Commit graph

1,309,764 commits

Author SHA1 Message Date
Breno Leitao
77461c1081 net: dqs: Do not use extern for unused dql_group
When CONFIG_DQL is not enabled, dql_group should be treated as a dead
declaration. However, its current extern declaration assumes the linker
will ignore it, which is generally true across most compiler and
architecture combinations.

But in certain cases, the linker still attempts to resolve the extern
struct, even when the associated code is dead, resulting in a linking
error. For instance the following error in loongarch64:

>> loongarch64-linux-ld: net-sysfs.c:(.text+0x589c): undefined reference to `dql_group'

Modify the declaration of the dead object to be an empty declaration
instead of an extern. This change will prevent the linker from
attempting to resolve an undefined reference.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409012047.eCaOdfQJ-lkp@intel.com/
Fixes: 74293ea1c4 ("net: sysfs: Do not create sysfs for non BQL device")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20240902101734.3260455-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03 12:01:38 -07:00
Jakub Kicinski
7f85b11203 Merge tag 'ieee802154-for-net-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2024-09-01

Simon Horman catched two typos in our headers. No functional change.

* tag 'ieee802154-for-net-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
  ieee802154: Correct spelling in nl802154.h
  mac802154: Correct spelling in mac802154.h
====================

Link: https://patch.msgid.link/20240901184213.2303047-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03 11:59:45 -07:00
Yang Jihong
9b3a48bbe2 perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.

Testcase:
  # perf sched record nice -n 9 perf bench sched messaging -l 10000
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 3.435 [sec]
  [ perf record: Woken up 270 times to write data ]
  [ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]

  # perf sched timehist -h

   Usage: perf sched timehist [<options>]

      -C, --cpu <cpu>       list of cpus to profile
      -D, --dump-raw-trace  dump raw trace in ASCII
      -f, --force           don't complain, do it
      -g, --call-graph      Display call chains if present (default on)
      -I, --idle-hist       Show idle events only
      -i, --input <file>    input file name
      -k, --vmlinux <file>  vmlinux pathname
      -M, --migrations      Show migration events
      -n, --next            Show next task
      -p, --pid <pid[,pid...]>
                            analyze events only for given process id(s)
      -s, --summary         Show only syscall summary with statistics
      -S, --with-summary    Show all syscalls and summary with statistics
      -t, --tid <tid[,tid...]>
                            analyze events only for given thread id(s)
      -V, --cpu-visual      Add CPU visual
      -v, --verbose         be more verbose (show symbol address, etc)
      -w, --wakeups         Show wakeup events
          --kallsyms <file>
                            kallsyms pathname
          --max-stack <n>   Maximum number of functions to display backtrace.
          --prio <prio>     analyze events only for given task priority(ies)
          --show-prio       Show task priority
          --state           Show task state when sched-out
          --symfs <directory>
                            Look for files with symbols relative to this directory
          --time <str>      Time span for analysis (start,stop)

  # perf sched timehist --prio 140
  Samples of sched_switch event do not have callchains.
  Invalid prio string

  # perf sched timehist --show-prio --prio 129
  Samples of sched_switch event do not have callchains.
             time    cpu  task name                       prio      wait time  sch delay   run time
                          [tid/pid]                                    (msec)     (msec)     (msec)
  --------------- ------  ------------------------------  --------  ---------  ---------  ---------
   2090450.765421 [0002]  sched-messaging[1229618]        129           0.000      0.000      0.029
   2090450.765445 [0007]  sched-messaging[1229616]        129           0.000      0.062      0.043
   2090450.765448 [0014]  sched-messaging[1229619]        129           0.000      0.000      0.032
   2090450.765478 [0013]  sched-messaging[1229617]        129           0.000      0.065      0.048
   2090450.765503 [0014]  sched-messaging[1229622]        129           0.000      0.000      0.017
   2090450.765550 [0002]  sched-messaging[1229624]        129           0.000      0.000      0.021
   2090450.765562 [0007]  sched-messaging[1229621]        129           0.000      0.071      0.028
   2090450.765570 [0005]  sched-messaging[1229620]        129           0.000      0.064      0.066
   2090450.765583 [0001]  sched-messaging[1229625]        129           0.000      0.001      0.031
   2090450.765595 [0013]  sched-messaging[1229623]        129           0.000      0.060      0.028
   2090450.765637 [0014]  sched-messaging[1229628]        129           0.000      0.000      0.019
   2090450.765665 [0007]  sched-messaging[1229627]        129           0.000      0.038      0.030
  <SNIP>

  # perf sched timehist --show-prio --prio 0,120-129
  Samples of sched_switch event do not have callchains.
             time    cpu  task name                       prio      wait time  sch delay   run time
                          [tid/pid]                                    (msec)     (msec)     (msec)
  --------------- ------  ------------------------------  --------  ---------  ---------  ---------
   2090450.763231 [0000]  perf[1229608]                   120           0.000      0.000      0.000
   2090450.763235 [0000]  migration/0[15]                 0             0.000      0.001      0.003
   2090450.763263 [0001]  perf[1229608]                   120           0.000      0.000      0.000
   2090450.763268 [0001]  migration/1[21]                 0             0.000      0.001      0.004
   2090450.763302 [0002]  perf[1229608]                   120           0.000      0.000      0.000
   2090450.763309 [0002]  migration/2[27]                 0             0.000      0.001      0.007
   2090450.763338 [0003]  perf[1229608]                   120           0.000      0.000      0.000
   2090450.763343 [0003]  migration/3[33]                 0             0.000      0.001      0.004
   2090450.763459 [0004]  perf[1229608]                   120           0.000      0.000      0.000
   2090450.763469 [0004]  migration/4[39]                 0             0.000      0.002      0.010
   2090450.763496 [0005]  perf[1229608]                   120           0.000      0.000      0.000
   2090450.763501 [0005]  migration/5[45]                 0             0.000      0.001      0.004
   2090450.763613 [0006]  perf[1229608]                   120           0.000      0.000      0.000
   2090450.763622 [0006]  migration/6[51]                 0             0.000      0.001      0.008
   2090450.763652 [0007]  perf[1229608]                   120           0.000      0.000      0.000
   2090450.763660 [0007]  migration/7[57]                 0             0.000      0.001      0.008
  <SNIP>
   2090450.765665 [0001]  <idle>                          120           0.031      0.031      0.081
   2090450.765665 [0007]  sched-messaging[1229627]        129           0.000      0.038      0.030
   2090450.765667 [0000]  s1-perf[8235/7168]              120           0.008      0.000      0.004
   2090450.765684 [0013]  <idle>                          120           0.028      0.028      0.088
   2090450.765685 [0001]  sched-messaging[1229630]        129           0.000      0.001      0.020
   2090450.765688 [0000]  <idle>                          120           0.004      0.004      0.020
   2090450.765689 [0002]  <idle>                          120           0.021      0.021      0.138
   2090450.765691 [0005]  sched-messaging[1229626]        129           0.000      0.085      0.029

Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03 15:45:59 -03:00
Yang Jihong
3fcd740990 perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.

It is disabled by default, which is consistent with original behavior.

The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)

Testcase:

  # perf sched record nice -n 9 true
  [ perf record: Woken up 0 times to write data ]
  [ perf record: Captured and wrote 0.497 MB perf.data ]

  # perf sched timehist -h

   Usage: perf sched timehist [<options>]

      -C, --cpu <cpu>       list of cpus to profile
      -D, --dump-raw-trace  dump raw trace in ASCII
      -f, --force           don't complain, do it
      -g, --call-graph      Display call chains if present (default on)
      -I, --idle-hist       Show idle events only
      -i, --input <file>    input file name
      -k, --vmlinux <file>  vmlinux pathname
      -M, --migrations      Show migration events
      -n, --next            Show next task
      -p, --pid <pid[,pid...]>
                            analyze events only for given process id(s)
      -s, --summary         Show only syscall summary with statistics
      -S, --with-summary    Show all syscalls and summary with statistics
      -t, --tid <tid[,tid...]>
                            analyze events only for given thread id(s)
      -V, --cpu-visual      Add CPU visual
      -v, --verbose         be more verbose (show symbol address, etc)
      -w, --wakeups         Show wakeup events
          --kallsyms <file>
                            kallsyms pathname
          --max-stack <n>   Maximum number of functions to display backtrace.
          --show-prio       Show task priority
          --state           Show task state when sched-out
          --symfs <directory>
                            Look for files with symbols relative to this directory
          --time <str>      Time span for analysis (start,stop)

  # perf sched timehist
  Samples of sched_switch event do not have callchains.
             time    cpu  task name                       wait time  sch delay   run time
                          [tid/pid]                          (msec)     (msec)     (msec)
  --------------- ------  ------------------------------  ---------  ---------  ---------
     23952.006537 [0000]  perf[534]                           0.000      0.000      0.000
     23952.006593 [0000]  migration/0[19]                     0.000      0.014      0.056
     23952.006899 [0001]  perf[534]                           0.000      0.000      0.000
     23952.006947 [0001]  migration/1[22]                     0.000      0.015      0.047
     23952.007138 [0002]  perf[534]                           0.000      0.000      0.000
  <SNIP>

  # perf sched timehist --show-prio
  Samples of sched_switch event do not have callchains.
             time    cpu  task name                       prio      wait time  sch delay   run time
                          [tid/pid]                                    (msec)     (msec)     (msec)
  --------------- ------  ------------------------------  --------  ---------  ---------  ---------
     23952.006537 [0000]  perf[534]                       120           0.000      0.000      0.000
     23952.006593 [0000]  migration/0[19]                 0             0.000      0.014      0.056
     23952.006899 [0001]  perf[534]                       120           0.000      0.000      0.000
  <SNIP>
     23952.034843 [0003]  nice[535]                       120->129      0.189      0.024     23.314
  <SNIP>
     23952.053838 [0005]  rcu_preempt[16]                 120           3.993      0.000      0.023
     23952.053990 [0005]  <idle>                          120           0.023      0.023      0.152
     23952.054137 [0006]  <idle>                          120           1.427      1.427     17.855
     23952.054278 [0007]  <idle>                          120           0.506      0.506      1.650

Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03 15:45:34 -03:00
Stephen Hemminger
3b3a2a9c63 sch/netem: fix use after free in netem_dequeue
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")

Commands to trigger KASAN UaF:

ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF

Fixes: 50612537e9 ("netem: fix classful handling")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03 11:44:23 -07:00
Yang Jihong
b93fb9cf45 perf sched timehist: Remove redundant BUG_ON in timehist_sched_change_event()
The BUG_ON(thread__tid(thread) != 0) in timehist_sched_change_event() is
redundant, remove it.

No functional change.

Fixes: 07235f84ec ("perf sched timehist: Add -I/--idle-hist option")
Reviewed-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240812132606.3126490-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03 15:44:22 -03:00
Yang Jihong
575eec2180 perf sched timehist: Skip print non-idle task samples when only show idle events
when only show idle events, runtime stats of non-idle tasks is not updated,
and the value is 0, there is no need to print non-idle samples.

Before:

  # perf sched timehist -I
  Samples of sched_switch event do not have callchains.
             time    cpu  task name                       wait time  sch delay   run time
                          [tid/pid]                          (msec)     (msec)     (msec)
  --------------- ------  ------------------------------  ---------  ---------  ---------
   2090450.763235 [0000]  migration/0[15]                     0.000      0.000      0.000
   2090450.763268 [0001]  migration/1[21]                     0.000      0.000      0.000
   2090450.763309 [0002]  migration/2[27]                     0.000      0.000      0.000
   2090450.763343 [0003]  migration/3[33]                     0.000      0.000      0.000
   2090450.763469 [0004]  migration/4[39]                     0.000      0.000      0.000
   2090450.763501 [0005]  migration/5[45]                     0.000      0.000      0.000
   2090450.763622 [0006]  migration/6[51]                     0.000      0.000      0.000
   2090450.763660 [0007]  migration/7[57]                     0.000      0.000      0.000
   2090450.763741 [0009]  migration/9[69]                     0.000      0.000      0.000
   2090450.763862 [0010]  migration/10[75]                    0.000      0.000      0.000
   2090450.763894 [0011]  migration/11[81]                    0.000      0.000      0.000
   2090450.764021 [0012]  migration/12[87]                    0.000      0.000      0.000
   2090450.764056 [0013]  migration/13[93]                    0.000      0.000      0.000
   2090450.764135 [0014]  migration/14[99]                    0.000      0.000      0.000
   2090450.764163 [0015]  migration/15[105]                   0.000      0.000      0.000
   2090450.764292 [0016]  migration/16[111]                   0.000      0.000      0.000
   2090450.764371 [0017]  migration/17[117]                   0.000      0.000      0.000
   2090450.764422 [0018]  migration/18[123]                   0.000      0.000      0.000
   2090450.764490 [0000]  <idle>                              0.000      0.000      1.255
   2090450.764505 [0000]  s1-perf[8235/7168]                  0.000      0.000      0.000
   2090450.764571 [0016]  <idle>                              0.000      0.000      0.278
   2090450.764588 [0010]  <idle>                              0.000      0.000      0.725
   2090450.764590 [0016]  s1-agent[7179/7162]                 0.000      0.000      0.000
   2090450.764635 [0000]  <idle>                              0.015      0.015      0.129
   2090450.764637 [0017]  <idle>                              0.000      0.000      0.266
   2090450.764639 [0000]  s1-perf[8235/7168]                  0.000      0.000      0.000
   2090450.764668 [0017]  s1-agent[7180/7162]                 0.000      0.000      0.000
   2090450.764669 [0000]  <idle>                              0.003      0.003      0.029
   2090450.764672 [0000]  s1-perf[8235/7168]                  0.000      0.000      0.000
   2090450.764683 [0000]  <idle>                              0.003      0.003      0.010

After:

  # perf sched timehist -I
  Samples of sched_switch event do not have callchains.
             time    cpu  task name                       wait time  sch delay   run time
                          [tid/pid]                          (msec)     (msec)     (msec)
  --------------- ------  ------------------------------  ---------  ---------  ---------
   2090450.764490 [0000]  <idle>                              0.000      0.000      1.255
   2090450.764571 [0016]  <idle>                              0.000      0.000      0.278
   2090450.764588 [0010]  <idle>                              0.000      0.000      0.725
   2090450.764635 [0000]  <idle>                              0.015      0.015      0.129
   2090450.764637 [0017]  <idle>                              0.000      0.000      0.266
   2090450.764669 [0000]  <idle>                              0.003      0.003      0.029
   2090450.764683 [0000]  <idle>                              0.003      0.003      0.010
   2090450.764688 [0016]  <idle>                              0.019      0.019      0.097
   2090450.764694 [0000]  <idle>                              0.001      0.001      0.009
   2090450.764706 [0000]  <idle>                              0.001      0.001      0.010
   2090450.764725 [0002]  <idle>                              0.000      0.000      1.415
   2090450.764728 [0000]  <idle>                              0.002      0.002      0.019
   2090450.764823 [0000]  <idle>                              0.003      0.003      0.091
   2090450.764838 [0019]  <idle>                              0.000      0.000      0.154
   2090450.764865 [0002]  <idle>                              0.109      0.109      0.029
   2090450.764866 [0000]  <idle>                              0.012      0.012      0.030
   2090450.764880 [0002]  <idle>                              0.013      0.013      0.001
   2090450.764880 [0000]  <idle>                              0.002      0.002      0.011
   2090450.764896 [0000]  <idle>                              0.001      0.001      0.013
   2090450.764903 [0019]  <idle>                              0.063      0.063      0.002
   2090450.764908 [0019]  <idle>                              0.003      0.003      0.001

Fixes: 07235f84ec ("perf sched timehist: Add -I/--idle-hist option")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240812132606.3126490-1-yangjihong@bytedance.com
Reviewed-and-tested-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-03 15:43:03 -03:00
Justin Iurman
1a5c486300 ioam6: improve checks on user data
This patch improves two checks on user data.

The first one prevents bit 23 from being set, as specified by RFC 9197
(Sec 4.4.1):

  Bit 23    Reserved; MUST be set to zero upon transmission and be
            ignored upon receipt.  This bit is reserved to allow for
            future extensions of the IOAM Trace-Type bit field.

The second one checks that the tunnel destination address !=
IPV6_ADDR_ANY, just like we already do for the tunnel source address.

Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20240830191919.51439-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03 11:38:32 -07:00
Oliver Neukum
bab8eb0dd4 usbnet: modern method to get random MAC
The driver generates a random MAC once on load
and uses it over and over, including on two devices
needing a random MAC at the same time.

Jakub suggested revamping the driver to the modern
API for setting a random MAC rather than fixing
the old stuff.

The bug is as old as the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-03 11:36:51 -07:00
Simon Horman
5872b47ce1 MAINTAINERS: wifi: cw1200: add net-cw1200.h
This is part of an effort [1] to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.

[1] https://lore.kernel.org/netdev/20240821-net-mnt-v2-0-59a5af38e69d@kernel.org/

It seems that net-cw1200.h is part of the CW1200 WLAN driver and
this it is appropriate to add it to the section for that driver.

Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240902-wifi-mnt-v2-1-f5ad1f36e993@kernel.org
2024-09-03 21:36:02 +03:00
Chen Yufan
97b766f989 wifi: mwifiex: Convert to use jiffies macro
Use time_after macro instead of using jiffies directly to handle wraparound.
Change the type to to unsigned long to avoid unnecessary casts.

Signed-off-by: Chen Yufan <chenyufan@vivo.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240823070320.430753-1-chenyufan@vivo.com
2024-09-03 21:31:24 +03:00
Marek Vasut
0c896eceb5 wifi: wilc1000: Re-enable RTC clock on resume
The wilc_sdio_suspend() does clk_disable_unprepare() on rtc_clk clock,
make sure wilc_sdio_resume() does matching clk_prepare_enable(), else
any suspend/resume cycle leads to clock disable/enable imbalance. Fix
the imbalance.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240821183717.163235-1-marex@denx.de
2024-09-03 21:31:01 +03:00
Marek Vasut
b0dc701847 wifi: wilc1000: Do not operate uninitialized hardware during suspend/resume
In case the hardware is not initialized, do not operate it during
suspend/resume cycle, the hardware is already off so there is no
reason to access it.

In fact, wilc_sdio_enable_interrupt() in the resume callback does
interfere with the same call when initializing the hardware after
resume and makes such initialization after resume fail. Fix this
by not operating uninitialized hardware during suspend/resume.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240821183639.163187-1-marex@denx.de
2024-09-03 21:30:18 +03:00
Filipe Manana
cd9253c23a btrfs: fix race between direct IO write and fsync when using same fd
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:

1) Attempt a fsync without holding the inode's lock, triggering an
   assertion failures when assertions are enabled;

2) Do an invalid memory access from the fsync task because the file private
   points to memory allocated on stack by the direct IO task and it may be
   used by the fsync task after the stack was destroyed.

The race happens like this:

1) A user space program opens a file descriptor with O_DIRECT;

2) The program spawns 2 threads using libpthread for example;

3) One of the threads uses the file descriptor to do direct IO writes,
   while the other calls fsync using the same file descriptor.

4) Call task A the thread doing direct IO writes and task B the thread
   doing fsyncs;

5) Task A does a direct IO write, and at btrfs_direct_write() sets the
   file's private to an on stack allocated private with the member
   'fsync_skip_inode_lock' set to true;

6) Task B enters btrfs_sync_file() and sees that there's a private
   structure associated to the file which has 'fsync_skip_inode_lock' set
   to true, so it skips locking the inode's VFS lock;

7) Task A completes the direct IO write, and resets the file's private to
   NULL since it had no prior private and our private was stack allocated.
   Then it unlocks the inode's VFS lock;

8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
   assertion that checks the inode's VFS lock is held fails, since task B
   never locked it and task A has already unlocked it.

The stack trace produced is the following:

   assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
   ------------[ cut here ]------------
   kernel BUG at fs/btrfs/ordered-data.c:983!
   Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
   CPU: 9 PID: 5072 Comm: worker Tainted: G     U     OE      6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
   Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
   RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
   Code: 50 d6 86 c0 e8 (...)
   RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
   RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
   RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
   RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
   R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
   R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
   FS:  00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
   Call Trace:
    <TASK>
    ? __die_body.cold+0x14/0x24
    ? die+0x2e/0x50
    ? do_trap+0xca/0x110
    ? do_error_trap+0x6a/0x90
    ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    ? exc_invalid_op+0x50/0x70
    ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    ? asm_exc_invalid_op+0x1a/0x20
    ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    ? __seccomp_filter+0x31d/0x4f0
    __x64_sys_fdatasync+0x4f/0x90
    do_syscall_64+0x82/0x160
    ? do_futex+0xcb/0x190
    ? __x64_sys_futex+0x10e/0x1d0
    ? switch_fpu_return+0x4f/0xd0
    ? syscall_exit_to_user_mode+0x72/0x220
    ? do_syscall_64+0x8e/0x160
    ? syscall_exit_to_user_mode+0x72/0x220
    ? do_syscall_64+0x8e/0x160
    ? syscall_exit_to_user_mode+0x72/0x220
    ? do_syscall_64+0x8e/0x160
    ? syscall_exit_to_user_mode+0x72/0x220
    ? do_syscall_64+0x8e/0x160
    entry_SYSCALL_64_after_hwframe+0x76/0x7e

Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.

This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.

Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.

The following C program triggers the issue:

   $ cat repro.c
   /* Get the O_DIRECT definition. */
   #ifndef _GNU_SOURCE
   #define _GNU_SOURCE
   #endif

   #include <stdio.h>
   #include <stdlib.h>
   #include <unistd.h>
   #include <stdint.h>
   #include <fcntl.h>
   #include <errno.h>
   #include <string.h>
   #include <pthread.h>

   static int fd;

   static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
   {
       while (count > 0) {
           ssize_t ret;

           ret = pwrite(fd, buf, count, offset);
           if (ret < 0) {
               if (errno == EINTR)
                   continue;
               return ret;
           }
           count -= ret;
           buf += ret;
       }
       return 0;
   }

   static void *fsync_loop(void *arg)
   {
       while (1) {
           int ret;

           ret = fsync(fd);
           if (ret != 0) {
               perror("Fsync failed");
               exit(6);
           }
       }
   }

   int main(int argc, char *argv[])
   {
       long pagesize;
       void *write_buf;
       pthread_t fsyncer;
       int ret;

       if (argc != 2) {
           fprintf(stderr, "Use: %s <file path>\n", argv[0]);
           return 1;
       }

       fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
       if (fd == -1) {
           perror("Failed to open/create file");
           return 1;
       }

       pagesize = sysconf(_SC_PAGE_SIZE);
       if (pagesize == -1) {
           perror("Failed to get page size");
           return 2;
       }

       ret = posix_memalign(&write_buf, pagesize, pagesize);
       if (ret) {
           perror("Failed to allocate buffer");
           return 3;
       }

       ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
       if (ret != 0) {
           fprintf(stderr, "Failed to create writer thread: %d\n", ret);
           return 4;
       }

       while (1) {
           ret = do_write(fd, write_buf, pagesize, 0);
           if (ret != 0) {
               perror("Write failed");
               exit(5);
           }
       }

       return 0;
   }

   $ mkfs.btrfs -f /dev/sdi
   $ mount /dev/sdi /mnt/sdi
   $ timeout 10 ./repro /mnt/sdi/foo

Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.

Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <jahn-andi@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/
Fixes: 939b656bc8 ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2024-09-03 20:29:55 +02:00
Jinjie Ruan
d38792292b wifi: brcmsmac: Use kvmemdup to simplify the code
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.

No functional change.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240821070257.2298559-1-ruanjinjie@huawei.com
2024-09-03 21:29:48 +03:00
Frank Li
25f8554138 dt-bindings: net: wireless: convert marvel-8xxx.txt to yaml format
Convert binding doc marvel-8xxx.txt to yaml format.
Additional change:
- Remove marvell,caldata_00_txpwrlimit_2g_cfg_set in example.
- Remove mmc related property in example.
- Add wakeup-source property.
- Remove vmmc-supply and mmc-pwrseq.

Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dtb: /soc@0/bus@30800000/mmc@30b40000/wifi@1:
failed to match any schema with compatible: ['marvell,sd8997']

Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240820142143.443151-1-Frank.Li@nxp.com
2024-09-03 21:28:21 +03:00
Théo Lebrun
b8600b8791
PCI: j721e: Add reset GPIO to struct j721e_pcie
Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
resume stages.

Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-4-a2f9156da6c3@bootlin.com
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-03 18:27:16 +00:00
Thomas Richard
7d7ce746a9
PCI: j721e: Use dev_err_probe() in the probe() function
Use dev_err_probe() instead of dev_err() in the probe() function to
simplify the code and standardize the error output.

Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-3-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-09-03 18:27:15 +00:00
Thomas Richard
063c938928
PCI: cadence: Set cdns_pcie_host_init() global
During the resume sequence of the host, cdns_pcie_host_init() needs to be
called, so set it global.

The dev function parameter is removed, as it isn't used.

Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-2-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-09-03 18:27:14 +00:00
Thomas Richard
d1b6f2e2ce
PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup()
The function cdns_pcie_host_setup() mixes probe structure and link setup.

The link setup must be done during the resume sequence. So extract it from
cdns_pcie_host_setup() and create a dedicated function.

Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-1-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-09-03 18:27:12 +00:00
Simona Vetter
e066e9aa4d MAINATINERS: update drm maintainer contacts
Also fix a few places in gpu docs that are still relevant, and add a
bunch of .mailmap entries.

Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
2024-09-03 20:07:57 +02:00
Thomas Bonnefille
cf082dbeda dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
The Sophgo CV1800B SARADC is a Successive Approximation ADC that can be
found in the Sophgo CV1800B SoC.

Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240829-sg2002-adc-v5-1-aacb381e869b@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Zhu Jun
3c6b818b09 tools/iio: Add memory allocation failure check for trigger_name
Added a check to handle memory allocation failure for `trigger_name`
and return `-ENOMEM`.

Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240828093129.3040-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Andy Shevchenko
da83fd152e iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
The device property APIs designed that way that they will return an error when
there is no valid fwnode provided. Moreover, the check for NULL of dev_fwnode()
is not fully correct as in some (currently rare) cases it may contain an error
pointer. This is not a problem anyway (see keyword 'valid' above) that's why
the code works properly even without this change.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240826212344.866928-3-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Andy Shevchenko
17601ab9d7 iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
Replace the duplicate ACPI "ROTM" data parsing code with the new
shared iio_read_acpi_mount_matrix() helper.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240826212344.866928-2-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Rob Herring (Arm)
2f1dddc922 iio: adc: mcp320x: Drop vendorless compatible strings
The vendorless compatible strings are deprecated and weren't retained
when the binding was converted to schema. As a result, they are listed
as undocumented when running "make dt_compatible_check". Rather than add
them back to the schema, let's just drop them as they are unnecessary.
Furthermore, they are unnecessary as the SPI matching will strip the
vendor prefix on compatible string and match that against the
spi_device_id table.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240826191728.1415189-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Bartosz Golaszewski
631598c419 iio: dac: ad5449: drop support for platform data
There are no longer any users of the platform data struct. Remove
support for it from the driver.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240814092629.9862-1-brgl@bgdev.pl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Javier Carrasco
31c022a4f4 iio: adc: xilinx-ams: use device_* to iterate over device child nodes
Use `device_for_each_child_node_scoped()` in `ams_parse_firmware()`
to explicitly state device child node access, and simplify the child
node handling as it is not required outside the loop.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://patch.msgid.link/20240820-device_child_node_access-v3-1-1ee09bdedb9e@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
David Lechner
192be24574 iio: ABI: document ad4695 new attributes
The ad4695 driver now supports calibration using the
in_voltageY_calib{scale,bias}[_available] attributes.

Only one of these was documented before. This adds rest.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-4-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
David Lechner
b5fe2f7bac doc: iio: ad4695: update for calibration support
Calibration support has been added to the ad4695 driver, so update the
documentation to reflect this.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-3-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
David Lechner
7763e40f35 iio: adc: ad4695: implement calibration support
The AD4695 has a calibration feature that allows the user to compensate
for variations in the analog front end. This implements this feature in
the driver using the standard `calibgain` and `calibbias` attributes.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-2-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
David Lechner
2ba49fc41b iio: adc: ad4695: add 2nd regmap for 16-bit registers
The AD4695 and similar chips have some multibyte registers that have
to be read/written in a single operation. So we need to add a 2nd regmap
for these registers.

These registers are removed from the 8-bit regmap allowable ranges and
AD4695_MAX_REG is dropped since it would be ambiguous now.

debugfs register access is also updated to automatically use the correct
regmap depending on the register address.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-1-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Denis Benato
16531118ba iio: bmi323: peripheral in lowest power state on suspend
The bmi323 is mounted on some devices that are powered
by an internal battery: help in reducing system overall power drain
while the system is in s2idle or the imu driver is not loaded
by resetting it in its lowest power draining state.

Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20240824141122.334620-2-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Andy Shevchenko
525e9cd5ac iio: accel: bmc150: Improve bmc150_apply_bosc0200_acpi_orientation()
By using ACPI_HANDLE() the handler argument can be retrieved directly.
Replace ACPI_COMPANION() + dereference with ACPI_HANDLE().

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240823230107.745900-1-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Andy Shevchenko
3f131813d7 iio: accel: bmc150: use fwnode_irq_get_byname()
Use the generic fwnode_irq_get_byname() in place of of_irq_get_byname()
to get the IRQ number from the interrupt pin.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240823230056.745872-1-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Andy Shevchenko
dae65fc2bc iio: proximity: cros_ec_mkbp_proximity: Switch to including mod_devicetable.h for struct of_device_id definition
of.h was only included for this definition, so include the correct header
instead.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240823220718.743596-1-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Danila Tikhonov
89cf93bfb3 iio: magnetometer: ak8975: Add AK09118 support
Add additional AK09118 to the magnetometer driver which has the same
register mapping and scaling as the AK09112 device.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://patch.msgid.link/20240819-ak09918-v4-4-f0734d14cfb9@mainlining.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Danila Tikhonov
c19bf7faea dt-bindings: iio: magnetometer: Add ak09118
Document asahi-kasei,ak09918 compatible as a fallback compatible,
ak09918 is register compatible with ak09912.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240819-ak09918-v4-3-f0734d14cfb9@mainlining.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Barnabás Czémán
129464e86c iio: magnetometer: ak8975: Fix reading for ak099xx sensors
Move ST2 reading with overflow handling after measurement data
reading.
ST2 register read have to be read after read measurment data,
because it means end of the reading and realease the lock on the data.
Remove ST2 read skip on interrupt based waiting because ST2 required to
be read out at and of the axis read.

Fixes: 57e73a423b ("iio: ak8975: add ak09911 and ak09912 support")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://patch.msgid.link/20240819-ak09918-v4-2-f0734d14cfb9@mainlining.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Barnabás Czémán
3b92fc43bf iio: magnetometer: ak8975: Relax failure on unknown id
Relax failure when driver gets an unknown device id for
allow probe for register compatible devices.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://patch.msgid.link/20240819-ak09918-v4-1-f0734d14cfb9@mainlining.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:42 +01:00
Abhinav Jain
b4bcdff7e8 selftests: filesystems: fix warn_unused_result build warnings
Add return value checks for read & write calls in test_listmount_ns
function. This patch resolves below compilation warnings:

```
statmount_test_ns.c: In function ‘test_listmount_ns’:

statmount_test_ns.c:322:17: warning: ignoring return value of ‘write’
declared with attribute ‘warn_unused_result’ [-Wunused-result]

statmount_test_ns.c:323:17: warning: ignoring return value of ‘read’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
```

Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-03 11:42:55 -06:00
Heikki Krogerus
87eb3cb4ec usb: typec: ucsi: Fix cable registration
The Cable PD Revision field in GET_CABLE_PROPERTY was
introduced in UCSI v2.1, so adding check for that.

The cable properties are also not used anywhere after the
cable is registered, so removing the cable_prop member
from struct ucsi_connector while at it.

Fixes: 38ca416597 ("usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240903130945.3395291-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03 19:26:18 +02:00
Jens Axboe
761e5afb6d MAINTAINERS: move the BFQ io scheduler to orphan state
Nobody is maintaining this code, and it just falls under the umbrella
of block layer code. But at least mark it as such, in case anyone wants
to care more deeply about it and assume the responsibility of doing so.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-03 11:22:27 -06:00
Alexandre Mergnat
e1991d102b
ASoC: mediatek: mt8365: Add the AFE driver support
Add a driver for the Audio Front End (AFE) PCM to provide Audio
Uplink (UL) and Downlink (DL) paths.
Use the ALSA SoC Dynamic Audio Power Management to add widget and
kcontrol supports.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-11-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:29 +01:00
Nicolas Belin
1bf6dbd75f
ASoc: mediatek: mt8365: Add a specific soundcard for EVK
Add a specific soundcard for mt8365-evk. It supports audio jack
in/out, dmics, the amic and lineout.

Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-10-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:28 +01:00
Alexandre Mergnat
5097c0c863
ASoC: mediatek: mt8365: Add PCM DAI support
Add Pulse Code Modulation Device Audio Interface support for MT8365 SoC.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-9-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:27 +01:00
Alexandre Mergnat
1c50ec75ce
ASoC: mediatek: mt8365: Add DMIC DAI support
Add Digital Micro Device Audio Interface support for MT8365 SoC.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-8-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:26 +01:00
Alexandre Mergnat
7c58c88e52
ASoC: mediatek: mt8365: Add ADDA DAI support
Add ADDA Device Audio Interface support for MT8365 SoC.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-7-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:25 +01:00
Alexandre Mergnat
402bbb13a1
ASoC: mediatek: mt8365: Add I2S DAI support
Add I2S Device Audio Interface support for MT8365 SoC.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-6-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:24 +01:00
Alexandre Mergnat
ef307b40b7
ASoC: mediatek: mt8365: Add audio clock control support
Add audio clock wrapper and audio tuner control.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-5-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:24 +01:00