The sama5d2 TC block TIMER_CLOCK1 is different from the at91sam9x5 one.
Instead of being MCK / 2, it is the TCB GCLK.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200710230813.1005150-3-alexandre.belloni@bootlin.com
Convert Atmel Timer Counter Blocks bindings to DT schema format using
json-schema.
Also move it out of mfd as it is not and has never been related to mfd.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200710230813.1005150-2-alexandre.belloni@bootlin.com
The HSDK pll driver uses the devm_ioremap_resource function, but does
not specify a dependency on IOMEM in Kconfig. This causes a build
failure on architectures without IOMEM, for example, UML (notably with
make allyesconfig).
Fix this by making CONFIG_CLK_HSDK depend on CONFIG_IOMEM.
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20200630043214.1080961-1-davidgow@google.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add rpm smd clocks, PMIC and bus clocks which are required on MSM8992,
MSM8994 (and APQ variants) for clients to vote on.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623230018.303776-1-konradybcio@gmail.com
[sboyd@kernel.org: Fixed up binding numbers]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The EMMC clock can be derived from either the HPLL or the MPLL. Register
a clock mux so that the rate is calculated correctly based upon the
parent.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200709195706.12741-2-eajames@linux.ibm.com
Acked-by: Joel Stanley <joel@jms.id.au>
Fixes: d3d04f6c33 ("clk: Add support for AST2600 SoC")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When building arm32 allmodconfig:
ld.lld: error: undefined symbol: ap_cp_unique_name
>>> referenced by ap-cpu-clk.c
>>> clk/mvebu/ap-cpu-clk.o:(ap_cpu_clock_probe) in archive drivers/built-in.a
ap_cp_unique_name is only compiled into the kernel image when
CONFIG_ARMADA_AP_CP_HELPER is selected (as it is not user selectable).
However, CONFIG_ARMADA_AP_CPU_CLK does not select it.
This has been a problem since the driver was added to the kernel but it
was not built before commit c318ea261749 ("cpufreq: ap806: fix cpufreq
driver needs ap cpu clk") so it was never noticed.
Fixes: f756e362d9 ("clk: mvebu: add CPU clock driver for Armada 7K/8K")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200701201128.2448427-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The patch adds ftm_alarm0 DT node for LS1028ARDB board
FlexTimer1 module is used to wakeup the system
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The patch adds ftm_alarm0 DT node for Soc LX2160A
FlexTimer1 module is used to wakeup the system in deep sleep
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The audio codec on the GW551x routes to ssi1. It fixes audio capture on
the device.
Cc: stable@vger.kernel.org
Fixes: 3117e851ce ("ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device tree node for first flash (CS0) connected
to all dspi controller.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch adds support for headset mic to the ASUS ROG Zephyrus
G14(GA401) notebook series by adding the corresponding
vendor/pci_device id, as well as adding a new fixup for the used
realtek ALC289. The fixup stets the correct pin to get the headset mic
correctly recognized on audio-jack.
Signed-off-by: Armas Spann <zappel@retarded.farm>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200711110557.18681-1-zappel@retarded.farm
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS platform couldn't need to use Headset Mode model.
It changes to the suitable model.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/d05bcff170784ec7bb35023407148161@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix a (COMPILE_TEST) build error when CONFIG_OF is not set/enabled
by adding a stub for of_get_next_parent().
../drivers/soc/qcom/qcom-geni-se.c:819:11: error: implicit declaration of function 'of_get_next_parent'; did you mean 'of_get_parent'? [-Werror=implicit-function-declaration]
../drivers/soc/qcom/qcom-geni-se.c:819:9: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
Fixes: 048eb908a1 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/ce0d7561-ff93-d267-b57a-6505014c728c@infradead.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fix key ring search permissions to address a regression from -rc1.
-----BEGIN PGP SIGNATURE-----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=V4cU
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"A one-line Fix for key ring search permissions to address a regression
from -rc1"
* tag 'libnvdimm-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: Fix key lookup permissions
-----BEGIN PGP SIGNATURE-----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=c1VA
-----END PGP SIGNATURE-----
Merge tag '5.8-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four cifs/smb3 fixes: the three for stable fix problems found recently
with change notification including a reference count leak"
* tag '5.8-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
cifs: fix reference leak for tlink
smb3: fix unneeded error message on change notify
cifs: remove the retry in cifs_poxis_lock_set
smb3: fix access denied on change notify request to some servers
-----BEGIN PGP SIGNATURE-----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=sJXD
-----END PGP SIGNATURE-----
Merge tag 'inclusive-terminology' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux
Pull coding style terminology documentation from Dan Williams:
"The discussion has tapered off as well as the incoming ack, review,
and sign-off tags. I did not see a reason to wait for the next merge
window"
* tag 'inclusive-terminology' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
CodingStyle: Inclusive Terminology
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
* clk-renesas:
clk: renesas: rzg2: Mark RWDT clocks as critical
clk: renesas: rcar-gen3: Mark RWDT clocks as critical
clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot
dt-bindings: clock: renesas: cpg: Convert to json-schema
- One more conversion of DT bindings to json-schema,
- Enhance critical clock handling to only consider clocks that were
enabled at boot time, and use it for watchdog clock handling on
R-Car Gen3 and RZ/G2 SoCs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXv8dgQAKCRCKwlD9ZEnx
cJhJAQDg6p5FuYp9hv0AGI90uRXWGjqOXjQLO/qmxs55M9ea+wEAoR7cMe9d1qWg
oxA06Kh0aBJsLZpkHPZCz0VfljBjnQ4=
=jHEQ
-----END PGP SIGNATURE-----
Merge tag 'clk-renesas-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull Renesas clk driver updates from Geert Uytterhoeven:
- One more conversion of DT bindings to json-schema
- Enhance critical clock handling to only consider clocks that were
enabled at boot time, and use it for watchdog clock handling on
R-Car Gen3 and RZ/G2 SoCs
* tag 'clk-renesas-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: rzg2: Mark RWDT clocks as critical
clk: renesas: rcar-gen3: Mark RWDT clocks as critical
clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot
dt-bindings: clock: renesas: cpg: Convert to json-schema
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200703175114.15027-1-grandmaster@al2klimov.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Enable CPU clks on Qualcomm MSM8996 SoCs
* clk-qcom:
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: qcom: Fix return value check in apss_ipq6018_probe()
Each of the CPU clusters (Power and Perf) on msm8996 are
clocked via 2 PLLs, a primary and alternate. There are also
2 Mux'es, a primary and secondary all connected together
as shown below
+-------+
XO | |
+------------------>0 |
| |
PLL/2 | SMUX +----+
+------->1 | |
| | | |
| +-------+ | +-------+
| +---->0 |
| | |
+---------------+ | +----------->1 | CPU clk
|Primary PLL +----+ PLL_EARLY | | +------>
| +------+-----------+ +------>2 PMUX |
+---------------+ | | | |
| +------+ | +-->3 |
+--^+ ACD +-----+ | +-------+
+---------------+ +------+ |
|Alt PLL | |
| +---------------------------+
+---------------+ PLL_EARLY
The primary PLL is what drives the CPU clk, except for times
when we are reprogramming the PLL itself (for rate changes) when
we temporarily switch to an alternate PLL. A subsequent patch adds
support to switch between primary and alternate PLL during rate
changes.
The primary PLL operates on a single VCO range, between 600MHz
and 3GHz. However the CPUs do support OPPs with frequencies
between 300MHz and 600MHz. In order to support running the CPUs
at those frequencies we end up having to lock the PLL at twice
the rate and drive the CPU clk via the PLL/2 output and SMUX.
So for frequencies above 600MHz we follow the following path
Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk
and for frequencies between 300MHz and 600MHz we follow
Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk
ACD stands for Adaptive Clock Distribution and is used to
detect voltage droops.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Rajendra Nayak: Initial RFC - https://lkml.org/lkml/2016/9/29/84
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Ilia Lin: - reworked clock registering
- Added clock-tree diagram
- non-builtin support
- clock notifier on rate change
- https://lkml.org/lkml/2018/5/24/123
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Loic Poulain: - fixed driver remove / clk deregistering
- Removed useless memory barriers
- devm usage when possible
- Fixed Kconfig depends
Link: https://lore.kernel.org/r/1593766185-16346-3-git-send-email-loic.poulain@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Each of the CPU clusters (Power and Perf) on msm8996 are
clocked via 2 PLLs, a primary and alternate. There are also
2 Mux'es, a primary and secondary all connected together
as shown below
+-------+
XO | |
+------------------>0 |
| |
PLL/2 | SMUX +----+
+------->1 | |
| | | |
| +-------+ | +-------+
| +---->0 |
| | |
+---------------+ | +----------->1 | CPU clk
|Primary PLL +----+ PLL_EARLY | | +------>
| +------+-----------+ +------>2 PMUX |
+---------------+ | | | |
| +------+ | +-->3 |
+--^+ ACD +-----+ | +-------+
+---------------+ +------+ |
|Alt PLL | |
| +---------------------------+
+---------------+ PLL_EARLY
The primary PLL is what drives the CPU clk, except for times
when we are reprogramming the PLL itself (for rate changes) when
we temporarily switch to an alternate PLL. A subsequent patch adds
support to switch between primary and alternate PLL during rate
changes.
The primary PLL operates on a single VCO range, between 600MHz
and 3GHz. However the CPUs do support OPPs with frequencies
between 300MHz and 600MHz. In order to support running the CPUs
at those frequencies we end up having to lock the PLL at twice
the rate and drive the CPU clk via the PLL/2 output and SMUX.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1593766185-16346-4-git-send-email-loic.poulain@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver provides kernel level API for other drivers
to access the MSM8996 L2 cache registers.
Separating the L2 access code from the PMU driver and
making it public to allow other drivers use it.
The accesses must be separated with a single spinlock,
maintained in this driver.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Since the BPF_PROG_TYPE_CGROUP_SOCKOPT verifier test does not set an
attach type, bpf_prog_load_check_attach() disallows loading the program
and the test is always skipped:
#434/p perfevent for cgroup sockopt SKIP (unsupported program type 25)
Fix the issue by setting a valid attach type.
Fixes: 0456ea170c ("bpf: Enable more helpers for BPF_PROG_TYPE_CGROUP_{DEVICE,SYSCTL,SOCKOPT}")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200710150439.126627-1-jean-philippe@linaro.org
There should be no difference between -1 and other negative syscalls
while tracing.
Cc: Keno Fischer <keno@juliacomputing.com>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that the selftest harness has variants, use them to eliminate a
bunch of copy/paste duplication.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The FIXTURE*() macro kern-doc examples had the wrong names for the C code
examples associated with them. Fix those and clarify that FIXTURE_DATA()
usage should be avoided.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: 74bc7c97fa ("kselftest: add fixture variants")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The terminator for the mode 1 syscalls list was a 0, but that could be
a valid syscall number (e.g. x86_64 __NR_read). By luck, __NR_read was
listed first and the loop construct would not test it, so there was no
bug. However, this is fragile. Replace the terminator with -1 instead,
and make the variable name for mode 1 syscall lists more descriptive.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the define and provide support for the old command until it is no longer
needed for backward compatibility.
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
The user_trap_syscall() helper creates a filter with
SECCOMP_RET_USER_NOTIF. To avoid confusion with SECCOMP_RET_TRAP, rename
the helper to user_notif_syscall().
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The seccomp tests are a bit noisy without CONFIG_CHECKPOINT_RESTORE (due
to missing the kcmp() syscall). The seccomp tests are more accurate with
kcmp(), but it's not strictly required. Refactor the tests to use
alternatives (comparing fd numbers), and provide a central test for
kcmp() so there is a single SKIP instead of many. Continue to produce
warnings for the other tests, though.
Additionally adds some more bad flag EINVAL tests to the addfd selftest.
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The seccomp benchmark calibration loop did not need to take so long.
Instead, use a simple 1 second timeout and multiply up to target. It
does not need to be accurate.
Signed-off-by: Kees Cook <keescook@chromium.org>
As seccomp_benchmark tries to calibrate how many samples will take more
than 5 seconds to execute, it may end up picking up a number of samples
that take 10 (but up to 12) seconds. As the calibration will take double
that time, it takes around 20 seconds. Then, it executes the whole thing
again, and then once more, with some added overhead. So, the thing might
take more than 40 seconds, which is too close to the 45s timeout.
That is very dependent on the system where it's executed, so may not be
observed always, but it has been observed on x86 VMs. Using a 90s timeout
seems safe enough.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Link: https://lore.kernel.org/r/20200601123202.1183526-1-cascardo@canonical.com
Signed-off-by: Kees Cook <keescook@chromium.org>
It's useful to see how much (at a minimum) each filter adds to the
syscall overhead. Add additional calculations.
Signed-off-by: Kees Cook <keescook@chromium.org>
