As reported in https://bugzilla.kernel.org/206217 , raw_violation_fixup
is causing more harm than good in some common use-cases.
This patch is a partial revert of commit:
191cd6fb5d ("PCI: tegra: Add SW fixup for RAW violations")
and fixes the following regression since then.
* Description:
When both the NIC and MMC are used one can see the following message:
NETDEV WATCHDOG: enp1s0 (r8169): transmit queue 0 timed out
and
pcieport 0000:00:02.0: AER: Uncorrected (Non-Fatal) error received: 0000:01:00.0
r8169 0000:01:00.0: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
r8169 0000:01:00.0: AER: device [10ec:8168] error status/mask=00004000/00400000
r8169 0000:01:00.0: AER: [14] CmpltTO (First)
r8169 0000:01:00.0: AER: can't recover (no error_detected callback)
pcieport 0000:00:02.0: AER: device recovery failed
After that, the ethernet NIC is not functional anymore even after
reloading the r8169 module. After a reboot, this is reproducible by
copying a large file over the NIC to the MMC.
For some reason this is not reproducible when files are copied to a tmpfs.
* Little background on the fixup, by Manikanta Maddireddy:
"In the internal testing with dGPU on Tegra124, CmplTO is reported by
dGPU. This happened because FIFO queue in AFI(AXI to PCIe) module
get full by upstream posted writes. Back to back upstream writes
interleaved with infrequent reads, triggers RAW violation and CmpltTO.
This is fixed by reducing the posted write credits and by changing
updateFC timer frequency. These settings are fixed after stress test.
In the current case, RTL NIC is also reporting CmplTO. These settings
seems to be aggravating the issue instead of fixing it."
Link: https://lore.kernel.org/r/20200718100710.15398-1-kwizart@gmail.com
Fixes: 191cd6fb5d ("PCI: tegra: Add SW fixup for RAW violations")
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Cc: stable@vger.kernel.org
To get the changes in the commit:
"perf: Add perf_event_mmap_page::cap_user_time_short ABI"
This update is a prerequisite to add support for short clock counters
related ABI extension.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200716051130.4359-8-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
This completes the ARM64 cap_user_time support.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200716051130.4359-7-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to support short clock counters, provide an ABI extension.
As a whole:
u64 time, delta, cyc = read_cycle_counter();
+ if (cap_user_time_short)
+ cyc = time_cycle + ((cyc - time_cycle) & time_mask);
delta = mul_u64_u32_shr(cyc, time_mult, time_shift);
if (cap_user_time_zero)
time = time_zero + delta;
delta += time_offset;
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200716051130.4359-6-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
When sched_clock is running on anything other than arch_timer, don't
advertise cap_user_time*.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200716051130.4359-5-leo.yan@linaro.org
Requested-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
As reported by Leo; the existing implementation is broken when the
clock and counter don't intersect at 0.
Use the sched_clock's struct clock_read_data information to correctly
implement cap_user_time and cap_user_time_zero.
Note that the ARM64 counter is architecturally only guaranteed to be
56bit wide (implementations are allowed to be wider) and the existing
perf ABI cannot deal with wrap-around.
This implementation should also be faster than the old; seeing how we
don't need to recompute mult and shift all the time.
[leoyan: Use mul_u64_u32_shr() to convert cyc to ns to avoid overflow]
Reported-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200716051130.4359-4-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
sched_clock uses seqcount_t latching to switch between two storage
places protected by the sequence counter. This allows it to have
interruptible, NMI-safe, seqcount_t write side critical sections.
Since 7fc26327b7 ("seqlock: Introduce raw_read_seqcount_latch()"),
raw_read_seqcount_latch() became the standardized way for seqcount_t
latch read paths. Due to the dependent load, it also has one read
memory barrier less than the currently used raw_read_seqcount() API.
Use raw_read_seqcount_latch() for the seqcount_t latch read path.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lkml.kernel.org/r/20200625085745.GD117543@hirez.programming.kicks-ass.net
Link: https://lkml.kernel.org/r/20200715092345.GA231464@debian-buster-darwi.lab.linutronix.de
Link: https://lore.kernel.org/r/20200716051130.4359-3-leo.yan@linaro.org
References: 1809bfa44e ("timers, sched/clock: Avoid deadlock during read from NMI")
Signed-off-by: Will Deacon <will@kernel.org>
In order to support perf_event_mmap_page::cap_time features, an
architecture needs, aside from a userspace readable counter register,
to expose the exact clock data so that userspace can convert the
counter register into a correct timestamp.
Provide struct clock_read_data and two (seqcount) helpers so that
architectures (arm64 in specific) can expose the numbers to userspace.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20200716051130.4359-2-leo.yan@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When PMU event ID is equal or greater than 0x4000, it will be reduced
by 0x4000 and it is not the raw number in the sysfs. Let's correct it
and obtain the raw event ID.
Before this patch:
cat /sys/bus/event_source/devices/armv8_pmuv3_0/events/sample_feed
event=0x001
After this patch:
cat /sys/bus/event_source/devices/armv8_pmuv3_0/events/sample_feed
event=0x4001
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1592487344-30555-3-git-send-email-zhangshaokun@hisilicon.com
[will: fixed formatting of 'if' condition]
Signed-off-by: Will Deacon <will@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719203714.61745-1-grandmaster@al2klimov.de
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719171428.60470-1-grandmaster@al2klimov.de
The SADC component in JZ47xx SoCs provides support for touchscreen
operations (pen position and pen down pressure) in single-ended and
differential modes.
The touchscreen component of SADC takes a significant time to stabilize
after first receiving the clock and a delay of 50ms has been empirically
proven to be a safe value before data sampling can begin.
Of the known hardware to use this controller, GCW Zero and Anbernic RG-350
utilize the touchscreen mode by having their joystick(s) attached to the
X/Y positive/negative input pins.
JZ4770 and later SoCs introduce a low-level command feature. With it, up
to 32 commands can be programmed, each one corresponding to a sampling
job. It allows to change the low-voltage reference, the high-voltage
reference, have them connected to VCC, GND, or one of the X-/X+ or Y-/Y+
pins.
This patch introduces support for 6 stream-capable channels:
- channel #0 samples X+/GND
- channel #1 samples Y+/GND
- channel #2 samples X-/GND
- channel #3 samples Y-/GND
- channel #4 samples X+/X-
- channel #5 samples Y+/Y-
Being able to sample X-/GND and Y-/GND is useful on some devices, where
one joystick is connected to the X+/Y+ pins, and a second joystick is
connected to the X-/Y- pins.
All the boards which probe this driver have the interrupt provided from
Device Tree, with no need to handle a case where the IRQ was not provided.
Co-developed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce support for touchscreen channels found in JZ47xx SoCs.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There are no external users of of_find_backlight, as they have all
changed to use the managed version. Make of_find_backlight static to
prevent new external users.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There are no external users of backlight_put(). Drop it and open code
the two users in backlight.c.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Introduce the backlight_get_brightness() helper in all
video/backlight/* drivers. This simplifies the code and align the
implementation of the update_status() operation across the different
backlight drivers.
Some of the drivers gains a little extra functionality by the change
as they now respect the fb_blank() ioctl.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use the backlight_is_blank() helper to simplify the code a bit.
The jornada720_bl driver distinguish between backlight off
and brightness set to 0.
Thus this driver turn off backlight only when backlight_is_blank()
returns true.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Introduce the use of backlight_get_brightness() to simplify the
update_status() operation. With the simpler implementation drop the
gpio_backlight_get_next_brightness() helper as it was now a
one-liner.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
cr_bllcd can turn backlight ON or OFF.
Fix semantitics so they equals what we know from gpio-backlight.
brightness == 0 => backlight off
brightness == 1 => backlight on
Use the backlight_get_brightness() helper to simplify the code.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Replaces the open-coded checks of the state, with the
backlight_get_brightness() helper. This increases readability of the
code and align the functionality across the drivers.
Furthermore drop the debug prints in update_status().
If we need debug printing then we can add it to the backlight core.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Based on an idea from Emil Velikov, add a helper that checks
backlight_is_blank() and return 0 as brightness if display is blank or
the property value if not.
This allows us to simplify the update_status() implementation
in most of the backlight drivers.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Instead of having one array of struct iio_chan_spec for all SoCs, and
have some SoCs remove the last item of the array as they can't use it,
have each SoC define its array of supported channels.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Include backlight so the documentation is now generated with make
htmldocs and friends.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add overview chapter to backlight.c.
Update existing kernel-doc to follow a more consistent style and drop
kernel-doc for deprecated functions.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
No need to put "extern" in front of prototypes. While touching the
prototypes adjust indent to follow the kernel style.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The backlight_bl driver required initialization using
struct generic_bl_info. As there are no more references
to this struct there is no users left.
So it is safe to delete the driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add kernel-doc documentation for the backlight enums
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add documentation for the inline functions in backlight.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Improve the documentation for backlight_device and adapt it to
kernel-doc style.
The updated documentation is more strict on how locking is used.
With the update neither update_lock nor ops_lock may be used
outside the backlight core.
This restriction was introduced to keep the locking simple
by keeping it in the core.
It was verified that this documents the current state by renaming
update_lock => bl_update_lock and ops_lock => bl_ops_lock.
The rename did not reveal any uses outside the backlight core.
The rename is NOT part of this patch.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Provide an of_xlate callback in order to retrieve the correct channel
specifier index from the IIO channels array.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce error checks for the clk_enable calls used in this driver.
As part of the changes, move clk_enable/clk_disable calls out of
ingenic_adc_set_config and into respective logic of its callers.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Improve the documentation for backlight_properties and adapt it to
kernel-doc style.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Improve the documentation for backlight_ops and adapt it to kernel-doc
style.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The backlight support has three properties that express the state:
- power
- state
- fb_blank
It is un-documented and easy to get wrong.
Add backlight_is_blank() helper to make it simpler
for drivers to get the check of the state correct.
A lot of drivers also includes checks for fb_blank.
This check is redundant when the state is checked
and thus not needed in this helper function.
But added anyway to avoid introducing subtle bugs
due to the creative use of fb_blank in some drivers.
Introducing this helper will for some drivers results in
added support for fb_blank. This will be a change in
functionality, which will improve the backlight driver.
Rolling out this helper to all relevant backlight drivers
will eliminate almost all accesses to fb_blank.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Increase readability of fb_notifier_callback() by removing
a few indent levels.
No functional change.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Since commit bcf3440c6d ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY"), networking is broken on sama5d3 xplained.
The device tree has phy-mode = "rgmii" and this worked before, because
KSZ9031 PHY started with default RGMII internal delays configuration (TX
off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
result networking is become broken.
Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
behavior.
Fixes: bcf3440c6d ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200717233644.841080-1-alexandre.belloni@bootlin.com
kernel test robot reports a compile warning about REG_OFFSET redefined
in the reset-intel-gw.c after merging commit e44ab4e14d ("regmap:
Simplify implementation of the regmap_read_poll_timeout() macro"). the
warning is like that:
drivers/reset/reset-intel-gw.c:18:0: warning: "REG_OFFSET" redefined
#define REG_OFFSET GENMASK(31, 16)
In file included from ./arch/arm/mach-ixp4xx/include/mach/hardware.h:30:0,
from ./arch/arm/mach-ixp4xx/include/mach/io.h:15,
from ./arch/arm/include/asm/io.h:198,
from ./include/linux/io.h:13,
from ./include/linux/iopoll.h:14,
from ./include/linux/regmap.h:20,
from drivers/reset/reset-intel-gw.c:12:
./arch/arm/mach-ixp4xx/include/mach/platform.h:25:0: note: this is the location of the previous definition
#define REG_OFFSET 3
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c9aef213e3 ("reset: intel: Add system reset controller driver")
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Count pages after possibly truncating the iterator to the maximum zone
append size, not before.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Avoid the compilation warning "Variable 'ret' is reassigned a value
before the old one has been used." in zonefs_create_zgroup() by setting
ret for the error path only if an error happens.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
This is a s390 port of x86 commit 3dec541b2e ("bpf: Add support for BTF
pointers to x86 JIT").
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This is a s390 port of commit 548acf1923 ("x86/mm: Expand the
exception table logic to allow new handling options"), which is needed
for implementing BPF_PROBE_MEM on s390.
The new handler field is made 64-bit in order to allow pointing from
dynamically allocated entries to handlers in kernel text. Unlike on x86,
NULL is used instead of ex_handler_default. This is because exception
tables are used by boot/text_dma.S, and it would be a pain to preserve
ex_handler_default.
The new infrastructure is ignored in early_pgm_check_handler, since
there is no pt_regs.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Replace three implementations with one using using __stringify_in_c
macro conveniently "borrowed" from powerpc and microblaze.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Get rid of FORCE_MAX_ZONEORDER which limited allocations to order 8 (= 1MB)
and use the default, which allows for order 10 (= 4MB) allocations.
Given that s390 allows less than the default this caused some memory
allocation problems more or less unique to s390 from time to time.
Note: this was originally introduced with commit 684de39bd7 ("[S390]
Fix IPL from NSS.") in order to support Named Saved Segments, which
could start/end at an arbitrary 1 megabyte boundary and also before
support for sparsemem vmemmmap was enabled.
Since NSS support is gone, but sparsemem vmemmap support is available
this limitation can go away.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Trimming to MAX_ORDER was originally done in order to avoid to set
HOLES_IN_ZONE, which in turn would enable a quite expensive
pfn_valid() check. pfn_valid() however only checks if a struct page
exists for a given pfn.
With sparsemen vmemmap there are always struct pages, since memmaps
are allocated for whole sections. Therefore remove the HOLES_IN_ZONE
comment and the trimming.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
For non-thinint devices in LPAR, qdio polls an idle Input Queue for a
little while to catch more work. But platform support for thinints has
been around practically _forever_ by now, so this micro-optimization is
seeing 0 actual use. Remove it to reduce the overall complexity of the
hot path.
In the meantime we also grew support for driver-level polling
(eg. NAPI in qeth), so it's quite questionable how useful this would
actually be on current kernels.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
