[ Upstream commit 3b96b89512 ]
Some computers with CPUs that lack Thunderbolt features use discrete
Thunderbolt chips to add Thunderbolt functionality. These Thunderbolt
chips are located within the chassis; between the Root Port labeled
ExternalFacingPort and the USB-C port.
These Thunderbolt PCIe devices should be labeled as fixed and trusted, as
they are built into the computer. Otherwise, security policies that rely on
those flags may have unintended results, such as preventing USB-C ports
from enumerating.
Detect the above scenario through the process of elimination.
1) Integrated Thunderbolt host controllers already have Thunderbolt
implemented, so anything outside their external facing Root Port is
removable and untrusted.
Detect them using the following properties:
- Most integrated host controllers have the "usb4-host-interface"
ACPI property, as described here:
https://learn.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#mapping-native-protocols-pcie-displayport-tunneled-through-usb4-to-usb4-host-routers
- Integrated Thunderbolt PCIe Root Ports before Alder Lake do not
have the "usb4-host-interface" ACPI property. Identify those by
their PCI IDs instead.
2) If a Root Port does not have integrated Thunderbolt capabilities, but
has the "ExternalFacingPort" ACPI property, that means the
manufacturer has opted to use a discrete Thunderbolt host controller
that is built into the computer.
This host controller can be identified by virtue of being located
directly below an external-facing Root Port that lacks integrated
Thunderbolt. Label it as trusted and fixed.
Everything downstream from it is untrusted and removable.
The "ExternalFacingPort" ACPI property is described here:
https://learn.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports
Link: https://lore.kernel.org/r/20240910-trust-tbt-fix-v5-1-7a7a42a5f496@chromium.org
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Esther Shimanovich <eshimanovich@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78bc671bd1 ]
Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with
ufs_hba_variant_ops::set_dma_mask. Update the Renesas driver
accordingly. This patch enables supporting other configurations than
32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13d750c2c0 ]
In preparation for allowing system call enter/exit instrumentation to
handle page faults, make sure that ftrace can handle this change by
explicitly disabling preemption within the ftrace system call tracepoint
probes to respect the current expectations within ftrace ring buffer
code.
This change does not yet allow ftrace to take page faults per se within
its probe, but allows its existing probes to adapt to the upcoming
change.
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: https://lore.kernel.org/20241009010718.2050182-3-mathieu.desnoyers@efficios.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 522249f05c ]
When working in "fd mode", fanotify_read() needs to open an fd
from a dentry to report event->fd to userspace.
Opening an fd from dentry can fail for several reasons.
For example, when tasks are gone and we try to open their
/proc files or we try to open a WRONLY file like in sysfs
or when trying to open a file that was deleted on the
remote network server.
Add a new flag FAN_REPORT_FD_ERROR for fanotify_init().
For a group with FAN_REPORT_FD_ERROR, we will send the
event with the error instead of the open fd, otherwise
userspace may not get the error at all.
For an overflow event, we report -EBADF to avoid confusing FAN_NOFD
with -EPERM. Similarly for pidfd open errors we report either -ESRCH
or the open error instead of FAN_NOPIDFD and FAN_EPIDFD.
In any case, userspace will not know which file failed to
open, so add a debug print for further investigation.
Reported-by: Krishna Vivek Vitta <kvitta@microsoft.com>
Link: https://lore.kernel.org/linux-fsdevel/SI2P153MB07182F3424619EDDD1F393EED46D2@SI2P153MB0718.APCP153.PROD.OUTLOOK.COM/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241003142922.111539-1-amir73il@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd068d5159 ]
GIGASTONE Gaming Plus microSD cards manufactured on 02/2022 report that
they support poweroff notification and cache, but they are not working
correctly.
Flush Cache bit never gets cleared in sd_flush_cache() and Poweroff
Notification Ready bit also never gets set to 1 within 1 second from the
end of busy of CMD49 in sd_poweroff_notify().
This leads to I/O error and runtime PM error state.
I observed that the same card manufactured on 01/2024 works as expected.
This problem seems similar to the Kingston cards fixed with
commit c467c8f081 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston
Canvas Go Plus from 11/2019") and should be handled using quirks.
CID for the problematic card is here.
12345641535443002000000145016200
Manufacturer ID is 0x12 and defined as CID_MANFID_GIGASTONE as of now,
but would like comments on what naming is appropriate because MID list
is not public and not sure it's right.
Signed-off-by: Keita Aihara <keita.aihara@sony.com>
Link: https://lore.kernel.org/r/20240913094417.GA4191647@sony.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 645c224ac5 ]
We already have the possibility to force not binding to hid-generic and
rely on a dedicated driver, but we couldn't do the other way around.
This is useful for BPF programs where we are fixing the report descriptor
and the events, but want to avoid a specialized driver to come after BPF
which would unwind everything that is done there.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20241001-hid-bpf-hid-generic-v3-8-2ef1019468df@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a6fa67d26d upstream.
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bb ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f45ed5f0c upstream.
When the power mode change is successful but the power mode hasn't
actually changed, the post notification was missed. Similar to the
approach with hibernate/clock scale/hce enable, having pre/post
notifications in the same function will make it easier to maintain.
Additionally, supplement the description of power parameters for the
pwr_change_notify callback.
Fixes: 7eb584db73 ("ufs: refactor configuring power mode")
Cc: stable@vger.kernel.org #6.11.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d89c8ec054 ]
Fix a kernel-doc warning by making the kernel-doc function description
match the function name:
include/linux/scatterlist.h:323: warning: expecting prototype for sg_unmark_bus_address(). Prototype was for sg_dma_unmark_bus_address() instead
Link: https://lkml.kernel.org/r/20241130022406.537973-1-rdunlap@infradead.org
Fixes: 4239930120 ("lib/scatterlist: add flag for indicating P2PDMA segments in an SGL")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0642a3c5ca ]
We had a nice name scheme in ALSA sequencer UMP binding for each
sequencer port referring to each assigned Function Block name, while
the legacy rawmidi refers only to the UMP Endpoint name. It's better
to align both.
This patch moves the UMP Group attribute update functions into the
core UMP code from the sequencer binding code, and improve the
substream name of the legacy rawmidi.
Link: https://patch.msgid.link/20240729141315.18253-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: aaa55faa24 ("ALSA: seq: ump: Fix seq port updates per FB info notify")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f552fa280 ]
Extend the address status bit to 4 and introduce the
I3C_ADDR_SLOT_EXT_DESIRED macro to indicate that a device prefers a
specific address. This is generally set by the 'assigned-address' in the
device tree source (dts) file.
┌────┬─────────────┬───┬─────────┬───┐
│S/Sr│ 7'h7E RnW=0 │ACK│ ENTDAA │ T ├────┐
└────┴─────────────┴───┴─────────┴───┘ │
┌─────────────────────────────────────────┘
│ ┌──┬─────────────┬───┬─────────────────┬────────────────┬───┬─────────┐
└─►│Sr│7'h7E RnW=1 │ACK│48bit UID BCR DCR│Assign 7bit Addr│PAR│ ACK/NACK│
└──┴─────────────┴───┴─────────────────┴────────────────┴───┴─────────┘
Some master controllers (such as HCI) need to prepare the entire above
transaction before sending it out to the I3C bus. This means that a 7-bit
dynamic address needs to be allocated before knowing the target device's
UID information.
However, some I3C targets may request specific addresses (called as
"init_dyn_addr"), which is typically specified by the DT-'s
assigned-address property. Lower addresses having higher IBI priority. If
it is available, i3c_bus_get_free_addr() preferably return a free address
that is not in the list of desired addresses (called as "init_dyn_addr").
This allows the device with the "init_dyn_addr" to switch to its
"init_dyn_addr" when it hot-joins the I3C bus. Otherwise, if the
"init_dyn_addr" is already in use by another I3C device, the target device
will not be able to switch to its desired address.
If the previous step fails, fallback returning one of the remaining
unassigned address, regardless of its state in the desired list.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-2-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 851bd21cdb ("i3c: master: Fix dynamic address leak when 'assigned-address' is present")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16aed0a652 ]
Replace the hardcoded value 2, which indicates 2 bits for I3C address
status, with the predefined macro I3C_ADDR_SLOT_STATUS_BITS.
Improve maintainability and extensibility of the code.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-1-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 851bd21cdb ("i3c: master: Fix dynamic address leak when 'assigned-address' is present")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aef79e189b ]
According to I3C spec 6.2 Timing Specification, the Open Drain High Period
of SCL Clock timing for first broadcast address should be adjusted to 200ns
at least. I3C device working as i2c device will see the broadcast to close
its Spike Filter then change to work at I3C mode. After that I3C open drain
SCL high level should be adjusted back.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240910051626.4052552-1-carlos.song@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 25bc99be5f ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34d946b723 ]
Fix warning found by
'scripts/kernel-doc -v -none include/linux/i3c/master.h'
include/linux/i3c/master.h:457: warning: Function parameter or member 'enable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:457: warning: Function parameter or member 'disable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:499: warning: Function parameter or member 'hotjoin' not described in 'i3c_master_controller'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240109052548.2128133-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 25bc99be5f ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 317bacf960 ]
Add hotjoin entry in sys file system allow user enable/disable hotjoin
feature.
Add (*enable(disable)_hotjoin)() to i3c_master_controller_ops.
Add api i3c_master_enable(disable)_hotjoin();
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231201222532.2431484-2-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 25bc99be5f ("i3c: master: svc: Modify enabled_events bit 7:0 to act as IBI enable counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7e1241d8f ]
A fwnode link between specific supplier-consumer fwnodes can be added
multiple times for multiple reasons. If that dependency doesn't exist,
deleting the fwnode link once doesn't guarantee that it won't get created
again.
So, add FWLINK_FLAG_IGNORE flag to mark a fwnode link as one that needs to
be completely ignored. Since a fwnode link's flags is an OR of all the
flags passed to all the fwnode_link_add() calls to create that specific
fwnode link, the FWLINK_FLAG_IGNORE flag is preserved and can be used to
mark a fwnode link as on that need to be completely ignored until it is
deleted.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305050458.1400667-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: bac3b10b78 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b1d83da25 ]
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4398888268 ]
In some scenarios using Emulated-ISM device, sndbuf can share the same
physical memory region with peer DMB to avoid data copy from one side
to the other. In such case the sndbuf is only a descriptor that
describes the shared memory and does not actually occupy memory, it's
more like a ghost buffer.
+----------+ +----------+
| socket A | | socket B |
+----------+ +----------+
| |
+--------+ +--------+
| sndbuf | | DMB |
| desc | | desc |
+--------+ +--------+
| |
| +----v-----+
+--------------------------> memory |
+----------+
So here introduces three new SMC-D device operations to check if this
feature is supported by device, and to {attach|detach} ghost sndbuf to
peer DMB. For now only loopback-ism supports this.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 0541db8ee3 ("net/smc: initialize close_work early to avoid warning")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1d8d0b6c7 ]
Some operations are not supported by new introduced Emulated-ISM, so
mark them as optional and check if the device supports them when called.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 0541db8ee3 ("net/smc: initialize close_work early to avoid warning")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40584d145 ]
According to virtual ISM support feature defined by SMCv2.1, GIDs of
virtual ISM device are UUIDs defined by RFC4122, which are 128-bits
long. So some adaptation work is required. And note that the GIDs of
existing platform firmware ISM devices still remain 64-bits long.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 0541db8ee3 ("net/smc: initialize close_work early to avoid warning")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcbfcebda2 ]
Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK
to adjust power limits.
These fan profiles have a different device id than the ROG series
and different order. This reorders the existing modes.
As part of keeping the patch clean the throttle_thermal_policy_available
boolean stored in the driver struct is removed and
throttle_thermal_policy_dev is used in place (as on init it is zeroed).
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Mohamed Ghanmi <mohamed.ghanmi@supcom.tn>
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240609144849.2532-2-mohamed.ghanmi@supcom.tn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: 25fb5f47f3 ("platform/x86: asus-wmi: Ignore return value when writing thermal policy")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bc73b41867 upstream.
A bug was found in the find_closest() (find_closest_descending() is also
affected after some testing), where for certain values with small
progressions, the rounding (done by averaging 2 values) causes an
incorrect index to be returned. The rounding issues occur for
progressions of 1, 2 and 3. It goes away when the progression/interval
between two values is 4 or larger.
It's particularly bad for progressions of 1. For example if there's an
array of 'a = { 1, 2, 3 }', using 'find_closest(2, a ...)' would return 0
(the index of '1'), rather than returning 1 (the index of '2'). This
means that for exact values (with a progression of 1), find_closest() will
misbehave and return the index of the value smaller than the one we're
searching for.
For progressions of 2 and 3, the exact values are obtained correctly; but
values aren't approximated correctly (as one would expect). Starting with
progressions of 4, all seems to be good (one gets what one would expect).
While one could argue that 'find_closest()' should not be used for arrays
with progressions of 1 (i.e. '{1, 2, 3, ...}', the macro should still
behave correctly.
The bug was found while testing the 'drivers/iio/adc/ad7606.c',
specifically the oversampling feature.
For reference, the oversampling values are listed as:
static const unsigned int ad7606_oversampling_avail[7] = {
1, 2, 4, 8, 16, 32, 64,
};
When doing:
1. $ echo 1 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
1 # this is fine
2. $ echo 2 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
1 # this is wrong; 2 should be returned here
3. $ echo 3 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
2 # this is fine
4. $ echo 4 > /sys/bus/iio/devices/iio\:device0/oversampling_ratio
$ cat /sys/bus/iio/devices/iio\:device0/oversampling_ratio
4 # this is fine
And from here-on, the values are as correct (one gets what one would
expect.)
While writing a kunit test for this bug, a peculiar issue was found for the
array in the 'drivers/hwmon/ina2xx.c' & 'drivers/iio/adc/ina2xx-adc.c'
drivers. While running the kunit test (for 'ina226_avg_tab' from these
drivers):
* idx = find_closest([-1 to 2], ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab));
This returns idx == 0, so value.
* idx = find_closest(3, ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab));
This returns idx == 0, value 1; and now one could argue whether 3 is
closer to 4 or to 1. This quirk only appears for value '3' in this
array, but it seems to be a another rounding issue.
* And from 4 onwards the 'find_closest'() works fine (one gets what one
would expect).
This change reworks the find_closest() macros to also check the difference
between the left and right elements when 'x'. If the distance to the right
is smaller (than the distance to the left), the index is incremented by 1.
This also makes redundant the need for using the DIV_ROUND_CLOSEST() macro.
In order to accommodate for any mix of negative + positive values, the
internal variables '__fc_x', '__fc_mid_x', '__fc_left' & '__fc_right' are
forced to 'long' type. This also addresses any potential bugs/issues with
'x' being of an unsigned type. In those situations any comparison between
signed & unsigned would be promoted to a comparison between 2 unsigned
numbers; this is especially annoying when '__fc_left' & '__fc_right'
underflow.
The find_closest_descending() macro was also reworked and duplicated from
the find_closest(), and it is being iterated in reverse. The main reason
for this is to get the same indices as 'find_closest()' (but in reverse).
The comparison for '__fc_right < __fc_left' favors going the array in
ascending order.
For example for array '{ 1024, 512, 256, 128, 64, 16, 4, 1 }' and x = 3, we
get:
__fc_mid_x = 2
__fc_left = -1
__fc_right = -2
Then '__fc_right < __fc_left' evaluates to true and '__fc_i++' becomes 7
which is not quite incorrect, but 3 is closer to 4 than to 1.
This change has been validated with the kunit from the next patch.
Link: https://lkml.kernel.org/r/20241105145406.554365-1-aardelean@baylibre.com
Fixes: 95d119528b ("util_macros.h: add find_closest() macro")
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dbefa1f31a ]
Commit b1fca27d38 ("kernel debug: support resetting WARN*_ONCE")
added support for clearing the state of once warnings. However,
it is not functional when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION or
CONFIG_LTO_CLANG is enabled, because .data.once matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.
Commit cb87481ee8 ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee8. [1]
Seven years have passed since then, yet the #ifdef workaround remains in
place. Meanwhile, commit b1fca27d38 introduced the .data.once section,
and commit dc5723b02e ("kbuild: add support for Clang LTO") extended
the #ifdef.
Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/
Fixes: b1fca27d38 ("kernel debug: support resetting WARN*_ONCE")
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb43a59944 ]
Commit 7ccaba5314 ("consolidate WARN_...ONCE() static variables")
was intended to collect all .data.unlikely sections into one chunk.
However, this has not worked when CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
or CONFIG_LTO_CLANG is enabled, because .data.unlikely matches the
.data.[0-9a-zA-Z_]* pattern in the DATA_MAIN macro.
Commit cb87481ee8 ("kbuild: linker script do not match C names unless
LD_DEAD_CODE_DATA_ELIMINATION is configured") was introduced to suppress
the issue for the default CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=n case,
providing a minimal fix for stable backporting. We were aware this did
not address the issue for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y. The
plan was to apply correct fixes and then revert cb87481ee8. [1]
Seven years have passed since then, yet the #ifdef workaround remains in
place.
Using a ".." separator in the section name fixes the issue for
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION and CONFIG_LTO_CLANG.
[1]: https://lore.kernel.org/linux-kbuild/CAK7LNASck6BfdLnESxXUeECYL26yUDm0cwRZuM4gmaWUkxjL5g@mail.gmail.com/
Fixes: cb87481ee8 ("kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73db3abdca ]
This reverts commit eb8f689046 ("Use separate sections for __dev/
_cpu/__mem code/data").
Check section mismatch to __meminit* only when CONFIG_MEMORY_HOTPLUG=n.
With this change, the linker script and modpost become simpler, and we
can get rid of the __ref annotations from the memory hotplug code.
[sfr@canb.auug.org.au: remove MEM_KEEP from arch/powerpc/kernel/vmlinux.lds.S]
Link: https://lkml.kernel.org/r/20240710093213.2aefb25f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20240706160511.2331061-2-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: bb43a59944 ("Rename .data.unlikely to .data..unlikely")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46fd48ab3e ]
The underlying limit is defined as an unsigned int, so return that from
bdev_io_min as well.
Fixes: ac481c20ef ("block: Topology ioctls")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241119072602.1059488-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9f070b1862 upstream.
The v4l2_detect_cvt/gtf functions should check the result against the
timing capabilities: these functions calculate the timings, so if they
are out of bounds, they should be rejected.
To do this, add the struct v4l2_dv_timings_cap as argument to those
functions.
This required updates to the adv7604 and adv7842 drivers since the
prototype of these functions has now changed. The timings struct
that is passed to v4l2_detect_cvt/gtf in those two drivers is filled
with the timings detected by the hardware.
The vivid driver was also updated, but an additional check was added:
the width and height specified by VIDIOC_S_DV_TIMINGS has to match the
calculated result, otherwise something went wrong. Note that vivid
*emulates* hardware, so all the values passed to the v4l2_detect_cvt/gtf
functions came from the timings struct that was filled by userspace
and passed on to the driver via VIDIOC_S_DV_TIMINGS. So these fields
can contain random data. Both the constraints check via
struct v4l2_dv_timings_cap and the additional width/height check
ensure that the resulting timings are sane and not messed up by the
v4l2_detect_cvt/gtf calculations.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: 2576415846 ("[media] v4l2: move dv-timings related code to v4l2-dv-timings.c")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a828133770f62293563e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-media/000000000000013050062127830a@google.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7fe143cb1 upstream.
Syzbot reports a problem that a warning will be triggered while
searching a lock class in look_up_lock_class().
The cause of the issue is that a new name is created and used by
lockdep_set_subclass() instead of using the existing one. This results
in a lock instance has a different name pointer than previous registered
one stored in lock class, and WARN_ONCE() is triggered because of that
in look_up_lock_class().
To fix this, change lockdep_set_subclass() to use the existing name
instead of a new one. Hence, no new name will be created by
lockdep_set_subclass(). Hence, the warning is avoided.
[boqun: Reword the commit log to state the correct issue]
Reported-by: <syzbot+7f4a6f7f7051474e40ad@syzkaller.appspotmail.com>
Fixes: de8f5e4f2d ("lockdep: Introduce wait-type checks")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Ehab <bottaawesome633@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/lkml/20240824221031.7751-1-bottaawesome633@gmail.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a57d5a72f8 ]
The ndev->npinfo pointer in netpoll_poll_lock() is RCU-protected but is
being accessed directly for a NULL check. While no RCU read lock is held
in this context, we should still use proper RCU primitives for
consistency and correctness.
Replace the direct NULL check with rcu_access_pointer(), which is the
appropriate primitive when only checking for NULL without dereferencing
the pointer. This function provides the necessary ordering guarantees
without requiring RCU read-side protection.
Fixes: bea3348eef ("[NET]: Make NAPI polling independent of struct net_device objects.")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20241118-netpoll_rcu-v1-2-a1888dcb4a02@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4cb4a1391 ]
Toke mentioned unrcu_pointer() existence, allowing
to remove some of the ugly casts we have when using
xchg() for rcu protected pointers.
Also make inet_rcv_compat const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240604111603.45871-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: eb02688c5c ("ipv6: release nexthop on device removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86e8921df0 ]
TCPDIAG_GETSOCK and DCCPDIAG_GETSOCK diag are serialized
on sock_diag_table_mutex.
This is to make sure inet_diag module is not unloaded
while diag was ongoing.
It is time to get rid of this mutex and use RCU protection,
allowing full parallelism.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: eb02688c5c ("ipv6: release nexthop on device removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 114b4bb1cc ]
Following patch is going to use RCU instead of
sock_diag_table_mutex acquisition.
This patch is a preparation, no change of behavior yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: eb02688c5c ("ipv6: release nexthop on device removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84bfbfbbd3 ]
This commit fix a typographical error in netlink nlmsg_type constants definition in the include/uapi/linux/rtnetlink.h at line 177. The definition is RTM_NEWNVLAN RTM_NEWVLAN instead of RTM_NEWVLAN RTM_NEWVLAN.
Signed-off-by: Maurice Lambert <mauricelambert434@gmail.com>
Fixes: 8dcea18708 ("net: bridge: vlan: add rtm definitions and dump support")
Link: https://patch.msgid.link/20241103223950.230300-1-mauricelambert434@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89de9921df ]
Some VFs may want to disable CRC stripping on incoming packets so create
an offload for that. The VF already sends information about configuring
its RX queues so use that structure to indicate that the CRC stripping
should be enabled or not.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: a884c304e1 ("ice: consistently use q_idx in ice_vc_cfg_qs_msg()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2473a3597 ]
__pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().
Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.
Reported-by: Breno Leitao <leitao@debian.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Fixes: ac10be5cdb ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 183ec5f26b ]
During testing of the preceding changes, I noticed that in some cases,
current->kcsan_ctx.in_flat_atomic remained true until task exit. This is
obviously wrong, because _all_ accesses for the given task will be
treated as atomic, resulting in false negatives i.e. missed data races.
Debugging led to fs/dcache.c, where we can see this usage of seqlock:
struct dentry *d_lookup(const struct dentry *parent, const struct qstr *name)
{
struct dentry *dentry;
unsigned seq;
do {
seq = read_seqbegin(&rename_lock);
dentry = __d_lookup(parent, name);
if (dentry)
break;
} while (read_seqretry(&rename_lock, seq));
[...]
As can be seen, read_seqretry() is never called if dentry != NULL;
consequently, current->kcsan_ctx.in_flat_atomic will never be reset to
false by read_seqretry().
Give up on the wrong assumption of "assume closing read_seqretry()", and
rely on the already-present annotations in read_seqcount_begin/retry().
Fixes: 88ecd153be ("seqlock, kcsan: Add annotations for KCSAN")
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241104161910.780003-6-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c1806c41c ]
While fuzzing an arm64 kernel, Alexander Potapenko reported:
| BUG: KCSAN: data-race in ktime_get_mono_fast_ns / timekeeping_update
|
| write to 0xffffffc082e74248 of 56 bytes by interrupt on cpu 0:
| update_fast_timekeeper kernel/time/timekeeping.c:430 [inline]
| timekeeping_update+0x1d8/0x2d8 kernel/time/timekeeping.c:768
| timekeeping_advance+0x9e8/0xb78 kernel/time/timekeeping.c:2344
| update_wall_time+0x18/0x38 kernel/time/timekeeping.c:2360
| [...]
|
| read to 0xffffffc082e74258 of 8 bytes by task 5260 on cpu 1:
| __ktime_get_fast_ns kernel/time/timekeeping.c:372 [inline]
| ktime_get_mono_fast_ns+0x88/0x174 kernel/time/timekeeping.c:489
| init_srcu_struct_fields+0x40c/0x530 kernel/rcu/srcutree.c:263
| init_srcu_struct+0x14/0x20 kernel/rcu/srcutree.c:311
| [...]
|
| value changed: 0x000002f875d33266 -> 0x000002f877416866
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 UID: 0 PID: 5260 Comm: syz.2.7483 Not tainted 6.12.0-rc3-dirty #78
This is a false positive data race between a seqcount latch writer and a reader
accessing stale data. Since its introduction, KCSAN has never understood the
seqcount_latch interface (due to being unannotated).
Unlike the regular seqlock interface, the seqcount_latch interface for latch
writers never has had a well-defined critical section, making it difficult to
teach tooling where the critical section starts and ends.
Introduce an instrumentable (non-raw) seqcount_latch interface, with
which we can clearly denote writer critical sections. This both helps
readability and tooling like KCSAN to understand when the writer is done
updating all latch copies.
Fixes: 88ecd153be ("seqlock, kcsan: Add annotations for KCSAN")
Reported-by: Alexander Potapenko <glider@google.com>
Co-developed-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241104161910.780003-4-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92b043fd99 ]
The details about the handling of the "normal" values were moved
to the _msecs_to_jiffies() helpers in commit ca42aaf0c8 ("time:
Refactor msecs_to_jiffies"). However, the same commit still mentioned
__msecs_to_jiffies() in the added documentation.
Thus point to _msecs_to_jiffies() instead.
Fixes: ca42aaf0c8 ("time: Refactor msecs_to_jiffies")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241025110141.157205-2-ojeda@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c418ba6bac ]
If an error indicating that the device needs to be reset is reported,
disable the error reporting before device reset is complete,
enable the error reporting after the reset is complete to prevent
the same error from being reported repeatedly.
Fixes: eaebf4c3b1 ("crypto: hisilicon - Unify hardware error init/uninit into QM")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41f6f64e69 ]
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57be3d3562 ]
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()`
helper to create a new tagged `struct ieee80211_radiotap_header_fixed`.
This structure groups together all the members of the flexible
`struct ieee80211_radiotap_header` except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct ieee80211_radiotap_header` to `struct
ieee80211_radiotap_header_fixed`.
We also want to ensure that in case new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct ieee80211_radiotap_header_fixed`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/ath/wil6210/txrx.c:309:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2100.c:2521:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2200.h:1146:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/libipw.h:595:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:34:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:5:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:10:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:15:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:758:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:767:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZwBMtBZKcrzwU7l4@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5baf8b037d ]
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0fb4a7ad27 ]
Refactor the map_deny_write_exec() to not unnecessarily require a VMA
parameter but rather to accept VMA flags parameters, which allows us to
use this function early in mmap_region() in a subsequent commit.
While we're here, we refactor the function to be more readable and add
some additional documentation.
Link: https://lkml.kernel.org/r/6be8bb59cd7c68006ebb006eb9d8dc27104b1f70.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 42f994b714 ]
DAMON-based operation schemes are applied for every aggregation interval.
That was mainly because schemes were using nr_accesses, which be complete
to be used for every aggregation interval. However, the schemes are now
using nr_accesses_bp, which is updated for each sampling interval in a way
that reasonable to be used. Therefore, there is no reason to apply
schemes for each aggregation interval.
The unnecessary alignment with aggregation interval was also making some
use cases of DAMOS tricky. Quotas setting under long aggregation interval
is one such example. Suppose the aggregation interval is ten seconds, and
there is a scheme having CPU quota 100ms per 1s. The scheme will actually
uses 100ms per ten seconds, since it cannobe be applied before next
aggregation interval. The feature is working as intended, but the results
might not that intuitive for some users. This could be fixed by updating
the quota to 1s per 10s. But, in the case, the CPU usage of DAMOS could
look like spikes, and would actually make a bad effect to other
CPU-sensitive workloads.
Implement a dedicated timing interval for each DAMON-based operation
scheme, namely apply_interval. The interval will be sampling interval
aligned, and each scheme will be applied for its apply_interval. The
interval is set to 0 by default, and it means the scheme should use the
aggregation interval instead. This avoids old users getting any
behavioral difference.
Link: https://lkml.kernel.org/r/20230916020945.47296-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 3488af0970 ("mm/damon/core: handle zero {aggregation,ops_update} intervals")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8eb36164d1 ]
Commit 4598380f9c ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
