The blk_mq_all_tag_iter() is a void function, thus remove
the redundant 'return' statement in this function.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently need ptk/gtk wmi peer flags in wmi peer assoc cmd
are set based on the rsnie and wpaie of the bss from the bss list.
Since this bss list is not updated with current BSSID for AP mode,
we may not find bss from the bss list. Which results in ptk/gtk peer
flags are not set in the wmi peer assoc cmd. Due to this EAPOL frames
are going in data rates instead of management rates.
Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1591771841-25503-1-git-send-email-vnaralas@codeaurora.org
Add support for collecting and dumping the ring backpressure
stats via debugfs. Stats are dumped only if events are
received for the specific ring.
Below command can be used to obtain these stats as part of soc dp stats.
cat /sys/kernel/debug/ath11k/ipq8074/soc_dp_stats
Sample Output - When No stats available:
Backpressure Stats
==================
No Ring Backpressure stats received
Sample Output - When ring bp stats available for specific ring
Backpressure Stats
==================
Ring: REO2SW1_RING
count: 1
hp: 2
tp: 2
seen before: 4ms
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1591768308-32005-3-git-send-email-srirrama@codeaurora.org
Add support for dp tx error stats which logs tx failure reasons due
to ring full condition, etc. This stats is added in soc_dp_stats
which was earlier used as soc_rx_stats so that all dp related info
are logged in same file.
Below is an example usage,
root@OpenWrt:/# cat /sys/kernel/debug/ath11k/ipq8074/soc_dp_stats
SOC RX STATS:
err ring pkts: 0
Invalid RBM: 0
<snip>
SOC TX STATS:
Ring Full Failures:
ring0: 4
ring1: 3
ring2: 5
Misc Transmit Failures: 2
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1591768308-32005-2-git-send-email-srirrama@codeaurora.org
spectral scan control interface is exposed through debugfs eentry.
Relayfs is used to collect the spectral data. These interfaces are
similar to ath10k spectral.
spectral debugfs interfaces are below,
echo background > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl
echo trigger > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl
iw dev wlan0 scan
echo disable > /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan_ctl
cat /sys/kernel/debug/ieee80211/phy0/ath11k/spectral_scan0 > fft_samples.dump
Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1591688014-26441-2-git-send-email-periyasa@codeaurora.org
Add direct buffer ring (dbring) with helper API, which is used by the
spectral scan. Initialise the direct buffer ring based on the dma ring
capability, which get announced in the wmi service ready extended event.
This ring is slightly changed from data path rings. Compare to data path
ring this ring shares the hp and tp address to firmware though WMI commands.
Also the replenish buffer size is derived from firmware announcement.
driver receive indication through WMI event
WMI_PDEV_DMA_RING_BUF_RELEASE_EVENTID.
Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1591688014-26441-1-git-send-email-periyasa@codeaurora.org
This patchset fixes a memory allocation issue and removes a 100%
reproducible use-after-free report thrown by KASAN in automated module
removal tests across multiple platforms.
All the credit goes to Bard Liao for root-causing the issue. DAIs may
be registered at the same time as a component, or when the topology is
loaded. This two-step registration causes the memory for
topology-based DAIs to allocated last, and conversely to be released
first by devres, before the component is released and the DAIs removed
from the component DAI list with snd_soc_unregister_dais().
When we remove a component, by the time we walk through its dai list
to unregister all dais, the dais allocated by the topology have been
freed already by devres and the list is corrupted with pointers that
are no longer valid.
The suggestion is to add an explicit devm_ based registration for
topology-based dais, so that each dai is cleanly removed from the
component dai list in the release operation before devres releases the
allocated memory.
Pierre-Louis Bossart (2):
ASoC: soc-devres: add devm_snd_soc_register_dai()
ASoC: soc-topology: use devm_snd_soc_register_dai()
include/sound/soc.h | 4 ++++
sound/soc/soc-devres.c | 37 +++++++++++++++++++++++++++++++++++++
sound/soc/soc-topology.c | 3 +--
3 files changed, 42 insertions(+), 2 deletions(-)
--
2.20.1
Port commit 6d011d5057 ("ALSA: hda: Clear RIRB status before reading
WP") from legacy HDA driver to fix the get response timeout issue.
Current SOF driver does not suffer from this issue because sync write
is enabled in hda_init. The issue will come back if the sync write is
disabled for some reason.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1591959048-15813-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently both FE and BE dai-links are configured bi-directional,
However the DSP BE dais are only single directional,
so set the directions as supported by the BE dais.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support to q6afe_is_rx_port() to get direction
of DSP BE dai port, this is useful for setting dailink
directions correctly.
Fixes: c25e295cd7 (ASoC: qcom: Add support to parse common audio device nodes)
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200612123711.29130-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_dpcm_fe_runtime_update() is called for all dailinks, and we want
to first discard all back-ends, then deal with front-ends.
The existing code first reports an error with multi-cpu front-ends,
and that check needs to be moved after we know that we are dealing
with a front-end.
Fixes: 6e1276a5e6 ('ASoC: Return error if the function does not support multi-cpu')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/1970
Link: https://lore.kernel.org/r/20200612203507.25621-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to ideal rt5682 CCF, the root clk is mclk.
But in some platforms, mclk is not exported to CCF.
In this condition, rt5682_register_dai_clks will not be called.
This patch lets dai clks could be registered whether mclk exists or not.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1591938925-1070-5-git-send-email-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It costs expensive to change clock configuration for models of protocol
version 3. In current implementation, speculative strategy is used to
finish the operation; just waiting for 4 seconds. As long as I investigate,
when accepting and changing clock status actually, the device sends
notification with mask.
This commit uses wise way to wait for the notification after changing
sampling clock rate during 4 seconds.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200614141221.53527-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Platform drivers now have the option to have the platform core create
and remove any needed sysfs attribute files. So take advantage of that
and do not register "by hand" a sysfs file.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200517193655.3895087-2-emil.l.velikov@gmail.com
Currently the ret handling is all over the place - with two redundant
assignments and another one addressed earlier.
Use the exact same flow in both functions.
v2: straighten the code flow, instead of just removing the assignments
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-2-emil.l.velikov@gmail.com
The assignment to resp.response_length is never read since it is being
updated again on the next statement. The assignment is redundant so
removed it.
Fixes: a645a89d9a ("RDMA/mlx5: Return ECE DC support")
Link: https://lore.kernel.org/r/20200604143902.56021-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function always returns zero (success). Ideally we'll remove it all
together - although that's requires a little more work.
For now, we can drop the return type and simplify the drm core code
surrounding it.
v2: remove redundant assignment (Sam)
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-1-emil.l.velikov@gmail.com
For some reasons, running a simple qemu-kvm command with KCSAN will
reset AMD hosts. It turns out svm_vcpu_run() could not be instrumented.
Disable it for now.
# /usr/libexec/qemu-kvm -name ubuntu-18.04-server-cloudimg -cpu host
-smp 2 -m 2G -hda ubuntu-18.04-server-cloudimg.qcow2
=== console output ===
Kernel 5.6.0-next-20200408+ on an x86_64
hp-dl385g10-05 login:
<...host reset...>
HPE ProLiant System BIOS A40 v1.20 (03/09/2018)
(C) Copyright 1982-2018 Hewlett Packard Enterprise Development LP
Early system initialization, please wait...
Signed-off-by: Qian Cai <cai@lca.pw>
Message-Id: <20200415153709.1559-1-cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The registration of DAIs may be done at two distinct times, once
during a component registration and later when loading a
topology. Since devm_ managed resources are freed in the reverse order
they were allocated, when a component starts unregistering DAIs by
walking through the DAI list, the memory allocated for the
topology-registered DAIs was freed already, which leads to 100%
reproducible KASAN use-after-free reports.
This patch suggests a new devm_ function to force the DAI list to be
updated prior to freeing the memory chunks referenced by the list
pointers.
Suggested-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/2186
Link: https://lore.kernel.org/r/20200612205938.26415-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
Lastly, make use of the sizeof_field() helper instead of an open-coded
version.
This issue was found with the help of Coccinelle and audited _manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200527171425.GA4053@embeddedor
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Applications that read EFI variables may see a return
value of -EINTR if they exceed the rate limit and a
signal delivery is attempted while the process is sleeping.
This is quite surprising to the application, which probably
doesn't have code to handle it.
Change the interruptible sleep to a non-interruptible one.
Reported-by: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20200528194905.690-3-tony.luck@intel.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Some applications want to be able to see when EFI variables
have been updated.
Update the modification time for successful writes.
Reported-by: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20200528194905.690-2-tony.luck@intel.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348" fixed a similar problem.
Fixes: 0bb549052d ("efi: Add esrt support")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200528183804.4497-1-wu000273@umn.edu
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
With CONFIG_DEBUG_VIRTUAL=y, we can hit a BUG() if we take a hard
lockup watchdog interrupt when in OPAL mode.
This happens in show_instructions() if the kernel takes the watchdog
NMI IPI, or any other interrupt, with MSR_IR == 0. show_instructions()
updates the variable pc in the loop and the second iteration will
result in BUG().
We hit the BUG_ON due the below check in __va()
#define __va(x)
({
VIRTUAL_BUG_ON((unsigned long)(x) >= PAGE_OFFSET);
(void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET);
})
Fix it by moving the check out of the loop. Also update nip so that
the nip == pc check still matches.
Fixes: 4dd7554a64 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use IS_ENABLED(), massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200524093822.423487-1-aneesh.kumar@linux.ibm.com
It is possible that the first event in the event log is not actually a
log header at all, but rather a normal event. This leads to the cast in
__calc_tpm2_event_size being an invalid conversion, which means that
the values read are effectively garbage. Depending on the first event's
contents, this leads either to apparently normal behaviour, a crash or
a freeze.
While this behaviour of the firmware is not in accordance with the
TCG Client EFI Specification, this happens on a Dell Precision 5510
with the TPM enabled but hidden from the OS ("TPM On" disabled, state
otherwise untouched). The EFI firmware claims that the TPM is present
and active and that it supports the TCG 2.0 event log format.
Fortunately, this can be worked around by simply checking the header
of the first event and the event log header signature itself.
Commit b4f1874c62 ("tpm: check event log version before reading final
events") addressed a similar issue also found on Dell models.
Fixes: 6b03261902 ("efi: Attempt to get the TCG2 event log in the boot stub")
Signed-off-by: Fabian Vogt <fvogt@suse.de>
Link: https://lore.kernel.org/r/1927248.evlx2EsYKh@linux-e202.suse.de
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1165773
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reinitialize IA32_FEAT_CTL on the BSP during wakeup to handle the case
where firmware doesn't initialize or save/restore across S3. This fixes
a bug where IA32_FEAT_CTL is left uninitialized and results in VMXON
taking a #GP due to VMX not being fully enabled, i.e. breaks KVM.
Use init_ia32_feat_ctl() to "restore" IA32_FEAT_CTL as it already deals
with the case where the MSR is locked, and because APs already redo
init_ia32_feat_ctl() during suspend by virtue of the SMP boot flow being
used to reinitialize APs upon wakeup. Do the call in the early wakeup
flow to avoid dependencies in the syscore_ops chain, e.g. simply adding
a resume hook is not guaranteed to work, as KVM does VMXON in its own
resume hook, kvm_resume(), when KVM has active guests.
Fixes: 21bd3467a5 ("KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR")
Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Cc: stable@vger.kernel.org # v5.6
Link: https://lkml.kernel.org/r/20200608174134.11157-1-sean.j.christopherson@intel.com
sve.rst describes a flag PR_SVE_SET_VL_INHERIT for the
PR_SVE_SET_VL prctl, but there is no flag of this name. The flag
is shared between the _GET and _SET calls, so the _SET prefix was
dropped, giving the name PR_SVE_VL_INHERIT in the headers.
Fix it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/1591808590-20210-2-git-send-email-Dave.Martin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
TEXT_OFFSET was recently changed to 0x0, in preparation for its removal
at a later stage, and a warning is emitted into the kernel log when the
bootloader appears to have failed to take the TEXT_OFFSET image header
value into account.
Ironically, this warning itself fails to take TEXT_OFFSET into account,
and compares the kernel image's alignment modulo 2M against a hardcoded
value of 0x0, and so the warning will trigger spuriously when TEXT_OFFSET
randomization is enabled.
Given the intent to get rid of TEXT_OFFSET entirely, let's fix this
oversight by just removing support for TEXT_OFFSET randomization.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200615101939.634391-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Ingo suggested that since the new sched_set_*() functions are
implemented using the 'nocheck' variants, they really shouldn't ever
fail, so remove the return value.
Cc: axboe@kernel.dk
Cc: daniel.lezcano@linaro.org
Cc: sudeep.holla@arm.com
Cc: airlied@redhat.com
Cc: broonie@kernel.org
Cc: paulmck@kernel.org
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Now that nothing (modular) still uses sched_setscheduler(), remove the
exports.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively no change.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively no change.
Cc: paulmck@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively no change.
Cc: paulmck@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively changes prio from 99 to 50.
Cc: paulmck@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively no change.
Cc: tglx@linutronix.de
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively changes prio from 99 to 50.
Cc: wim@linux-watchdog.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively no change.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively no change.
Cc: rafael.j.wysocki@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
In an attempt to take away sched_setscheduler() from modules, change
this into sched_set_normal(.nice = 19).
Cc: john.stultz@linaro.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively no change.
Cc: daniel.lezcano@linaro.org
Cc: rafael.j.wysocki@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
No effective change.
Cc: broonie@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
In this case, use fifo_low, because it only cares about being above
SCHED_NORMAL. Effectively no change in behaviour.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively changes from 99 to 50.
Cc: awalls@md.metrocast.net
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
