Commit graph

1,309,764 commits

Author SHA1 Message Date
Michel Alex
32c055ef56 clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
Commit 4e197ee880 ("clk: imx6ul: add
ethernet refclock mux support") sets the internal clock as default
ethernet clock.

Since IMX6UL_CLK_ENET_REF cannot be parent for IMX6UL_CLK_ENET1_REF_SEL,
the call to clk_set_parent() fails. IMX6UL_CLK_ENET1_REF_125M is the correct
parent and shall be used instead.
Same applies for IMX6UL_CLK_ENET2_REF_SEL, for which IMX6UL_CLK_ENET2_REF_125M
is the correct parent.

Cc: stable@vger.kernel.org
Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/AS1P250MB0608F9CE4009DCE65C61EEDEA9922@AS1P250MB0608.EURP250.PROD.OUTLOOK.COM
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-09-04 12:39:38 +03:00
Jason Gunthorpe
2910a7fa1b iommu/amd: Do not set the D bit on AMD v2 table entries
The manual says that bit 6 is IGN for all Page-Table Base Address
pointers, don't set it.

Fixes: aaac38f614 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:39:03 +02:00
Jason Gunthorpe
7e51586629 iommu/amd: Correct the reported page sizes from the V1 table
The HW only has 52 bits of physical address support, the supported page
sizes should not have bits set beyond this. Further the spec says that the
6th level does not support any "default page size for translation entries"
meaning leafs in the 6th level are not allowed too.

Rework the definition to use GENMASK to build the range of supported pages
from the top of physical to 4k.

Nothing ever uses such large pages, so this is a cosmetic/documentation
improvement only.

Reported-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:39:03 +02:00
Jason Gunthorpe
c435209f72 iommu/amd: Remove the confusing dummy iommu_flush_ops tlb ops
The iommu driver is supposed to provide these ops to its io_pgtable
implementation so that it can hook the invalidations and do the right
thing.

They are called by wrapper functions like io_pgtable_tlb_add_page() etc,
which the AMD code never calls.

Instead it directly calls the AMD IOMMU invalidation functions by casting
to the struct protection_domain. Remove it all.

Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:39:02 +02:00
Jason Gunthorpe
a06dcb6b78 iommu/amd: Fix typo of , instead of ;
Generates the same code, but is not the expected C style.

Fixes: aaac38f614 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:39:02 +02:00
Jason Gunthorpe
485534bfcc iommu/amd: Remove conditions from domain free paths
Don't use tlb as some flag to indicate if protection_domain_alloc()
completed. Have protection_domain_alloc() unwind itself in the normal
kernel style and require protection_domain_free() only be called on
successful results of protection_domain_alloc().

Also, the amd_iommu_domain_free() op is never called by the core code with
a NULL argument, so remove all the NULL tests as well.

Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:39:01 +02:00
Jason Gunthorpe
9ac0b3380a iommu/amd: Narrow the use of struct protection_domain to invalidation
The AMD io_pgtable stuff doesn't implement the tlb ops callbacks, instead
it invokes the invalidation ops directly on the struct protection_domain.

Narrow the use of struct protection_domain to only those few code paths.
Make everything else properly use struct amd_io_pgtable through the call
chains, which is the correct modular type for an io-pgtable module.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/9-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:39:00 +02:00
Jason Gunthorpe
47f218d108 iommu/amd: Store the nid in io_pgtable_cfg instead of the domain
We already have memory in the union here that is being wasted in AMD's
case, use it to store the nid.

Putting the nid here further isolates the io_pgtable code from the struct
protection_domain.

Fixup protection_domain_alloc so that the NID from the device is provided,
at this point dev is never NULL for AMD so this will now allocate the
first table pointer on the correct NUMA node.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/8-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:38:34 +02:00
Jason Gunthorpe
977fc27ca7 iommu/amd: Remove amd_io_pgtable::pgtbl_cfg
This struct is already in iop.cfg, we don't need two.

AMD is using this API sort of wrong, the cfg is supposed to be passed in
and then the allocation function will allocate ops memory and copy the
passed config into the new memory. Keep it kind of wrong and pass in the
cfg memory that is already part of the pagetable struct.

Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:38:33 +02:00
Jason Gunthorpe
670b57796c iommu/amd: Rename struct amd_io_pgtable iopt to pgtbl
There is struct protection_domain iopt and struct amd_io_pgtable iopt.
Next patches are going to want to write domain.iopt.iopt.xx which is quite
unnatural to read.

Give one of them a different name, amd_io_pgtable has fewer references so
call it pgtbl, to match pgtbl_cfg, instead.

Suggested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:38:32 +02:00
Jason Gunthorpe
1ed2d21d47 iommu/amd: Remove the amd_iommu_domain_set_pt_root() and related
Looks like many refactorings here have left this confused. There is only
one storage of the root/mode, it is in the iop struct.

increase_address_space() calls amd_iommu_domain_set_pgtable() with values
that it already stored in iop a few lines above.

amd_iommu_domain_clr_pt_root() is zero'ing memory we are about to free. It
used to protect against a double free of root, but that is gone now.

Remove amd_iommu_domain_set_pgtable(), amd_iommu_domain_set_pt_root(),
amd_iommu_domain_clr_pt_root() as they are all pointless.

Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:38:31 +02:00
Jason Gunthorpe
322d889ae7 iommu/amd: Remove amd_iommu_domain_update() from page table freeing
It is a serious bug if the domain is still mapped to any DTEs when it is
freed as we immediately start freeing page table memory, so any remaining
HW touch will UAF.

If it is not mapped then dev_list is empty and amd_iommu_domain_update()
does nothing.

Remove it and add a WARN_ON() to catch this class of bug.

Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:37:43 +02:00
Jason Gunthorpe
7a41dcb52f iommu/amd: Set the pgsize_bitmap correctly
When using io_pgtable the correct pgsize_bitmap is stored in the cfg, both
v1_alloc_pgtable() and v2_alloc_pgtable() set it correctly.

This fixes a bug where the v2 pgtable had the wrong pgsize as
protection_domain_init_v2() would set it and then do_iommu_domain_alloc()
immediately resets it.

Remove the confusing ops.pgsize_bitmap since that is not used if the
driver sets domain.pgsize_bitmap.

Fixes: 134288158a ("iommu/amd: Add domain_alloc_user based domain allocation")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:37:42 +02:00
Jason Gunthorpe
b0a6c883bc iommu/amd: Allocate the page table root using GFP_KERNEL
Domain allocation is always done under a sleepable context, the v1 path
and other drivers use GFP_KERNEL already. Fix the v2 path to also use
GFP_KERNEL.

Fixes: 0d571dcbe7 ("iommu/amd: Allocate page table using numa locality info")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:37:42 +02:00
Jason Gunthorpe
8d00b77a52 iommu/amd: Move allocation of the top table into v1_alloc_pgtable
All the page table memory should be allocated/free within the io_pgtable
struct. The v2 path is already doing this, make it consistent.

It is hard to see but the free of the root in protection_domain_free() is
a NOP on the success path because v1_free_pgtable() does
amd_iommu_domain_clr_pt_root().

The root memory is already freed because free_sub_pt() put it on the
freelist. The free path in protection_domain_free() is only used during
error unwind of protection_domain_alloc().

Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-09-04 11:37:41 +02:00
Frank Li
f68db46a09 arm64: dts: imx: rename gpio hog as <gpio name>-hog
Rename admin_led_lower to admin-led-lower-hog.
Rename gpio rs485_en as rs485-en-hog.
Rename gpio uart4_rs485_en to uart4-rs485-en-hog.

Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: gpio@76:
  'admin_led_lower' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtb:
  gpio@30230000: 'rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
  gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'

Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:24 +08:00
Tarang Raval
6c2a1f4f71 arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM
Adds the DTSI file for the Variscite VAR-SOM-MX8MP System on Module which
is delivered with the Variscite Symphony Evaluation Kit.

Initial support includes:
- Serial console
- eMMC
- SD card

Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:24 +08:00
Krzysztof Kozlowski
1a15e6751e arm64: dts: imx8mm-var-som: drop unused top-level compatible
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone
without motherboard, so drop the top-level compatible field to avoid any
false impression that such usage is possible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:24 +08:00
Joy Zou
6a312e42c5 arm64: dts: ls1088ardb: add new RTC PCF2131 support
Add RTC PCF2131 node for new ls1088ardb board..

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:24 +08:00
João Paulo Gonçalves
0b8b11f00a arm64: dts: colibri-imx8x: Cleanup comments
Remove unnecessary comments. The Colibri-iMX8X doesn't support FlexCAN,
and the GPU is already enabled in the SOC dtsi.

Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:24 +08:00
Philippe Schenker
251268b101 arm64: dts: colibri-imx8x: Add 50mhz clock for eth
Change enet0_lpcg to get the clock value needed in Colibri-iMX8X for
100mbps ethernet.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:24 +08:00
João Paulo Gonçalves
9d4b4f60b5 arm64: dts: colibri-imx8x: Add adma_pwm
Add adma_pwm node for Colibri-iMX8X carrier boards.

Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:24 +08:00
João Paulo Gonçalves
6cfdfed8a6 arm64: dts: colibri-imx8x: Add vpu support
Enable VPU on Colibri-iMX8X.

Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:24 +08:00
Francesco Dolcini
8b36674659 arm64: dts: colibri-imx8x: Add USB3803 HUB
Add USB3803 HUB, this is required for Bluetooth and USB
functionalities.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
Francesco Dolcini
8b23ba41e6 arm64: dts: colibri-imx8x: Add PMIC thermal zone
Add PMIC thermal zones.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
João Paulo Gonçalves
ce97bdc344 arm64: dts: colibri-imx8x: Add sound card
Add audio support for Colibri-iMX8X sound card.

Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
Francesco Dolcini
0f26437835 arm64: dts: colibri-imx8x: Add fxl6408 gpio expander
Add fxl6408 gpio expander, this is required for Wi-Fi, Bluetooth and USB
functionalities.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
João Paulo Gonçalves
7f6b48a663 arm64: dts: colibri-imx8x: Add analog inputs
Add adc nodes for analog inputs support for all Colibri-iMX8X carrier
boards.

Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
Emanuele Ghidoli
53f7fe5070 arm64: dts: colibri-imx8x: Add usb support
Add USB HOST and OTG support to Colibri-iMX8X carrier boards.

Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
Frank Li
b237975b2c arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes
Enable usb3.0 and related usb type C nodes.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
Frank Li
1110cb4fc6 arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem
Add i2c node in mipi[0,1] subystem for imx8qm-mek.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
Frank Li
d8b48040cb arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem
Add pwm[0,1] and i2c[0,1] in lvds subsystem.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
Frank Li
52c9971edd arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region
Add two cm4 remote-proc and related memory regions.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:23 +08:00
Frank Li
b6b7aaf381 arm64: dts: imx8qm: add mipi subsystem
Include common imx8-ss-mipi0.dtsi and imx8-ss-mipi1.dtsi.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Frank Li
9b0a5fac03 arm64: dts: imx8: add basic mipi subsystem
Add basic mipi subsystem for imx8qm and imx8qxp.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Frank Li
cb53240c04 arm64: dts: imx8qm: add lvds subsystem
Add irqsteer, pwm and i2c in lvds subsystem.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Frank Li
0fba24b3b9 arm64: dts: imx8: add basic lvds0 and lvds1 subsystem
Add basic lvds0 and lvds1 subsystem for imx8qm an imx8qxp.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Wei Fang
7764fef26e arm64: dts: imx95: Add NETCMIX block control support
Add NETCMIX block control support.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Tim Harvey
124ec4bbaf arm64: dts: freescale: rename gw7905 to gw75xx
The GW7905 was renamed to GW7500 before production release.

While we typically do not change compatibles, the GW7905 was never
released before its product name was changed to a GW7500.

The use the the 'xx' wildcard is to denote the fact that this
device-tree can support range of board models from GW7500 to GW7599 as
has been done historically with the Gateworks baseboards to support
various build customizatoins based on the same PCB.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Liu Ying
47ccd0f2df arm64: dts: imx93-11x11-evk: Add PWM backlight for "LVDS" connector
J702 on i.MX93 11x11 EVK base board is a 40-pin connector labelled
"LVDS".  This connector supports PWM backlight with default 12V power
supply and ADP5585 PWM controller.  Add support for the backlight.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Benjamin Hahn
9454132128 arm64: dts: imx8mp-phyboard-pollux-rdk: Add support for PCIe
Add support for the Mini PCIe slot.

Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Liu Ying
52e6774ac3 arm64: dts: imx8mp-evk: Add native HDMI output
J17 on i.MX8mp EVK base board is a HDMI type A connector.
It connects with i.MX8mp HDMI PHY.  Add support for it.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Elinor Montmasson
7c52e1695f arm64: dts: imx8m: update spdif sound card node properties
The merge of imx-spdif driver into fsl-asoc-card brought
new DT properties that can be used with the "fsl,imx-audio-spdif"
compatible:
* The "spdif-controller" property from imx-spdif is named "audio-cpu"
  in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
  with "audio-codec".
  With an S/PDIF, codec drivers spdif_transmitter and
  spdif_receiver should be used.
  Driver imx-spdif used instead the dummy codec and a pair of
  boolean properties, "spdif-in" and "spdif-out".

While backward compatibility is kept to support properties
"spdif-controller", "spdif-in" and "spdif-out", using new properties has
several benefits:
* "audio-cpu" and "audio-codec" are more generic names reflecting
  that the fsl-asoc-card driver supports multiple hardware.
  They are properties already used by devices using the
  fsl-asoc-card driver.
  They are also similar to properties of simple-card: "cpu" and "codec".
* "spdif-in" and "spdif-out" imply the use of the dummy codec in the
  driver. However, there are already two codec drivers for the S/PDIF,
  spdif_transmitter and spdif_receiver.
  It is better to declare S/PDIF Tx and Rx devices in a DT, and then
  reference them with "audio-codec" than using the dummy codec.

For those reasons, this commit updates in-tree DTs to use the new
properties:
* Rename "spdif-controller" property to "audio-cpu".
* Declare S/PDIF transmitter and/or receiver devices, and use them with
  the "audio-codec" property instead of "spdif-out" and/or "spdif-in".

These modifications were tested only on an imx8mn-evk board.

Note that out-of-tree and old DTs are still supported.

Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Adam Ford
7b1e0e8568 arm64: dts: imx8mp-beacon: Enable DW HDMI Bridge
There is a second HDMI connector on the baseboard which is routed
to the DW HDMI bridge through the PVI to the LCDIF3 and requires the
HDMI PHY to be enabled too.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:22 +08:00
Frank Li
96aaa0a893 arm64: dts: imx8mm-beacon-kit: add DVDD-supply and DOVDD-supply
According to binding doc, DVDD-supply and DOVDD-supply is required
properties. Add these to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dtb: camera@10: 'DVDD-supply' is a required proper

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:21 +08:00
Frank Li
6f1d1dc17e arm64: dts: s32v234: remove fallback compatible string arm,cortex-a9-gic
Remove fallback comaptible string arm,cortex-a9-gic to fix below warning:

/home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed:
            ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long
            /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed:
                    ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long
                    'nvidia,tegra210-agic' was expected
                    'arm,cortex-a15-gic' is not one of ['nvidia,tegra186-agic', 'nvidia,tegra194-agic', 'nvidia,tegra234-agic']
            'arm,gic-400' was expected

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:21 +08:00
Frank Li
cb2633ee47 arm64: dts: fsl-ls1088a-ten64: change to low case hex value
Change to low case for hex value to fix below warning:

arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: flash@0:
    partitions: Unevaluated properties are not allowed ('partition@5C0000' was unexpected)

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:21 +08:00
Frank Li
5c7a868e29 arm64: dts: imx8mp-venice: add vddl and vana for sensor@10
Add vddl and vana for sensor@10 to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtb:
	sensor@10: 'VANA-supply' is a required property

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:21 +08:00
Frank Li
e1a23f2ba9 arm64: dts: fsl-lx2160a-tqmlx2160a: change "vcc" to "vdd" for hub*
According to binging doc usb/ti,usb8041.yaml and in
drivers/usb/misc/onboard_usb_dev.h

ti_tusb8041_data = { .supply_names = { "vdd" },};

It should vdd-supply instead vcc-supply.

Fixes: 04b77e0124 ("arm64: dts: freescale: add fsl-lx2160a-mblx2160a board")
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:21 +08:00
Frank Li
f3ab34595c arm64: dts: imx8mm-venice-gw7902(3): add #address-cells for gsc@20
Add #address-cells and #size-cells for gsc@20 node to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dtb:
	gsc@20: '#address-cells' is a required property

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-09-04 17:36:21 +08:00