tegra_i2c_runtime_resume does not disable prior enabled clocks
properly.
This patch fixes it.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
clk_enable, clk_disable, clk_prepare, and clk_unprepare APIs have
implementation for checking clk pointer not NULL and clock consumers
can safely call these APIs without NULL pointer check.
So, this patch cleans up Tegra i2c driver to remove explicit checks
before these APIs.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Tegra VI I2C is part of VE power domain and typically used for
camera usecases.
VE power domain is not always on and is non-IRQ safe. So, IRQ safe
device cannot be attached to a non-IRQ safe domain as it prevents
powering off the PM domain and generic power domain driver will warn.
Current driver marks all I2C devices as IRQ safe and VI I2C device
does not require IRQ safe as it will not be used for atomic transfers.
This patch has fix to make VI I2C as non-IRQ safe.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The RXFLR is possible larger than rx_left in Rockchip SPI, fix it.
Fixes: 01b59ce5da ("spi: rockchip: use irq rather than polling")
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20200723004356.6390-3-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FIFO depth of SPI V2 is 64 instead of 32, add support for it.
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20200723004356.6390-2-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The burst length can be adjusted according to the transmission
length to improve the transmission rate
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20200723004356.6390-1-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before generic upgrade, both .suspend() and .resume() were invoking
pci_enable_wake(pci_dev, PCI_D3hot, 0). Hence, disabling wakeup in both
states. (Normal trend is .suspend() enables and .resume() disables the
wakeup.)
This was ambiguous and may be buggy. Instead of replicating the legacy
behavior, drop the wakeup-disable call.
Fixes: f185bcc779 ("spi: spi-topcliff-pch: use generic power management")
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200727172936.661567-1-vaibhavgupta40@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simply copying all xfers from userspace into one bounce buffer causes
alignment problems if the SPI controller uses DMA.
Ensure that all transfer data blocks within the rx and tx bounce buffers
are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).
Alignment may increase the usage of the bounce buffers. In some cases,
the buffers may need to be increased using the "bufsiz" module
parameter.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to define typedefs for the callbacks, because there is not a
single user except blk_mq_ops.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The desc->name field is allocated with devm_kstrdup, but is also kfreed
on the error path, causing it to be double freed. Remove the kfree on
the error path.
Fixes: 8d9f8d57e0 ("regulator: Add driver for cros-ec-regulator")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200728091909.2009771-1-pihsun@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This set of patches is required for facilitating system S0ix
entry when the DSP is in D0I3. This first patch adds the missing
CORB/RIRB DMA stop and restart to the suspend/resume sequence along
with powering up/down the links. The second patch ensures that the
FW traces are disabled when the system enters S0ix with the DSP in D0I3.
Marcin Rajwa (2):
ASoC: SOF: Intel: fix the suspend procedure to support s0ix entry
ASoC: SOF: Intel: disable traces when switching to S0Ix D0I3
sound/soc/sof/intel/hda-dsp.c | 48 ++++++++++++++++++++++++++++++++---
1 file changed, 44 insertions(+), 4 deletions(-)
--
2.25.1
Update the shutdown GPIO property to be shutdown from shut-down.
Fixes: c173dba44c ("ASoC: tas2562: Introduce the TAS2562 amplifier")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200723160838.9738-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch converts Everest Semiconductor ES8316 low power audio
CODEC binding to DT schema.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200724155933.1040501-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
tag_set_list is only accessed under the tag_set_lock lock. There is
no need for using the _rcu list functions.
The _rcu list function were introduced to allow read access to the
tag_set_list protected under RCU, see 705cda97ee ("blk-mq: Make it
safe to use RCU to iterate over blk_mq_tag_set.tag_list") and
05b7941394 ("Revert "blk-mq: don't handle TAG_SHARED in restart"").
Those changes got reverted later but the cleanup commit missed a
couple of places to undo the changes.
Fixes: 97889f9ac2 ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()"
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver only uses the registers up to offset 0x54. Since the EFUSE
registers are in the middle of the NEMC registers, we only request
the registers we will use for now - that way the EFUSE driver can
probe too.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/20200728152629.28878-1-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Here are the USB-serial updates for 5.9-rc1, including:
- console flow-control support
- simulated line-breaks on some ch341
- hardware flow-control fixes for cp210x
- break-detection and sysrq fixes for ftdi_sio
- sysrq optimisations
- input parity checking for cp210x
Included are also some new device ids and various clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXyAjIwAKCRALxc3C7H1l
CHruAQDTSejnRcrxMqU6mqL2AuEw+fABGUxjE+ah/HbXMf7CDwD/d0XQFimA8U8J
ovxTVm35R+vYQ7T7jTNuVxso6nWGxw8=
=15J7
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.9-rc1
Here are the USB-serial updates for 5.9-rc1, including:
- console flow-control support
- simulated line-breaks on some ch341
- hardware flow-control fixes for cp210x
- break-detection and sysrq fixes for ftdi_sio
- sysrq optimisations
- input parity checking for cp210x
Included are also some new device ids and various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (31 commits)
USB: serial: qcserial: add EM7305 QDL product ID
USB: serial: iuu_phoenix: fix led-activity helpers
USB: serial: sierra: clean up special-interface handling
USB: serial: cp210x: use in-kernel types in port data
USB: serial: cp210x: drop unnecessary packed attributes
USB: serial: cp210x: add support for TIOCGICOUNT
USB: serial: cp210x: add support for line-status events
USB: serial: cp210x: disable interface on errors in open
USB: serial: drop redundant transfer-buffer casts
USB: serial: drop extern keyword from function declarations
USB: serial: drop unnecessary sysrq include
USB: serial: add sysrq break-handler dummy
USB: serial: inline sysrq dummy function
USB: serial: only process sysrq when enabled
USB: serial: only set sysrq timestamp for consoles
USB: serial: ftdi_sio: fix break and sysrq handling
USB: serial: ftdi_sio: clean up receive processing
USB: serial: ftdi_sio: make process-packet buffer unsigned
USB: serial: use fallthrough pseudo-keyword
USB: serial: ch341: fix missing simulated-break margin
...
We should always disable DMA trace on S0Ix. When staying at S0-D0I3,
we should enable DMA trace while both DMA Trace debug is enabled and
hda_enable_trace_D0I3_S0 is set. This commit corrects the existed
logic errors about that.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727183613.1419005-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes the suspend & resume procedure to allow entry into the
low power states with some streams being active as a wake source - wake on
voice is a perfect example. The current implementation does not stop
the CORB/RIRB DMA and does not power down the HDA links. With firmware's
help, the platform has been able to still enter s0ix state on older
platforms, but the sequence is still incorrect, and the additional
driver actions are needed to ensure correct s0ix behaviour.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200727183613.1419005-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LCDIF in the i.MX6SX and i.MX7 have a second plane called the alpha
plane. Support it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-23-laurent.pinchart@ideasonboard.com
The mxsfb_set_pixel_fmt() and mxsfb_set_bus_fmt() functions both deal
with format configuration, are always called in a row from
mxsfb_crtc_mode_set_nofb(), and set fields from the LCDC_CTRL register.
This requires a read-modify-update cycle in mxsfb_set_bus_fmt(). Make
this more efficient by merging them together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-21-laurent.pinchart@ideasonboard.com
The mxsfb_set_pixel_fmt() function returns an error when the selected
pixel format is unsupported. This can never happen, as such errors are
caught by the DRM core. Remove the error check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-20-laurent.pinchart@ideasonboard.com
The LCDIF present in the i.MX6SX has extra features compared to
the i.MX28. It has however lost its IP version register, so no official
version number is known. Bump the version to MXSFB_V6 following the i.MX
version, in preparation for support for the additional features.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-18-laurent.pinchart@ideasonboard.com
Extend the Kconfig option description by listing the i.MX7 and i.MX8M
SoCs, as they are supported by the same driver. Replace the list of SoCs
in the short description with just "(e)LCDIF LCD controller" to avoid
expanding it further in the future as support for more SoCs is added.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-17-laurent.pinchart@ideasonboard.com
Enable vblank handling when the CRTC is turned on and disable it when it
is turned off. This requires moving vblank init after the KMS pipeline
initialisation, otherwise drm_vblank_init() gets called with 0 CRTCs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-15-laurent.pinchart@ideasonboard.com
The driver attempts agressive power management by enabling and disabling
the AXI clock around register accesses. This results in attempts to
enable and disable the clock in the IRQ handler, which is a no-go as
preparing or unpreparing the clock may sleep.
On the other hand, the driver enables the AXI clock when enabling the
CRTC and keeps it enabled until the CRTC is disabled. This is correct,
and renders the power management attempt pointless, as interrupts are
not supposed to occur when the CRTC is off.
The same reasoning can be applied to the CRTC .enable_vblank() and
.disable_vblank() that are not supposed to be called when the CRTC off
and thus don't require manual handling of the AXI clock. Furthermore,
vblank handling is never enabled, which results in the vblank enable and
disable handlers never being called.
To fix this, remove the manual clock handling in the IRQ, the CRTC
.enable_vblank() and .disable_vblank() handlers and the plane
.atomic_update() handler. We however need to handle the clock manually
in mxsfb_irq_disable() as is calls .disable_vblank() manually and is
used both at probe and remove time.
The clock disabling is also moved to the last step of the
mxsfb_crtc_atomic_disable() function, to prepare for enabling vblank
handling.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-14-laurent.pinchart@ideasonboard.com
The vblank event is armed in the plane .atomic_update(). This works fine
as we have a single plane, and was the only option when the driver was
using the drm_simple_kms_helper helper, but will break as soon as
multiple planes are supported. Move it to CRTC .atomic_flush().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-13-laurent.pinchart@ideasonboard.com
The DRM simple display pipeline helper only supports a single plane. In
order to prepare for support of the alpha plane on i.MX6SX and i.MX7,
move away from the helper. No new feature is added.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-12-laurent.pinchart@ideasonboard.com
The mxsfb_crtc.c file doesn't handle just the CRTC, but also the other
KMS objects. Rename it accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-11-laurent.pinchart@ideasonboard.com
A fair number of includes are not needed. Drop them, and add a couple of
required includes that were included indirectly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-10-laurent.pinchart@ideasonboard.com
mxsfb_crtc.c defines several macros related to register addresses and
bit, which duplicates macros from mxsfb_regs.h. Use the macros from
mxsfb_regs.h instead and remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-9-laurent.pinchart@ideasonboard.com
The LCDC_CTRL register is located at address 0x0000. Some of the
accesses to the register simply use the mxsfb->base address. Reference
the LCDC_CTRL register explicitly instead to clarify the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-8-laurent.pinchart@ideasonboard.com
The mxsfb_reset_block() function isn't special, pass it the
mxsfb_drm_private pointer instead of a pointer to the base address.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-7-laurent.pinchart@ideasonboard.com
Replace the convoluted way to set the format and bus width through
difficult to read macros with more explicit ones. Also remove the
outdated comment related to the limitations on bus width setting as it
doesn't apply anymore (the bus width can be specified through the
display_info bus format).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-6-laurent.pinchart@ideasonboard.com
mxsfb_regs.h defines macros related to register bits. Some of them are
not used and don't clearly map to any particular register, so their
purpose isn't known. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-5-laurent.pinchart@ideasonboard.com
Using BIT() is preferred over manual shifts as it's more readable,
handles the 1 << 31 case properly, and avoids other mistakes as shown by
the DEBUG0_HSYNC and DEBUG0_VSYNC bits (that are currently unused). Use
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-4-laurent.pinchart@ideasonboard.com
Replace the manual connector implementation based on drm_panel with the
drm_panel_bridge helper. This simplifies the mxsfb driver by removing
connector-related code, and standardizing all pipeline control
operations on bridges.
A hack is needed to get hold of the connector, as that's our only source
of bus flags and formats for now. As soon as the bridge API provides us
with that information this can be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-3-laurent.pinchart@ideasonboard.com
Commit 8e93f1028d ("drm/mxsfb: Use drm_fbdev_generic_setup()")
replaced fbdev handling with drm_fbdev_generic_setup() but left
inclusion of the drm/drm_fb_cma_helper.h header. Remove it.
Fixes: 8e93f1028d ("drm/mxsfb: Use drm_fbdev_generic_setup()")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-2-laurent.pinchart@ideasonboard.com
This patch is a fix to patch "bcache: fix bio_{start,end}_io_acct with
proper device". The previous patch uses a hack to temporarily set
bi_disk to bcache device, which is mistaken too.
As Christoph suggests, this patch uses disk_{start,end}_io_acct() to
count I/O for bcache device in the correct way.
Fixes: 85750aeb74 ("bcache: use bio_{start,end}_io_acct")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add ACPI support in the fsl-mc driver. Driver parses MC DSDT table to
extract memory and other resources.
Interrupt (GIC ITS) information is extracted from the MADT table
by drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c.
IORT table is parsed to configure DMA.
Signed-off-by: Makarand Pawagi <makarand.pawagi@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20200619082013.13661-13-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The DPRC driver is not taking into account the msi-map property
and assumes that the icid is the same as the stream ID. Although
this assumption is correct, generalize the code to include a
translation between icid and streamID.
Furthermore do not just copy the MSI domain from parent (for child
containers), but use the information provided by the msi-map property.
If the msi-map property is missing from the device tree retain the old
behaviour for backward compatibility ie the child DPRC objects
inherit the MSI domain from the parent.
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200619082013.13661-12-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
