In order to improve code maintainability and compatibility,
add support to query the device capability by expanding the
existing version query command. The device capability refers
to the features supported by the device.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fibre device of PCI revision 0x20 don't support autoneg, and the ops
get_autoneg() return AUTONEG_DISABLE so function hns3_nway_reset()
will return earlier than judging PCI revision.
Function hclge_handle_rocee_ras_error() don't need to judge PCI
revision again because its caller hclge_handle_hw_ras_error() has
judged once.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To better identify the device version, struct hnae3_handle adds a
member dev_version to replace pci revision. The dev_version consists
of hardware version and PCI revision. The hardware version is queried
from firmware by an existing firmware version query command.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If mlxsw_sp_acl_tcam_group_id_get() fails, the mutex initialized earlier
is not destroyed.
Fix this by initializing the mutex after calling the function. This is
symmetric to mlxsw_sp_acl_tcam_group_del().
Fixes: 5ec2ee28d2 ("mlxsw: spectrum_acl: Introduce a mutex to guard region list updates")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build error by selecting MDIO_DEVRES for MDIO_THUNDER.
Fixes this build error:
ld: drivers/net/phy/mdio-thunder.o: in function `thunder_mdiobus_pci_probe':
drivers/net/phy/mdio-thunder.c:78: undefined reference to `devm_mdiobus_alloc_size'
Fixes: 379d7ac7ca ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: netdev@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace commas with semicolons. What is done is essentially described by
the following Coccinelle semantic patch (http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Switching the DMAR and HPET MSI code to use the generic MSI domain ops
missed to add the flag which tells the core code to update the domain
operations with the defaults. As a consequence the core code crashes
when an interrupt in one of those domains is allocated.
Add the missing flags.
Fixes: 9006c133a4 ("x86/msi: Use generic MSI domain ops")
Reported-by: Qian Cai <cai@redhat.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87wo0fli8b.fsf@nanos.tec.linutronix.de
- Unbreak the magic 'search the timer interrupt' logic in IO/APIC code
which got wreckaged when the core interrupt code made the state
tracking logic stricter. That caused the interrupt line to stay masked
after switching from IO/APIC to PIC delivery mode, which obviously
prevents interrupts from being delivered.
- Make run_on_irqstack_code() typesafe. The function argument is a void
pointer which is then casted to 'void (*fun)(void *). This breaks
Control Flow Integrity checking in clang. Use proper helper functions
for the three variants reuqired.
-----BEGIN PGP SIGNATURE-----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=BcVu
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the x86 interrupt code:
- Unbreak the magic 'search the timer interrupt' logic in IO/APIC
code which got wreckaged when the core interrupt code made the
state tracking logic stricter.
That caused the interrupt line to stay masked after switching from
IO/APIC to PIC delivery mode, which obviously prevents interrupts
from being delivered.
- Make run_on_irqstack_code() typesafe. The function argument is a
void pointer which is then cast to 'void (*fun)(void *).
This breaks Control Flow Integrity checking in clang. Use proper
helper functions for the three variants reuqired"
* tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioapic: Unbreak check_timer()
x86/irq: Make run_on_irqstack_cond() typesafe
- Reset the TI/DM timer before enabling it instead of doing it the other
way round.
- Initialize the reload value for the GX6605s timer correctly so the
hardware counter starts at 0 again after overrun.
- Make error return value negative in the h8300 timer init function
-----BEGIN PGP SIGNATURE-----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=Htin
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A set of clocksource/clockevents updates:
- Reset the TI/DM timer before enabling it instead of doing it the
other way round.
- Initialize the reload value for the GX6605s timer correctly so the
hardware counter starts at 0 again after overrun.
- Make error return value negative in the h8300 timer init function"
* tag 'timers-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-gx6605s: Fixup counter reload
clocksource/drivers/timer-ti-dm: Do reset before enable
clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init()
Pinned pages shouldn't be write-protected when fork() happens, because
follow up copy-on-write on these pages could cause the pinned pages to
be replaced by random newly allocated pages.
For huge PMDs, we split the huge pmd if pinning is detected. So that
future handling will be done by the PTE level (with our latest changes,
each of the small pages will be copied). We can achieve this by let
copy_huge_pmd() return -EAGAIN for pinned pages, so that we'll
fallthrough in copy_pmd_range() and finally land the next
copy_pte_range() call.
Huge PUDs will be even more special - so far it does not support
anonymous pages. But it can actually be done the same as the huge PMDs
even if the split huge PUDs means to erase the PUD entries. It'll
guarantee the follow up fault ins will remap the same pages in either
parent/child later.
This might not be the most efficient way, but it should be easy and
clean enough. It should be fine, since we're tackling with a very rare
case just to make sure userspaces that pinned some thps will still work
even without MADV_DONTFORK and after they fork()ed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows copy_pte_range() to do early cow if the pages were pinned on
the source mm.
Currently we don't have an accurate way to know whether a page is pinned
or not. The only thing we have is page_maybe_dma_pinned(). However
that's good enough for now. Especially, with the newly added
mm->has_pinned flag to make sure we won't affect processes that never
pinned any pages.
It would be easier if we can do GFP_KERNEL allocation within
copy_one_pte(). Unluckily, we can't because we're with the page table
locks held for both the parent and child processes. So the page
allocation needs to be done outside copy_one_pte().
Some trick is there in copy_present_pte(), majorly the wrprotect trick
to block concurrent fast-gup. Comments in the function should explain
better in place.
Oleg Nesterov reported a (probably harmless) bug during review that we
didn't reset entry.val properly in copy_pte_range() so that potentially
there's chance to call add_swap_count_continuation() multiple times on
the same swp entry. However that should be harmless since even if it
happens, the same function (add_swap_count_continuation()) will return
directly noticing that there're enough space for the swp counter. So
instead of a standalone stable patch, it is touched up in this patch
directly.
Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This prepares for the future work to trigger early cow on pinned pages
during fork().
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(Commit message majorly collected from Jason Gunthorpe)
Reduce the chance of false positive from page_maybe_dma_pinned() by
keeping track if the mm_struct has ever been used with pin_user_pages().
This allows cases that might drive up the page ref_count to avoid any
penalty from handling dma_pinned pages.
Future work is planned, to provide a more sophisticated solution, likely
to turn it into a real counter. For now, make it atomic_t but use it as
a boolean for simplicity.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to a HW issue, in some scenarios the LAST bit might remain set.
This will cause an unexpected NACK after reading 16 bytes on the next
read.
Example: if user tries to read from a missing device, get a NACK,
then if the next command is a long read ( > 16 bytes),
the master will stop reading after 16 bytes.
To solve this, if a command fails, check if LAST bit is still
set. If it does, reset the module.
Fixes: 56a1485b10 (i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver)
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i.MX 7 DTSes use two compatibles so update the binding to fix
dtbs_check warnings like:
arch/arm/boot/dts/imx7d-cl-som-imx7.dt.yaml: i2c@30a20000:
compatible: ['fsl,imx7d-i2c', 'fsl,imx21-i2c'] is not valid under any of the given schemas (Possible causes of the failure):
arch/arm/boot/dts/imx7d-cl-som-imx7.dt.yaml: i2c@30a20000:
compatible: ['fsl,imx7d-i2c', 'fsl,imx21-i2c'] is too long
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional properties actually might appear (e.g. power-domains) so
describe all typical properties, reference generic i2c schema and use
unevaluatedProperties to fix dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml: i2c@30a20000:
'#address-cells', '#size-cells', 'pmic@25' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i.MX 8QXP DTSes use two compatibles so update the binding to fix
dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml: i2c@5a820000:
compatible: ['fsl,imx8qxp-lpi2c', 'fsl,imx7ulp-lpi2c'] is too long
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Additional properties actually might appear (e.g. power-domains) so
describe all typical properties, reference generic i2c schema and use
unevaluatedProperties to fix dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dt.yaml: i2c@5a800000:
'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dt.yaml: i2c@5a800000:
'touchscreen@2c' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If interrupt comes late, during probe error path or device remove (could
be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
i2c_imx_isr() will access registers with the clock being disabled. This
leads to external abort on non-linefetch on Toradex Colibri VF50 module
(with Vybrid VF5xx):
Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
Internal error: : 1008 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
(free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
(release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
(really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
(driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
(device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
(__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
(bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
(bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
(driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
(do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
(kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
(kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
Additionally, the i2c_imx_isr() could wake up the wait queue
(imx_i2c_struct->queue) before its initialization happens.
The resource-managed framework should not be used for interrupt handling,
because the resource will be released too late - after disabling clocks.
The interrupt handler is not prepared for such case.
Fixes: 1c4b6c3bcf ("i2c: imx: implement bus recovery")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add BlueField I2C driver to offer master and slave support for
Mellanox BlueField SoCs. The driver implements an SMBus adapter
and interfaces to multiple busses that can be probed using both
ACPI and Device Tree infrastructures.
The driver supports several SMBus operations to transfer data
back and forth from/to various I2C devices. It is mainly intended
to be consumed by userspace tools and utilities, such as i2c-tools
and decode-dimms to collect memory module information.
On the other hand, the driver has a slave function to support,
among others, an IPMB interface that requires both master and
slave functions to handle transfers between the BlueField SoC
and a board management controllers (e.g., BMC).
Signed-off-by: Khalil Blaiech <kblaiech@mellanox.com>
Reviewed-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- add support for masking sensitive data in VAIO EEPROMs
- set the nvmem TYPE to NVMEM_TYPE_EEPROM
- add support for the new 'label' property
- set the nvmem ID to NVMEM_DEVID_AUTO by default (for backward
compatibility) or to NVMEM_DEVID_NONE if label is defined
-----BEGIN PGP SIGNATURE-----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=KexW
-----END PGP SIGNATURE-----
Merge tag 'at24-updates-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.10
at24 updates for v5.10
- add support for masking sensitive data in VAIO EEPROMs
- set the nvmem TYPE to NVMEM_TYPE_EEPROM
- add support for the new 'label' property
- set the nvmem ID to NVMEM_DEVID_AUTO by default (for backward
compatibility) or to NVMEM_DEVID_NONE if label is defined
the i2c_ram structure is missing the sdmatmp field mentionned in
datasheet for MPC8272 at paragraph 36.5. With this field missing, the
hardware would write past the allocated memory done through
cpm_muram_alloc for the i2c_ram structure and land in memory allocated
for the buffers descriptors corrupting the cbd_bufaddr field. Since this
field is only set during setup(), the first i2c transaction would work
and the following would send data read from an arbitrary memory
location.
Fixes: 61045dbe9d ("i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllers")
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Fix missing 'kfree_const(cell->name)' when call to
nvmem_cell_info_to_nvmem_cell() in several places:
* after nvmem_cell_info_to_nvmem_cell() failed during
nvmem_add_cells()
* during nvmem_device_cell_{read,write} when cell->name is
kstrdup'ed() without calling kfree_const() at the end, but
really there is no reason to do that 'dup, because the cell
instance is allocated on the stack for some short period to be
read/write without exposing it to the caller.
So the new nvmem_cell_info_to_nvmem_cell_nodup() helper is introduced
which is used to convert cell_info -> cell without name duplication as
a lighweight version of nvmem_cell_info_to_nvmem_cell().
Fixes: e2a5402ec7 ("nvmem: Add nvmem_device based consumer apis.")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200923204456.14032-1-vadym.kochan@plvision.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for
vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than
actual font height calculated by con_font_set() from ioctl(PIO_FONT).
Since fbcon_set_font() from con_font_set() allocates minimal amount of
memory based on actual font height calculated by con_font_set(),
use of vt_resizex() can cause UAF/OOB read for font data.
VT_RESIZEX was introduced in Linux 1.3.3, but it is unclear that what
comes to the "+ more" part, and I couldn't find a user of VT_RESIZEX.
#define VT_RESIZE 0x5609 /* set kernel's idea of screensize */
#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */
So far we are not aware of syzbot reports caused by setting non-zero value
to v_vlin parameter. But given that it is possible that nobody is using
VT_RESIZEX, we can try removing support for v_clin and v_vlin parameters.
Therefore, this patch effectively makes VT_RESIZEX behave like VT_RESIZE,
with emitting a message if somebody is still using v_clin and/or v_vlin
parameters.
[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3
Reported-by: syzbot <syzbot+b308f5fd049fbbc6e74f@syzkaller.appspotmail.com>
Reported-by: syzbot <syzbot+16469b5e8e5a72e9131e@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4933b81b-9b1a-355b-df0e-9b31e8280ab9@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aarch64-linux-gnu-ld: drivers/tty/serial/imx_earlycon.o: in function `imx_uart_console_early_write':
imx_earlycon.c:(.text+0x84): undefined reference to `uart_console_write'
The driver uses the uart_console_write(), but SERIAL_CORE_CONSOLE is not
selected, so uart_console_write is not defined, then we get the error.
Fix this by selecting SERIAL_CORE_CONSOLE.
Fixes: 699cc4dfd1 ("tty: serial: imx: add imx earlycon driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20200919063240.2754965-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aarch64-linux-gnu-ld: drivers/tty/hvc/hvc_dcc.o: in function `dcc_early_write':
hvc_dcc.c:(.text+0x164): undefined reference to `uart_console_write'
The driver uses the uart_console_write(), but SERIAL_CORE_CONSOLE is not
selected, so uart_console_write is not defined, then we get the error.
Fix this by selecting SERIAL_CORE_CONSOLE.
Fixes: d1a1af2cdf ("hvc: dcc: Add earlycon support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20200919063535.2809707-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(struct scatterlist),flags)
...
sg_init_table(x,n)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1600601186-7420-2-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RZ/G2H (R8A774E1) SoC also has the R-Car gen3 compatible HSCIF ports,
so document the SoC specific bindings.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594230511-24790-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RZ/G2H (R8A774E1) SoC also has the R-Car gen3 compatible SCIF ports,
so document the SoC specific bindings.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1594230511-24790-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds a prototype to fix warning at W=1:
arch/mips/kernel/idle.c:126:13: error: no previous prototype for 'check_wait' [-Werror=missing-prototypes]
Signed-off-by: Pujin Shi <shipujin.t@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 515ce733e8 ("staging:r8188eu: Use lib80211 to encrypt (CCMP) tx frames")
was reverted because it caused scheduling while atomic bugs and hard
freezes. Experimentation showed that there were no freezes and no BUG
messages logged when lib80211_get_crypto_ops() was called directly
rather than indirectly through try_then_request_module().
Reapply "staging:r8188eu: Use lib80211 to encrypt (CCMP) tx frames"
with resolved revert conflicts and replace try_then_request_module()
with direct call to lib80211_get_crypto_ops().
Original commit message:
Put data to skb, decrypt with lib80211_crypt_ccmp, and place back to tx buffer.
Cc: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200927083535.2895-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime is no more a BayLibre employee, and his e-mail address is now
invalid.
I'll be happy to add him back using another e-mail address if he wants
to continue maintaining this driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function 'rkisp1_stream_start' calls 'rkisp1_set_next_buf'
which access the buffers, so the call should be protected by
taking the cap->buf.lock.
After this patch, all locks are reviewed and commented so remove
the TODO item "review and comment every lock"
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When locking, use either 'spin_lock' or 'spin_lock_irq'
according to the context. There is nowhere need to
use 'spin_lock_irqsave'.
Outside of irq context, always use 'spin_lock_irq'
to be on the safe side.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the function 'rkisp1_params_config_parameter' the lock
is taken while applying the default config. But the lock
only needs to protect the buffers list and the 'is_streaming'
field, so move the locking to lock only what is needed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The field stats->is_streaming is written in 'start_streaming' callback
without the stats->lock protection.
The isr might run together with the callback so 'spin_lock_irq'
should be used.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the architecture independent version of hyperv-tlfs.h, commit c55a844f46
removed the "X64" in the symbol names so they would make sense for both x86 and
ARM64. That commit added aliases with the "X64" in the x86 version of hyperv-tlfs.h
so that existing x86 code would continue to compile.
As a cleanup, update the x86 code to use the symbols without the "X64", then remove
the aliases. There's no functional change.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/1601130386-11111-1-git-send-email-jsalisbury@linux.microsoft.com
The signal RKISP1_CIF_ISP_FRAME_IN is not used in the isr so
there is no need to enable it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The signal RKISP1_CIF_ISP_FRAME is set when the ISP completes
outputting the frame to the next block in the pipeline.
In order to keep buffer synchronization we assume that the
RKISP1_CIF_ISP_V_START signal never arrives together with the
RKISP1_CIF_ISP_FRAME signal.
In case those signals arrive together then the code is not able to
tell if the RKISP1_CIF_ISP_FRAME signal relates to the frame of
the current v-start or the previous. This patch adds a WARN_ONCE
and a debugfs var to catch it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The isp.frame_sequence is now read only from the irq handlers
that are all fired from the same interrupt, so there is not need
for atomic operation.
In addition, the frame seq incrementation is moved from
rkisp1_isp_queue_event_sof to rkisp1_isp_isr to make the code
clearer and the incorrect inline comment is removed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The params isr is called when the ISP finishes processing a frame
(RKISP1_CIF_ISP_FRAME). Configurations performed in the params isr
will be applied on the next frame. Since frame_sequence is updated
on the vertical sync signal, we should use frame_sequence + 1 as
the vb.sequence of the params buffer to indicate to userspace on
which frame these parameters are being applied.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the first buffer queued in the params node is returned
immediately to userspace and a copy of it is saved in the field
'cur_params'. The copy is later used for the first configuration
when the stream is initiated by one of selfpath/mainpath capture nodes.
There are 3 problems with this implementation:
- The first params buffer is applied and returned to userspace even if
userspace never calls to streamon on the params node.
- If the first params buffer is queued after the stream started on the
params node then it will return to userspace but will never be used.
- The frame_sequence of the first buffer is set to -1 if the main/selfpath
did not start streaming.
A correct implementation is to apply the first params buffer when stream
is started from mainpath/selfpath and only if params is also streaming.
The patch adds a new function 'rkisp1_params_apply_params_cfg' which takes
a buffer from the buffers queue, apply it and returns it to userspace.
The function is called from the irq handler and when main/selfpath stream
starts - in the function 'rkisp1_params_config_parameter'
Also remove the fields 'cur_params', 'is_first_params' which are no
more needed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cproc (color processing) configuration needs to know if
an image effect is configured. The code uses the image effect
in 'cur_params' which is the first params buffer queued in the stream.
This is the wrong place to read the value. The value should be
taken from the current params buffer.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the code in the isr checks if the buffer list is not
empty before referencing a buffer and then check again if the
buffer is not NULL. Instead we can save one 'if' statement by
returning if the buffers list is empty.
Also remove non-helpful inline doc 'get one empty buffer'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The code in '.stop_streaming' callback releases and acquire the lock
at each iteration when returning the buffers.
Holding the lock disables interrupts so it should be minimized.
To make the code cleaner and still minimize holding the lock,
the buffer list is first moved to a local list and
then can be iterated without the lock.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
