINERS: sdhci: move the Microchip entry to proper location
All SDHCI controller drivers are gathered at the same place, add the
Microchip one there.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:31 +02:00
Nicolas Ferre
92de0f8845 MAINTAINERS: move former ATMEL entries to proper MICROCHIP location
Standardize the Microchip / Atmel entries with the same form and move them
so that they are all located at the same place, under the newer MICROCHIP
banner.
Only modifications to the titles of the entries are done in this patch.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:31 +02:00
Nicolas Ferre
ea70ba2b60 MAINTAINERS: remove the / ATMEL string from MICROCHIP entries
No need to keep this additional string as it can puzzle people
while adding new driver's entries.
Move the NAND entry to keep it alphabetically ordered.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:31 +02:00
Nicolas Ferre
92a19973b4 MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver
Add Eugen as co-maintainer with Ludovic of Microchip SAMA5D2-compatible
ADC driver.
Also add the binding documentation/include as file pattern.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:31 +02:00
Nicolas Ferre
f98107ddc5 MAINTAINERS: pwm: add entry for Microchip pwm driver
Add the entry that was missing for pwm-atmel.c driver. Add binding file
as well.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:31 +02:00
Nicolas Ferre
630cbf6811 MAINTAINERS: dmaengine: add files to Microchip dma entry
In Microchip DMA (HDMA actually) entry, add the missing files for
better matching with get_maintainer.pl tool.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:30 +02:00
Nicolas Ferre
4d6465d98c MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver
Hand over this USB gadget driver to Cristian: atmel_usba.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:30 +02:00
Nicolas Ferre
78977b296a MAINTAINERS: ASoC: change maintainer for Microchip ALSA drivers
Hand over to Codrin for Microchip Audio SoC drivers in "atmel"
directory.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:30 +02:00
Nicolas Ferre
482232e27d MAINTAINERS: media: change Microchip ISI, ISC maintainers
For ISC, Songjun is not with Microchip anymore, his address shouldn't be
reachable.
For ISI, Eugen can handle the maintenance now.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:30 +02:00
Nicolas Ferre
5db8a02fd8 MAINTAINERS: update entry for Microchip NAND driver support
Replace the Microchip/Atmel NAND controller driver maintainer
by removing Josh and adding Tudor.

Cc: Josh Wu <rainyfeeling@outlook.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:30 +02:00
Nicolas Ferre
d7bbc7b759 MAINTAINERS: ARM: at91: add co-maintainer for ARM/Microchip
Add Ludovic as a new co-maintainer for the AT91 Microchip ARM
sub-architecture.
Add the newly created kernel.org group git tree that we will use
from now on.

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:29 +02:00
zhong jiang
95590a6286 ARM: at91: pm: call put_device instead of of_node_put in at91_pm_config_ws
of_find_device_by_node takes a reference to the struct device when it
finds a match via get_device. but it fails to put_device in
at91_pm_config_ws, for_each_matching_node_and_match will get and put
the node properly, there is no need to call the of_put_node. Therefore,
just call put_device instead of of_node_put in at91_pm_config_ws.

Fixes: d7484f5c6b ("ARM: at91: pm: configure wakeup sources for ULP1 mode")
Suggested-by: Claudiu Beznea <Claudiu.Beznea@microchip.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:17 +02:00
YueHaibing
0751736905 EDAC, i7core: Remove set but not used variable pvt
Remove the unused local variable pvt:

  drivers/edac/i7core_edac.c: In function 'i7core_mce_check_error':
  drivers/edac/i7core_edac.c:1818:21: warning: variable 'pvt' set but not used \
	  [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1537841043-108267-1-git-send-email-yuehaibing@huawei.com
2018-09-25 12:02:28 +02:00
Vignesh R
726d75a6d2 PCI: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode
Errata i870 is applicable in both EP and RC mode. Therefore rename
function dra7xx_pcie_ep_unaligned_memaccess(), that implements errata
workaround, to dra7xx_pcie_unaligned_memaccess() and call it for both RC
and EP. Make sure driver probe does not fail in case the workaround is not
applied for RC mode in order to maintain DT backward compatibility.

Reported-by: Chris Welch <Chris.Welch@viavisolutions.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
[lorenzo.pieralisi@arm.com: reworded the log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25 10:53:10 +01:00
Vignesh R
e3336a18ff dt-bindings: PCI: dra7xx: Add bindings for unaligned access in host mode
Update device tree binding documentation of TI's dra7xx PCI controller
for enabling unaligned mem access as applicable not just in EP mode but
in host mode as well.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
2018-09-25 10:52:59 +01:00
Jagan Teki
f4e4453aa9 arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.

Jagan, tested on BPI-M64, OPI-Win, A64-Olinuxino, NPI-A64
Vasily, tested on pine64-lts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: squash all board patches altogether and change supply name]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-25 17:38:12 +08:00
Jagan Teki
e85f28e047 arm64: dts: allwinner: a64: Add display pipeline
Allwinner A64 have a display pipeline with 2 mixers/TCONs, the first
TCON is connected to LCD and the second is to HDMI.

The HDMI controller/PHY pair is similar to the one on H3/H5.

Add all required device tree nodes of the display pipeline, including
the TCON0 LCD one and the TCON1 HDMI one.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: refactor commit message and add 1st pipeline]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-09-25 17:38:07 +08:00
Noralf Trønnes
c3a8d6ea73 drm/zte: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-20-noralf@tronnes.org
2018-09-25 11:35:33 +02:00
Noralf Trønnes
233386d8f2 drm/vc4: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-19-noralf@tronnes.org
2018-09-25 11:35:06 +02:00
Noralf Trønnes
1e70d7a568 drm/tve200: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-18-noralf@tronnes.org
2018-09-25 11:34:24 +02:00
Noralf Trønnes
0f26e5ce3e drm/sti: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

If drm_fbdev_generic_setup() fails, an error is printed by the function.

drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-14-noralf@tronnes.org
2018-09-25 11:33:51 +02:00
Noralf Trønnes
30f7b5e7c2 drm/pl111: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-13-noralf@tronnes.org
2018-09-25 11:33:06 +02:00
Noralf Trønnes
f53705fd98 drm/imx: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

CONFIG_DRM_FBDEV_EMULATION wasn't honoured by the CMA helper, but it is by
drm_fb_helper.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-12-noralf@tronnes.org
2018-09-25 11:32:15 +02:00
Noralf Trønnes
9595809896 drm/arm/mali: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-10-noralf@tronnes.org
2018-09-25 11:31:29 +02:00
Noralf Trønnes
941e97c124 drm/arm/hdlcd: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-9-noralf@tronnes.org
2018-09-25 11:30:43 +02:00
Noralf Trønnes
6129369a96 drm/fb-helper: Improve error reporting in setup
Improve error reporting in drm_fb_helper_fbdev_setup() by printing the
error code. This is useful for drivers that choose to not fall over just
because fbdev doesen't work, but still wants clues to why it failed.
This way they don't have to provide an error message themselves.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-2-noralf@tronnes.org
2018-09-25 11:28:44 +02:00
Ingo Molnar
9835bf7ff8 perf/core improvements and fixes:
perf test:
 
 - Add watchpoint entry (Ravi Bangoria)
 
 Build fixes:
 
 - Initialize perf_data_file fd field to fix building the CTF (trace format)
   converter with with gcc 4.8.4 on Ubuntu 14.04 (Jérémie Galarneau)
 
 - Use -Wno-redundant-decls to build with PYTHON=python3 to
   build the python binding, fixing the build in systems such
   as Clear Linux (Arnaldo Carvalho de Melo)
 
 Hardware tracing:
 
 - Suppress AUX/OVERWRITE records (Alexander Shishkin)
 
 Infrastructure:
 
 - Adopt PTR_ERR_OR_ZERO from the kernel and use it in
   the bpf-loader instead of open coded equivalent (Ding Xiang)
 
 - Improve the event ordering code to make it clear and fix
   a bug related to freeing of events when using pipe mode
   from 'record' to 'inject' (Jiri Olsa)
 
 - Some prep work to facilitate per-cpu threads to write
   record data to per-cpu files (Jiri Olsa)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCW6JP9wAKCRCyPKLppCJ+
 J9vjAQDfizmUwoCqgZD4q9d9hIx1KWrFK5q6EJOPsY+l0288BQEAzgx3Q0c7zFS1
 WB0DjtGgEntudoH57vqsswrT7VPKPAE=
 =Ee8x
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.20-20180919' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

perf test improvements:

- Add watchpoint entry (Ravi Bangoria)

Build fixes:

- Initialize perf_data_file fd field to fix building the CTF (trace format)
  converter with with gcc 4.8.4 on Ubuntu 14.04 (Jérémie Galarneau)

- Use -Wno-redundant-decls to build with PYTHON=python3 to
  build the python binding, fixing the build in systems such
  as Clear Linux (Arnaldo Carvalho de Melo)

Hardware tracing improvements:

- Suppress AUX/OVERWRITE records (Alexander Shishkin)

Infrastructure changes:

- Adopt PTR_ERR_OR_ZERO from the kernel and use it in
  the bpf-loader instead of open coded equivalent (Ding Xiang)

- Improve the event ordering code to make it clear and fix
  a bug related to freeing of events when using pipe mode
  from 'record' to 'inject' (Jiri Olsa)

- Some prep work to facilitate per-cpu threads to write
  record data to per-cpu files (Jiri Olsa)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-25 11:20:01 +02:00
Greg Kroah-Hartman
2dd68cc7fd Merge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net
Dave writes:
  "Networking fixes:

  1) Fix multiqueue handling of coalesce timer in stmmac, from Jose
     Abreu.

   2) Fix memory corruption in NFC, from Suren Baghdasaryan.

   3) Don't write reserved bits in ravb driver, from Kazuya Mizuguchi.

   4) SMC bug fixes from Karsten Graul, YueHaibing, and Ursula Braun.

   5) Fix TX done race in mvpp2, from Antoine Tenart.

   6) ipv6 metrics leak, from Wei Wang.

   7) Adjust firmware version requirements in mlxsw, from Petr Machata.

   8) Fix autonegotiation on resume in r8169, from Heiner Kallweit.

   9) Fixed missing entries when dumping /proc/net/if_inet6, from Jeff
      Barnhill.

   10) Fix double free in devlink, from Dan Carpenter.

   11) Fix ethtool regression from UFO feature removal, from Maciej
       Żenczykowski.

   12) Fix drivers that have a ndo_poll_controller() that captures the
       cpu entirely on loaded hosts by trying to drain all rx and tx
       queues, from Eric Dumazet.

   13) Fix memory corruption with jumbo frames in aquantia driver, from
       Friedemann Gerold."

* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (79 commits)
  net: mvneta: fix the remaining Rx descriptor unmapping issues
  ip_tunnel: be careful when accessing the inner header
  mpls: allow routes on ip6gre devices
  net: aquantia: memory corruption on jumbo frames
  tun: remove ndo_poll_controller
  nfp: remove ndo_poll_controller
  bnxt: remove ndo_poll_controller
  bnx2x: remove ndo_poll_controller
  mlx5: remove ndo_poll_controller
  mlx4: remove ndo_poll_controller
  i40evf: remove ndo_poll_controller
  ice: remove ndo_poll_controller
  igb: remove ndo_poll_controller
  ixgb: remove ndo_poll_controller
  fm10k: remove ndo_poll_controller
  ixgbevf: remove ndo_poll_controller
  ixgbe: remove ndo_poll_controller
  bonding: use netpoll_poll_dev() helper
  netpoll: make ndo_poll_controller() optional
  rds: Fix build regression.
  ...
2018-09-25 11:19:49 +02:00
Ingo Molnar
fb437bc8fe This is the 4.19-rc5 stable release
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAlunyjMACgkQONu9yGCS
 aT52HhAA0JU7E88QPZ1gSxc1ifTaIlHXhLQSvQKAXOhIvHDwj4tEKDqPhpCN/dWX
 /o/xaUf36gU0VzUD/1IyEiMFmJEeFKnfvN5SZYZLk8uSrd4swqaY8mSueZxNEDz4
 YNK9ugI/tPztuuz7I6KrO1iVquY1WlnECxc9FH76wvHsit8Sr3PvzhR+CVrOi+8p
 k3cpWlhHiOzT/3K3Wv2Et+oh+U+myKtQTlJDSe3fMx5chksJpBmsV/IDEtsLNZfz
 3v25fHz5a3DOYqKkGJaDrbLyPNC85249B+CiXqbXvfOAHDVkMwYqcxYUG+YZ5cpm
 U0OShLXm67dz8vT9cxqOSguCliPRlM9W5+EKzmVT7l8+ycds3BuEEHg1xWPrJWgG
 7XO10HkhZl+VvnJCj54KaszMUOdpvdEQSUs82gAFxjPbQIx5gosN9O0H+DnirMhS
 6VtzS20ZoIzjd4YVkRoLNcobHB4bZVTNXZ1Zi3C/neP9pxUjhOk0y+Vr/crC5Xph
 3TykIMgiVa+CdvQ/f4LOSiCgTFhF0tLGtfDQTG7f+9+W5pMc4NKSLi8EOMlJtYEy
 wsCYZ7/T9ElgrEzFvlxSvDwiPUhcldNao/EGdRYvMxXtgj0Ctw8LhR/2YKkqo6LK
 oMoKKWkj0o7uKSHKq+dakS0FprKnBnvE2Y+XA4SO/saPGFlDAVc=
 =OFJh
 -----END PGP SIGNATURE-----

Merge tag 'v4.19-rc5' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-25 11:19:44 +02:00