Two new helpers: given a process and regset, dump into a buffer.
regset_get() takes a buffer and size, regset_get_alloc() takes size
and allocates a buffer.
Return value in both cases is the amount of data actually dumped in
case of success or -E... on error.
In both cases the size is capped by regset->n * regset->size, so
->get() is called with offset 0 and size no more than what regset
expects.
binfmt_elf.c callers of ->get() are switched to using those; the other
caller (copy_regset_to_user()) will need some preparations to switch.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All i2c_new_device-alike functions return ERR_PTR these days, but this
fallback function was missed.
Fixes: 2dea645ffc ("i2c: acpi: Return error pointers from i2c_acpi_new_device()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[wsa: changed from 'ENOSYS' to 'ENODEV']
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Karsten Graul says:
====================
net/smc: show unique rsn code for exceeded max dmb count
Resolve some confusion at the user side when the reason code shows
out-of-memory but actually there is enough memory left.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the maximum dmb buffer limit for an ism device is reached no more
dmb buffers can be registered. When this happens the reason code is set
to SMC_CLC_DECL_MEM indicating out-of-memory. This is the same reason
code that is used when no memory could be allocated for the new dmb
buffer.
This is confusing for users when they see this error but there is more
memory available. To solve this set a separate new reason code when the
maximum dmb limit exceeded.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the ism driver allocates a new dmb in ism_alloc_dmb() it must
first check for and reserve a slot in the sba bitmap. When
find_next_zero_bit() finds no free slot then the return code is -ENOMEM.
This code conflicts with the error when the alloc() fails later in the
code. As a result of that the caller can not differentiate
between out-of-memory conditions and sba-bitmap-full conditions.
Fix that by using the return code -ENOSPC when the sba slot
reservation failed.
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare the bridge driver for use in a chained setup.
- Replacing direct use of drm_panel with drm_panel_bridge support.
- Make the connector creation optional
Note: the bridge panel will use the connector type from the panel.
v3:
- Fix wrong logic in connector creation (Laurent)
v2:
- Use panel_bridge for local variable name to align with other drivers
- Fix that connector was created twice (Laurent)
- Set bridge.type to DRM_MODE_CONNECTOR_LVDS.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-6-sam@ravnborg.org
Add the get_edid() bridge operation to prepare for
use as a chained bridge.
Add helper function that is also used by the connector.
v2:
- Fix memory leak (Laurent)
- Do not save a copy of edid, read it when needed
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-5-sam@ravnborg.org
With the bridge operations implemented the last step to prepare
this driver for a chained setup is the use of the bridge panel driver.
The bridge panel driver is only used when a port@2 is present in
the DT. So when the display driver requests a connector
support both situations:
- connector created by bridge panel driver
- connector created by this driver
And on top, support that the display driver creates the connector,
which is the preferred setup.
Note: the bridge panel will use the connector type from the panel.
v3:
- Fix wrong logic in connector creation (Laurent)
v2:
- Merge connector and drm_panel_bridge patches
and fix so we do not create two connectors (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-4-sam@ravnborg.org
Prepare the bridge driver for chained operation by adding
support for the detect operation.
v3:
- Fix code to make it readable (Laurent)
v2:
- Do not announce detect operation if there is no hpd pin (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-2-sam@ravnborg.org
list_for_each_safe is able to handle an empty list.
The only effect of avoiding the loop is not initializing the
index variable.
Drop list_empty tests in cases where these variables are not
used.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
<smpl>
@@
expression x,e;
iterator name list_for_each_safe;
statement S;
identifier i,j;
@@
-if (!(list_empty(x))) {
list_for_each_safe(i,j,x) S
- }
... when != i
when != j
(
i = e;
|
? j = e;
)
</smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've received a regression report on Intel HD-audio controller that
wakes up immediately after S3 suspend. The bisection leads to the
commit c4c8dd6ef8 ("ALSA: hda: Skip controller resume if not
needed"). This commit replaces the system-suspend to use
pm_runtime_force_suspend() instead of the direct call of
__azx_runtime_suspend(). However, by some really mysterious reason,
pm_runtime_force_suspend() causes a spurious wakeup (although it calls
the same __azx_runtime_suspend() internally).
As an ugly workaround for now, revert the behavior to call
__azx_runtime_suspend() and __azx_runtime_resume() for those old Intel
platforms that may exhibit such a problem, while keeping the new
standard pm_runtime_force_suspend() and pm_runtime_force_resume()
pair for the remaining chips.
Fixes: c4c8dd6ef8 ("ALSA: hda: Skip controller resume if not needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208649
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200727164443.4233-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 'inode' argument to handle_event(), sometimes referred to as
'to_tell' is somewhat obsolete.
It is a remnant from the times when a group could only have an inode mark
associated with an event.
We now pass an iter_info array to the callback, with all marks associated
with an event.
Most backends ignore this argument, with two exceptions:
1. dnotify uses it for sanity check that event is on directory
2. fanotify uses it to report fid of directory on directory entry
modification events
Remove the 'inode' argument and add a 'dir' argument.
The callback function signature is deliberately changed, because
the meaning of the argument has changed and the arguments have
been documented.
The 'dir' argument is set to when 'file_name' is specified and it is
referring to the directory that the 'file_name' entry belongs to.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The HiSilicon non-ECAM PCIe has been broken since March 2016 commit
7e57fd1444 ("PCI: designware: Move Root Complex setup code to
dw_pcie_setup_rc()"). The reason is this commit moved the iATU setup code
from dw_pcie_host_init() to dw_pcie_setup_rc(), but the hisi driver never
calls dw_pcie_setup_rc(). The result is the PCI memory space is never
configured and the driver can't work. It's also clear it has an iATU as
the config space accesses use it.
There's also no dts file using either "hisilicon,hip05-pcie" or
"hisilicon,hip06-pcie".
Link: https://lore.kernel.org/r/20200724224204.3249055-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
drivers/net/ethernet/intel/igc/igc_mac.c:424 igc_check_for_copper_link()
error: uninitialized symbol 'link'.
This patch come to fix this warning and initialize the 'link' symbol.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 707abf0695 ("igc: Add initial LTR support")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove ictxptc, ictxatc, cbtmpc, cbrdpc, cbrmpc and htcbdpc fields from
the hw_stats structure. Accordance to the i225 device
specification these fields not in use.
This patch come to clean up the driver code.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
collision_delta, tx_packet_delta, txcw, adaptive_ifs and
has_fwsm fields not in use.
This patch come to clean up the driver code.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
LED control currently not implemented.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
IGC_ICTXPTC and IGC_ICTXATC are already defined elsewhere, remove this
double definition. Also, remove unneeded registers as they are not
applicable to i225 devices.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tx Queue Min Threshold Count register no applicable for the i225 device.
This patch comes to clean up it.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The statistics of this register are being tracked, however, the register
was inadvertently missed when implementing igc_clear_hw_cntrs_base().
The register is clear on read, so add it to the function so that the
register is cleared when requested so the tracked count is accurate.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Though we are populating and tracking ictxqec, the value is not being used
for anything so remove it altogether and save the register read.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[a couple of unused variables left behind by the previous version
spotted by kernel test robot <lkp@intel.com>]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make the connector creation optional to enable usage of the
megachips-stdpxxxx-ge-b850v3-fw bridge with the DRM bridge connector
helper.
v2:
- Set bridge.type to DRM_MODE_CONNECTOR_DisplayPort
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-14-sam@ravnborg.org
To prepare for a chained bridge setup add support for the
get_edid bridge operation.
There is no need for a copy of the edid - so drop
the pointer to the copy.
v2:
- Fix so we do not leak memory (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-13-sam@ravnborg.org
To prepare for use in a chained bridge setup enable the
detect operation.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-12-sam@ravnborg.org
Fix so drm_device is read from the bridge.
This is a preparation for the connector being optional.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-11-sam@ravnborg.org
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
The connecter is now either created by the panel bridge or the display
driver. So all code for connector creation in this driver is no longer
relevant and thus dropped.
The connector code had some special polling handling:
connector.polled = DRM_CONNECTOR_POLL_HPD;
drm_helper_hpd_irq_event(ps8622->bridge.dev);
This code was most likely added to speed up detection of the connector.
If really needed then this functionality belongs somewhere else.
Note: the bridge panel will use the connector type from the panel.
v2:
- Fix to avoid creating connector twice (Laurent)
- Drop all connector code - defer to bridge panel
- Use panel_bridge for local variable to align with other drivers
- Set bridge.type to DRM_MODE_CONNECTOR_LVDS;
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-9-sam@ravnborg.org
Prepare the tc358764 bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
The bridge panel will use the connector type reported by the panel,
where the connector for this driver hardcodes DRM_MODE_CONNECTOR_LVDS.
The tc358764 did not add any additional info the the connector so the
connector creation is passed to the bridge panel driver.
v3:
- Merge with patch to make connector creation optional to avoid
creating two connectors (Laurent)
- Pass connector creation to bridge panel, as this bridge driver
did not add any extra info to the connector.
- Set bridge.type to DRM_MODE_CONNECTOR_LVDS.
v2:
- Use PTR_ERR_OR_ZERO() (kbuild test robot)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: kbuild test robot <lkp@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-5-sam@ravnborg.org
Drop drm_connector handling that is not needed:
- drm_dev_register() in the display controller driver takes
care of registering connectors.
So the call to drm_connector_register() call is not needed in the bridge
driver.
- Use of drm_connector_unregister() is only required for drivers that
explicit have called drm_dev_register.
- The reference counting using drm_connector_put() is likewise not needed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-4-sam@ravnborg.org
All panels shall report a connector type.
panel-simple has a lot of panels with no connector_type,
and for these fall back to DPI as the default.
v2:
- Rebased on top of validation of panel description
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-3-sam@ravnborg.org
Warn if we detect a panel with incomplete/wrong description.
This is inspired by a similar patch by Laurent that introduced checks
for LVDS panels - this extends the checks to the remaining type of
connectors.
This is known to warn for some of the existing panels but added
despite this as we need help from people using the panels to
add the missing info.
The checks are not complete but will catch the most common mistakes.
The checks at the same time serve as documentation for the minimum
required description for a panel.
The checks uses dev_warn() as we know this will hit. WARN() was
too noisy at the moment for anything else than LVDS.
v3:
- %d => %u for bpc (Laurent)
v2:
- Use dev_warn (Laurent)
- Check for empty bus_flags
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-2-sam@ravnborg.org
The error codes in _ib_modify_qp() are supposed to be negative errno.
Fixes: 7a5c938b9e ("IB/core: Check for rdma_protocol_ib only after validating port_num")
Link: https://lore.kernel.org/r/1595645787-20375-1-git-send-email-liheng40@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
destroy_prefetch_work() must always be called if the work is not going
to be queued. The num_sge also should have been set to i, not i-1
which avoids the condition where it shouldn't have been called in the
first place.
Cc: stable@vger.kernel.org
Fixes: fb985e278a ("RDMA/mlx5: Use SRCU properly in ODP prefetch")
Link: https://lore.kernel.org/r/20200727095712.495652-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These are missing throughout ucma, it harmlessly copies garbage from
userspace, but in this new code which uses min to compute the copy length
it can result in uninitialized stack memory. Check for minimum length at
the very start.
BUG: KMSAN: uninit-value in ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091
CPU: 0 PID: 8457 Comm: syz-executor069 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1df/0x240 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
ucma_connect+0x2aa/0xab0 drivers/infiniband/core/ucma.c:1091
ucma_write+0x5c5/0x630 drivers/infiniband/core/ucma.c:1764
do_loop_readv_writev fs/read_write.c:737 [inline]
do_iter_write+0x710/0xdc0 fs/read_write.c:1020
vfs_writev fs/read_write.c:1091 [inline]
do_writev+0x42d/0x8f0 fs/read_write.c:1134
__do_sys_writev fs/read_write.c:1207 [inline]
__se_sys_writev+0x9b/0xb0 fs/read_write.c:1204
__x64_sys_writev+0x4a/0x70 fs/read_write.c:1204
do_syscall_64+0xb0/0x150 arch/x86/entry/common.c:386
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 34e2ab57a9 ("RDMA/ucma: Extend ucma_connect to receive ECE parameters")
Fixes: 0cb15372a6 ("RDMA/cma: Connect ECE to rdma_accept")
Link: https://lore.kernel.org/r/0-v1-d5b86dab17dc+28c25-ucma_syz_min_jgg@nvidia.com
Reported-by: syzbot+086ab5ca9eafd2379aa6@syzkaller.appspotmail.com
Reported-by: syzbot+7446526858b83c8828b2@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Recent kernels have been reported to panic using the bochs_drm
framebuffer under qemu-system-sparc64 which was bisected to
commit 7a0483ac4f ("drm/bochs: switch to generic drm fbdev emulation").
The backtrace indicates that the shadow framebuffer copy in
drm_fb_helper_dirty_blit_real() is trying to access the real
framebuffer using a virtual address rather than use an IO access
typically implemented using a physical (ASI_PHYS) access on SPARC.
The fix is to replace the memcpy with memcpy_toio() from io.h.
memcpy_toio() uses writeb() where the original fbdev code
used sbus_memcpy_toio(). The latter uses sbus_writeb().
The difference between writeb() and sbus_memcpy_toio() is
that writeb() writes bytes in little-endian, where sbus_writeb() writes
bytes in big-endian. As endian does not matter for byte writes they are
the same. So we can safely use memcpy_toio() here.
Note that this only fixes bochs, in general fbdev helpers still have
issues with mixing up system memory and __iomem space. Fixing that will
require a lot more work.
v3:
- Improved changelog (Daniel)
- Added FIXME to fbdev_use_iomem (Daniel)
v2:
- Added missing __iomem cast (kernel test robot)
- Made changelog readable and fix typos (Mark)
- Add flag to select iomem - and set it in the bochs driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org
Commit 1b79c52844 ("PCI: cadence: Add host driver for Cadence PCIe
controller") in order to update Vendor ID, directly wrote to
PCI_VENDOR_ID register. However PCI_VENDOR_ID in root port configuration
space is read-only register and writing to it will have no effect.
Use local management register to configure Vendor ID and Subsystem Vendor
ID.
Link: https://lore.kernel.org/r/20200722110317.4744-10-kishon@ti.com
Fixes: 1b79c52844 ("PCI: cadence: Add host driver for Cadence PCIe controller")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cadence driver uses "mem" memory resource to obtain the offset of
configuration space address region, memory space address region and
message space address region. The obtained offset is used to program
the Address Translation Unit (ATU). However certain platforms like TI's
J721E SoC require the absolute address to be programmed in the ATU and
not just the offset. Add new *ops* for CPU addr fixup for the platform
drivers to provide the correct address to be programmed in the ATU.
Link: https://lore.kernel.org/r/20200722110317.4744-9-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
"mem" is not a memory resource and it overlaps with PCIe config space
and memory region. Remove "mem" from reg binding.
Link: https://lore.kernel.org/r/20200722110317.4744-8-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Certain platforms like TI's J721E allows only 32-bit configuration
space access. In such cases pci_generic_config_read and
pci_generic_config_write cannot be used. Add support in Cadence core
to let pci_host_bridge have custom pci_ops.
Link: https://lore.kernel.org/r/20200722110317.4744-7-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add cdns_pcie_ops to start link and verify link status. The registers
to start link and to check link status is in Platform specific PCIe
wrapper. Add support for platform specific drivers to add callback
functions for the PCIe Cadence core to start link and verify link status.
Link: https://lore.kernel.org/r/20200722110317.4744-6-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Certain platforms like TI's J721E using Cadence PCIe IP can perform only
32-bit accesses for reading or writing to Cadence registers. Convert all
read and write accesses to 32-bit in Cadence PCIe driver in preparation
for adding PCIe support in TI's J721E SoC.
Also add spin lock to disable interrupts while modifying PCI_STATUS
register while raising legacy interrupt since PCI_STATUS is accessible
by both remote RC and EP and time between read and write should be
minimized.
Link: https://lore.kernel.org/r/20200722110317.4744-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add a macro for aligning down a pointer. This is useful to get an
aligned register address when a device allows only word access and
doesn't allow half word or byte access.
Link: https://lore.kernel.org/r/20200722110317.4744-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
commit bd22885aa1 ("PCI: cadence: Refactor driver to use as a core
library") while refactoring the Cadence PCIe driver to be used as
library, removed pm_runtime_get_sync() from cdns_pcie_ep_setup()
and cdns_pcie_host_setup() but missed to remove the corresponding
pm_runtime_put_sync() in the error path. Fix it here.
Link: https://lore.kernel.org/r/20200722110317.4744-3-kishon@ti.com
Fixes: bd22885aa1 ("PCI: cadence: Refactor driver to use as a core library")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
