This adds general supporting functions for filesystems that use
utf8 casefolding. It provides standard dentry_operations and adds the
necessary structures in struct super_block to allow this standardization.
The new dentry operations are functionally equivalent to the existing
operations in ext4 and f2fs, apart from the use of utf8_casefold_hash to
avoid an allocation.
By providing a common implementation, all users can benefit from any
optimizations without needing to port over improvements.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This adds a case insensitive hash function to allow taking the hash
without needing to allocate a casefolded copy of the string.
The existing d_hash implementations for casefolding allocate memory
within rcu-walk, by avoiding it we can be more efficient and avoid
worrying about a failed allocation.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
refcount_t type variable should never be less than one, so it's a
little bit hard to understand when we use it to indicate pending
compressed page count, let's change to use atomic_t for better
readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes below compile warning reported by LKP
(kernel test robot)
cppcheck warnings: (new ones prefixed by >>)
>> fs/f2fs/file.c:761:9: warning: Identical condition 'err', second condition is always false [identicalConditionAfterEarlyExit]
return err;
^
fs/f2fs/file.c:753:6: note: first condition
if (err)
^
fs/f2fs/file.c:761:9: note: second condition
return err;
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
then, we can add specified entry into rb-tree with 64-bits segment time
as key.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't let f2fs inner GC ruins original aging degree of segment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, once we update one block in segment, we will update mtime of
segment to last time, making aged segment becoming freshest, result in
that GC with cost benefit algorithm missing such segment, So this patch
changes to record mtime as average block updating time instead of last
updating time.
It's not needed to reset mtime for prefree segment, as se->valid_blocks
is zero, then old se->mtime won't take any weight with below calculation:
se->mtime = div_u64(se->mtime * se->valid_blocks + mtime,
se->valid_blocks + 1);
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previous implementation of aligned pinfile allocation will:
- allocate new segment on cold data log no matter whether last used
segment is partially used or not, it makes IOs more random;
- force concurrent cold data/GCed IO going into warm data area, it
can make a bad effect on hot/cold data separation;
In this patch, we introduce a new type of log named 'inmem curseg',
the differents from normal curseg is:
- it reuses existed segment type (CURSEG_XXX_NODE/DATA);
- it only exists in memory, its segno, blkofs, summary will not b
persisted into checkpoint area;
With this new feature, we can enhance scalability of log, special
allocators can be created for purposes:
- pure lfs allocator for aligned pinfile allocation or file
defragmentation
- pure ssr allocator for later feature
So that, let's update aligned pinfile allocation to use this new
inmem curseg fwk.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since DUMMY_WRITTEN_PAGE and ATOMIC_WRITTEN_PAGE have already been
converted as unsigned long type, we don't need do type casting again.
Signed-off-by: Xiaojun Wang <wangxiaojun11@huawei.com>
Reported-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
NVMe Zoned Namespace devices can have zone-capacity less than zone-size.
Zone-capacity indicates the maximum number of sectors that are usable in
a zone beginning from the first sector of the zone. This makes the sectors
sectors after the zone-capacity till zone-size to be unusable.
This patch set tracks zone-size and zone-capacity in zoned devices and
calculate the usable blocks per segment and usable segments per section.
If zone-capacity is less than zone-size mark only those segments which
start before zone-capacity as free segments. All segments at and beyond
zone-capacity are treated as permanently used segments. In cases where
zone-capacity does not align with segment size the last segment will start
before zone-capacity and end beyond the zone-capacity of the zone. For
such spanning segments only sectors within the zone-capacity are used.
During writes and GC manage the usable segments in a section and usable
blocks per segment. Segments which are beyond zone-capacity are never
allocated, and do not need to be garbage collected, only the segments
which are before zone-capacity needs to garbage collected.
For spanning segments based on the number of usable blocks in that
segment, write to blocks only up to zone-capacity.
Zone-capacity is device specific and cannot be configured by the user.
Since NVMe ZNS device zones are sequentially write only, a block device
with conventional zones or any normal block device is needed along with
the ZNS device for the metadata operations of F2fs.
A typical nvme-cli output of a zoned device shows zone start and capacity
and write pointer as below:
SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones
are in EMPTY state. For each zone, only zone start + 49MB is usable area,
any lba/sector after 49MB cannot be read or written to, the drive will fail
any attempts to read/write. So, the second zone starts at 64MB and is
usable till 113MB (64 + 49) and the range between 113 and 128MB is
again unusable. The next zone starts at 128MB, and so on.
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
lpass_core_sc7180_probe() misses to call pm_clk_destroy() and
pm_runtime_disable() in error paths. Correct goto target to fix it.
This issue is found by code inspection.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20200827141629.101802-1-jingxiangfeng@huawei.com
Fixes: edab812d80 ("clk: qcom: lpass: Add support for LPASS clock controller for SC7180")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The DT binding for SP804 requires to have an "arm,primecell" compatible
string.
Add this string so that the Linux primecell bus driver picks the device
up and activates the clock.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
[florian: added compatible to ccbtimer1]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The SP805 binding sets the name for the actual watchdog clock to
"wdog_clk" (with an underscore).
Change the name in the DTs for the Broadcom NSP platform to match that.
The Linux and U-Boot driver use the *first* clock for this purpose
anyway, so it does not break anything.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The SP805 DT binding requires two clocks to be specified, but the
Broadcom Cygnus DT currently only specifies one clock.
In practice, Linux would pick a clock named "apb_pclk" for the bus
clock, and the Linux and U-Boot SP805 driver would use the first clock
to derive the actual watchdog counter frequency.
Since currently both are the very same clock, we can just double the
clock reference, and add the correct clock-names, to match the binding.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
add support for the Cisco Meraki MR32.
This is a dual-band enterprise class 802.11ac access point.
The unit was donated by Chris Blake. Thank you!
SoC: Broadcom BCM53016A1 (1 GHz, 2 cores)
RAM: 128 MiB
NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable)
ETH: 1GBit Ethernet Port - PoE
WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352)
WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352)
WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428)
BLE: Broadcom BCM20732 (ttyS1)
LEDS: 1 x Programmable RGB Status LED (driven by a PWM)
1 x White LED (GPIO)
1 x Orange LED Fault Indicator (GPIO)
2 x LAN Activity / Speed LEDs (On the RJ45 Port)
BUTTON: one Reset button
MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC)
ina219 hardware monitor (i2c)
Kensington Lock
SERIAL:
WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
The Serial setting is 115200-8-N-1. The board has a populated
right angle 1x4 0.1" pinheader.
The pinout is: VCC, RX, TX, GND.
Odd stuff:
- uart0 clock frequency is 62.5 MHz.
- The LEDs are labeled as SYS-LED1 through SYS-LED3
because of the silkscreen on the PCB.
- the original u-boot has been compiled with most functions
and commands disabled. The u-boot env isn't setup properly
either and as a result, the bcm47xxpart probing is not
working. Hence, the nand partitions are specified through a
"fixed-partition" binding.
- The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is
connected to uart2 of the SoC. The BCM20732 does not
provide a HCI. So the linux' bluetooth stack is useless.
The mock-up node with the compatible binding and
enable-gpios property is provided solely as documentation.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Wait until the QDIO data connection is severed. Otherwise the device
might still be processing the buffers, and end up accessing skb data
that we already freed.
Fixes: 8b5026bc16 ("s390/qeth: fix qdio teardown after early init error")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the weird space inside the NETIF_F_CSUM_MASK.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), we use blackhole_netdev to invalidate dst entries
instead of loopback device anymore.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The delay was intended to be configured to "simulate" a high(er) BDP
link. As such, it needs to be set as part of the loss-configuration and
not as part of the netem reordering configuration.
The reordering-config also requires a delay but that delay is the
reordering-extend. So, a good approach is to set the reordering-extend
as a function of the configured latency. E.g., 25% of the overall
latency.
To speed up the selftests, we limit the delay to 50ms maximum to avoid
having the selftests run for too long.
Finally, the intention of tc_reorder was that when it is unset, the test
picks a random configuration. However, currently it is always initialized
and thus the random config won't be picked up.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/6
Reported-and-reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang says:
====================
tcp: add tos reflection feature
This patch series adds a new tcp feature to reflect TOS value received in
SYN, and send it out in SYN-ACK, and eventually set the TOS value of the
established socket with this reflected TOS value. This provides a way to
set the traffic class/QoS level for all traffic in the same connection
to be the same as the incoming SYN. It could be useful for datacenters
to provide equivalent QoS according to the incoming request.
This feature is guarded by /proc/sys/net/ipv4/tcp_reflect_tos, and is by
default turned off.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds a new TCP feature to reflect the tos value received in
SYN, and send it out on the SYN-ACK, and eventually set the tos value of
the established socket with this reflected tos value. This provides a
way to set the traffic class/QoS level for all traffic in the same
connection to be the same as the incoming SYN request. It could be
useful in data centers to provide equivalent QoS according to the
incoming request.
This feature is guarded by /proc/sys/net/ipv4/tcp_reflect_tos, and is by
default turned off.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds tos as a new passed in parameter to
ip_build_and_send_pkt() which will be used in the later commit.
This is a pure restructure and does not have any functional change.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A new field is added to the request sock to record the TOS value
received on the listening socket during 3WHS:
When not under syn flood, it is recording the TOS value sent in SYN.
When under syn flood, it is recording the TOS value sent in the ACK.
This is a preparation patch in order to do TOS reflection in the later
commit.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces some bug fixes including 1) SMR drive fix, 2) infinite loop
when building free node ids, 3) EOF at DIO read.
-----BEGIN PGP SIGNATURE-----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=gbal
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"Small bug fixes for:
- SMR drive fix
- infinite loop when building free node ids
- EOF at DIO read"
* tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: Return EOF on unaligned end of file DIO read
f2fs: fix indefinite loop scanning for free nid
f2fs: Fix type of section block count variables
Remove mvneta_stats from mvneta_swbm_rx_frame signature since now stats
are accounted in mvneta_run_xdp routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
netpoll: make sure napi_list is safe for RCU traversal
This series is a follow-up to the fix in commit 96e97bc07e ("net:
disable netpoll on fresh napis"). To avoid any latent race conditions
convert dev->napi_list to a proper RCU list. We need minor restructuring
because it looks like netif_napi_del() used to be idempotent, and
it may be quite hard to track down everyone who depends on that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netpoll needs to traverse dev->napi_list under RCU, make
sure it uses the right iterator and that removal from this
list is handled safely.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To RCUify napi->dev_list we need to replace list_del_init()
with list_del_rcu(). There is no _init() version for RCU for
obvious reasons. Up until now netif_napi_del() was idempotent
so to make sure it remains such add a bit which is set when
NAPI is listed, and cleared when it removed. Since we don't
expect multiple calls to netif_napi_add() to be correct,
add a warning on that side.
Now that napi_hash_add / napi_hash_del are only called by
napi_add / del we can actually steal its bit. We just need
to make sure hash node is initialized correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We allow drivers to call napi_hash_del() before calling
netif_napi_del() to batch RCU grace periods. This makes
the API asymmetric and leaks internal implementation details.
Soon we will want the grace period to protect more than just
the NAPI hash table.
Restructure the API and have drivers call a new function -
__netif_napi_del() if they want to take care of RCU waits.
Note that only core was checking the return status from
napi_hash_del() so the new helper does not report if the
NAPI was actually deleted.
Some notes on driver oddness:
- veth observed the grace period before calling netif_napi_del()
but that should not matter
- myri10ge observed normal RCU flavor
- bnx2x and enic did not actually observe the grace period
(unless they did so implicitly)
- virtio_net and enic only unhashed Rx NAPIs
The last two points seem to indicate that the calls to
napi_hash_del() were a left over rather than an optimization.
Regardless, it's easy enough to correct them.
This patch may introduce extra synchronize_net() calls for
interfaces which set NAPI_STATE_NO_BUSY_POLL and depend on
free_netdev() to call netif_napi_del(). This seems inevitable
since we want to use RCU for netpoll dev->napi_list traversal,
and almost no drivers set IFF_DISABLE_NETPOLL.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a couple bugs here:
1) If opt[1] is zero then this results in a forever loop. If the value
is less than 2 then it is invalid.
2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can
result in memory corruption.
In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead
of "len" because, if "opt[1]" is less than sizeof(valid_accm) then
"nak_len" gets out of sync and it can lead to memory corruption in the
next iterations through the loop. In case of LCP_OPTION_MAGIC, the
only valid value for opt[1] is 6, but the code is trying to log invalid
data so we should only discard the data when "len" is less than 6
because that leads to a read overflow.
Reported-by: ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com>
Fixes: e022c2f07a ("WAN: new synchronous PPP implementation for generic HDLC.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the micrel phy driver calls phy_init_hw() as a workaround,
the commit 9886a4dbd2 ("net: phy: call phy_disable_interrupts()
in phy_init_hw()") disables the interrupt unexpectedly. So,
call phy_disable_interrupts() in phy_attach_direct() instead.
Otherwise, the phy cannot link up after the ethernet cable was
disconnected.
Note that other drivers (like at803x.c) also calls phy_init_hw().
So, perhaps, the driver caused a similar issue too.
Fixes: 9886a4dbd2 ("net: phy: call phy_disable_interrupts() in phy_init_hw()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous change "hv_netvsc: Switch the data path at the right time
during hibernation" adds the call of netvsc_vf_changed() upon
NETDEV_CHANGE, so it's necessary to avoid the duplicate call and message
when the VF is brought UP or DOWN.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When netvsc_resume() is called, the mlx5 VF NIC has not been resumed yet,
so in the future the host might sliently fail the call netvsc_vf_changed()
-> netvsc_switch_datapath() there, even if the call works now.
Call netvsc_vf_changed() in the NETDEV_CHANGE event handler: at that time
the mlx5 VF NIC has been resumed.
Fixes: 19162fd406 ("hv_netvsc: Fix hibernation for mlx5 VF driver")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure the machine supports RDRAND, otherwise there is no trusted
source of randomness in the system.
To also check this in the pre-decompression stage, make has_cpuflag()
not depend on CONFIG_RANDOMIZE_BASE anymore.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-73-joro@8bytes.org
Jakub Kicinski says:
====================
mlx4: avoid devlink port type not set warnings
This small set addresses the issue of mlx4 potentially not setting
devlink port type when Ethernet or IB driver is not built, but
port has that type.
v2:
- add patch 1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Even tho mlx4_core registers the devlink ports, it's mlx4_en
and mlx4_ib which set their type. In situations where one of
the two is not built yet the machine has ports of given type
we see the devlink warning from devlink_port_type_warn() trigger.
Having ports of a type not supported by the kernel may seem
surprising, but it does occur in practice - when the unsupported
port is not plugged in to a switch anyway users are more than happy
not to see it (and potentially allocate any resources to it).
Set the type in mlx4_core if type-specific driver is not built.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following change will add support for a corner case where
we may not have a netdev to pass to devlink_port_type_eth_set()
but we still want to set port type.
This is definitely a corner case, and drivers should not normally
pass NULL netdev - print a warning message when this happens.
Sadly for other port types (ib) switches don't have a device
reference, the way we always do for Ethernet, so we can't put
the warning in __devlink_port_type_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling down to EFI runtime services can result in the firmware
performing VMGEXIT calls. The firmware is likely to use the GHCB of the
OS (e.g., for setting EFI variables), so each GHCB in the system needs
to be identity-mapped in the EFI page tables, as unencrypted, to avoid
page faults.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
[ jroedel@suse.de: Moved GHCB mapping loop to sev-es.c ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200907131613.12703-72-joro@8bytes.org
In order to easily change the rx buffer size, rely on
MVNETA_MAX_RX_BUF_SIZE instead of PAGE_SIZE in mvneta_swbm_rx_frame
routine for rx buffer split. Currently this is not an issue since we set
MVNETA_MAX_RX_BUF_SIZE to PAGE_SIZE - MVNETA_SKB_PAD but it is a good to
have to configure a different rx buffer size.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there is concurrent reset and enqueue operation for the
same lockless qdisc when there is no lock to synchronize the
q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in
qdisc_deactivate() called by dev_deactivate_queue(), which may cause
out-of-bounds access for priv->ring[] in hns3 driver if user has
requested a smaller queue num when __dev_xmit_skb() still enqueue a
skb with a larger queue_mapping after the corresponding qdisc is
reset, and call hns3_nic_net_xmit() with that skb later.
Reused the existing synchronize_net() in dev_deactivate_many() to
make sure skb with larger queue_mapping enqueued to old qdisc(which
is saved in dev_queue->qdisc_sleeping) will always be reset when
dev_reset_queue() is called.
Fixes: 6b3ba9146f ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that exercises a basic sockmap / sockhash iteration. For
now we simply count the number of elements seen. Once sockmap update
from iterators works we can extend this to perform a full copy.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200909162712.221874-4-lmb@cloudflare.com
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
property should be specified on port nodes. However, the microchip
drivers read it from the switch node.
Let the driver use the per-port property and fall back to the old
location with a warning.
Fix in-tree users.
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add bpf_iter support for sockmap / sockhash, based on the bpf_sk_storage and
hashtable implementation. sockmap and sockhash share the same iteration
context: a pointer to an arbitrary key and a pointer to a socket. Both
pointers may be NULL, and so BPF has to perform a NULL check before accessing
them. Technically it's not possible for sockhash iteration to yield a NULL
socket, but we ignore this to be able to use a single iteration point.
Iteration will visit all keys that remain unmodified during the lifetime of
the iterator. It may or may not visit newly added ones.
Switch from using rcu_dereference_raw to plain rcu_dereference, so we gain
another guard rail if CONFIG_PROVE_RCU is enabled.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200909162712.221874-3-lmb@cloudflare.com
The lookup paths for sockmap and sockhash currently include a check
that returns NULL if the socket we just found is not a full socket.
However, this check is not necessary. On insertion we ensure that
we have a full socket (caveat around sock_ops), so request sockets
are not a problem. Time-wait sockets are allocated separate from
the original socket and then fed into the hashdance. They don't
affect the sockets already stored in the sockmap.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200909162712.221874-2-lmb@cloudflare.com
This patch set the init remote_id to zero, otherwise it will be a random
number.
Then it added the missing subflow's remote_id setting code both in
__mptcp_subflow_connect and in subflow_ulp_clone.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
