All callers of these primitives will
* discard anything we might've copied in case of error
* ignore the csum value in case of error
* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.
That suggest the following calling conventions:
* don't pass err_ptr - just return 0 on error.
* don't bother with zeroing destination, etc. in case of error
* don't pass the initial sum - just use 0xffffffff.
This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.
A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them. Not sure if it's worth
a separate commit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Preparation for the change of calling conventions; right now all
callers pass 0 as initial sum. Passing 0xffffffff instead yields
the values comparable mod 0xffff and guarantees that 0 will not
be returned on success.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
quite a few architectures have the same csum_partial_copy_nocheck() -
simply memcpy() the data and then return the csum of the copy.
hexagon, parisc, ia64, s390, um: explicitly spelled out that way.
arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32,
nios2, openrisc, riscv, unicore32: end up picking the same thing spelled
out in lib/checksum.h (with varying amounts of perversions along the way).
everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc,
sh, sparc, x86, xtensa) have non-generic variants. For all except c6x
the declaration is in their asm/checksum.h. c6x uses the wrapper
from asm-generic/checksum.h that would normally lead to the lib/checksum.h
instance, but in case of c6x we end up using an asm function from arch/c6x
instead.
Screw that mess - have architectures with private instances define
_HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default
one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY
*not* defined.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
do csum_partial_copy_nocheck() on the first fragment, then
add the rest to it. Equivalent transformation.
That was the only caller of csum_partial_copy_nocheck() that
might pass it non-zero as the last argument.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently drvdata->clks is not being checked for an allocation failure,
leading to potential null pointer dereferencing. Fix this by adding a
check and returning -ENOMEM if an error occurred.
Fixes: 1220f6a76e ("ASoC: qcom: Add common array to initialize soc based core clocks")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rohit kumar <rohitkr@codeaurora.org>
Addresses-Coverity: ("Dereference null return value")
Link: https://lore.kernel.org/r/20200819160103.164893-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
__smc_diag_dump() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 4-byte hole near the
beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo`
with memset().
Fixes: 4b1b7d3b30 ("net/smc: add SMC-D diag support")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable VERSION is expanded for every use of CFLAGS. This causes
"git describe" to get called multiple times on the kernel tree, which
can be quite slow.
The git revision does not change during build, so we can use simple
variable expansion to set VERSION.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
IPv6 filters can occupy up to 4 slots and will exhaust HPFILTER
region much sooner. So, continue searching for free slots in the
HASH or NORMAL filter regions, as long as the rule's priority does
not conflict with existing rules in those regions.
Signed-off-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Truncation of DMA_BIT_MASK to 32-bit dma_addr_t is semantically safe,
but the compiler was warning because it was happening implicitly.
Insert explicit casts to suppress the warnings.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
s3c24xx and s3c64xx have a lot in common, but are split across three
separate directories, which makes the interaction of the header files
more complicated than necessary.
Move all three directories into a new mach-s3c, with a minimal
set of changes to each file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[krzk: Rebase, add s3c24xx and s3c64xx suffix to several files, add SPDX
headers to new files, remove plat-samsung from MAINTAINERS]
Co-developed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
https://lore.kernel.org/r/20200806182059.2431-39-krzk@kernel.org
In brcmstb_dpfe_download_firmware(), memory is allocated to variable fw by
firmware_request_nowarn(), but never released. Fix up to release fw on
all return paths.
Cc: <stable@vger.kernel.org>
Fixes: 2f330caff5 ("memory: brcmstb: Add driver for DPFE")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200820172118.781324-1-alex.dewar90@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
exceptions may be traversed using list_for_each_entry_rcu()
outside of an RCU read side critical section BUT under the
protection of decgroup_mutex. Hence add the corresponding
lockdep expression to fix the following false-positive
warning:
[ 2.304417] =============================
[ 2.304418] WARNING: suspicious RCU usage
[ 2.304420] 5.5.4-stable #17 Tainted: G E
[ 2.304422] -----------------------------
[ 2.304424] security/device_cgroup.c:355 RCU-list traversed in non-reader section!!
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: James Morris <jmorris@namei.org>
There are a couple of spelling mistakes in comment text. Fix these.
Signed-off-by: Kaige Li <likaige@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds SiFive drivers to rv32_defconfig, to keep in sync with the
64-bit config. This is useful when testing 32-bit kernel with QEMU
'sifive_u' 32-bit machine.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
counter register for clocksource and CLINT MMIO compare register
for clockevent device.
We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We add mechanism to set custom IPI operations so that CLINT driver
from drivers directory can provide custom IPI operations.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
- fix out more fallout from the dma-pool changes
(Nicolas Saenz Julienne, me)
-----BEGIN PGP SIGNATURE-----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=RQ4K
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne,
me)"
* tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: Only allocate from CMA when in same memory zone
dma-pool: fix coherent pool allocations for IOMMU mappings
Commit 231609785c ("dax: print error message by pr_info()
in __generic_fsdax_supported()") happens to print the following
error message during booting when the non-persistent memory block
devices are configured by device mapper. Those error messages are
caused by the variable 'dax_dev' is NULL. Users might be confused
with those error messages since they do not use the persistent
memory device. Moreover, users might scare about "what's wrong
with my disks" because they see the 'error' and 'failed' keywords.
# dmesg | grep fail
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdk3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
sdb3: error: dax access failed (-95)
# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 1.1T 0 disk
├─sda1 8:1 0 156M 0 part
├─sda2 8:2 0 40G 0 part
└─sda3 8:3 0 1.1T 0 part
sdb 8:16 0 1.1T 0 disk
├─sdb1 8:17 0 600M 0 part
├─sdb2 8:18 0 1G 0 part
└─sdb3 8:19 0 1.1T 0 part
├─rhel00-swap 254:3 0 4G 0 lvm
├─rhel00-home 254:4 0 1T 0 lvm
└─rhel00-root 254:5 0 50G 0 lvm
sdc 8:32 0 1.1T 0 disk
sdd 8:48 0 1.1T 0 disk
sde 8:64 0 1.1T 0 disk
sdf 8:80 0 1.1T 0 disk
sdg 8:96 0 1.1T 0 disk
sdh 8:112 0 3.3T 0 disk
├─sdh1 8:113 0 500M 0 part /boot/efi
├─sdh2 8:114 0 40G 0 part /
├─sdh3 8:115 0 2.9T 0 part /home
└─sdh4 8:116 0 314.6G 0 part [SWAP]
sdi 8:128 0 1.1T 0 disk
sdj 8:144 0 3.3T 0 disk
├─sdj1 8:145 0 512M 0 part
└─sdj2 8:146 0 3.3T 0 part
sdk 8:160 0 119.2G 0 disk
├─sdk1 8:161 0 200M 0 part
├─sdk2 8:162 0 1G 0 part
└─sdk3 8:163 0 118G 0 part
├─rhel-swap 254:0 0 4G 0 lvm
├─rhel-home 254:1 0 64G 0 lvm
└─rhel-root 254:2 0 50G 0 lvm
sdl 8:176 0 119.2G 0 disk
The call path is shown as follows:
dm_table_determine_type
dm_table_supports_dax
device_supports_dax
generic_fsdax_supported
__generic_fsdax_supported
With the disk configuration listing from the command 'lsblk',
the member 'dev->dax_dev' of the block devices 'sdb3' and 'sdk3'
(configured by device mapper) is NULL in function
generic_fsdax_supported() because the member is configured in
function open_table_device().
To prevent the confusing error messages in this scenario (this is
normal behavior), just print those error messages by pr_debug()
by checking if dax_dev is NULL and the block device does not support
DAX.
Link: https://lore.kernel.org/r/20200819154236.24191-1-adrianhuang0701@gmail.com
Fixes: 231609785c ("dax: print error message by pr_info() in __generic_fsdax_supported()")
Cc: Coly Li <colyli@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
The afs_put_operation() function needs to put the reference to the key
that's authenticating the operation.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The error handling in the VL server rotation in the case of there being no
contactable servers is not correct. In such a case, the records of all the
servers in the list are scanned and the errors and abort codes are mapped
and prioritised and one error is chosen. This is then forgotten and the
default error is used (EDESTADDRREQ).
Fix this by using the calculated error.
Also we need to note whether a server responded on one of its endpoints so
that we can priorise an error from an abort message over local and network
errors.
Fixes: 4584ae96ae ("afs: Fix missing net error handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Don't use the running state for VL server probes to make decisions about
which server to use as the state is cleared at the start of a probe and
intermediate values might also be misleading.
Instead, add a separate 'latest known' rtt in the afs_vlserver struct and a
flag to indicate if the server is known to be responding and update these
as and when we know what to change them to.
Fixes: 3bf0fb6f33 ("afs: Probe multiple fileservers simultaneously")
Signed-off-by: David Howells <dhowells@redhat.com>
Convert various bitfields in afs_vlserver::probe to a mask and then expose
this and some other bits of information through /proc/net/afs/<cell>/vlservers
to make it easier to debug VL server communication issues.
Signed-off-by: David Howells <dhowells@redhat.com>
Fix rxrpc_kernel_get_srtt() to indicate the validity of the returned
smoothed RTT. If we haven't had any valid samples yet, the SRTT isn't
useful.
Fixes: c410bf0193 ("rxrpc: Fix the excessive initial retransmission timeout")
Signed-off-by: David Howells <dhowells@redhat.com>
There is a spelling mistake in a message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add emulation/spoofing of SLDT and STR for both 32- and 64-bit
processes.
Wine users have found a small number of Windows apps using SLDT that
were crashing when run on UMIP-enabled systems.
Originally-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reported-by: Andreas Rammhold <andi@notmuch.email>
Signed-off-by: Brendan Shanks <bshanks@codeweavers.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lkml.kernel.org/r/20200710224525.21966-1-bshanks@codeweavers.com
The Rx protocol has a mechanism to help generate RTT samples that works by
a client transmitting a REQUESTED-type ACK when it receives a DATA packet
that has the REQUEST_ACK flag set.
The peer, however, may interpose other ACKs before transmitting the
REQUESTED-ACK, as can be seen in the following trace excerpt:
rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07
rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0
rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0
...
DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx). The incoming
ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the
sequence number of the DATA packet), causing it to be discarded from the Tx
ring. The ACK that was requested (labelled REQ, r=xx references the serial
of the DATA packet) comes after the ping, but the sk_buff holding the
timestamp has gone and the RTT sample is lost.
This is particularly noticeable on RPC calls used to probe the service
offered by the peer. A lot of peers end up with an unknown RTT because we
only ever sent a single RPC. This confuses the server rotation algorithm.
Fix this by caching the information about the outgoing packet in RTT
calculations in the rxrpc_call struct rather than looking in the Tx ring.
A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and
PING-ACK transmissions are recorded in there. When the appropriate
response ACK is received, the buffer is checked for a match and, if found,
an RTT sample is recorded.
If a received ACK refers to a packet with a later serial number than an
entry in the cache, that entry is presumed lost and the entry is made
available to record a new transmission.
ACKs types other than REQUESTED-type and PING-type cause any matching
sample to be cancelled as they don't necessarily represent a useful
measurement.
If there's no space in the buffer on ping/data transmission, the sample
base is discarded.
Fixes: 50235c4b5a ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets")
Signed-off-by: David Howells <dhowells@redhat.com>
There is already a 'struct device' pointer in the drm_panel structure,
that we can access easily from our priv structure, so there's no need
for a separate 'dev' field there.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-3-paul@crapouillou.net
The drm_panel_of_backlight() function must be called after
drm_panel_init(), according to the function's documentation; otherwise
the backlight won't be properly initialized.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-2-paul@crapouillou.net
Pull operating performance points (OPP) framework fixes for 5.9-rc2
from Viresh Kumar:
"This contains the following fixes for 5.9:
- Fix re-enabling of resources (Rajendra Nayak).
- Put OPP table references (Stephen Boyd)."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Enable resources again if they were disabled earlier
opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
opp: Put opp table in dev_pm_opp_set_rate() for empty tables
A number of other files rely on mach/map.h to be indirectly
included from mach/io.h through mach/hardware.h.
Reduce this to the minimal plat/map-base.h and add explicit
includes everywhere else.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-38-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Rather than have the cpufreq drivers touch include the
common headers to get the constants, add a small indirection.
This is still not the proper way that would do this through
the common clk API, but it lets us kill off the header file
usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-37-krzk@kernel.org
[krzk: Rebase and fix -Wold-style-definition]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
There are two identical copies of the s3c2412_cpufreq_setrefresh
function: a static one in the cpufreq driver and a global
version in iotiming-s3c2412.c.
As the function requires the use of a hardcoded register address
from a header that we want to not be visible to drivers, just
move the existing global function and add a declaration in
one of the cpufreq header files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-36-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The cpufreq drivers are split between the machine directory
and the drivers/cpufreq directory. In order to share header
files after we convert s3c to multiplatform, those headers
have to live in a different global location.
Move them to linux/soc/samsung/ in lack of a better place.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-35-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Each of the cpufreq drivers uses a fixed set of register
bits, copy those definitions into the drivers to avoid
including mach/regs-clock.h.
[krzk: Fix build by copying also S3C2410_LOCKTIME]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-34-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The s3c2410fb driver is too deeply intertwined with the s3c24xx
platform code. Change it in a way that avoids the use of platform
header files but having all interface data in a platform_data
header, and the private register definitions next to the driver
itself.
One ugly bit here is that the driver pokes directly into gpio
registers, which are owned by another driver. Passing the
mapped addresses in platform_data is somewhat suboptimal, but
it is a small improvement over the previous version.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-33-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Once we move to sparse irqs, the irq_desc[] array is no
longer accessible, so replace the two uses in bast-irq.c.
The first one can use irq_to_desc(), the second one seems
completely unneeded as we already have a pointer to the
correct descriptor.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-32-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The IRQ_EINT0 constant is a platform detail that is
defined in mach/irqs.h and not visible to drivers once
that header is made private.
Since the same calculation already happens in s3c24xx_set_fiq,
just return the value from there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-31-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Preparing for a later conversion to sparse IRQs, this ensures that
the mach/irqs.h header is still visible in files that reference
an IRQ number.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-30-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Rather than call the internal s3c_gpio_cfgall_range() function
through a platform header, move the code into the set_power
callback that is already exported by the board, and add
a default implementation.
In DT mode, the code already does not set the pin config,
so nothing changes there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-29-krzk@kernel.org
[krzk: Rebase and correct set_power in mach-h1940.c]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The s3c_gpio_cfgall_range() function is an internal interface of the
samsung gpio driver and should not be called directly by drivers, so
move the iis pin initialization into the boards.
This means the pin configuration is only run once at early boot, rather
than each time the driver binds, but the effect should be the same.
Note that the s3c2412-i2s driver has no boards using it in mainline linux,
the driver gets selected for the jive machine but is never instantiated.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-28-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
