Commit graph

982,081 commits

Author SHA1 Message Date
Jason Gunthorpe
be7a57b41a RDMA/umem: Handle a half-complete start/end sequence
mmu_notifier_unregister() can race between a invalidate_start/end and
cause the invalidate_end to be skipped. This causes an imbalance in the
locking, which lockdep complains about.

This is not actually a bug, as we immediately kfree the memory holding the
lock, but it simple enough to fix.

Mark when the notifier is being destroyed and abort the start callback.
This can be done under the lock we already obtained, and can re-purpose
the invalidate_range test we already have.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-21 11:58:36 -04:00
Jason Gunthorpe
ca748c39ea RDMA/umem: Get rid of per_mm->notifier_count
This is intrinsically racy and the scheme is simply unnecessary. New MR
registration can wait for any on going invalidation to fully complete.

      CPU0                              CPU1
                                  if (atomic_read())
 if (atomic_dec_and_test() &&
     !list_empty())
  { /* not taken */ }
                                       list_add()

Putting the new UMEM into some kind of purgatory until another invalidate
rolls through..

Instead hold the read side of the umem_rwsem across the pair'd start/end
and get rid of the racy 'deferred add' approach.

Since all umem's in the rbt are always ready to go, also get rid of the
mn_counters_active stuff.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-21 11:58:36 -04:00
Jason Gunthorpe
f27a0d50a4 RDMA/umem: Use umem->owning_mm inside ODP
Since ODP had a single struct mmu_notifier located in the ucontext it
could only handle a single MM at a time, and this prevented it from using
the new owning_mm system.

With the prior rework it is now simple to let ODP track multiple MMs per
ucontext, finish the job so that the per_mm is allocated on a mm by mm
basis, and freed when the last umem is dropped from the ucontext.

As a side effect the new saner locking removes the lockdep splat about
nesting the umem_rwsem between mmu_notifier_unregister and
ib_umem_odp_release.

It also makes ODP work with multiple processes, across, fork, etc.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-21 11:58:36 -04:00
Vlad Buslov
ec3ed293e7 net_sched: change tcf_del_walker() to take idrinfo->lock
Action API was changed to work with actions and action_idr in concurrency
safe manner, however tcf_del_walker() still uses actions without taking a
reference or idrinfo->lock first, and deletes them directly, disregarding
possible concurrent delete.

Change tcf_del_walker() to take idrinfo->lock while iterating over actions
and use new tcf_idr_release_unsafe() to release them while holding the
lock.

And the blocking function fl_hw_destroy_tmplt() could be called when we
put a filter chain, so defer it to a work queue.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
[xiyou.wangcong@gmail.com: heavily modify the code and changelog]
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 08:55:05 -07:00
Jason Gunthorpe
c9990ab39b RDMA/umem: Move all the ODP related stuff out of ucontext and into per_mm
This is the first step to make ODP use the owning_mm that is now part of
struct ib_umem.

Each ODP umem is linked to a single per_mm structure, which in turn, is
linked to a single mm, via the embedded mmu_notifier. This first patch
introduces the structure and reworks eveything to use it.

This also needs to introduce tgid into the ib_ucontext_per_mm, as
get_user_pages_remote() requires the originating task for statistics
tracking.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-21 11:54:46 -04:00
Jason Gunthorpe
597ecc5a09 RDMA/umem: Get rid of struct ib_umem.odp_data
This no longer has any use, we can use container_of to get to the
umem_odp, and a simple flag to indicate if this is an odp MR. Remove the
few remaining references to it.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-21 11:54:46 -04:00
Jason Gunthorpe
41b4deeaa1 RDMA/umem: Make ib_umem_odp into a sub structure of ib_umem
These two structures are linked together, use the container_of pattern
instead of a double allocation to make the code simpler and easier to
follow.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-21 11:54:46 -04:00
Jason Gunthorpe
b5231b019d RDMA/umem: Use ib_umem_odp in all function signatures connected to ODP
All of these functions already require the ODP version of the umem struct,
make this very clear by having the signature require it. This paves the
way to using the container_of() pattern to link umem_odp and umem
together.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-21 11:54:46 -04:00
YueHaibing
69f8455f6c pinctrl: qcom: spmi-mpp: Fix err handling of pmic_mpp_set_mux
'ret' should be returned while pmic_mpp_write_mode_ctl fails.

Fixes: 0e948042c4 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 08:17:43 -07:00
Greg Kroah-Hartman
a27fb6d983 This pull request is slightly bigger than usual at this stage, but
I swear I would have sent it the same to Linus!  The main cause for
 this is that I was on vacation until two weeks ago and it took a while
 to sort all the pending patches between 4.19 and 4.20, test them and
 so on.
 
 It's mostly small bugfixes and cleanups, mostly around x86 nested
 virtualization.  One important change, not related to nested
 virtualization, is that the ability for the guest kernel to trap CPUID
 instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is now
 masked by default.  This is because the feature is detected through an
 MSR; a very bad idea that Intel seems to like more and more.  Some
 applications choke if the other fields of that MSR are not initialized
 as on real hardware, hence we have to disable the whole MSR by default,
 as was the case before Linux 4.12.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJbpPo1AAoJEL/70l94x66DdxgH/is0qe6ZBtzb6Qc0W+8mHHD7
 nxIkWAs2V5NsouJ750YwRQ+0Ym407+wlNt30acdBUEoXhrnA5/TvyGq999XvCL96
 upWEIxpIgbvTMX/e2nLhe4wQdhsboUK4r0/B9IFgVFYrdCt5uRXjB2G4ewxcqxL/
 GxxqrAKhaRsbQG9Xv0Fw5Vohh/Ls6fQDJcyuY1EBnbMpVenq2QDLI6cOAPXncyFb
 uLN6ov4GNCWIPckwxejri5XhZesUOsafrmn48sApShh4T6TrisrdtSYdzl+DGza+
 j5vhIEwdFO5kulZ3viuhqKJOnS2+F6wvfZ75IKT0tEKeU2bi+ifGDyGRefSF6Q0=
 =YXLw
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Paolo writes:
  "It's mostly small bugfixes and cleanups, mostly around x86 nested
   virtualization.  One important change, not related to nested
   virtualization, is that the ability for the guest kernel to trap
   CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is
   now masked by default.  This is because the feature is detected
   through an MSR; a very bad idea that Intel seems to like more and
   more.  Some applications choke if the other fields of that MSR are
   not initialized as on real hardware, hence we have to disable the
   whole MSR by default, as was the case before Linux 4.12."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits)
  KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs
  kvm: selftests: Add platform_info_test
  KVM: x86: Control guest reads of MSR_PLATFORM_INFO
  KVM: x86: Turbo bits in MSR_PLATFORM_INFO
  nVMX x86: Check VPID value on vmentry of L2 guests
  nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2
  KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv
  KVM: VMX: check nested state and CR4.VMXE against SMM
  kvm: x86: make kvm_{load|put}_guest_fpu() static
  x86/hyper-v: rename ipi_arg_{ex,non_ex} structures
  KVM: VMX: use preemption timer to force immediate VMExit
  KVM: VMX: modify preemption timer bit only when arming timer
  KVM: VMX: immediately mark preemption timer expired only for zero value
  KVM: SVM: Switch to bitmap_zalloc()
  KVM/MMU: Fix comment in walk_shadow_page_lockless_end()
  kvm: selftests: use -pthread instead of -lpthread
  KVM: x86: don't reset root in kvm_mmu_setup()
  kvm: mmu: Don't read PDPTEs when paging is not enabled
  x86/kvm/lapic: always disable MMIO interface in x2APIC mode
  KVM: s390: Make huge pages unavailable in ucontrol VMs
  ...
2018-09-21 16:21:42 +02:00
Miquel Raynal
f656c80157 arm64: dts: marvell: add thermal-zone node in cp110 DTSI file
Add a thermal-zone node and fill in all the sensors available in a
cp110 (only one in the thermal IP).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-21 16:13:36 +02:00
Miquel Raynal
a60bdfc0c1 arm64: dts: marvell: add macro to make distinction between node names
Because the label is different between CPs, the full path of a node is
unique. However, when referring to the end of the path only (the node
name), this name is not unique anymore.

The *thermal_zone_of_sensor_register() functions of the thermal core
present this limitation and prevent having a thermal-zone per CP.

Add a macro to make the distinction between node names to solve this
situation.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-21 16:13:30 +02:00
Miquel Raynal
3be148512e arm64: dts: marvell: add thermal-zone node in ap806 DTSI file
Add a thermal-zone node and fill in all the sensors available in an
ap806 (one in the IC plus one per CPU).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-21 16:13:24 +02:00
Miquel Raynal
0863e01c39 arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon
New bindings impose to declare the thermal IP from within a new syscon.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-21 16:12:59 +02:00
Rob Herring
1ba23b1df0 ARM: dts: stm32: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'qspi'. Fixing the
name enables dtc SPI bus checks.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-21 16:09:52 +02:00
Baruch Siach
e807f02981 ARM: dts: clearfog: fix sdhci supply property name
The vmmc phandle, like all power supply property names, must have the
'-supply' suffix.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-21 16:06:08 +02:00
Eric W. Biederman
f383d8b4ae signal/powerpc: Use force_sig_fault where appropriate
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:53:56 +02:00
Eric W. Biederman
77c70728db signal/powerpc: Simplify _exception_pkey by using force_sig_pkuerr
Call force_sig_pkuerr directly instead of rolling it by hand
in _exception_pkey.

Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:53:00 +02:00
Eric W. Biederman
5d8fb8a586 signal/powerpc: Specialize _exception_pkey for handling pkey exceptions
Now that _exception no longer calls _exception_pkey it is no longer
necessary to handle any signal with any si_code.  All pkey exceptions
are SIGSEGV with paired with SEGV_PKUERR.  So just handle
that case and remove the now unnecessary parameters from _exception_pkey.

Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:52:43 +02:00
Eric W. Biederman
c1c7c85cea signal/powerpc: Call force_sig_fault from _exception
The callers of _exception don't need the pkey exception logic because
they are not processing a pkey exception.  So just call exception_common
directly and then call force_sig_fault to generate the appropriate siginfo
and deliver the appropriate signal.

Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:50:40 +02:00
Eric W. Biederman
2c44ce285f signal/powerpc: Factor the common exception code into exception_common
It is brittle and wrong to populate si_pkey when there was not a pkey
exception.  The field does not exist for all si_codes and in some
cases another field exists in the same memory location.

So factor out the code that all exceptions handlers must run
into exception_common, leaving the individual exception handlers
to generate the signals themselves.

Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:50:26 +02:00
Eric W. Biederman
cd60ab7abb signal/powerpc: Remove pkey parameter from __bad_area_nosemaphore
Now that bad_key_fault_exception no longer calls __bad_area_nosemaphore
there is no reason for __bad_area_nosemaphore to handle pkeys.

Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:49:28 +02:00
Eric W. Biederman
8eb2ba25e3 signal/powerpc: Call _exception_pkey directly from bad_key_fault_exception
This removes the need for other code paths to deal with pkey exceptions.

Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:49:04 +02:00
Eric W. Biederman
9f2ee69389 signal/powerpc: Remove pkey parameter from __bad_area
There are no callers of __bad_area that pass in a pkey parameter so it makes
no sense to take one.

Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:48:44 +02:00
Eric W. Biederman
f654fc07db signal/powerpc: Use force_sig_mceerr as appropriate
In do_sigbus isolate the mceerr signaling code and call
force_sig_mceerr instead of falling through to the force_sig_info that
works for all of the other signals.

Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:48:19 +02:00
Eric W. Biederman
0a996c1a3f signal/x86: Use force_sig_fault where appropriate
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:30:54 +02:00
Eric W. Biederman
419ceeb128 signal/x86: Pass pkey by value
Now that si_code == SEGV_PKUERR is the flag indicating that a pkey
is present there is no longer a need to pass a pointer to a local
pkey value, instead pkey can be passed more efficiently by value.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:29:57 +02:00
Greg Kroah-Hartman
0eba8697bc This pull request contains fixes for UBIFS:
- A wrong UBIFS assertion in mount code
 - Fix for a NULL pointer deref in mount code
 - Revert of a bad fix for xattrs
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAlukuf8WHHJpY2hhcmRA
 c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wRnyD/40jc4PA1pP3dJcXqdqwSeN+vJZ
 YWu307rE+giWWg6vRKa8zu3z614579UC7EE/I9miSrPNPYCi9VTLNzJGNMvn8aSf
 8seMrbhW0kz29T4YZ5fESr6x3hMsSdmIWZkPobruul8oBGmNcUm3Ag3MBM4XbQTm
 5AcWUdXVQUXPROK/Xm04hNa5pJ6wkSu5CxA+mf9YM2ZYYPPdCblxxq3NsDX99vDw
 gZup7JndSzpk+IpZMQIEKUP83vh5YgCU06YPjXi5YIfXl+sQnpH0fyrWm3+1C0Yz
 4T80rd3fm+7+obXdAI29mhcoZ09fGayozfqjU/fV3edW43+pUvRWced13vuLqz9Q
 JannCFeN+v/nB6OPlj4JGkgNunZ5M3r6ZZIQBbY9RJuZgG0/FMbpYb62RY1z/jg9
 YA7e3J/R02i7tHnPbcIz6ngKE0c42VKxTdATaybXVunx5ZPip7txj9OeJbfIYUrr
 CbLMdiqIJUAAheHMUrTiF3jDNwEiMhBZA4dAGDvLmpLuyfMlN8Lwje9BdRd5VNKp
 zwEGUQkDWLxniFYLtmbceFSa4IQT6z70XJn1pqdDvgjxfp8trEqhtp9GMxA2u6TA
 adcug5gUzRWMQ2QuyoKIv6tkjmnII5N2KzhZH9hwBReRJUlKY9WQ9jowcGrPXhbw
 F2prIwBxp8drneOeKg==
 =CGLq
 -----END PGP SIGNATURE-----

Merge tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs

Richard writes:
  "This pull request contains fixes for UBIFS:
   - A wrong UBIFS assertion in mount code
   - Fix for a NULL pointer deref in mount code
   - Revert of a bad fix for xattrs"

* tag 'upstream-4.19-rc4' of git://git.infradead.org/linux-ubifs:
  Revert "ubifs: xattr: Don't operate on deleted inodes"
  ubifs: drop false positive assertion
  ubifs: Check for name being NULL while mounting
2018-09-21 15:29:44 +02:00
Eric W. Biederman
b4fd52f25c signal/x86: Replace force_sig_info_fault with force_sig_fault
Now that the pkey handling has been removed force_sig_info_fault and
force_sig_fault perform identical work.  Just the type of the address
paramter is different.  So replace calls to force_sig_info_fault with
calls to force_sig_fault, and remove force_sig_info_fault.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:26:24 +02:00
Dongdong Liu
7265b3d9dd arm64: defconfig: Enable PCIEPORTBUS
PCIe features like AER, Hotplug, PME, DPC depend on PCIEPORTBUS,
so enable PCIEPORTBUS as default.

Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-21 14:12:42 +01:00
Zhou Wang
ed0341ebe2 arm64: defconfig: enable HiSilicon HNS3 driver
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-21 14:11:30 +01:00
Eric W. Biederman
9db812dbb2 signal/x86: Call force_sig_pkuerr from __bad_area_nosemaphore
There is only one code path that can generate a pkuerr signal.  That
code path calls __bad_area_nosemaphore and can be dectected by testing
if si_code == SEGV_PKUERR.  It can be seen from inspection that all of
the other tests in fill_sig_info_pkey are unnecessary.

Therefore call force_sig_pkuerr directly from __bad_area_semaphore and
remove fill_sig_info_pkey.

At the same time move the comment above force_sig_info_pkey into
bad_area_access_error, so that the documentation about pkey generation
races is not lost.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 15:03:05 +02:00
Yannick Fertré
4c736c22d9 ARM: multi_v7_defconfig: enable backlight gpio
Enable generic GPIO based backlight driver.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-21 14:59:29 +02:00
Yannick Fertré
2823af0107 ARM: multi_v7_defconfig: enable panels OTM8009A and RM68200
Enable panel OTM8009A and panel raydium RM68200 as loadable modules.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-21 14:59:29 +02:00
Yannick Fertré
8322f97521 ARM: multi_v7_defconfig: enable STM32 DRM and MIPI DSI support
Enable DRM and MIPI DSI support for STMicroelectronics as loadable module.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-21 14:59:28 +02:00
Amelie Delaunay
0ec42ee63c ARM: multi_v7_defconfig: enable STM32 SPI
Enable the STM32 SPI driver, implemented on STM32MP1 SoC.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-21 14:59:28 +02:00
Yannick Fertré
67330599f9 ARM: dts: stm32: enable display on stm32mp157c-ev1 board
Enable panel raydium RM68200, DSI bridge & display controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-09-21 14:58:41 +02:00
Eric W. Biederman
aba1ecd32c signal/x86: Pass pkey not vma into __bad_area
There is only one caller of __bad_area that passes in PKUERR and thus
will generate a siginfo with si_pkey set.  Therefore simplify the
logic and hoist reading of vma_pkey up into that caller, and just
pass *pkey into __bad_area.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:54:17 +02:00
zhong jiang
98e616fe7c ieee802154: remove unecessary condition check before debugfs_remove_recursive
debugfs_remove_recursive has taken IS_ERR_OR_NULL into account. So just
remove the condition check before debugfs_remove_recursive.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-09-21 14:53:04 +02:00
Eric W. Biederman
988bbc7b1a signal/x86: Don't compute pkey in __do_page_fault
There are no more users of the computed pkey value in __do_page_fault
so stop computing the value.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:52:12 +02:00
Eric W. Biederman
25c102d803 signal/x86: Remove pkey parameter from mm_fault_error
After the previous cleanups to do_sigbus and and bad_area_nosemaphore
mm_fault_error no now longer uses it's pkey parameter.  Therefore
remove the unused parameter.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:51:42 +02:00
Eric W. Biederman
27274f731c signal/x86: Remove the pkey parameter from do_sigbus
The function do_sigbus never sets si_code to PKUERR so it can never
return a pkey to userspace.  Therefore remove the unusable pkey
parameter from do_sigbus.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:48:44 +02:00
Eric W. Biederman
768fd9c69b signal/x86: Remove pkey parameter from bad_area_nosemaphore
The function bad_area_nosemaphore always sets si_code to SEGV_MAPERR
and as such can never return a pkey parameter.  Therefore remove the
unusable pkey parameter from bad_area_nosemaphore.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:48:04 +02:00
Eric W. Biederman
164881b614 signal/x86/traps: Simplify trap generation
Update the DO_ERROR macro to take si_code and si_addr values for a siginfo,
removing the need for the fill_trap_info function.

Update do_trap to also take the sicode and si_addr values for a sigininfo
and modify the code to call force_sig when a sicode is not passed in
and to call force_sig_fault when all of the information is present.

Making this a more obvious, simpler and less error prone construction.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:47:49 +02:00
Eric W. Biederman
afe8448c0d signal/x86/traps: Use force_sig instead of open coding it.
The function "force_sig(sig, tsk)" is equivalent to "
force_sig_info(sig, SEND_SIG_PRIV, tsk)".  Using the siginfo variants can
be error prone so use the simpler old fashioned force_sig variant,
and with luck the force_sig_info variant can go away.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:47:01 +02:00
Eric W. Biederman
851ce9e697 signal/x86/traps: Use force_sig_bnderr
Instead of generating the siginfo in x86 specific code use the new
helper function force_sig_bnderr to separate the concerns of
collecting the information and generating a proper siginfo.

Making the code easier to understand and maintain.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:46:27 +02:00
Eric W. Biederman
79e21d6540 signal/x86/traps: Move more code into do_trap_no_signal so it can be reused
The function do_trap_no_signal embodies almost all of the work of the
function do_trap.  The exceptions are setting of thread.error_code and
thread.trap_nr in the case when the signal will be sent, and reporting
which signal will be sent with show_signal.

Filling in struct siginfo and then calling do_trap is problematic as
filling in struct siginfo is an fiddly process that can through
inattention has resulted in fields not initialized and the wrong
fields being filled in.

To avoid this error prone situation I am replacing force_sig_info with
a set of functions that take as arguments the information needed to
send a specific kind of signal.

The function do_trap is called in the context of several different
kinds of signals today.  Having a solid do_trap_no_signal that
can be reused allows call sites that send different kinds of
signals to reuse all of the code in do_trap_no_signal.

Modify do_trap_no_signal to have a single exit there signals
where be sent (aka returning -1) to allow more of the signal
sending path to be moved to from do_trap to do_trap_no_signal.

Move setting thread.trap_nr and thread.error_code into do_trap_no_signal
so the code does not need to be duplicated.

Make the type of the string that is passed into do_trap_no_signal to
const.  The only user of that str is die and it already takes a const
string, so this just makes it explicit that the string won't change.

All of this prepares the way for using do_trap_no_signal outside
of do_trap.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-21 14:45:22 +02:00
Borislav Petkov
7401a633c3 x86/mce-inject: Reset injection struct after injection
Clear the MCE struct which is used for collecting the injection details
after injection.

Also, populate it with more details from the machine.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20180905081954.10391-1-bp@alien8.de
2018-09-21 14:28:37 +02:00
Andrew Murray
0b8af74549 arm64: Remove unused VGA console support
Support for VGA_CONSOLE is not allowable due to commit ee23794b86
("video: vgacon: Don't build on arm64"), thus remove the associated
unused code.

Whilst PCI on arm64 would support VGA a valid screen_info structure
is missing.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-21 12:12:24 +01:00
Chris Packham
f2aeded4a6 ARM: dts: mvebu: add "marvell,prestera" to PP nodes
The compatible string "marvell,prestera" allows drivers to have code
common to any prestera variant.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-09-21 13:07:46 +02:00