No need to use variable found, we can determine whether the mode was
found by comparing iterator variable to its limit.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Register each LED immediately after parsing OF properties. This
simplifies the driver.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Use helper variable dev instead of always writing &pdev->dev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Return directly instead of setting result and breaking.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Rename variable led_dat to led in various functions.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This drivers leaks GPIO descriptors on driver removal. Use devres API
function devm_gpiod_get_from_of_node instead of gpiod_get_from_of_node
to avoid this.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Not-for-stable
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Move parsing of DT properties of one LED into separate function. This
saves indentation level and is nicer to read.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Move forward from platform data to device tree only.
Since commit c7896490dd ("leds: ns2: Absorb platform data") the
platform data structure is absorbed into the driver, because nothing
else in the source tree uses it. Since nobody complained and all usage
of this driver is via device tree, change the code to work with device
tree only. As Linus Walleij wrote, the device tree should be the
preferred way forward anyway.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Since .remove method is not needed now that we use devres, there is no
need to remember the number of LEDs in struct ns2_led_priv. Alloc simple
array of ns2_led_data structs.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
By using devres version of LED registering function we can remove the
.remove method from this driver. The probe method also gets simpler.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: David Rivshin <drivshin@allworx.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
We can return the last ret value.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Use helper variable dev instead of always writing &pdev->dev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Use helper variable dev instead of always writing &pdev->dev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Since init_data is passed with fwnode handle, we do not need to set
the of_node member of the newly created LED classdev.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Previously if the `label` DT property was not present, the code composed
name for the LED in the form
"max77650::"
For backwards compatibility we therefore set
init_data->default_label = ":";
so that the LED will not get a different name if `label` property is not
present.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Use helper variable dev instead of always writing &client->dev, or
&priv->client->dev, or even &led->priv->client->dev.
With one more line moved reverse christmas tree is also achieved.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Previously if the `label` DT property was not present, the code composed
name for the LED in the form
"parent_name::"
For backwards compatibility we therefore set
init_data->default_label = ":";
so that the LED will not get a different name if `label` property is not
present.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
By using struct led_init_data when registering we do not need to parse
`label` DT property. Moreover `label` is deprecated and if it is not
present but `color` and `function` are, LED core will compose a name
from these properties instead.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
These two drivers do not provide remove method and use devres for
allocation of other resources, yet they use led_classdev_register
instead of the devres variant, devm_led_classdev_register.
Fix this.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: stable@kernel.org
Fix OF node leaks by calling of_node_put in
for_each_available_child_of_node when the cycle breaks or returns.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Nikita Travkin <nikitos.tr@gmail.com>
Cc: Milo Kim <milo.kim@ti.com>
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Not-for-stable: untested, theoretical, insignificant leaks
Various drivers count and iterate over OF children nodes via
of_get_child_count and for_each_child_of_node. Instead they should use
of_get_available_child_count and for_each_available_child_of_node, so
that if a given node has the `status` property set to `disabled`, the
child will be ignored.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andrey Utkin <andrey_utkin@fastmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christian Mauderer <oss@c-mauderer.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: David Rivshin <drivshin@allworx.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Milo Kim <milo.kim@ti.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Nikita Travkin <nikitos.tr@gmail.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Philippe Retornaz <philippe.retornaz@epfl.ch>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Simon Guinot <sguinot@lacie.com>
Cc: Simon Shields <simon@lineageos.org>
Cc: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Cc: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The devm_led_classdev_register_ext is given init_data with fwnode set,
so the LED core sets .of_node of the new LED classdev correctly.
Do not rewrite this value to parent of_node.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
The dev_of_node function should be preferred.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Simply use device_get_match_data instead of matching against the match
table again.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: David Rivshin <drivshin@allworx.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Christian Mauderer <oss@c-mauderer.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
This driver can be compiled on other platforms with small change if
COMPILE_TEST=y.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
These drivers can be compiled without modification when COMPILE_TEST=y:
cobalt-qube, cobalt-raq, netxbig, ns2 and s3c24xx
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
If LEDs are configured through device tree and the property 'label' is
omitted, the label is supposed to be generated from the properties
'function' and 'color' if present. While this works fine for e.g. the
'leds-gpio' driver, it did not for 'leds-pwm'.
The reason is, you get this label naming magic only if you add a LED
device through 'devm_led_classdev_register_ext()' and pass a pointer to
the current device tree node.
For the following node from dts the LED appeared as 'led-5' in sysfs
before and as 'red:debug' after this change.
pwm_leds {
compatible = "pwm-leds";
led-5 {
function = LED_FUNCTION_DEBUG;
color = <LED_COLOR_ID_RED>;
pwms = <&pwm0 2 10000000 0>;
max-brightness = <127>;
linux,default-trigger = "heartbeat";
panic-indicator;
};
};
Signed-off-by: Alexander Dahl <post@lespocky.de>
Cc: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Starting from the JZ4725B SoC, the primary and overlay planes support
24-bit pixel modes (8 bits per color component, without dummy byte).
Add support for these in the ingenic-drm driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-8-paul@crapouillou.net
1. Clear unneeded L2C-310 flag which presenc was triggering warning
message.
2. Fix build of SAMSUNG_PM_DEBUG without MMU.
3. Minor cleanups and update of linux-samsung-soc mailing list in
Maintainers.
-----BEGIN PGP SIGNATURE-----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=Bkfy
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.10
1. Clear unneeded L2C-310 flag which presenc was triggering warning
message.
2. Fix build of SAMSUNG_PM_DEBUG without MMU.
3. Minor cleanups and update of linux-samsung-soc mailing list in
Maintainers.
* tag 'samsung-soc-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: exynos: clear L310_AUX_CTRL_NS_LOCKDOWN in default l2c_aux_val
Signed-off-by: Olof Johansson <olof@lixom.net>
Until now the ingenic-drm driver supported the same pixel formats on the
F0 and F1 planes, and across all SoCs. However, the F0 plane does support
paletted 8bpp, while the F1 plane doesn't.
Furthermore, the three SoCs currently supported all have different pixel
formats available; 24bpp was added in JZ4725B, 30bpp was added in
JZ4770.
Prepare the inclusion of paletted 8bpp, 24bpp and 30bpp support by
having separate pixel format lists for F0 and F1 planes.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-5-paul@crapouillou.net
Instead of calling dmam_alloc_coherent() once for each 4-bit DMA
hardware descriptor, we can have them both in a physical memory page, as
long as they are aligned to 16 bytes. This reduces memory consumption,
and will make it easier to add more DMA descriptors in the future.
Note that the old code would not create the F0 descriptor on SoCs that
don't support multiple planes. We don't care, because:
- we don't use more memory by allocating two descriptors instead of a
single one;
- the only SoC that does not support multiple planes (JZ4740) still has
two independent DMA channels, for an unknown reason.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-4-paul@crapouillou.net
Add support for static memory reserved from Device Tree. Since we're
using GEM buffers backed by CMA, it is interesting to have an option to
specify the CMA area where the GEM buffers will be allocated.
v2: Don't abort probe if reserved memory cannot be obtained. The driver
will still work fine provided the kernel configuration is sane.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-3-paul@crapouillou.net
Old Ingenic SoCs can overclock very well, up to +50% of their nominal
clock rate, whithout requiring overvolting or anything like that, just
by changing the rate of the main PLL. Unfortunately, all clocks on the
system are derived from that PLL, and when the PLL rate is updated, so
is our pixel clock.
To counter that issue, we make sure that the panel is in VBLANK before
the rate change happens, and we will then re-set the pixel clock rate
afterwards, once the PLL has been changed, to be as close as possible to
the pixel rate requested by the encoder.
v2: Add comment about mutex usage
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200926170501.1109197-2-paul@crapouillou.net
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
-----BEGIN PGP SIGNATURE-----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=oMmC
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.10
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
* tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
ARM: exynos_defconfig: enable platform media drivers
Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This pair of patches enable the ADMA, ACONNECT and AHUB drivers that
are required for audio support on Tegra210 and later.
-----BEGIN PGP SIGNATURE-----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=bB+p
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.10-rc1
This pair of patches enable the ADMA, ACONNECT and AHUB drivers that
are required for audio support on Tegra210 and later.
* tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
Link: https://lore.kernel.org/r/20200918150303.3938852-6-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This is a minor change that implements a BPMP workaround for pre-silicon
platforms and is needed to enable support for BPMP on Tegra234.
-----BEGIN PGP SIGNATURE-----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=Qpt9
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.10-rc1
This is a minor change that implements a BPMP workaround for pre-silicon
platforms and is needed to enable support for BPMP on Tegra234.
* tag 'tegra-for-5.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Enable BPMP support on Tegra234
Link: https://lore.kernel.org/r/20200918150303.3938852-3-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
These changes contain a bit of cleanup and chip support for the upcoming
Tegra234 SoC.
-----BEGIN PGP SIGNATURE-----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=kg9i
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.10-rc1
These changes contain a bit of cleanup and chip support for the upcoming
Tegra234 SoC.
* tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add Tegra234 support
soc/tegra: pmc: Reorder reset sources/levels definitions
soc/tegra: misc: Add Tegra234 support
soc/tegra: fuse: Add Tegra234 support
soc/tegra: fuse: Implement tegra_is_silicon()
soc/tegra: fuse: Extract tegra_get_platform()
Link: https://lore.kernel.org/r/20200918150303.3938852-2-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Uses cdev_device_add() instead of the cdev_add() device_add()
combination.
Initializes dev->groups instead of direct calls to sysfs_create_group()
and friends.
-----BEGIN PGP SIGNATURE-----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=Knzl
-----END PGP SIGNATURE-----
Merge tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
Simplify tee_device_register() and friends
Uses cdev_device_add() instead of the cdev_add() device_add()
combination.
Initializes dev->groups instead of direct calls to sysfs_create_group()
and friends.
* tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: avoid explicit sysfs_create/delete_group by initialising dev->groups
tee: replace cdev_add + device_add with cdev_device_add
Link: https://lore.kernel.org/r/20200918144130.GB1219771@jade
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add core support for the R-Car V3U (R8A779A0) SoC, including System
Controller (SYSC) and Reset (RST) support,
- Various Kconfig cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2ShfwAKCRCKwlD9ZEnx
cO6bAP4kuetjBmf+BxLGRxZTEin+8YQRd7p051UZKBMa4qp2lwD+JKhnasH1qv64
CWS3LV8FNumj2Gr1e3YdJcgwb+9p3gc=
=K/tj
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.10 (take two)
- Add core support for the R-Car V3U (R8A779A0) SoC, including System
Controller (SYSC) and Reset (RST) support,
- Various Kconfig cleanups.
* tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: r8a779a0-sysc: Add r8a779a0 support
soc: renesas: rcar-rst: Add support for R-Car V3U
soc: renesas: Identify R-Car V3U
soc: renesas: Sort driver description title
soc: renesas: Use ARM32/ARM64 for menu description
dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions
dt-bindings: power: Add r8a779a0 SYSC power domain definitions
Link: https://lore.kernel.org/r/20200918124800.15555-4-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- Make two local functions static.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX2Sh1wAKCRCKwlD9ZEnx
cE6SAP9Py6LDJgWL/Ztc0p/HbmiGrcMaNu+gA9o0xB6BZV95SQEAxbp3U9XI9rlK
2uIknxAjL6uA7Tr+GeKZpKPWA/rWLgc=
=l2HT
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-soc-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc
Renesas ARM SoC updates for v5.10
- Make two local functions static.
* tag 'renesas-arm-soc-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: rcar-gen2: Make rcar_gen2_{timer_init, reserve}() static
Link: https://lore.kernel.org/r/20200918124800.15555-3-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- ULP0 fast wakeup support
- PM cleanups
-----BEGIN PGP SIGNATURE-----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=GtAw
-----END PGP SIGNATURE-----
Merge tag 'at91-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc
AT91 SoC for 5.10
- ULP0 fast wakeup support
- PM cleanups
* tag 'at91-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: remove unnecessary at91sam9x60_idle
ARM: at91: pm: of_node_put() after its usage
ARM: at91: pm: add per soc validation of pm modes
ARM: at91: pm: add support for ULP0 fast wakeup
Link: https://lore.kernel.org/r/20200916211119.GA275438@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts commit 546c044c96.
Nothing prevents user from sending frames to "external" VxLAN devices.
In fact kernel itself may generate icmp chatter.
This is fine, such frames should be dropped.
The point of the "missing encapsulation" warning was that
frames with missing encap should not make it into vxlan_xmit_one().
And vxlan_xmit() drops them cleanly, so let it just do that.
Without this revert the warning is triggered by the udp_tunnel_nic.sh
test, but the minimal repro is:
$ ip link add vxlan0 type vxlan \
group 239.1.1.1 \
dev lo \
dstport 1234 \
external
$ ip li set dev vxlan0 up
[ 419.165981] vxlan0: Missing encapsulation instructions
[ 419.166551] WARNING: CPU: 0 PID: 1041 at drivers/net/vxlan.c:2889 vxlan_xmit+0x15c0/0x1fc0 [vxlan]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Three fixes: one in drivers (lpfc) and two for zoned block devices.
The latter also impinges on the block layer but only to introduce a
new block API for setting the zone model rather than fiddling with the
queue directly in the zoned block driver.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX29mRyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishabnAP48vMYD
/cjyGAJfq/0k/U/t6pRPc5tUm89LOWcOJz0SjwD/YXcQNz7mx8MxnypAV1jbWXR7
iyWkPMYVc4EJh7oTARE=
=SQhI
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes: one in drivers (lpfc) and two for zoned block devices.
The latter also impinges on the block layer but only to introduce a
new block API for setting the zone model rather than fiddling with the
queue directly in the zoned block driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: sd_zbc: Fix ZBC disk initialization
scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks
scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
-----BEGIN PGP SIGNATURE-----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=mBw7
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two fixes for regressions in this cycle, and one that goes to 5.8
stable:
- fix leak of getname() retrieved filename
- remove plug->nowait assignment, fixing a regression with btrfs
- fix for async buffered retry"
* tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
io_uring: ensure async buffered read-retry is setup properly
io_uring: don't unconditionally set plug->nowait = true
io_uring: ensure open/openat2 name is cleaned on cancelation
-----BEGIN PGP SIGNATURE-----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=e8oA
-----END PGP SIGNATURE-----
Merge tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"NVMe pull request from Christoph, and removal of a dead define.
- fix error during controller probe that cause double free irqs
(Keith Busch)
- FC connection establishment fix (James Smart)
- properly handle completions for invalid tags (Xianting Tian)
- pass the correct nsid to the command effects and supported log
(Chaitanya Kulkarni)"
* tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
block: remove unused BLK_QC_T_EAGAIN flag
nvme-core: don't use NVME_NSID_ALL for command effects and supported log
nvme-fc: fail new connections to a deleted host or remote port
nvme-pci: fix NULL req in completion handler
nvme: return errors for hwmon init
