There is no guarantee to CMA's placement, so allocating a zone specific
atomic pool from CMA might return memory from a completely different
memory zone. To get around this double check CMA's placement before
allocating from it.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When allocating coherent pool memory for an IOMMU mapping we don't care
about the DMA mask. Move the guess for the initial GFP mask into the
dma_direct_alloc_pages and pass dma_coherent_ok as a function pointer
argument so that it doesn't get applied to the IOMMU case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
And improve a bit the -m description to state that a B/K/M/G suffix is
needed.
Cc: Changbin Du <changbin.du@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During a perf-record, use the -ldebuginfod API to query a debuginfod
server, should the debug data not be found in the usual system
locations. If successful, the usual $HOME/.debug dir is populated.
Tested with:
$ find .
.
./ctags-debuginfo-5.8-26.fc31.x86_64.rpm
./usr
./usr/lib
./usr/lib/debug
./usr/lib/debug/.build-id
./usr/lib/debug/.build-id/ca
./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d
./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d.debug
./usr/lib/debug/usr
./usr/lib/debug/usr/bin
./usr/lib/debug/usr/bin/ctags-5.8-26.fc31.x86_64.debug
$ debuginfod -F .
...
$ rm -rf ~/.debug/ ; mkdir ~/.debug
$ perf record make tags
BUILD: Doing 'make -j8' parallel build
GEN tags
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.107 MB perf.data (1483 samples) ]
$ find ~/.debug | grep ctags
/home/jolsa/.debug/usr/bin/ctags
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes
$ rm -rf ~/.debug/ ; mkdir ~/.debug
$ DEBUGINFOD_URLS=http://localhost:8002 perf record make tags
BUILD: Doing 'make -j8' parallel build
GEN tags
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.108 MB perf.data (1531 samples) ]
$ find ~/.debug | grep ctag
/home/jolsa/.debug/usr/bin/ctags
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/debug
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes
Note the 'debug' file is created in the last run.
Note that currently the debuginfo data are downloaded only on record path,
we still need add this support to perf build-id/report.. and test ;-)
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the function parse_nodes_opt(), the statement "return 0;" is dead
code, remove it.
Signed-off-by: Peng Fan <fanpeng@loongson.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1597401894-27549-1-git-send-email-fanpeng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These changes take advantage of the new capability added in merge commit
00e4db5125 "Allow using computed metrics
in calculating other metrics".
The net is a simplification of the expressions for a handful of metrics,
but no functional change.
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200813222155.268183-1-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a change log after previous enhancements.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-19-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now the __cmd_ftrace() becomes a bit long. This moves the trace option
setting code to a separate function set_tracing_options().
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-18-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This allows us to trace single thread instead of the whole process.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '-D/--delay' to allow us to start tracing some times
later after workload is launched.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-16-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to have a consistent view of all graph tracer options.
The original option '--graph-depth' is marked as deprecated.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-15-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds support to display irq context info for function tracer. To do
this, just specify a '--func-opts irq-info' option.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-12-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '--graph-opts noirqs' to filter out functions executed
in irq context.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-11-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '--graph-opts nosleep-time' which allow us only to
measure on-CPU time. This option is function_graph tracer only.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-10-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This factors out a general function perf_parse_sublevel_options() to
parse sublevel options. The 'sublevel' options is something like the
'--debug' options which allow more sublevel options.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-8-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '--inherit' to allow us trace children
processes spawned by our target.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-7-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '-m/--buffer-size' to allow us set the size of per-cpu
tracing buffer.
Committer testing:
Before running with this option:
# find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat
1408
1408
1408
1408
1408
1408
1408
1408
1408
#
Then, run:
# perf ftrace -m 2048K | head -10
2) | mutex_unlock() {
2) ==========> |
2) | smp_irq_work_interrupt() {
2) | irq_enter() {
2) 0.121 us | rcu_irq_enter();
2) 0.128 us | irqtime_account_irq();
2) 0.719 us | }
2) | __wake_up() {
2) | __wake_up_common_lock() {
2) 0.105 us | _raw_spin_lock_irqsave();
#
Now look at those tracefs knobs:
# find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat
2048
2048
2048
2048
2048
2048
2048
2048
2048
#
This should be similar to the -m option in the other perf tools, such as
'perf record', 'perf trace', etc.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-5-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will reuse this function later.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-4-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '-F/--funcs' to list all available functions to
trace, which is read from tracing file 'available_filter_functions'.
$ sudo ./perf ftrace -F | head
trace_initcall_finish_cb
initcall_blacklisted
do_one_initcall
do_one_initcall
trace_initcall_start_cb
run_init_process
try_to_run_init_process
match_dev_by_label
match_dev_by_uuid
rootfs_init_fs_context
$
Committer notes:
This is the same command line option and for the same purpose as in
'perf probe'.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '-g/-G' options have already implied function_graph tracer should be
used instead of function tracer. So we don't need extra option
'--tracer' in this case.
This patch changes the behavior as below:
- If '-g' or '-G' option is on, then function_graph tracer is used.
- If '-T' or '-N' option is on, then function tracer is used.
- The function_graph has priority over function tracer.
- The option '--tracer' only take effect if neither -g/-G nor -T/-N
is specified.
Here are some examples.
This will start tracing all functions using default tracer:
$ sudo perf ftrace
This will trace all functions using function graph tracer:
$ sudo perf ftrace -G '*'
This will trace function vfs_read using function graph tracer:
$ sudo perf ftrace -G vfs_read
This will trace function vfs_read using function tracer:
$ sudo perf ftrace -T vfs_read
Committer notes:
Using '-h -G' will tell what that option is about, so to further clarify
the above examples:
# perf ftrace -h -G
-G, --graph-funcs <func> Set graph filter on given functions
# perf ftrace -h -g
-g, --nograph-funcs <func> Set nograph filter on given functions
# perf ftrace -h -T
-T, --trace-funcs <func> trace given functions only
# perf ftrace -h -N
-N, --notrace-funcs <func> do not trace given functions
#
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-2-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a linker script check that there are no run-time relocations, and
remove the old one that tries to check via looking for specially-named
sections in the object files.
Drop the tests for -fPIE compiler option and -pie linker option, as they
are available in all supported gcc and binutils versions (as well as
clang and lld).
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-8-keescook@chromium.org
The BFD linker generates run-time relocations for z_input_len and
z_output_len, even though they are absolute symbols.
This is fixed for binutils-2.35 [1]. Work around this for earlier
versions by defining two variables input_len and output_len in addition
to the symbols, and use them via position-independent references.
This eliminates the last two run-time relocations in the head code and
allows us to drop the -z noreloc-overflow flag to the linker.
Move the -pie and --no-dynamic-linker LDFLAGS to LDFLAGS_vmlinux instead
of KBUILD_LDFLAGS. There shouldn't be anything else getting linked, but
this is the more logical location for these flags, and modversions might
call the linker if an EXPORT_SYMBOL is left over accidentally in one of
the decompressors.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=25754
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-7-keescook@chromium.org
The assembly code in head_{32,64}.S, while meant to be
position-independent, generates run-time relocations because it uses
instructions such as:
leal gdt(%edx), %eax
which make the assembler and linker think that the code is using %edx as
an index into gdt, and hence gdt needs to be relocated to its run-time
address.
On 32-bit, with lld Dmitry Golovin reports that this results in a
link-time error with default options (i.e. unless -z notext is
explicitly passed):
LD arch/x86/boot/compressed/vmlinux
ld.lld: error: can't create dynamic relocation R_386_32 against local
symbol in readonly segment; recompile object files with -fPIC or pass
'-Wl,-z,notext' to allow text relocations in the output
With the BFD linker, this generates a warning during the build, if
--warn-shared-textrel is enabled, which at least Gentoo enables by
default:
LD arch/x86/boot/compressed/vmlinux
ld: arch/x86/boot/compressed/head_32.o: warning: relocation in read-only section `.head.text'
ld: warning: creating a DT_TEXTREL in object
On 64-bit, it is not possible to link the kernel as -pie with lld, and
it is only possible with a BFD linker that supports -z noreloc-overflow,
i.e. versions >2.26. This is because these instructions cannot really be
relocated: the displacement field is only 32-bits wide, and thus cannot
be relocated for a 64-bit load address. The -z noreloc-overflow option
simply overrides the linker error, and results in R_X86_64_RELATIVE
relocations that apply a 64-bit relocation to a 32-bit field anyway.
This happens to work because nothing will process these run-time
relocations.
Start fixing this by removing relocations from .head.text:
- On 32-bit, use a base register that holds the address of the GOT and
reference symbol addresses using @GOTOFF, i.e.
leal gdt@GOTOFF(%edx), %eax
- On 64-bit, most of the code can (and already does) use %rip-relative
addressing, however the .code32 bits can't, and the 64-bit code also
needs to reference symbol addresses as they will be after moving the
compressed kernel to the end of the decompression buffer.
For these cases, reference the symbols as an offset to startup_32 to
avoid creating relocations, i.e.:
leal (gdt-startup_32)(%bp), %eax
This only works in .head.text as the subtraction cannot be represented
as a PC-relative relocation unless startup_32 is in the same section
as the code. Move efi32_pe_entry into .head.text so that it can use
the same method to avoid relocations.
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-6-keescook@chromium.org
GCC puts the main function into .text.startup when compiled with -Os (or
-O2). This results in arch/x86/boot/main.c having a .text.startup
section which is currently not included explicitly in the linker script
setup.ld in the same directory.
The BFD linker places this orphan section immediately after .text, so
this still works. However, LLD git, since [1], is choosing to place it
immediately after the .bstext section instead (this is the first code
section). This plays havoc with the section layout that setup.elf
requires to create the setup header, for eg on 64-bit:
LD arch/x86/boot/setup.elf
ld.lld: error: section .text.startup file range overlaps with .header
>>> .text.startup range is [0x200040, 0x2001FE]
>>> .header range is [0x2001EF, 0x20026B]
ld.lld: error: section .header file range overlaps with .bsdata
>>> .header range is [0x2001EF, 0x20026B]
>>> .bsdata range is [0x2001FF, 0x200398]
ld.lld: error: section .bsdata file range overlaps with .entrytext
>>> .bsdata range is [0x2001FF, 0x200398]
>>> .entrytext range is [0x20026C, 0x2002D3]
ld.lld: error: section .text.startup virtual address range overlaps
with .header
>>> .text.startup range is [0x40, 0x1FE]
>>> .header range is [0x1EF, 0x26B]
ld.lld: error: section .header virtual address range overlaps with
.bsdata
>>> .header range is [0x1EF, 0x26B]
>>> .bsdata range is [0x1FF, 0x398]
ld.lld: error: section .bsdata virtual address range overlaps with
.entrytext
>>> .bsdata range is [0x1FF, 0x398]
>>> .entrytext range is [0x26C, 0x2D3]
ld.lld: error: section .text.startup load address range overlaps with
.header
>>> .text.startup range is [0x40, 0x1FE]
>>> .header range is [0x1EF, 0x26B]
ld.lld: error: section .header load address range overlaps with
.bsdata
>>> .header range is [0x1EF, 0x26B]
>>> .bsdata range is [0x1FF, 0x398]
ld.lld: error: section .bsdata load address range overlaps with
.entrytext
>>> .bsdata range is [0x1FF, 0x398]
>>> .entrytext range is [0x26C, 0x2D3]
Add .text.* to the .text output section to fix this, and also prevent
any future surprises if the compiler decides to create other such
sections.
[1] https://reviews.llvm.org/D75225
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20200731230820.1742553-5-keescook@chromium.org
In a previous patch, we have eliminated GOT entries from the decompressor
binary and added an assertion that the .got section is empty. This means
that the GOT fixup routines that exist in both the 32-bit and 64-bit
startup routines have become dead code, and can be removed.
While at it, drop the KEEP() from the linker script, as it has no effect
on the contents of output sections that are created by the linker itself.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200731230820.1742553-4-keescook@chromium.org
Eliminate all GOT entries in the decompressor binary, by forcing hidden
visibility for all symbol references, which informs the compiler that
such references will be resolved at link time without the need for
allocating GOT entries.
To ensure that no GOT entries will creep back in, add an assertion to
the decompressor linker script that will fire if the .got section has
a non-zero size.
[Arvind: move hidden.h to include/linux instead of making a copy]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200731230820.1742553-3-keescook@chromium.org
The .got.plt section contains the part of the GOT which is used by PLT
entries, and which gets updated lazily by the dynamic loader when
function calls are dispatched through those PLT entries.
On fully linked binaries such as the kernel proper or the decompressor,
this never happens, and so in practice, the .got.plt section consists
only of the first 3 magic entries that are meant to point at the _DYNAMIC
section and at the fixup routine in the loader. However, since we don't
use a dynamic loader, those entries are never populated or used.
This means that treating those entries like ordinary GOT entries, and
updating their values based on the actual placement of the executable in
memory is completely pointless, and we can just ignore the .got.plt
section entirely, provided that it has no additional entries beyond
the first 3 ones.
So add an assertion in the linker script to ensure that this assumption
holds, and move the contents out of the [_got, _egot) memory range that
is modified by the GOT fixup routines.
While at it, drop the KEEP(), since it has no effect on the contents
of output sections that are created by the linker itself.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20200731230820.1742553-2-keescook@chromium.org
Since the stack relays on receiving own packets, it was overwriting own
transmit buffer from received packets.
At least theoretically, the received echo buffer can be corrupt or
changed and the session partner can request to resend previous data. In
this case we will re-send bad data.
With this patch we will stop to overwrite own TX buffer and use it for
sanity checking.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Sometimes it makes no sense to search the skb by pkt.dpo, since we need
next the skb within the transaction block. This may happen if we have an
ETP session with CTS set to less than 255 packets.
After this patch, we will be able to work with ETP sessions where the
block size (ETP.CM_CTS byte 2) is less than 255 packets.
Reported-by: Henrique Figueira <henrislip@gmail.com>
Reported-by: https://github.com/linux-can/can-utils/issues/228
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-5-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds check to ensure that the struct net_device::ml_priv is
allocated, as it is used later by the j1939 stack.
The allocation is done by all mainline CAN network drivers, but when using
bond or team devices this is not the case.
Bail out if no ml_priv is allocated.
Reported-by: syzbot+f03d384f3455d28833eb@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-4-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The current stack implementation do not support ECTS requests of not
aligned TP sized blocks.
If ECTS will request a block with size and offset spanning two TP
blocks, this will cause memcpy() to read beyond the queued skb (which
does only contain one TP sized block).
Sometimes KASAN will detect this read if the memory region beyond the
skb was previously allocated and freed. In other situations it will stay
undetected. The ETP transfer in any case will be corrupted.
This patch adds a sanity check to avoid this kind of read and abort the
session with error J1939_XTP_ABORT_ECTS_TOO_BIG.
Reported-by: syzbot+5322482fe520b02aea30@syzkaller.appspotmail.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: linux-stable <stable@vger.kernel.org> # >= v5.4
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-3-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In current J1939 stack implementation, we process all locally send
messages as own messages. Even if it was send by CAN_RAW socket.
To reproduce it use following commands:
testj1939 -P -r can0:0x80 &
cansend can0 18238040#0123
This step will trigger false positive not critical warning:
j1939_simple_recv: Received already invalidated message
With this patch we add additional check to make sure, related skb is own
echo message.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-2-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Current sysrq(t) output task fields name are not aligned with
actual task fields value, e.g.:
kernel: sysrq: Show State
kernel: task PC stack pid father
kernel: systemd S12456 1 0 0x00000000
kernel: Call Trace:
kernel: ? __schedule+0x240/0x740
To make it more readable, print fields name together with task fields
value in the same line, with fixed width:
kernel: sysrq: Show State
kernel: task:systemd state:S stack:12920 pid: 1 ppid: 0 flags:0x00000000
kernel: Call Trace:
kernel: __schedule+0x282/0x620
Signed-off-by: Libing Zhou <libing.zhou@nokia-sbell.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200814030236.37835-1-libing.zhou@nokia-sbell.com
Intel SPR platform uses fixed 16 bit energy unit for DRAM RAPL domain,
and fixed 0 bit energy unit for Psys RAPL domain.
After this, on SPR platform the energy counters appear in perf list.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Link: https://lore.kernel.org/r/20200811153149.12242-4-rui.zhang@intel.com
There will be more platforms with different fixed energy units.
Enhance the code to support different RAPL unit quirks for different
platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Link: https://lore.kernel.org/r/20200811153149.12242-3-rui.zhang@intel.com
This fixes a problem introduced by commit:
5fb5273a90 ("perf/x86/rapl: Use new MSR detection interface")
that perf event sysfs attributes for psys RAPL domain are missing.
Fixes: 5fb5273a90 ("perf/x86/rapl: Use new MSR detection interface")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20200811153149.12242-2-rui.zhang@intel.com
syzkaller reports splat:
------------[ cut here ]------------
Buffer overflow detected (80 < 137)!
Call Trace:
do_ebt_get_ctl+0x2b4/0x790 net/bridge/netfilter/ebtables.c:2317
nf_getsockopt+0x72/0xd0 net/netfilter/nf_sockopt.c:116
ip_getsockopt net/ipv4/ip_sockglue.c:1778 [inline]
caused by a copy-to-user with a too-large "*len" value.
This adds a argument check on *len just like in the non-compat version
of the handler.
Before the "Fixes" commit, the reproducer fails with -EINVAL as
expected:
1. core calls the "compat" getsockopt version
2. compat getsockopt version detects the *len value is possibly
in 64-bit layout (*len != compat_len)
3. compat getsockopt version delegates everything to native getsockopt
version
4. native getsockopt rejects invalid *len
-> compat handler only sees len == sizeof(compat_struct) for GET_ENTRIES.
After the refactor, event sequence is:
1. getsockopt calls "compat" version (len != native_len)
2. compat version attempts to copy *len bytes, where *len is random
value from userspace
Fixes: fc66de8e16 ("netfilter/ebtables: clean up compat {get, set}sockopt handling")
Reported-by: syzbot+5accb5c62faa1d346480@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ConfigView::setOptionMode() only gets access to the 'list' member.
Move it to the more relevant ConfigList class.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:
if (e->y() <= header()->geometry().bottom()) {
Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.
Since the origin of e->y() starts from the bottom of the header,
this check is odd.
Going forward, you can right-click anywhere in the tree to get the
pop-up menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These icon data are used by ConfigItem, but stored in each instance
of ConfigView. There is no point to keep the same data in each of 3
instances, "menu", "config", and "search".
Move the icon data to the more relevant ConfigItem class, and make
them static members.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
