Commit 2ad6691d98, which moved the modification of the status annotation
for a packet in the Tx buffer prior to the retransmission moved the state
clearance, but managed to lose the bit that set it to UNACK.
Consequently, if a retransmission occurs, the packet is accidentally
changed to the ACK state (ie. 0) by masking it off, which means that the
packet isn't counted towards the tally of newly-ACK'd packets if it gets
hard-ACK'd. This then prevents the congestion control algorithm from
recovering properly.
Fix by reinstating the change of state to UNACK.
Spotted by the generic/460 xfstest.
Fixes: 2ad6691d98 ("rxrpc: Fix race between incoming ACK parser and retransmitter")
Signed-off-by: David Howells <dhowells@redhat.com>
The handling of the receive window size (rwind) from a received ACK packet
is not correct. The rxrpc_input_ackinfo() function currently checks the
current Tx window size against the rwind from the ACK to see if it has
changed, but then limits the rwind size before storing it in the tx_winsize
member and, if it increased, wake up the transmitting process. This means
that if rwind > RXRPC_RXTX_BUFF_SIZE - 1, this path will always be
followed.
Fix this by limiting rwind before we compare it to tx_winsize.
The effect of this can be seen by enabling the rxrpc_rx_rwind_change
tracepoint.
Fixes: 702f2ac87a ("rxrpc: Wake up the transmitter if Rx window size increases on the peer")
Signed-off-by: David Howells <dhowells@redhat.com>
Using a AX88179 device (0b95:1790), I see two bytes of appended data on
every RX packet. For example, this 48-byte ping, using 0xff as a
payload byte:
04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64
0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500
0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8
0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000
0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff
0x0040: ffff ffff ffff ffff ffff ffff ffff ffff
0x0050: ffff ffff ffff ffff ffff ffff ffff ffff
0x0060: ffff 961f
Those last two bytes - 96 1f - aren't part of the original packet.
In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte
'alignment pseudo header' from the start of the packet, and sets the
length from a per-packet field populated by hardware. It looks like that
length field *includes* the 2-byte header; the current driver assumes
that it's excluded.
This change trims the 2-byte alignment header after we've set the packet
length, so the resulting packet length is correct. While we're moving
the comment around, this also fixes the spelling of 'pseudo'.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The trace symbol printer (__print_symbolic()) ignores symbols that map to
an empty string and prints the hex value instead.
Fix the symbol for rxrpc_cong_no_change to " -" instead of "" to avoid
this.
Fixes: b54a134a7d ("rxrpc: Fix handling of enums-to-string translation in tracing")
Signed-off-by: David Howells <dhowells@redhat.com>
Add rename the gpu busy percentage for consistency and
add the mem busy percentage documentation.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vega10 and previous asics use one interface, vega20 and newer
use another.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing code used the major version number of the DRM driver
instead of the device major number of the DRM subsystem for
validating access for a devices cgroup.
This meant that accesses allowed by the devices cgroup weren't
permitted and certain accesses denied by the devices cgroup were
permitted (if they matched the wrong major device number).
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Fixes: 6b855f7b83 ("drm/amdkfd: Check against device cgroup")
Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
clang static analysis reports an undefined return
security/selinux/ss/conditional.c:79:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
return s[0];
^~~~~~~~~~~
static int cond_evaluate_expr( ...
{
u32 i;
int s[COND_EXPR_MAXDEPTH];
for (i = 0; i < expr->len; i++)
...
return s[0];
When expr->len is 0, the loop which sets s[0] never runs.
So return -1 if the loop never runs.
Cc: stable@vger.kernel.org
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The L1 and L3 lines drive NMOS transistors that are OFF with a low level.
On the SAM9X60 EK board, if the pins corresponding to L1 and L3
have pull-ups enabled, there is an extra 2 x 30uA power consumption.
Use pull-downs for these 2 lines to remove the unnecessary power
consumption.
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200615095525.43414-2-codrin.ciubotariu@microchip.com
The R1 and R3 lines drive NMOS transistors that are OFF with a low level.
On the SAMA5D2 Xplained board, if the pins corresponding to R1 and R3
have pull-ups enabled, there is an extra 2 x 30uA power consumption.
Use pull-downs for these 2 lines to remove the unnecessary power
consumption.
Fixes: b133ca7a65 ("ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200615095525.43414-1-codrin.ciubotariu@microchip.com
The next use of the device will generate an underflow from the
stale reference.
Cc: Qian Cai <cai@lca.pw>
Fixes: 1518ac272e ("vfio/pci: fix memory leaks of eventfd ctx")
Reported-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
During build compiler reports some 'false positive' warnings about
variables {'seq_ops', 'filtered_pids', 'other_pids'} may be used
uninitialized. This patch silences these warnings.
Also delete some useless spaces
Link: https://lkml.kernel.org/r/20200529141214.37648-1-pilgrimtao@gmail.com
Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It is possible that a platform that is capable of 'namespace labels'
comes up without the labels properly initialized. In this case, the
region's 'align' attribute is hidden. Howerver, once the user does
initialize he labels, the 'align' attribute still stays hidden, which is
unexpected.
The sysfs_update_group() API is meant to address this, and could be
called during region probe, but it has entanglements with the device
'lockdep_mutex'. Therefore, simply make the 'align' attribute always
visible. It doesn't matter what it says for label-less namespaces, since
it is not possible to change their allocation anyway.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20200520225026.29426-1-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If we're doing polled IO and end up having requests being submitted
async, then completions can come in while we're waiting for refs to
drop. We need to reap these manually, as nobody else will be looking
for them.
Break the wait into 1/20th of a second time waits, and check for done
poll completions if we time out. Otherwise we can have done poll
completions sitting in ctx->poll_list, which needs us to reap them but
we're just waiting for them.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If both the tracer and the tracee are compat processes, and gprs[2]
is assigned a value by __poke_user_compat, then the higher 32 bits
of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and
syscall_get_error() always returns 0.
Fix the implementation by sign-extending the value for compat processes
the same way as x86 implementation does.
The bug was exposed to user space by commit 201766a20e ("ptrace: add
PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.
This change fixes strace syscall tampering on s390.
Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org
Fixes: 753c4dd6a2 ("[S390] ptrace changes")
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: stable@vger.kernel.org # v2.6.28+
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The way we produce SBALs to the device (first update q->nr_buf_used,
then update the SLSB) should ensure that we never see some of the
SLSB states when scanning the queue for progress.
So make some noise if we do, this implies a bug in our SBAL tracking.
Also tweak the WARN msg to provide more information.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This removes the last remaining accesses to ->qdio_data from internal
code. Just pass the qdio_irq struct where needed instead.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct audit_chunk {
...
struct node {
struct list_head list;
struct audit_tree *owner;
unsigned index; /* index; upper bit indicates 'will prune' */
} owners[];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
offsetof(struct audit_chunk, owners) + count * sizeof(struct node);
with:
struct_size(chunk, owners, count)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The FA2 mailbox is specified at 0x18025000 but should actually be
0x18025c00, length 0x400 according to socregs_nsp.h and board_bu.c. Also
the interrupt was off by one and should be GIC SPI 151 instead of 150.
Fixes: 17d5171723 ("ARM: dts: NSP: Add mailbox (PDC) to NSP")
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-17
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 158 insertions(+), 59 deletions(-).
The main changes are:
1) Important fix for bpf_probe_read_kernel_str() return value, from Andrii.
2) [gs]etsockopt fix for large optlen, from Stanislav.
3) devmap allocation fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Blindly adding an sof- prefix to the card name is not user friendly
and causes UCM issues with a driver name truncated to 16 characters.
Simplify to use "sof-bdw <codec_name>" pattern for all Broadwell
machine drivers. The sof- prefix is added by the core. A generic "SOF"
driver name is used, and UCMv2 will detect the configuration for this
driver by testing the card name.
Legacy uses are unmodified.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200617165616.18511-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Blindly adding an sof- prefix to the card name is not user friendly
and causes UCM issues with a driver name truncated to 16 characters.
Simplify to use "sof-bytcht <codec_name>" pattern for all cht* machine
drivers. The sof- prefix is added by the core. A generic "SOF" driver
name is used, and UCMv2 will detect the configuration for this driver
by testing the card name.
Legacy uses are unmodified.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617165616.18511-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Blindly adding an sof- prefix to the card name is not user friendly
and causes UCM issues with a driver name truncated to 16 characters.
Simplify to use "sof-bytcht <codec_name>" pattern for all byt* machine
drivers. The sof- prefix is added by the core. A generic "SOF" driver
name is used, and UCMv2 will detect the configuration for this driver
by testing the card name.
Legacy uses are unmodified.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200617165616.18511-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kmemleak throws error reports on module load/unload tests, add
snd_hdac_regmap_exit() in .remove().
While we are at it, also fix the error handling flow in .probe() to
use snd_hdac_regmap_exit() if needed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164144.17859-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Usually the DSP is not traditionally enabled on H skews but this might
be used moving forward.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164755.18104-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mirror ID added for legacy HDaudio
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164755.18104-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have two configurations for CometLake, and a third one
coming. On other platforms, we used a single Kconfig option, so we
should follow the same trend by merging the two cases in a backwards
compatible way.
The backwards compatibility is handled by overloading the COMETLAKE_LP
kconfig as COMETLAKE. In practice we've never seen a case where
COMETLAKE_H is not selected along with COMETLAKE_LP, so keeping one
of the two is enough.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200617164755.18104-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we're unlucky with timing, we could be running task_work after
having dropped the memory context in the sq thread. Since dropping
the context requires a runnable task state, we cannot reliably drop
it as part of our check-for-work loop in io_sq_thread(). Instead,
abstract out the mm acquire for the sq thread into a helper, and call
it from the async task work handler.
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_complete_rw_iopoll(), stores to io_kiocb's result and iopoll
completed are two independent store operations, to ensure that once
iopoll_completed is ture and then req->result must been perceived by
the cpu executing io_do_iopoll(), proper memory barrier should be used.
And in io_do_iopoll(), we check whether req->result is EAGAIN, if it is,
we'll need to issue this io request using io-wq again. In order to just
issue a single smp_rmb() on the completion side, move the re-submit work
to io_iopoll_complete().
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
[axboe: don't set ->iopoll_completed for -EAGAIN retry]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In IOPOLL mode, for EAGAIN error, we'll try to submit io request
again using io-wq, so don't fail rest of links if this io request
has links.
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Other drivers use lowercase hexadecimal literals, so convert the IQS620a
driver to do the same for consistency.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Because period and duty cycle are defined as ints with units of
nanoseconds, the maximum time duration that can be set is limited to
~2.147 seconds. Change their definitions to u64 in the structs of the
PWM framework so that higher durations may be set.
Also use the right format specifiers in debug prints in both core.c,
pwm-stm32-lp.c as well as video/fbdev/ssd1307fb.c.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since the PWM framework is switching struct pwm_args.period's datatype
to u64, prepare for this transition by using div64_u64() to handle a
64-bit divisor.
Also ensure that divide-by-zero (with fixed_rate as denominator) does
not happen with an explicit check with probe failure as a consequence.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since the PWM framework is switching struct pwm_state.period's datatype
to u64, prepare for this transition by using div_u64 to handle a 64-bit
dividend instead of a straight division operation.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since the PWM framework is switching struct pwm_state.period's datatype
to u64, prepare for this transition by using nsecs_to_jiffies() which
does away with the need for a division operation.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Since the PWM framework is switching struct pwm_args.period's datatype
to u64, prepare for this transition by using DIV64_U64_ROUND_CLOSEST to
handle a 64-bit divisor.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PWM framework is going to change the PWM period and duty cycles to
be 64-bit unsigned integers. To avoid build errors on platforms that do
not natively support 64-bit division, use explicity 64-bit division.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
- fixes for the SEV atomic pool (Geert Uytterhoeven and David Rientjes)
-----BEGIN PGP SIGNATURE-----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=uKpw
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fixes for the SEV atomic pool (Geert Uytterhoeven and David Rientjes)"
* tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: decouple DMA_REMAP from DMA_COHERENT_POOL
dma-pool: fix too large DMA pools on medium memory size systems
We are relying on the fact, that we can pass > sizeof(int) optvals
to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes).
In the BPF program we check that we can only touch PAGE_SIZE bytes,
but the real optlen is PAGE_SIZE * 2. In both cases, we override it to
some predefined value and trim the optlen.
Also, let's modify exiting IP_TOS usecase to test optlen=0 case
where BPF program just bypasses the data as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200617010416.93086-2-sdf@google.com
Attaching to these hooks can break iptables because its optval is
usually quite big, or at least bigger than the current PAGE_SIZE limit.
David also mentioned some SCTP options can be big (around 256k).
For such optvals we expose only the first PAGE_SIZE bytes to
the BPF program. BPF program has two options:
1. Set ctx->optlen to 0 to indicate that the BPF's optval
should be ignored and the kernel should use original userspace
value.
2. Set ctx->optlen to something that's smaller than the PAGE_SIZE.
v5:
* use ctx->optlen == 0 with trimmed buffer (Alexei Starovoitov)
* update the docs accordingly
v4:
* use temporary buffer to avoid optval == optval_end == NULL;
this removes the corner case in the verifier that might assume
non-zero PTR_TO_PACKET/PTR_TO_PACKET_END.
v3:
* don't increase the limit, bypass the argument
v2:
* proper comments formatting (Jakub Kicinski)
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Link: https://lore.kernel.org/bpf/20200617010416.93086-1-sdf@google.com
Syzkaller discovered that creating a hash of type devmap_hash with a large
number of entries can hit the memory allocator limit for allocating
contiguous memory regions. There's really no reason to use kmalloc_array()
directly in the devmap code, so just switch it to the existing
bpf_map_area_alloc() function that is used elsewhere.
Fixes: 6f9d451ab1 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616142829.114173-1-toke@redhat.com
In commit 34cc0b338a we only handled the frame_sz in convert_to_xdp_frame().
This patch will also handle frame_sz in xdp_convert_zc_to_xdp_frame().
Fixes: 34cc0b338a ("xdp: Xdp_frame add member frame_sz and handle in convert_to_xdp_frame")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616103518.2963410-1-liuhangbin@gmail.com
There is a header file inclusion loop between asm-generic/bug.h
and linux/kernel.h. This causes potential compile failurs depending
on the which file is included first. One way of breaking this loop
is to stop spinlock_types.h from including lockdep.h. This patch
splits lockdep.h into two files for this purpose.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/E1jlSJz-0003hE-8g@fornost.hmeau.com
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct dm_target_deps {
...
__u64 dev[0]; /* out */
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
