Commit graph

1,042,680 commits

Author SHA1 Message Date
Dave Chinner
19f4e7cc81 xfs: Fix CIL throttle hang when CIL space used going backwards
A hang with tasks stuck on the CIL hard throttle was reported and
largely diagnosed by Donald Buczek, who discovered that it was a
result of the CIL context space usage decrementing in committed
transactions once the hard throttle limit had been hit and processes
were already blocked.  This resulted in the CIL push not waking up
those waiters because the CIL context was no longer over the hard
throttle limit.

The surprising aspect of this was the CIL space usage going
backwards regularly enough to trigger this situation. Assumptions
had been made in design that the relogging process would only
increase the size of the objects in the CIL, and so that space would
only increase.

This change and commit message fixes the issue and documents the
result of an audit of the triggers that can cause the CIL space to
go backwards, how large the backwards steps tend to be, the
frequency in which they occur, and what the impact on the CIL
accounting code is.

Even though the CIL ctx->space_used can go backwards, it will only
do so if the log item is already logged to the CIL and contains a
space reservation for it's entire logged state. This is tracked by
the shadow buffer state on the log item. If the item is not
previously logged in the CIL it has no shadow buffer nor log vector,
and hence the entire size of the logged item copied to the log
vector is accounted to the CIL space usage. i.e.  it will always go
up in this case.

If the item has a log vector (i.e. already in the CIL) and the size
decreases, then the existing log vector will be overwritten and the
space usage will go down. This is the only condition where the space
usage reduces, and it can only occur when an item is already tracked
in the CIL. Hence we are safe from CIL space usage underruns as a
result of log items decreasing in size when they are relogged.

Typically this reduction in CIL usage occurs from metadata blocks
being free, such as when a btree block merge occurs or a directory
enter/xattr entry is removed and the da-tree is reduced in size.
This generally results in a reduction in size of around a single
block in the CIL, but also tends to increase the number of log
vectors because the parent and sibling nodes in the tree needs to be
updated when a btree block is removed. If a multi-level merge
occurs, then we see reduction in size of 2+ blocks, but again the
log vector count goes up.

The other vector is inode fork size changes, which only log the
current size of the fork and ignore the previously logged size when
the fork is relogged. Hence if we are removing items from the inode
fork (dir/xattr removal in shortform, extent record removal in
extent form, etc) the relogged size of the inode for can decrease.

No other log items can decrease in size either because they are a
fixed size (e.g. dquots) or they cannot be relogged (e.g. relogging
an intent actually creates a new intent log item and doesn't relog
the old item at all.) Hence the only two vectors for CIL context
size reduction are relogging inode forks and marking buffers active
in the CIL as stale.

Long story short: the majority of the code does the right thing and
handles the reduction in log item size correctly, and only the CIL
hard throttle implementation is problematic and needs fixing. This
patch makes that fix, as well as adds comments in the log item code
that result in items shrinking in size when they are relogged as a
clear reminder that this can and does happen frequently.

The throttle fix is based upon the change Donald proposed, though it
goes further to ensure that once the throttle is activated, it
captures all tasks until the CIL push issues a wakeup, regardless of
whether the CIL space used has gone back under the throttle
threshold.

This ensures that we prevent tasks reducing the CIL slightly under
the throttle threshold and then making more changes that push it
well over the throttle limit. This is acheived by checking if the
throttle wait queue is already active as a condition of throttling.
Hence once we start throttling, we continue to apply the throttle
until the CIL context push wakes everything on the wait queue.

We can use waitqueue_active() for the waitqueue manipulations and
checks as they are all done under the ctx->xc_push_lock. Hence the
waitqueue has external serialisation and we can safely peek inside
the wait queue without holding the internal waitqueue locks.

Many thanks to Donald for his diagnostic and analysis work to
isolate the cause of this hang.

Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-06-21 10:06:14 -07:00
Dave Chinner
eef983ffea xfs: journal IO cache flush reductions
Currently every journal IO is issued as REQ_PREFLUSH | REQ_FUA to
guarantee the ordering requirements the journal has w.r.t. metadata
writeback. THe two ordering constraints are:

1. we cannot overwrite metadata in the journal until we guarantee
that the dirty metadata has been written back in place and is
stable.

2. we cannot write back dirty metadata until it has been written to
the journal and guaranteed to be stable (and hence recoverable) in
the journal.

The ordering guarantees of #1 are provided by REQ_PREFLUSH. This
causes the journal IO to issue a cache flush and wait for it to
complete before issuing the write IO to the journal. Hence all
completed metadata IO is guaranteed to be stable before the journal
overwrites the old metadata.

The ordering guarantees of #2 are provided by the REQ_FUA, which
ensures the journal writes do not complete until they are on stable
storage. Hence by the time the last journal IO in a checkpoint
completes, we know that the entire checkpoint is on stable storage
and we can unpin the dirty metadata and allow it to be written back.

This is the mechanism by which ordering was first implemented in XFS
way back in 2002 by commit 95d97c36e5155075ba2eb22b17562cfcc53fcf96
("Add support for drive write cache flushing") in the xfs-archive
tree.

A lot has changed since then, most notably we now use delayed
logging to checkpoint the filesystem to the journal rather than
write each individual transaction to the journal. Cache flushes on
journal IO are necessary when individual transactions are wholly
contained within a single iclog. However, CIL checkpoints are single
transactions that typically span hundreds to thousands of individual
journal writes, and so the requirements for device cache flushing
have changed.

That is, the ordering rules I state above apply to ordering of
atomic transactions recorded in the journal, not to the journal IO
itself. Hence we need to ensure metadata is stable before we start
writing a new transaction to the journal (guarantee #1), and we need
to ensure the entire transaction is stable in the journal before we
start metadata writeback (guarantee #2).

Hence we only need a REQ_PREFLUSH on the journal IO that starts a
new journal transaction to provide #1, and it is not on any other
journal IO done within the context of that journal transaction.

The CIL checkpoint already issues a cache flush before it starts
writing to the log, so we no longer need the iclog IO to issue a
REQ_REFLUSH for us. Hence if XLOG_START_TRANS is passed
to xlog_write(), we no longer need to mark the first iclog in
the log write with REQ_PREFLUSH for this case. As an added bonus,
this ordering mechanism works for both internal and external logs,
meaning we can remove the explicit data device cache flushes from
the iclog write code when using external logs.

Given the new ordering semantics of commit records for the CIL, we
need iclogs containing commit records to issue a REQ_PREFLUSH. We
also require unmount records to do this. Hence for both
XLOG_COMMIT_TRANS and XLOG_UNMOUNT_TRANS xlog_write() calls we need
to mark the first iclog being written with REQ_PREFLUSH.

For both commit records and unmount records, we also want them
immediately on stable storage, so we want to also mark the iclogs
that contain these records to be marked REQ_FUA. That means if a
record is split across multiple iclogs, they are all marked REQ_FUA
and not just the last one so that when the transaction is completed
all the parts of the record are on stable storage.

And for external logs, unmount records need a pre-write data device
cache flush similar to the CIL checkpoint cache pre-flush as the
internal iclog write code does not do this implicitly anymore.

As an optimisation, when the commit record lands in the same iclog
as the journal transaction starts, we don't need to wait for
anything and can simply use REQ_FUA to provide guarantee #2.  This
means that for fsync() heavy workloads, the cache flush behaviour is
completely unchanged and there is no degradation in performance as a
result of optimise the multi-IO transaction case.

The most notable sign that there is less IO latency on my test
machine (nvme SSDs) is that the "noiclogs" rate has dropped
substantially. This metric indicates that the CIL push is blocking
in xlog_get_iclog_space() waiting for iclog IO completion to occur.
With 8 iclogs of 256kB, the rate is appoximately 1 noiclog event to
every 4 iclog writes. IOWs, every 4th call to xlog_get_iclog_space()
is blocking waiting for log IO. With the changes in this patch, this
drops to 1 noiclog event for every 100 iclog writes. Hence it is
clear that log IO is completing much faster than it was previously,
but it is also clear that for large iclog sizes, this isn't the
performance limiting factor on this hardware.

With smaller iclogs (32kB), however, there is a substantial
difference. With the cache flush modifications, the journal is now
running at over 4000 write IOPS, and the journal throughput is
largely identical to the 256kB iclogs and the noiclog event rate
stays low at about 1:50 iclog writes. The existing code tops out at
about 2500 IOPS as the number of cache flushes dominate performance
and latency. The noiclog event rate is about 1:4, and the
performance variance is quite large as the journal throughput can
fall to less than half the peak sustained rate when the cache flush
rate prevents metadata writeback from keeping up and the log runs
out of space and throttles reservations.

As a result:

	logbsize	fsmark create rate	rm -rf
before	32kb		152851+/-5.3e+04	5m28s
patched	32kb		221533+/-1.1e+04	5m24s

before	256kb		220239+/-6.2e+03	4m58s
patched	256kb		228286+/-9.2e+03	5m06s

The rm -rf times are included because I ran them, but the
differences are largely noise. This workload is largely metadata
read IO latency bound and the changes to the journal cache flushing
doesn't really make any noticable difference to behaviour apart from
a reduction in noiclog events from background CIL pushing.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-06-21 10:06:08 -07:00
Dave Chinner
3468bb1ca6 xfs: remove need_start_rec parameter from xlog_write()
The CIL push is the only call to xlog_write that sets this variable
to true. The other callers don't need a start rec, and they tell
xlog_write what to do by passing the type of ophdr they need written
in the flags field. The need_start_rec parameter essentially tells
xlog_write to to write an extra ophdr with a XLOG_START_TRANS type,
so get rid of the variable to do this and pass XLOG_START_TRANS as
the flag value into xlog_write() from the CIL push.

$ size fs/xfs/xfs_log.o*
  text	   data	    bss	    dec	    hex	filename
 27595	    560	      8	  28163	   6e03	fs/xfs/xfs_log.o.orig
 27454	    560	      8	  28022	   6d76	fs/xfs/xfs_log.o.patched

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-06-21 10:06:03 -07:00
Dave Chinner
bad77c375e xfs: CIL checkpoint flushes caches unconditionally
Currently every journal IO is issued as REQ_PREFLUSH | REQ_FUA to
guarantee the ordering requirements the journal has w.r.t. metadata
writeback. THe two ordering constraints are:

1. we cannot overwrite metadata in the journal until we guarantee
that the dirty metadata has been written back in place and is
stable.

2. we cannot write back dirty metadata until it has been written to
the journal and guaranteed to be stable (and hence recoverable) in
the journal.

These rules apply to the atomic transactions recorded in the
journal, not to the journal IO itself. Hence we need to ensure
metadata is stable before we start writing a new transaction to the
journal (guarantee #1), and we need to ensure the entire transaction
is stable in the journal before we start metadata writeback
(guarantee #2).

The ordering guarantees of #1 are currently provided by REQ_PREFLUSH
being added to every iclog IO. This causes the journal IO to issue a
cache flush and wait for it to complete before issuing the write IO
to the journal. Hence all completed metadata IO is guaranteed to be
stable before the journal overwrites the old metadata.

However, for long running CIL checkpoints that might do a thousand
journal IOs, we don't need every single one of these iclog IOs to
issue a cache flush - the cache flush done before the first iclog is
submitted is sufficient to cover the entire range in the log that
the checkpoint will overwrite because the CIL space reservation
guarantees the tail of the log (completed metadata) is already
beyond the range of the checkpoint write.

Hence we only need a full cache flush between closing off the CIL
checkpoint context (i.e. when the push switches it out) and issuing
the first journal IO. Rather than plumbing this through to the
journal IO, we can start this cache flush the moment the CIL context
is owned exclusively by the push worker. The cache flush can be in
progress while we process the CIL ready for writing, hence
reducing the latency of the initial iclog write. This is especially
true for large checkpoints, where we might have to process hundreds
of thousands of log vectors before we issue the first iclog write.
In these cases, it is likely the cache flush has already been
completed by the time we have built the CIL log vector chain.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-06-21 10:05:57 -07:00
Dave Chinner
0431d926b3 xfs: async blkdev cache flush
The new checkpoint cache flush mechanism requires us to issue an
unconditional cache flush before we start a new checkpoint. We don't
want to block for this if we can help it, and we have a fair chunk
of CPU work to do between starting the checkpoint and issuing the
first journal IO.

Hence it makes sense to amortise the latency cost of the cache flush
by issuing it asynchronously and then waiting for it only when we
need to issue the first IO in the transaction.

To do this, we need async cache flush primitives to submit the cache
flush bio and to wait on it. The block layer has no such primitives
for filesystems, so roll our own for the moment.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-06-21 10:05:51 -07:00
Dave Chinner
b5071ada51 xfs: remove xfs_blkdev_issue_flush
It's a one line wrapper around blkdev_issue_flush(). Just replace it
with direct calls to blkdev_issue_flush().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-06-21 10:05:46 -07:00
Marek Vasut
db8b7ca5b2
drm/bridge: ti-sn65dsi83: Replace connector format patching with atomic_get_input_bus_fmts
Patching the connector format is causing various problematic
side effects. Implement .atomic_get_input_bus_fmts callback
instead, which sets up the input (DSI-end) format, and that
format can then be used in pipeline format negotiation between
the DSI-end of this bridge and the other component closer to
the scanout engine.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620224208.184719-1-marex@denx.de
2021-06-21 19:04:19 +02:00
Sean Christopherson
ba1f82456b KVM: nVMX: Dynamically compute max VMCS index for vmcs12
Calculate the max VMCS index for vmcs12 by walking the array to find the
actual max index.  Hardcoding the index is prone to bitrot, and the
calculation is only done on KVM bringup (albeit on every CPU, but there
aren't _that_ many null entries in the array).

Fixes: 3c0f99366e ("KVM: nVMX: Add a TSC multiplier field in VMCS12")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210618214658.2700765-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-21 12:58:55 -04:00
Jim Mattson
5140bc7d6b KVM: VMX: Skip #PF(RSVD) intercepts when emulating smaller maxphyaddr
As part of smaller maxphyaddr emulation, kvm needs to intercept
present page faults to see if it needs to add the RSVD flag (bit 3) to
the error code. However, there is no need to intercept page faults
that already have the RSVD flag set. When setting up the page fault
intercept, add the RSVD flag into the #PF error code mask field (but
not the #PF error code match field) to skip the intercept when the
RSVD flag is already set.

Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210618235941.1041604-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-21 12:58:55 -04:00
Linus Torvalds
a96bfed64c ARM fixes for 5.13:
- fix gcc 10 compiler regression with cpu_init()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmDQtuEACgkQ9OeQG+St
 rGRQDxAAhrHvJSAERsTLehvG1RgklwWAOvIQUogILXucMwYBP2BiQxMCA8WMpyO/
 UM1ZWO08EMEwzILXdm5Fhi806lcRkbtr6IGzKJR01MtHctG2eywo0QJGTNZmt53j
 U2tQuNAuhTTd1N14eybZsAdgWmGCKgtBmhvW5alSoFB6jt94YQ8ZXcg+bzHvJ/i9
 8NdCleBv6oyLceMPW0j8iiMChKxxi/r267MVZUCu4VCc7geLU2Vf8buI5l8jbT5w
 8vR/tbHomlUwXfiCrBwmYE7YYt/dJMXUSMFPUpn+sj3c+gA28lfEPKNLe9JpI+r3
 Mow0usg8jJu0n8wyAc/AKnhLK/zBiB7Jcmj9Ue0Bf8h7cosSZt/OVfYzA+bBDMar
 v78/rQv9g4VcBtYjMvzkDBzGUGdvdDtGdl2ghJgYlNI6nVAf5bvIyMKkUUciFB7m
 6Jdy+EWIOSvqS72prpCh+2sSIS4tcCNiW0sPMhSeM5pu1VlCUTB8u6s5h8sp1+3h
 ZO4n5hcGO1lhTnJzLavufEeu5V6Kw33isKP5ZQ7L+s3cblzJuRmh0DVPqq0WI7bh
 mnP0BbcuVJANo+yrfQGos3XD4gZ19IWxSyu8ks0yJtFm2h+W1aXecrxQXk9t+EXh
 k+mWLAf00wEkaHvvGTuICswsj5aAKj0sLoIySXQPiFtZN1Nyn2I=
 =f79T
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fix from Russell King:

 - fix gcc 10 compiler regression with cpu_init()

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9081/1: fix gcc-10 thumb2-kernel regression
2021-06-21 09:49:48 -07:00
Zhang Rui
4370cbf350 ACPI: EC: trust DSDT GPE for certain HP laptop
On HP Pavilion Gaming Laptop 15-cx0xxx, the ECDT EC and DSDT EC share
the same port addresses but different GPEs. And the DSDT GPE is the
right one to use.

The current code duplicates DSDT EC with ECDT EC if the port addresses
are the same, and uses ECDT GPE as a result, which breaks this machine.

Introduce a new quirk for the HP laptop to trust the DSDT GPE,
and avoid duplicating even if the port addresses are the same.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=209989
Reported-and-tested-by: Shao Fu, Chen <leo881003@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-21 18:48:22 +02:00
Rafael J. Wysocki
8d287e8292 ACPI: scan: Simplify acpi_table_events_fn()
Notice that the table field of struct acpi_table_events_work is never
read and its event field is always equal to ACPI_TABLE_EVENT_LOAD, so
both of them are redundant.

Accordingly, drop struct acpi_table_events_work and use struct
work_struct directly instead of it, simplify acpi_scan_table_handler()
and rename it to acpi_scan_table_notify().

Moreover, make acpi_bus_table_handler() check the event code against
ACPI_TABLE_EVENT_LOAD before calling acpi_scan_table_notify(), so it
is not necessary to do that check in the latter.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-21 18:42:57 +02:00
Rafael J. Wysocki
6cbab787c8 Merge back cpufreq material for v5.14. 2021-06-21 18:32:42 +02:00
Robert Marko
abe66bb7a2 arm64: dts: ipq8074: Add QUP6 I2C node
Add node to support the QUP6 I2C controller inside
of IPQ8074.
It is exactly the same as QUP2 and QUP3 controllers.

Some routers like Xiaomi AX9000 and Netgear RBK850
use this bus.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20210619162751.2336974-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-21 11:21:11 -05:00
Gao Xiang
1fcb6fcd74 nfs: fix acl memory leak of posix_acl_create()
When looking into another nfs xfstests report, I found acl and
default_acl in nfs3_proc_create() and nfs3_proc_mknod() error
paths are possibly leaked. Fix them in advance.

Fixes: 013cdf1088 ("nfs: use generic posix ACL infrastructure for v3 Posix ACLs")
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-06-21 12:06:16 -04:00
NeilBrown
bc1c56e9bb SUNRPC: prevent port reuse on transports which don't request it.
If an RPC client is created without RPC_CLNT_CREATE_REUSEPORT, it should
not reuse the source port when a TCP connection is re-established.
This is currently implemented by preventing the source port being
recorded after a successful connection (the call to xs_set_srcport()).

However the source port is also recorded after a successful bind in xs_bind().
This may not be needed at all and certainly is not wanted when
RPC_CLNT_CREATE_REUSEPORT wasn't requested.

So avoid that assignment when xprt.reuseport is not set.

With this change, NFSv4.1 and later mounts use a different port number on
each connection.  This is helpful with some firewalls which don't cope
well with port reuse.

Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: e6237b6feb ("NFSv4.1: Don't rebind to the same source port when reconnecting to the server")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-06-21 12:06:16 -04:00
Colin Ian King
bb24cc0f37 rpc: remove redundant initialization of variable status
The variable status is being initialized with a value that is never
read, the assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-06-21 12:06:16 -04:00
Daniel Vetter
ca319ee9ca drm/i915/eb: Fix pagefault disabling in the first slowpath
In

commit ebc0808fa2
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Oct 18 13:02:51 2016 +0100

    drm/i915: Restrict pagefault disabling to just around copy_from_user()

we entirely missed that there's a slow path call to eb_relocate_entry
(or i915_gem_execbuffer_relocate_entry as it was called back then)
which was left fully wrapped by pagefault_disable/enable() calls.
Previously any issues with blocking calls where handled by the
following code:

	/* we can't wait for rendering with pagefaults disabled */
	if (pagefault_disabled() && !object_is_idle(obj))
		return -EFAULT;

Now at this point the prefaulting was still around, which means in
normal applications it was very hard to hit this bug. No idea why the
regressions in igts weren't caught.

Now this all changed big time with 2 patches merged closely together.

First

commit 2889caa923
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jun 16 15:05:19 2017 +0100

    drm/i915: Eliminate lots of iterations over the execobjects array

removes the prefaulting from the first relocation path, pushing it into
the first slowpath (of which this patch added a total of 3 escalation
levels). This would have really quickly uncovered the above bug, were
it not for immediate adding a duct-tape on top with

commit 7dd4f6729f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jun 16 15:05:24 2017 +0100

    drm/i915: Async GPU relocation processing

by pushing all all the relocation patching to the gpu if the buffer
was busy, which avoided all the possible blocking calls.

The entire slowpath was then furthermore ditched in

commit 7dc8f11437
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Mar 11 16:03:10 2020 +0000

        drm/i915/gem: Drop relocation slowpath

and resurrected in

commit fd1500fcd4
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Wed Aug 19 16:08:43 2020 +0200

        Revert "drm/i915/gem: Drop relocation slowpath".

but this did not further impact what's going on.

Since pagefault_disable/enable is an atomic section, any sleeping in
there is prohibited, and we definitely do that without gpu relocations
since we have to wait for the gpu usage to finish before we can patch
up the relocations.

Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210618214503.1773805-1-daniel.vetter@ffwll.ch
2021-06-21 17:45:37 +02:00
Desmond Cheong Zhi Xi
1815d9c86e drm: add a locked version of drm_is_current_master
While checking the master status of the DRM file in
drm_is_current_master(), the device's master mutex should be
held. Without the mutex, the pointer fpriv->master may be freed
concurrently by another process calling drm_setmaster_ioctl(). This
could lead to use-after-free errors when the pointer is subsequently
dereferenced in drm_lease_owner().

The callers of drm_is_current_master() from drm_auth.c hold the
device's master mutex, but external callers do not. Hence, we implement
drm_is_current_master_locked() to be used within drm_auth.c, and
modify drm_is_current_master() to grab the device's master mutex
before checking the master status.

Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210620110327.4964-2-desmondcheongzx@gmail.com
2021-06-21 17:42:28 +02:00
Avihai Horon
1477d44ce4 RDMA/mlx5: Enable Relaxed Ordering by default for kernel ULPs
Relaxed Ordering is a capability that can only benefit users that support
it. All kernel ULPs should support Relaxed Ordering, as they are designed
to read data only after observing the CQE and use the DMA API correctly.

Hence, implicitly enable Relaxed Ordering by default for MR transfers in
kernel ULPs.

Link: https://lore.kernel.org/r/b7e820aab7402b8efa63605f4ea465831b3b1e5e.1623236426.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21 12:33:08 -03:00
Peter Zijlstra
31197d3a0f objtool/x86: Ignore __x86_indirect_alt_* symbols
Because the __x86_indirect_alt* symbols are just that, objtool will
try and validate them as regular symbols, instead of the alternative
replacements that they are.

This goes sideways for FRAME_POINTER=y builds; which generate a fair
amount of warnings.

Fixes: 9bc0bb5072 ("objtool/x86: Rewrite retpoline thunk calls")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YNCgxwLBiK9wclYJ@hirez.programming.kicks-ass.net
2021-06-21 17:26:57 +02:00
Jonathan Edwards
5c10a3dbe9 libbpf: Add extra BPF_PROG_TYPE check to bpf_object__probe_loading
eBPF has been backported for RHEL 7 w/ kernel 3.10-940+ [0]. However only
the following program types are supported [1]:

  BPF_PROG_TYPE_KPROBE
  BPF_PROG_TYPE_TRACEPOINT
  BPF_PROG_TYPE_PERF_EVENT

For libbpf this causes an EINVAL return during the bpf_object__probe_loading
call which only checks to see if programs of type BPF_PROG_TYPE_SOCKET_FILTER
can load.

The following will try BPF_PROG_TYPE_TRACEPOINT as a fallback attempt before
erroring out. BPF_PROG_TYPE_KPROBE was not a good candidate because on some
kernels it requires knowledge of the LINUX_VERSION_CODE.

  [0] https://www.redhat.com/en/blog/introduction-ebpf-red-hat-enterprise-linux-7
  [1] https://access.redhat.com/articles/3550581

Signed-off-by: Jonathan Edwards <jonathan.edwards@165gc.onmicrosoft.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210619151007.GA6963@165gc.onmicrosoft.com
2021-06-21 17:21:07 +02:00
Cong Wang
781dd0431e skmsg: Increase sk->sk_drops when dropping packets
It is hard to observe packet drops without increasing relevant
drop counters, here we should increase sk->sk_drops which is
a protocol-independent counter. Fortunately psock is always
associated with a struct sock, we can just use psock->sk.

Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-9-xiyou.wangcong@gmail.com
2021-06-21 16:48:44 +02:00
Cong Wang
42830571f1 skmsg: Pass source psock to sk_psock_skb_redirect()
sk_psock_skb_redirect() only takes skb as a parameter, we
will need to know where this skb is from, so just pass
the source psock to this function as a new parameter.
This patch prepares for the next one.

Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-8-xiyou.wangcong@gmail.com
2021-06-21 16:48:41 +02:00
Cong Wang
1581a6c1c3 skmsg: Teach sk_psock_verdict_apply() to return errors
Currently sk_psock_verdict_apply() is void, but it handles some
error conditions too. Its caller is impossible to learn whether
it succeeds or fails, especially sk_psock_verdict_recv().

Make it return int to indicate error cases and propagate errors
to callers properly.

Fixes: ef5659280e ("bpf, sockmap: Allow skipping sk_skb parser program")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-7-xiyou.wangcong@gmail.com
2021-06-21 16:48:37 +02:00
Cong Wang
0cf6672b23 skmsg: Fix a memory leak in sk_psock_verdict_apply()
If the dest psock does not set SK_PSOCK_TX_ENABLED,
the skb can't be queued anywhere so must be dropped.

This one is found during code review.

Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-6-xiyou.wangcong@gmail.com
2021-06-21 16:48:33 +02:00
Cong Wang
30b9c54a70 skmsg: Clear skb redirect pointer before dropping it
When we drop skb inside sk_psock_skb_redirect(), we have to clear
its skb->_sk_redir pointer too, otherwise kfree_skb() would
misinterpret it as a valid skb->_skb_refdst and dst_release()
would eventually complain.

Fixes: e3526bb92a ("skmsg: Move sk_redir from TCP_SKB_CB to skb")
Reported-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-5-xiyou.wangcong@gmail.com
2021-06-21 16:48:29 +02:00
Cong Wang
e00a5c331b udp: Fix a memory leak in udp_read_sock()
sk_psock_verdict_recv() clones the skb and uses the clone
afterward, so udp_read_sock() should free the skb after using
it, regardless of error or not.

This fixes a real kmemleak.

Fixes: d7f571188e ("udp: Implement ->read_sock() for sockmap")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-4-xiyou.wangcong@gmail.com
2021-06-21 16:48:24 +02:00
Cong Wang
a7e65fe7d8 selftests/bpf: Retry for EAGAIN in udp_redir_to_connected()
We use non-blocking sockets for testing sockmap redirections,
and got some random EAGAIN errors from UDP tests.

There is no guarantee the packet would be immediately available
to receive as soon as it is sent out, even on the local host.
For UDP, this is especially true because it does not lock the
sock during BH (unlike the TCP path). This is probably why we
only saw this error in UDP cases.

No matter how hard we try to make the queue empty check accurate,
it is always possible for recvmsg() to beat ->sk_data_ready().
Therefore, we should just retry in case of EAGAIN.

Fixes: d6378af615 ("selftests/bpf: Add a test case for udp sockmap")
Reported-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-3-xiyou.wangcong@gmail.com
2021-06-21 16:48:21 +02:00
Cong Wang
9f2470fbc4 skmsg: Improve udp_bpf_recvmsg() accuracy
I tried to reuse sk_msg_wait_data() for different protocols,
but it turns out it can not be simply reused. For example,
UDP actually uses two queues to receive skb:
udp_sk(sk)->reader_queue and sk->sk_receive_queue. So we have
to check both of them to know whether we have received any
packet.

Also, UDP does not lock the sock during BH Rx path, it makes
no sense for its ->recvmsg() to lock the sock. It is always
possible for ->recvmsg() to be called before packets actually
arrive in the receive queue, we just use best effort to make
it accurate here.

Fixes: 1f5be6b3b0 ("udp: Implement udp_bpf_recvmsg() for sockmap")
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210615021342.7416-2-xiyou.wangcong@gmail.com
2021-06-21 16:48:11 +02:00
Joerg Roedel
be1a540886 x86/sev: Split up runtime #VC handler for correct state tracking
Split up the #VC handler code into a from-user and a from-kernel part.
This allows clean and correct state tracking, as the #VC handler needs
to enter NMI-state when raised from kernel mode and plain IRQ state when
raised from user-mode.

Fixes: 62441a1fb5 ("x86/sev-es: Correctly track IRQ states in runtime #VC handler")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210618115409.22735-3-joro@8bytes.org
2021-06-21 16:01:05 +02:00
Joerg Roedel
d187f21733 x86/sev: Make sure IRQs are disabled while GHCB is active
The #VC handler only cares about IRQs being disabled while the GHCB is
active, as it must not be interrupted by something which could cause
another #VC while it holds the GHCB (NMI is the exception for which the
backup GHCB exits).

Make sure nothing interrupts the code path while the GHCB is active
by making sure that callers of __sev_{get,put}_ghcb() have disabled
interrupts upfront.

 [ bp: Massage commit message. ]

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210618115409.22735-2-joro@8bytes.org
2021-06-21 15:51:21 +02:00
Dan Carpenter
eed75ce7c8 drm/amdgpu: fix amdgpu_preempt_mgr_new()
There is a reversed if statement in amdgpu_preempt_mgr_new() so it
always returns -ENOMEM.

Fixes: 09b020bb05 ("Merge tag 'drm-misc-next-2021-06-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YMxbQXg/Wqm0ACxt@mwanda
Signed-off-by: Christian König <christian.koenig@amd.com>
2021-06-21 15:24:29 +02:00
David Sterba
ae5d29d4e7 btrfs: inline wait_current_trans_commit_start in its caller
Function wait_current_trans_commit_start is now fairly trivial so it can
be inlined in its only caller.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:11 +02:00
David Sterba
32cc4f8759 btrfs: sink wait_for_unblock parameter to async commit
There's only one caller left btrfs_ioctl_start_sync that passes 0, so we
can remove the switch in btrfs_commit_transaction_async.

A cleanup 9babda9f33 ("btrfs: Remove async_transid from
btrfs_mksubvol/create_subvol/create_snapshot") removed calls that passed
1, so this is a followup.

As this removes last call of wait_current_trans_commit_start_and_unblock,
remove the function as well.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:11 +02:00
Nathan Chancellor
bfaa324e9a btrfs: remove total_data_size variable in btrfs_batch_insert_items()
clang warns:

  fs/btrfs/delayed-inode.c:684:6: warning: variable 'total_data_size' set
  but not used [-Wunused-but-set-variable]
	  int total_data_size = 0, total_size = 0;
	      ^
  1 warning generated.

This variable's value has been unused since commit fc0d82e103 ("btrfs:
sink total_data parameter in setup_items_for_insert"). Eliminate it.

Link: https://github.com/ClangBuiltLinux/linux/issues/1391
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:11 +02:00
Nikolay Borisov
77d255348b btrfs: eliminate insert label in add_falloc_range
By way of inverting the list_empty conditional the insert label can be
eliminated, making the function's flow entirely linear.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
3d078efae6 btrfs: subpage: fix a rare race between metadata endio and eb freeing
[BUG]
There is a very rare ASSERT() triggering during full fstests run for
subpage rw support.

No other reproducer so far.

The ASSERT() gets triggered for metadata read in
btrfs_page_set_uptodate() inside end_page_read().

[CAUSE]
There is still a small race window for metadata only, the race could
happen like this:

                T1                  |              T2
------------------------------------+-----------------------------
end_bio_extent_readpage()           |
|- btrfs_validate_metadata_buffer() |
|  |- free_extent_buffer()          |
|     Still have 2 refs             |
|- end_page_read()                  |
   |- if (unlikely(PagePrivate())   |
   |  The page still has Private    |
   |                                | free_extent_buffer()
   |                                | |  Only one ref 1, will be
   |                                | |  released
   |                                | |- detach_extent_buffer_page()
   |                                |    |- btrfs_detach_subpage()
   |- btrfs_set_page_uptodate()     |
      The page no longer has Private|
      >>> ASSERT() triggered <<<    |

This race window is super small, thus pretty hard to hit, even with so
many runs of fstests.

But the race window is still there, we have to go another way to solve
it other than relying on random PagePrivate() check.

Data path is not affected, as it will lock the page before reading,
while unlocking the page after the last read has finished, thus no race
window.

[FIX]
This patch will fix the bug by repurposing btrfs_subpage::readers.

Now btrfs_subpage::readers will be a member shared by both metadata and
data.

For metadata path, we don't do the page unlock as metadata only relies
on extent locking.

At the same time, teach page_range_has_eb() to take
btrfs_subpage::readers into consideration.

So that even if the last eb of a page gets freed, page::private won't be
detached as long as there still are pending end_page_read() calls.

By this we eliminate the race window, this will slight increase the
metadata memory usage, as the page may not be released as frequently as
usual.  But it should not be a big deal.

The code got introduced in ("btrfs: submit read time repair only for
each corrupted sector"), but the fix is in a separate patch to keep the
problem description and the crash is rare so it should not hurt
bisectability.

Signed-off-by: Qu Wegruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
bcd77455d5 btrfs: don't clear page extent mapped if we're not invalidating the full page
[BUG]
With current btrfs subpage rw support, the following script can lead to
fs hang:

  $ mkfs.btrfs -f -s 4k $dev
  $ mount $dev -o nospace_cache $mnt
  $ fsstress -w -n 100 -p 1 -s 1608140256 -v -d $mnt

The fs will hang at btrfs_start_ordered_extent().

[CAUSE]
In above test case, btrfs_invalidate() will be called with the following
parameters:

  offset = 0 length = 53248 page dirty = 1 subpage dirty bitmap = 0x2000

Since @offset is 0, btrfs_invalidate() will try to invalidate the full
page, and finally call clear_page_extent_mapped() which will detach
subpage structure from the page.

And since the page no longer has subpage structure, the subpage dirty
bitmap will be cleared, preventing the dirty range from being written
back, thus no way to wake up the ordered extent.

[FIX]
Just follow other filesystems, only to invalidate the page if the range
covers the full page.

There are cases like truncate_setsize() which can call
btrfs_invalidatepage() with offset == 0 and length != 0 for the last
page of an inode.

Although the old code will still try to invalidate the full page, we are
still safe to just wait for ordered extent to finish.
So it shouldn't cause extra problems.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
0528476b6a btrfs: fix the filemap_range_has_page() call in btrfs_punch_hole_lock_range()
[BUG]
With current subpage RW support, the following script can hang the fs
with 64K page size.

 # mkfs.btrfs -f -s 4k $dev
 # mount $dev -o nospace_cache $mnt
 # fsstress -w -n 50 -p 1 -s 1607749395 -d $mnt

The kernel will do an infinite loop in btrfs_punch_hole_lock_range().

[CAUSE]
In btrfs_punch_hole_lock_range() we:

- Truncate page cache range
- Lock extent io tree
- Wait any ordered extents in the range.

We exit the loop until we meet all the following conditions:

- No ordered extent in the lock range
- No page is in the lock range

The latter condition has a pitfall, it only works for sector size ==
PAGE_SIZE case.

While can't handle the following subpage case:

  0       32K     64K     96K     128K
  |       |///////||//////|       ||

lockstart=32K
lockend=96K - 1

In this case, although the range crosses 2 pages,
truncate_pagecache_range() will invalidate no page at all, but only zero
the [32K, 96K) range of the two pages.

Thus filemap_range_has_page(32K, 96K-1) will always return true, thus we
will never meet the loop exit condition.

[FIX]
Fix the problem by doing page alignment for the lock range.

Function filemap_range_has_page() has already handled lend < lstart
case, we only need to round up @lockstart, and round_down @lockend for
truncate_pagecache_range().

This modification should not change any thing for sector size ==
PAGE_SIZE case, as in that case our range is already page aligned.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
3115deb381 btrfs: reflink: make copy_inline_to_page() to be subpage compatible
The modifications are:

- Page copy destination
  For subpage case, one page can contain multiple sectors, thus we can
  no longer expect the memcpy_to_page()/btrfs_decompress() to copy
  data into page offset 0.
  The correct offset is offset_in_page(file_offset) now, which should
  handle both regular sectorsize and subpage cases well.

- Page status update
  Now we need to use subpage helper to handle the page status update.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
2d8ec40ee4 btrfs: make btrfs_page_mkwrite() to be subpage compatible
Only set_page_dirty() and SetPageUptodate() is not subpage compatible.
Convert them to subpage helpers, so that __extent_writepage_io() can
submit page content correctly.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
6c9ac8be45 btrfs: make btrfs_truncate_block() to be subpage compatible
btrfs_truncate_block() itself is already mostly subpage compatible, the
only missing part is the page dirtying code.

Currently if we have a sector that needs to be truncated, we set the
sector aligned range delalloc, then set the full page dirty.

The problem is, current subpage code requires subpage dirty bit to be
set, or __extent_writepage_io() won't submit bio, thus leads to ordered
extent never to finish.

So this patch will make btrfs_truncate_block() to call
btrfs_page_set_dirty() helper to replace set_page_dirty() to fix the
problem.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
c5ef5c6c73 btrfs: make __extent_writepage_io() only submit dirty range for subpage
__extent_writepage_io() function originally just iterates through all
the extent maps of a page, and submits any regular extents.

This is fine for sectorsize == PAGE_SIZE case, as if a page is dirty, we
need to submit the only sector contained in the page.

But for subpage case, one dirty page can contain several clean sectors
with at least one dirty sector.

If __extent_writepage_io() still submit all regular extent maps, it can
submit data which is already written to disk.
And since such already written data won't have corresponding ordered
extents, it will trigger a BUG_ON() in btrfs_csum_one_bio().

Change the behavior of __extent_writepage_io() by finding the first
dirty byte in the page, and only submit the dirty range other than the
full extent.

Since we're also here, also modify the following calls to be subpage
compatible:

- SetPageError()
- end_page_writeback()

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
d2a9106448 btrfs: make btrfs_set_range_writeback() subpage compatible
Function btrfs_set_range_writeback() currently just sets the page
writeback unconditionally.

Change it to call the subpage helper so that we can handle both cases
well.

Since the subpage helpers needs btrfs_fs_info, also change the parameter
to accept btrfs_inode.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
4750af3bbe btrfs: prevent extent_clear_unlock_delalloc() to unlock page not locked by __process_pages_contig()
In cow_file_range(), after we have succeeded creating an inline extent,
we unlock the page with extent_clear_unlock_delalloc() by passing
locked_page == NULL.

For sectorsize == PAGE_SIZE case, this is just making the page lock and
unlock harder to grab.

But for incoming subpage case, it can be a big problem.

For incoming subpage case, page locking have two entry points:

- __process_pages_contig()
  In that case, we know exactly the range we want to lock (which only
  requires sector alignment).
  To handle the subpage requirement, we introduce btrfs_subpage::writers
  to page::private, and will update it in __process_pages_contig().

- Other directly lock/unlock_page() call sites
  Those won't touch btrfs_subpage::writers at all.

This means, page locked by __process_pages_contig() can only be unlocked
by __process_pages_contig().
Thankfully we already have the existing infrastructure in the form of
@locked_page in various call sites.

Unfortunately, extent_clear_unlock_delalloc() in cow_file_range() after
creating an inline extent is the exception.
It intentionally call extent_clear_unlock_delalloc() with locked_page ==
NULL, to also unlock current page (and clear its dirty/writeback bits).

To co-operate with incoming subpage modifications, and make the page
lock/unlock pair easier to understand, this patch will still call
extent_clear_unlock_delalloc() with locked_page, and only unlock the
page in __extent_writepage().

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
a33a8e9afc btrfs: update locked page dirty/writeback/error bits in __process_pages_contig
When __process_pages_contig() gets called for
extent_clear_unlock_delalloc(), if we hit the locked page, only Private2
bit is updated, but dirty/writeback/error bits are all skipped.

There are several call sites that call extent_clear_unlock_delalloc()
with locked_page and PAGE_CLEAR_DIRTY/PAGE_SET_WRITEBACK/PAGE_END_WRITEBACK

- cow_file_range()
- run_delalloc_nocow()
- cow_file_range_async()
  All for their error handling branches.

For those call sites, since we skip the locked page for
dirty/error/writeback bit update, the locked page will still have its
subpage dirty bit remaining.

Normally it's the call sites which locked the page to handle the locked
page, but it won't hurt if we also do the update.

Especially there are already other call sites doing the same thing by
manually passing NULL as locked_page.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
b945a4637e btrfs: make page Ordered bit to be subpage compatible
This involves the following modification:

- Ordered extent creation
  This is done in process_one_page(), now PAGE_SET_ORDERED will call
  subpage helper to do the work.

- endio functions
  This is done in btrfs_mark_ordered_io_finished().

- btrfs_invalidatepage()

- btrfs_cleanup_ordered_extents()
  Use the subpage page helper, and add an extra branch to exit if the
  locked page have covered the full range.

Now the usage of page Ordered flag for ordered extent accounting is fully
subpage compatible.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Qu Wenruo
6f17400bd9 btrfs: introduce helpers for subpage ordered status
This patch introduces the following functions to handle btrfs subpage
ordered (Private2) status:

- btrfs_subpage_set_ordered()
- btrfs_subpage_clear_ordered()
- btrfs_subpage_test_ordered()
  These helpers can only be called when the range is ensured to be
  inside the page.

- btrfs_page_set_ordered()
- btrfs_page_clear_ordered()
- btrfs_page_test_ordered()
  These helpers can handle both regular sector size and subpage without
  problem.

These functions are here to coordinate btrfs_invalidatepage() with
btrfs_writepage_endio_finish_ordered(), to make sure only one of those
functions can finish the ordered extent.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00
Qu Wenruo
1e1de38792 btrfs: make process_one_page() to handle subpage locking
Introduce a new data inodes specific subpage member, writers, to record
how many sectors are under page lock for delalloc writing.

This member acts pretty much the same as readers, except it's only for
delalloc writes.

This is important for delalloc code to trace which page can really be
freed, as we have cases like run_delalloc_nocow() where we may exit
processing nocow range inside a page, but need to exit to do cow half
way.
In that case, we need a way to determine if we can really unlock a full
page.

With the new btrfs_subpage::writers, there is a new requirement:
- Page locked by process_one_page() must be unlocked by
  process_one_page()
  There are still tons of call sites manually lock and unlock a page,
  without updating btrfs_subpage::writers.
  So if we lock a page through process_one_page() then it must be
  unlocked by process_one_page() to keep btrfs_subpage::writers
  consistent.

  This will be handled in next patch.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:09 +02:00