Use DCN21 functions instead of DCE110
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently navy_flounder is using sienna_cichlid_dmcub.bin.
[How]
Create a seperate define so navy_flounder will use its own firmware.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors could suffer symbol unlock but cannot send HPD IRQ to
notic source device to handle link loss. This makes monitor stuck in
abnormal status and causes black screen.
[How]
According to the suggestion from scalar vendor, to check lane status
again after link training done. That can improve the comaptibility
from current production monitors.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dcn3_update_clocks there are situations where dppclk is not
lowered (i.e. stays the same), but DTO still needs to be increased
before we program pipe frontend (i.e. in prepare_bandwidth). If we
don't program the new DTO value before we program the pipe,
we will underflow as soon as the pipe lock is released until the
next call to dcn3_update_clocks where the DTO is updated.
[How]
Remove dppclk check before programming new DTO value.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Fix naming and return bits rather than bytes per pixel for
naming consistency. Because registers return Bytes per pixel,
but DSC Config structure is expecting bits per pixel as input.
So when returning the value convert from bytes into bits.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Struct dcn_dsc_state is used for reading current state
and parameters of DSC on a pipe, the target rate parameter
uses bytes per pixel even though its reading BITS_PER_PIXEL
register.
[How]
Changing it to Bits Per Pixel for consistency.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change replaces older looping code in favor of these functions.
[How]
There are built in functions for extracting global sync params
during mode validation now.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. allow asic to handle sensor type by itself.
2. if not, use smu common sensor to handle it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These tables have _COUNT number of elements so the comparisons should be
>= instead of > to prevent reading one element beyond the end of the
array.
Fixes: 8264ee69f0 ("drm/amd/powerplay: drop unused code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update sienna_cichlid driver if header and related files.
Support new smu metrics for pre & postDS frequency.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Take back patch:drop unnecessary message support check
Because the gpu reset fail problem on renoir can be fixed by:
drm/amd/powerplay: skip invalid msg when smu set mp1 state
It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear
code layer.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jpeg ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set valid_in_vf to false for the message not support in vf mode on
sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The below 3 messages are not supported on Renoir
SMU_MSG_PrepareMp1ForShutdown
SMU_MSG_PrepareMp1ForUnload
SMU_MSG_PrepareMp1ForReset
It needs to revert patch:
drm/amd/powerplay: drop unnecessary message support check
to avoid set mp1 state fail during gpu reset on renoir.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will tell users if the faulty page has been written to
external eeprom device in dmesg log.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a DRM_ERROR error message. Fix it.
This got lost in a merge, restore the fix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4afaa61db9)
x86:
* Report last CPU for debugging
* Emulate smaller MAXPHYADDR in the guest than in the host
* .noinstr and tracing fixes from Thomas
* nested SVM page table switching optimization and fixes
Generic:
* Unify shadow MMU cache data structures across architectures
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8pC+oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcOwgAjomqtEqQNlp7DdZT7VyyklzbxX1/
ud7v+oOJ8K4sFlf64lSthjPo3N9rzZCcw+yOXmuyuITngXOGc3tzIwXpCzpLtuQ1
WO1Ql3B/2dCi3lP5OMmsO1UAZqy9pKLg1dfeYUPk48P5+p7d/NPmk+Em5kIYzKm5
JsaHfCp2EEXomwmljNJ8PQ1vTjIQSSzlgYUBZxmCkaaX7zbEUMtxAQCStHmt8B84
33LczwXBm3viSWrzsoBV37I70+tseugiSGsCfUyupXOvq55d6D9FCqtCb45Hn4Vh
Ik8ggKdalsk/reiGEwNw1/3nr6mRMkHSbl+Mhc4waOIFf9dn0urgQgOaDg==
=YVx0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- implement diag318
x86:
- Report last CPU for debugging
- Emulate smaller MAXPHYADDR in the guest than in the host
- .noinstr and tracing fixes from Thomas
- nested SVM page table switching optimization and fixes
Generic:
- Unify shadow MMU cache data structures across architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
KVM: SVM: Fix sev_pin_memory() error handling
KVM: LAPIC: Set the TDCR settable bits
KVM: x86: Specify max TDP level via kvm_configure_mmu()
KVM: x86/mmu: Rename max_page_level to max_huge_page_level
KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR
KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch
KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
KVM: VMX: Make vmx_load_mmu_pgd() static
KVM: x86/mmu: Add separate helper for shadow NPT root page role calc
KVM: VMX: Drop a duplicate declaration of construct_eptp()
KVM: nSVM: Correctly set the shadow NPT root level in its MMU role
KVM: Using macros instead of magic values
MIPS: KVM: Fix build error caused by 'kvm_run' cleanup
KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF
KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support
KVM: VMX: optimize #PF injection when MAXPHYADDR does not match
KVM: VMX: Add guest physical address check in EPT violation and misconfig
KVM: VMX: introduce vmx_need_pf_intercept
KVM: x86: update exception bitmap on CPUID changes
KVM: x86: rename update_bp_intercept to update_exception_bitmap
...
[Why]
This was added in the past to solve the issue of not knowing when
to stall for medium and full updates in DM.
Since DC is ultimately decides what requires bandwidth changes we
wanted to make use of it directly to determine this.
The problem is that we can't actually pass any of the stream or surface
updates into DC global validation, so we don't actually check if the new
configuration is valid - we just validate the old existing config
instead and stall for outstanding commits to finish.
There's also the problem of grabbing the DRM private object for
pageflips which can lead to page faults in the case where commits
execute out of order and free a DRM private object state that was
still required for commit tail.
[How]
Now that we reset the plane in DM with the same conditions DC checks
we can have planes go through DC validation and we know when we need
to check and stall based on whether the stream or planes changed.
We mark lock_and_validation_needed whenever we've done this, so just
go back to using that instead of dm_determine_update_type_for_commit.
Since we'll skip resetting the plane for a pageflip we will no longer
grab the DRM private object for pageflips as well, avoiding the
page fault issued caused by pageflipping under load with commits
executing out of order.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MEDIUM or FULL updates can require global validation or affect
bandwidth. By treating these all simply as surface updates we aren't
actually passing this through DC global validation.
[How]
There's currently no way to pass surface updates through DC global
validation, nor do I think it's a good idea to change the interface
to accept these.
DC global validation itself is currently stateless, and we can move
our update type checking to be stateless as well by duplicating DC
surface checks in DM based on DRM properties.
We wanted to rely on DC automatically determining this since DC knows
best, but DM is ultimately what fills in everything into DC plane
state so it does need to know as well.
There are basically only three paths that we exercise in DM today:
1) Cursor (async update)
2) Pageflip (fast update)
3) Full pipe programming (medium/full updates)
Which means that anything that's more than a pageflip really needs to
go down path #3.
So this change duplicates all the surface update checks based on DRM
state instead inside of should_reset_plane().
Next step is dropping dm_determine_update_type_for_commit and we no
longer require the old DC state at all for global validation.
Optimization can come later so we don't reset DC planes at all for
MEDIUM udpates and avoid validation, but we might require some extra
checks in DM to achieve this.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
So we're not racing with userspace or deadlocking DM.
[How]
These flags are now stored on dm_plane_state itself and acquried and
validated during commit_check, so just use those instead.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We're racing with userspace as the flags could potentially change
from when we acquired and validated them in commit_check.
[How]
We unfortunately can't drop this function in its entirety from
prepare_planes since we don't know the afb->address at commit_check
time yet.
So instead of querying new tiling_flags and tmz_surface use the ones
from the plane_state directly.
While we're at it, also update the force_disable_dcc option based
on the state from atomic check.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enabling or disable DCC or switching between tiled and linear formats
can require bandwidth updates.
They're currently skipping all DC validation by being treated as purely
surface updates.
[How]
Treat tiling_flag changes (which encode DCC state) as a condition for
resetting the plane.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Store these in advance so we can reuse them later in commit_tail without
having to reserve the fbo again.
These will also be used for checking for tiling changes when deciding
to reset the plane or not.
[How]
This change should mostly be a refactor. Only commit check is affected
for now and I'll drop the get_fb_info calls in prepare_planes and
commit_tail after.
This runs a prepass loop once we think that all planes have been added
to the context and replaces the get_fb_info calls with accessing the
dm_plane_state instead.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows UMD to know if TMZ is supported and enabled.
This commit also bumps KMS_DRIVER_MINOR because if we don't
UMD can't tell if "ids_flags & AMDGPU_IDS_FLAGS_TMZ == 0" means
"tmz is not enabled" or "tmz may be enabled but the kernel doesn't
report it".
v2: use amdgpu_is_tmz() and reworded commit message.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gpu_metrics support on legacy powerplay routines.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Renoir gpu metrics export interface.
V2: use memcpy to make code more compact
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although it does not bring any problem for now, the coming gpu
metrics interface needs to handle them differently based on the
asic type.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be shared around all SMU V11 asics.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A new interface for UMD to retrieve gpu metrics data.
V2: rich the documentation
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thus we can provide an interface for UMD to retrieve gpu metrics data.
V2: better naming and comments
V3: two structures created for dGPU and APU separately
V4: add driver attached timestamp
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Arcturus, the softmin/max settings from driver are permitted on the
latest(54.26 later) SMU firmware. Thus enabling them in driver.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
