In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly
and remove .data field.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200817090637.26887-6-allen.cryptic@gmail.com
The iwd daemon uses libell which sets up the skcipher operation with
two separate control messages. As the first control message is sent
without MSG_MORE, it is interpreted as an empty request.
While libell should be fixed to use MSG_MORE where appropriate, this
patch works around the bug in the kernel so that existing binaries
continue to work.
We will print a warning however.
A separate issue is that the new kernel code no longer allows the
control message to be sent twice within the same request. This
restriction is obviously incompatible with what iwd was doing (first
setting an IV and then sending the real control message). This
patch changes the kernel so that this is explicitly allowed.
Reported-by: Caleb Jorden <caljorden@hotmail.com>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Let drivers advertise support for AP-mode SAE authentication offload
with a new NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Link: https://lore.kernel.org/r/20200817073316.33402-4-stanley.hsu@cypress.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Following commit e186967865 ("mwifiex: Prevent memory corruption
handling keys") the mwifiex driver fails to authenticate with certain
networks, specifically networks with 256 bit keys, and repeatedly asks
for the password. The kernel log repeats the following lines (id and
bssid redacted):
mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid>
mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully
mwifiex_pcie 0000:01:00.0: crypto keys added
mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3
Tracking down this problem lead to the overflow check introduced by the
aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This
check fails on networks with 256 bit keys due to the current storage
size for AES keys in struct mwifiex_aes_param being only 128 bit.
To fix this issue, increase the storage size for AES keys to 256 bit.
Fixes: e186967865 ("mwifiex: Prevent memory corruption handling keys")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reported-by: Kaloyan Nikolov <konik98@gmail.com>
Tested-by: Kaloyan Nikolov <konik98@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com
Using dev_kfree_skb for tx skbs breaks AQL. This worked until now only
by accident, because a mac80211 issue breaks AQL on drivers with firmware
rate control that report the rate via ieee80211_tx_status_ext as struct
rate_info.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200812144943.91974-1-nbd@nbd.name
The implementation of embedding WTBL update inside the STA_REC update is buggy
on the MT7615 v2 firmware. This leads to connection issues after a station has
connected and disconnected again.
Switch to the v1 MCU API ops, since they have received much more testing and
should be more stable.
On MT7622 and later, the v2 API is more actively used, so we should keep using
it as well.
Fixes: 6849e29ed9 ("mt76: mt7615: add starec operating flow for firmware v2")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200812102332.11812-1-nbd@nbd.name
It should be considered an illegal operation if the ULP attempts to modify
a QP from another state to the current hardware state. Otherwise, the ULP
can modify some fields of QPC at any time. For example, for a QP in state
of RTS, modify it from RTR to RTS can change the PSN, which is always not
as expected.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/1598353674-24270-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Building lpddr2_nvm with clang can result in a giant stack usage
in one function:
drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=]
The problem is that clang decides to build a copy of the mtd_info
structure on the stack and then do a memcpy() into the actual version. It
shouldn't really do it that way, but it's not strictly a bug either.
As a workaround, use a static const version of the structure to assign
most of the members upfront and then only set the few members that
require runtime knowledge at probe time.
Fixes: 96ba9dd657 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200505140136.263461-1-arnd@arndb.de
Driver crashes when destroy_qp is re-tried because of an error
returned. This is because the qp entry was removed from the qp list during
the first call.
Remove qp from the list only if destroy_qp returns success.
The driver will still trigger a WARN_ON due to the memory leaking, but at
least it isn't corrupting memory too.
Fixes: 8dae419f9e ("RDMA/bnxt_re: Refactor queue pair creation code")
Link: https://lore.kernel.org/r/1598292876-26529-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When computing the first psn entry, driver checks for page alignment. If
this address is not page aligned,it attempts to compute the offset in that
page for later use by using ALIGN macro. ALIGN macro does not return
offset bytes but the requested aligned address and hence cannot be used
directly to store as offset. Since driver was using the address itself
instead of offset, it resulted in invalid address when filling the psn
buffer.
Fixed driver to use PAGE_MASK macro to calculate the offset.
Fixes: fddcbbb02a ("RDMA/bnxt_re: Simplify obtaining queue entry from hw ring")
Link: https://lore.kernel.org/r/1598292876-26529-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some adapters report more than 256 gid entries. Restrict it to 256 for
now.
Fixes: 1ac5a4047975("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1598292876-26529-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
At first, driver allocates memory for NQ based on qplib_ctx->cq_count and
qplib_ctx->srqc_count. Later when creating ring, it uses a static value
of 128K -1.
Fixing this with a static value for now.
Fixes: b08fe048a6 ("RDMA/bnxt_re: Refactor net ring allocation function")
Link: https://lore.kernel.org/r/1598292876-26529-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qp->id can be a value outside the max number of qp. Indexing the qp table
with the id can cause out of bounds crash. So changing the qp table
indexing by (qp->id % max_qp -1).
Allocating one extra entry for QP1. Some adapters create one more than the
max_qp requested to accommodate QP1. If the qp->id is 1, store the
inforamtion in the last entry of the qp table.
Fixes: f218d67ef0 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Link: https://lore.kernel.org/r/1598292876-26529-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
QP1 Rx CQE reports transparent VLAN ID in the completion and this is used
while reporting the completion for received MAD packet. Check if the vlan
id is configured before reporting it in the work completion.
Fixes: 84511455ac ("RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion")
Link: https://lore.kernel.org/r/1598292876-26529-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the pkey_table is not available (which is the case when RoCE is not
supported), the cited commit caused a regression where mlx4_devices
without RoCE are not created.
Fix this by returning a pkey table length of zero in procedure
eth_link_query_port() if the pkey-table length reported by the device is
zero.
Link: https://lore.kernel.org/r/20200824110229.1094376-1-leon@kernel.org
Cc: <stable@vger.kernel.org>
Fixes: 1901b91f99 ("IB/core: Fix potential NULL pointer dereference in pkey cache")
Fixes: fa417f7b52 ("IB/mlx4: Add support for IBoE")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In physmap_flash_of_init() the maps[].name can be populated based on the
optional 'linux,mtd-name' property in the dts. Make sure this is
retained when filling in the rest of the map[] data.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200824025744.25992-1-chris.packham@alliedtelesis.co.nz
The error message for inode transid is the same as for inode generation,
which makes us unable to detect the real problem.
Reported-by: Tyler Richmond <t.d.richmond@gmail.com>
Fixes: 496245cac5 ("btrfs: tree-checker: Verify inode item")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/b43/phy_n.c: In function ‘b43_nphy_workarounds_rev3plus’:
drivers/net/wireless/broadcom/b43/phy_n.c:3346:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
drivers/net/wireless/broadcom/b43/phy_n.c: In function ‘b43_nphy_spur_workaround’:
drivers/net/wireless/broadcom/b43/phy_n.c:4608:4: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
drivers/net/wireless/broadcom/b43/phy_n.c:4641:4: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
drivers/net/wireless/broadcom/b43/phy_n.c: In function ‘b43_phy_initn’:
drivers/net/wireless/broadcom/b43/phy_n.c:6170:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
drivers/net/wireless/broadcom/b43/phy_n.c:6215:5: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: Michael Buesch <m@bues.ch>
Cc: linux-wireless@vger.kernel.org
Cc: b43-dev@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-31-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/b43/phy_common.c:467: warning: Function parameter or member 'work' not described in 'b43_phy_txpower_adjust_work'
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: Martin Langer <martin-langer@gmx.de>
Cc: Stefano Brivio <stefano.brivio@polimi.it>
Cc: Michael Buesch <m@bues.ch>
Cc: van Dyk <kugelfang@gentoo.org>
Cc: Andreas Jaggi <andreas.jaggi@waterwave.ch>
Cc: linux-wireless@vger.kernel.org
Cc: b43-dev@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-27-lee.jones@linaro.org
Lots of these are either completely wrong or do not even attempt to
document any of the parameters. Others use an incorrect/dated format
which is not recognised by the kernel (... and are also wrong and
suffering from docrot).
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3011: warning: Function parameter or member 'priv' not described in 'ipw_alive'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3693: warning: Incorrect use of kernel-doc format: * Driver allocates buffers of this size for Rx
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3697: warning: Incorrect use of kernel-doc format: * ipw_rx_queue_space - Return number of free slots available in queue.
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3700: warning: Function parameter or member 'q' not described in 'ipw_rx_queue_space'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3743: warning: Function parameter or member 'priv' not described in 'ipw_queue_init'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3743: warning: Function parameter or member 'q' not described in 'ipw_queue_init'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3743: warning: Function parameter or member 'count' not described in 'ipw_queue_init'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3743: warning: Function parameter or member 'read' not described in 'ipw_queue_init'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3743: warning: Function parameter or member 'write' not described in 'ipw_queue_init'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3743: warning: Function parameter or member 'base' not described in 'ipw_queue_init'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3743: warning: Function parameter or member 'size' not described in 'ipw_queue_init'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3800: warning: Function parameter or member 'priv' not described in 'ipw_queue_tx_free_tfd'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3800: warning: Function parameter or member 'txq' not described in 'ipw_queue_tx_free_tfd'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3841: warning: Function parameter or member 'priv' not described in 'ipw_queue_tx_free'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3841: warning: Function parameter or member 'txq' not described in 'ipw_queue_tx_free'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:3869: warning: Function parameter or member 'priv' not described in 'ipw_tx_queue_free'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:4474: warning: Function parameter or member 'priv' not described in 'ipw_rx_notification'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:4474: warning: Function parameter or member 'notif' not described in 'ipw_rx_notification'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:4935: warning: Function parameter or member 'priv' not described in 'ipw_queue_reset'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:5008: warning: Function parameter or member 'priv' not described in 'ipw_queue_tx_reclaim'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:5008: warning: Function parameter or member 'txq' not described in 'ipw_queue_tx_reclaim'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:5008: warning: Function parameter or member 'qindex' not described in 'ipw_queue_tx_reclaim'
drivers/net/wireless/intel/ipw2x00/ipw2200.c:8456: warning: Function parameter or member 'priv' not described in 'ipw_sw_reset'
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Gerald Combs <gerald@ethereal.com>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-26-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
In file included from drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c:30:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c:288: warning: Function parameter or member 'wl' not described in 'brcms_free'
drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c:1127: warning: Function parameter or member 'pdev' not described in 'brcms_attach'
drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c:1222: warning: Function parameter or member 'pdev' not described in 'brcms_bcma_probe'
drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c:1301: warning: Function parameter or member 'work' not described in 'brcms_driver_init'
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-25-lee.jones@linaro.org
Also demote a commit block header which is clearly not suitable for kerneldoc.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c: In function ‘brcmf_fweh_handle_if_event’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:131:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:36: warning: Function parameter or member 'datalen' not described in 'brcmf_fweh_queue_item'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:44: warning: Function parameter or member 'code' not described in 'brcmf_fweh_event_name'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:44: warning: Function parameter or member 'name' not described in 'brcmf_fweh_event_name'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:127: warning: Function parameter or member 'emsg' not described in 'brcmf_fweh_handle_if_event'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:127: warning: Function parameter or member 'data' not described in 'brcmf_fweh_handle_if_event'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:127: warning: Excess function parameter 'item' description in 'brcmf_fweh_handle_if_event'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:127: warning: Excess function parameter 'ifpp' description in 'brcmf_fweh_handle_if_event'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:391: warning: Function parameter or member 'packet_len' not described in 'brcmf_fweh_process_event'
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-24-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c: In function ‘brcmf_fweh_handle_if_event’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:131:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-23-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/b43legacy/main.c: In function ‘b43legacy_interrupt_tasklet’:
drivers/net/wireless/broadcom/b43legacy/main.c:1344:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Martin Langer <martin-langer@gmx.de>
Cc: Stefano Brivio <stefano.brivio@polimi.it>
Cc: Michael Buesch <m@bues.ch>
Cc: van Dyk <kugelfang@gentoo.org>
Cc: Andreas Jaggi <andreas.jaggi@waterwave.ch>
Cc: linux-wireless@vger.kernel.org
Cc: b43-dev@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-18-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ‘ipw_irq_tasklet’:
drivers/net/wireless/intel/ipw2x00/ipw2200.c:1953:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ‘ipw_rx’:
drivers/net/wireless/intel/ipw2x00/ipw2200.c:8251:9: warning: variable ‘w’ set but not used [-Wunused-but-set-variable]
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Gerald Combs <gerald@ethereal.com>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-17-lee.jones@linaro.org
Almost all of the headers in this file fail to reach the standards
required by kernel-doc and no "kernel-doc::" references are made to it
from the kernel's Documentation.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlegacy/common.c: In function ‘il_enqueue_hcmd’:
drivers/net/wireless/intel/iwlegacy/common.c:3126:6: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/intel/iwlegacy/common.c:697: warning: Function parameter or member 'il' not described in 'il_eeprom_init'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'il' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'band' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'channel' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'eeprom_ch' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'clear_ht40_extension_channel' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:885: warning: Function parameter or member 'il' not described in 'il_init_channel_map'
drivers/net/wireless/intel/iwlegacy/common.c:1035: warning: Function parameter or member 'il' not described in 'il_get_channel_info'
drivers/net/wireless/intel/iwlegacy/common.c:1035: warning: Function parameter or member 'band' not described in 'il_get_channel_info'
drivers/net/wireless/intel/iwlegacy/common.c:1035: warning: Function parameter or member 'channel' not described in 'il_get_channel_info'
drivers/net/wireless/intel/iwlegacy/common.c:1351: warning: Function parameter or member 'il' not described in 'il_scan_cancel'
drivers/net/wireless/intel/iwlegacy/common.c:1365: warning: Function parameter or member 'il' not described in 'il_scan_cancel_timeout'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'il' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'frame' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'ta' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'ies' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'ie_len' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'left' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1924: warning: Function parameter or member 'il' not described in 'il_prep_station'
drivers/net/wireless/intel/iwlegacy/common.c:1924: warning: Function parameter or member 'addr' not described in 'il_prep_station'
drivers/net/wireless/intel/iwlegacy/common.c:1924: warning: Function parameter or member 'is_ap' not described in 'il_prep_station'
drivers/net/wireless/intel/iwlegacy/common.c:1924: warning: Function parameter or member 'sta' not described in 'il_prep_station'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'il' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'addr' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'is_ap' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'sta' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'sta_id_r' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2070: warning: Function parameter or member 'il' not described in 'il_sta_ucode_deactivate'
drivers/net/wireless/intel/iwlegacy/common.c:2070: warning: Function parameter or member 'sta_id' not described in 'il_sta_ucode_deactivate'
drivers/net/wireless/intel/iwlegacy/common.c:2144: warning: Function parameter or member 'il' not described in 'il_remove_station'
drivers/net/wireless/intel/iwlegacy/common.c:2144: warning: Function parameter or member 'sta_id' not described in 'il_remove_station'
drivers/net/wireless/intel/iwlegacy/common.c:2144: warning: Function parameter or member 'addr' not described in 'il_remove_station'
drivers/net/wireless/intel/iwlegacy/common.c:2205: warning: Function parameter or member 'il' not described in 'il_clear_ucode_stations'
drivers/net/wireless/intel/iwlegacy/common.c:2237: warning: Function parameter or member 'il' not described in 'il_restore_stations'
drivers/net/wireless/intel/iwlegacy/common.c:2372: warning: Function parameter or member 'il' not described in 'il_is_lq_table_valid'
drivers/net/wireless/intel/iwlegacy/common.c:2372: warning: Function parameter or member 'lq' not described in 'il_is_lq_table_valid'
drivers/net/wireless/intel/iwlegacy/common.c:2401: warning: Function parameter or member 'il' not described in 'il_send_lq_cmd'
drivers/net/wireless/intel/iwlegacy/common.c:2401: warning: Function parameter or member 'lq' not described in 'il_send_lq_cmd'
drivers/net/wireless/intel/iwlegacy/common.c:2401: warning: Function parameter or member 'flags' not described in 'il_send_lq_cmd'
drivers/net/wireless/intel/iwlegacy/common.c:2539: warning: Function parameter or member 'q' not described in 'il_rx_queue_space'
drivers/net/wireless/intel/iwlegacy/common.c:2556: warning: Function parameter or member 'il' not described in 'il_rx_queue_update_write_ptr'
drivers/net/wireless/intel/iwlegacy/common.c:2556: warning: Function parameter or member 'q' not described in 'il_rx_queue_update_write_ptr'
drivers/net/wireless/intel/iwlegacy/common.c:2711: warning: Function parameter or member 'il' not described in 'il_txq_update_write_ptr'
drivers/net/wireless/intel/iwlegacy/common.c:2711: warning: Function parameter or member 'txq' not described in 'il_txq_update_write_ptr'
drivers/net/wireless/intel/iwlegacy/common.c:2751: warning: Function parameter or member 'il' not described in 'il_tx_queue_unmap'
drivers/net/wireless/intel/iwlegacy/common.c:2751: warning: Function parameter or member 'txq_id' not described in 'il_tx_queue_unmap'
drivers/net/wireless/intel/iwlegacy/common.c:2775: warning: Function parameter or member 'il' not described in 'il_tx_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2775: warning: Function parameter or member 'txq_id' not described in 'il_tx_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2775: warning: Excess function parameter 'txq' description in 'il_tx_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2813: warning: Function parameter or member 'il' not described in 'il_cmd_queue_unmap'
drivers/net/wireless/intel/iwlegacy/common.c:2856: warning: Function parameter or member 'il' not described in 'il_cmd_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2856: warning: Excess function parameter 'txq' description in 'il_cmd_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2932: warning: Function parameter or member 'il' not described in 'il_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:2932: warning: Function parameter or member 'q' not described in 'il_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:2932: warning: Function parameter or member 'slots' not described in 'il_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:2932: warning: Function parameter or member 'id' not described in 'il_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:2966: warning: Function parameter or member 'il' not described in 'il_tx_queue_alloc'
drivers/net/wireless/intel/iwlegacy/common.c:2966: warning: Function parameter or member 'txq' not described in 'il_tx_queue_alloc'
drivers/net/wireless/intel/iwlegacy/common.c:2966: warning: Function parameter or member 'id' not described in 'il_tx_queue_alloc'
drivers/net/wireless/intel/iwlegacy/common.c:3006: warning: Function parameter or member 'il' not described in 'il_tx_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:3006: warning: Function parameter or member 'txq_id' not described in 'il_tx_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:3245: warning: Function parameter or member 'il' not described in 'il_hcmd_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/common.c:3245: warning: Function parameter or member 'txq_id' not described in 'il_hcmd_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/common.c:3245: warning: Function parameter or member 'idx' not described in 'il_hcmd_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/common.c:3245: warning: Function parameter or member 'cmd_idx' not described in 'il_hcmd_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/common.c:3279: warning: Function parameter or member 'il' not described in 'il_tx_cmd_complete'
drivers/net/wireless/intel/iwlegacy/common.c:3425: warning: Function parameter or member 'il' not described in 'il_init_geos'
drivers/net/wireless/intel/iwlegacy/common.c:3949: warning: bad line:
drivers/net/wireless/intel/iwlegacy/common.c:3955: warning: Function parameter or member 'il' not described in 'il_set_rxon_channel'
drivers/net/wireless/intel/iwlegacy/common.c:4154: warning: Function parameter or member 'il' not described in 'il_irq_handle_error'
drivers/net/wireless/intel/iwlegacy/common.c:5019: warning: Function parameter or member 'hw' not described in 'il_mac_config'
drivers/net/wireless/intel/iwlegacy/common.c:5019: warning: Function parameter or member 'changed' not described in 'il_mac_config'
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-16-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlegacy/common.c: In function ‘il_enqueue_hcmd’:
drivers/net/wireless/intel/iwlegacy/common.c:3126:6: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-15-lee.jones@linaro.org
- Ensure spaces appear after {for, if, while, etc}
- Ensure spaces to not appear after '('
- Ensure spaces to not appear before ')'
- Ensure spaces appear between ')' and '{'
- Ensure spaces appear after ','
- Ensure spaces do not appear before ','
- Ensure spaces appear either side of '='
- Ensure '{'s which open functions are on a new line
- Remove trailing whitespace
There are still a whole host of issues with this file, but this
patch certainly breaks the back of them.
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Benjamin Reed <breed@users.sourceforge.net>
Cc: Javier Achirica <achirica@users.sourceforge.net>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Fabrice Bellet <fabrice@bellet.info>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-13-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/cisco/airo.c: In function ‘airo_init_module’:
drivers/net/wireless/cisco/airo.c:5663:21: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Benjamin Reed <breed@users.sourceforge.net>
Cc: Javier Achirica <achirica@users.sourceforge.net>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Fabrice Bellet <fabrice@bellet.info>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-12-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/b43/main.c: In function ‘b43_dummy_transmission’:
drivers/net/wireless/broadcom/b43/main.c:785:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
drivers/net/wireless/broadcom/b43/main.c: In function ‘b43_do_interrupt_thread’:
drivers/net/wireless/broadcom/b43/main.c:2017:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Martin Langer <martin-langer@gmx.de>
Cc: Stefano Brivio <stefano.brivio@polimi.it>
Cc: Michael Buesch <m@bues.ch>
Cc: van Dyk <kugelfang@gentoo.org>
Cc: Andreas Jaggi <andreas.jaggi@waterwave.ch>
Cc: Albert Herranz <albert_herranz@yahoo.es>
Cc: linux-wireless@vger.kernel.org
Cc: b43-dev@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-8-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/atmel/atmel.c:4232: warning: Cannot understand This file is part of net.russotto.AtmelMACFW, hereto referred to
Cc: Simon Kelley <simon@thekelleys.org.uk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-6-lee.jones@linaro.org
Function print_drs_error is only used in drivers/mtd/lpddr/lpddr_cmds.c
so, better to move it there.
Also, notice that there's no need for inline as the function is used
once. Lastly, fix the following checkpatch warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+static void print_drs_error(unsigned dsr)
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/e0063cbd65f3b47be1db34efc494ea3047634d88.1588016644.git.gustavo@embeddedor.com
pr_notice is preferred over printk.
Also, coalesce formats as coalescing is part of coding-style:
"never break user-visible strings such as printk messages"
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/ff48ce07ef208ba65b858f09279a3b36031d64d2.1588016644.git.gustavo@embeddedor.com
Update logic for broken test. Use a more common logging style.
It appears the logic in this function is broken for the
consecutive tests of
if (prog_status & 0x3)
...
else if (prog_status & 0x2)
...
else (prog_status & 0x1)
...
Likely the first test should be
if ((prog_status & 0x3) == 0x3)
Found by inspection of include files using printk.
Fixes: eb3db27507 ("[MTD] LPDDR PFOW definition")
Cc: stable@vger.kernel.org
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/3fb0e29f5b601db8be2938a01d974b00c8788501.1588016644.git.gustavo@embeddedor.com
These are special extent buffers that get rewound in order to lookup
the state of the tree at a specific point in time. As such they do not
go through the normal initialization paths that set their lockdep class,
so handle them appropriately when they are created and before they are
locked.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We want to reuse the functions and structs for other counters such as BSS
color change. Rename them to more generic names.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200811080107.3615705-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We want to reuse the attributes for other counters such as BSS color
change. Rename them to more generic names.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200811080107.3615705-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch adds the nl80211 structs, definitions, policies and parsing
code required to pass fixed HE rate, GI and LTF settings.
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20200804081630.2013619-1-john@phrozen.org
[fix comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
