In gmac_rx() (drivers/net/ethernet/cortina/gemini.c), when
gmac_get_queue_page() returns NULL for the second page of a multi-page
fragment, the driver logs an error and continues — but does not free the
partially assembled skb that was being assembled via napi_build_skb() /
napi_get_frags().
Free the in-progress partially assembled skb via napi_free_frags()
and increase the number of dropped frames appropriately
and assign the skb pointer NULL to make sure it is not lingering
around, matching the pattern already used elsewhere in the driver.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Andreas Haarmann-Thiemann <eitschman@nebelreich.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260505-gemini-ethernet-fix-v2-1-997c31d06079@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_get_child_by_name() takes a reference. The rtsn_reset() and
rtsn_change_mode() failure paths jump to out_free_bus and leak
mdio_node.
Add out_put_node to drop it before falling through.
Fixes: b0d3969d2b ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20260505123236.406000-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two issues with the way psp_dev is used in nsim_do_psp():
1. There is no check for IS_ERR() on the peers psp_dev, before
dereferencing.
2. The refcount on this psp_dev can be dropped by
nsim_psp_rereg_write()
To fix this, we can make netdevsim's reference to its psp_dev an rcu
reference, and then nsim_do_psp() can read the fields it needs from an
rcu critical section.
Fixes: f857478d62 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-3-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The debugfs write handler, nsim_psp_rereg_write(), can race against
nsim_destroy() and against itself, causing nsim_psp_uninit() to run
more than once concurrently. Two complementary changes serialize all
callers:
1. Delete the psp_rereg debugfs file from nsim_psp_uninit() before
doing the actual teardown. debugfs_remove() drains any in-flight
writers and prevents new ones from starting.
2. Add a mutex around the body of nsim_psp_rereg_write() so that two
concurrent userspace writers cannot both enter the teardown path
at once.
The teardown work itself is moved into a new __nsim_psp_uninit() that
the rereg handler calls under the mutex, while the public
nsim_psp_uninit() wraps it with the debugfs_remove()/mutex_destroy()
pair so nsim_destroy() doesn't have to know about the psp internals.
Fixes: f857478d62 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-2-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VFs go through nsim_init_netdevsim_vf() which never calls
nsim_psp_init(), so ns->psp.dev stays NULL. nsim_psp_uninit() guards
with !IS_ERR(ns->psp.dev), so destroying a VF reaches
psp_dev_unregister(NULL) and dereferences NULL on the first
mutex_lock(&psd->lock):
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:mutex_lock+0x1c/0x30
Call Trace:
psp_dev_unregister+0x2a/0x1a0
nsim_psp_uninit+0x1f/0x40 [netdevsim]
nsim_destroy+0x61/0x1e0 [netdevsim]
__nsim_dev_port_del+0x47/0x90 [netdevsim]
nsim_drv_configure_vfs+0xc9/0x130 [netdevsim]
nsim_bus_dev_numvfs_store+0x79/0xb0 [netdevsim]
Gate nsim_psp_uninit() on nsim_dev_port_is_pf(), matching the pattern
already used for nsim_exit_netdevsim() and the bpf/ipsec/macsec/queue
teardowns.
Reproducer:
modprobe netdevsim
echo "10 1" > /sys/bus/netdevsim/new_device
echo 1 > /sys/bus/netdevsim/devices/netdevsim10/sriov_numvfs
devlink dev eswitch set netdevsim/netdevsim10 mode switchdev
echo 0 > /sys/bus/netdevsim/devices/netdevsim10/sriov_numvfs
Fixes: f857478d62 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-1-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called with BH
disabled
* reduce ping count in selftest to ensure it completes within
timeout
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQKU153ubb5unbkl6Gx/ZpNW1HNdwUCafkekRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQsf2aTVtRzXdZAAEA2yDBkZdIiALO7V5ul5Ao
Y2/jFxysR5fyCMiOdxTOruwBAJaX9KExSE2QucHKOBFLmrjIIqwI5Br6whljdZKt
n1YE
=UhhZ
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Includes changes:
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called
with BH disabled
* reduce ping count in selftest to ensure it completes within
timeout
* tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: reduce ping count in test.sh
ovpn: ensure packet delivery happens with BH disabled
ovpn: reset MAC header before passing skb up
====================
Link: https://patch.msgid.link/20260504230305.2681646-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
-----BEGIN PGP SIGNATURE-----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=RBbh
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a number of fixes now:
- mac80211
- remove HT NSS validation to work with broken APs
(with a kunit fix now)
- remove 'static' that could cause races
- check station link lookup before further processing
- fix use-after-free due to delete in list iteration
- remove AP station on assoc failures to fix crashes
- ath12k
- fix OF node refcount imbalance
- fix queue flush ("REO update") in MLO
- fix RCU assert
- ath12k:
- fix Kconfig with POWER_SEQUENCING
- fix WMI buffer leaks on error conditions
- don't use uninitialized stack data when processing RSSI events
- fix logic for determining the peer ID in the RX path
- ath5k: fix a potential stack buffer overwrite
- rsi: fix thread lifetime race
- brcmfmac: fix potential UAF
- nl80211:
- stricter permissions/checks for PMK and netns
- fix netlink policy vs. code type confusion
- cw1200: revert a broken locking change
- various fixes to not trust values from firmware
* tag 'wireless-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (25 commits)
wifi: nl80211: re-check wiphy netns in nl80211_prepare_wdev_dump() continuation
wifi: nl80211: require CAP_NET_ADMIN over the target netns in SET_WIPHY_NETNS
wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage
wifi: mac80211: remove station if connection prep fails
wifi: mac80211: use safe list iteration in radar detect work
wifi: libertas: notify firmware load wait on disconnect
wifi: ath5k: do not access array OOB
wifi: ath12k: fix peer_id usage in normal RX path
wifi: ath12k: initialize RSSI dBm conversion event state
wifi: ath12k: fix leak in some ath12k_wmi_xxx() functions
wifi: cw1200: Revert "Fix locking in error paths"
wifi: mac80211: tests: mark HT check strict
wifi: rsi: fix kthread lifetime race between self-exit and external-stop
wifi: mac80211: drop stray 'static' from fast-RX rx_result
wifi: mac80211: check ieee80211_rx_data_set_link return in pubsta MLO path
wifi: nl80211: require admin perm on SET_PMK / DEL_PMK
wifi: libertas: fix integer underflow in process_cmdrequest()
wifi: b43legacy: enforce bounds check on firmware key index in RX path
wifi: b43: enforce bounds check on firmware key index in b43_rx()
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
...
====================
Link: https://patch.msgid.link/20260506110325.219675-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When utilizing Socket-Direct single netdev functionality the driver
resolves the actual auxiliary device using mlx5_sd_get_adev(). However,
the current implementation returns the primary ETH auxiliary device
without holding the device lock, leading to a potential race condition
where the ETH device could be unbound or removed concurrently during
probe, suspend, resume, or remove operations.[1]
Fix this by introducing mlx5_sd_put_adev() and updating
mlx5_sd_get_adev() so that secondaries devices would get a ref and
acquire the device lock of the returned auxiliary device. After the lock
is acquired, a second devcom check is needed[2].
In addition, update The callers to pair the get operation with the new
put operation, ensuring the lock is held while the auxiliary device is
being operated on and released afterwards.
The "primary" designation is determined once in sd_register(). It's set
before devcom is marked ready, and it never changes after that.
In Addition, The primary path never locks a secondary: When the primary
device invoke mlx5_sd_get_adev(), it sees dev == primary and returns.
no additional lock is taken.
Therefore lock ordering is always: secondary_lock -> primary_lock. The
reverse never happens, so ABBA deadlock is impossible.
[1]
for example:
BUG: kernel NULL pointer dereference, address: 0000000000000370
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 4 UID: 0 PID: 3945 Comm: bash Not tainted 6.19.0-rc3+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100 [mlx5_core]
Call Trace:
<TASK>
mlx5e_remove+0x82/0x12a [mlx5_core]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x140
device_del+0x159/0x3c0
? devl_param_driverinit_value_get+0x29/0x80
mlx5_rescan_drivers_locked+0x92/0x160 [mlx5_core]
mlx5_unregister_device+0x34/0x50 [mlx5_core]
mlx5_uninit_one+0x43/0xb0 [mlx5_core]
remove_one+0x4e/0xc0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0xe90
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
CPU0 (primary) CPU1 (secondary)
==========================================================================
mlx5e_remove() (device_lock held)
mlx5e_remove() (2nd device_lock held)
mlx5_sd_get_adev()
mlx5_devcom_comp_is_ready() => true
device_lock(primary)
mlx5_sd_get_adev() ==> ret adev
_mlx5e_remove()
mlx5_sd_cleanup()
// mlx5e_remove finished
// releasing device_lock
//need another check here...
mlx5_devcom_comp_is_ready() => false
Fixes: 381978d283 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When _mlx5e_probe() fails, the preceding successful mlx5_sd_init() is
not undone. Auxiliary bus probe failure skips binding, so mlx5e_remove()
is never called for that adev and the matching mlx5_sd_cleanup() never
runs - leaking the per-dev SD struct.
Call mlx5_sd_cleanup() on the probe error path to balance
mlx5_sd_init().
A similar gap exists on the resume path: mlx5_sd_init() and
mlx5_sd_cleanup() are currently bundled with both probe/remove and
suspend/resume, even though only the FW alias state actually needs to
follow the suspend/resume lifecycle - the sd struct allocation and
devcom membership are software state that should track the full bound
lifetime. As a result, a failed resume can leave a still-bound device
with sd == NULL, which mlx5_sd_get_adev() can't distinguish from a
non-SD device. Fixing this requires sd_suspend/resume APIs which will
only destroy FW resources and is left for a follow-up series.
Fixes: 381978d283 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_sd_init() creates the "multi-pf" debugfs directory under the
primary device debugfs root, but stored the dentry in the calling
device's sd struct. When sd_cleanup() run on a different PF,
this leads to using the wrong sd->dfs for removing entries, which
results in memory leak and an error in when re-creating the SD.[1]
Fix it by explicitly storing the debugfs dentry in the primary
device sd struct and use it for all per-group files.
[1]
debugfs: 'multi-pf' already exists in '0000:08:00.1'
Fixes: 4375130bf5 ("net/mlx5: SD, Add debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_sd_init() / mlx5_sd_cleanup() may run from multiple PFs in the same
Socket-Direct group. This can cause the SD bring-up/tear-down sequence
to be executed more than once or interleaved across PFs.
Protect SD init/cleanup with mlx5_devcom_comp_lock() and track the SD
group state on the primary device. Skip init if the primary is already
UP, and skip cleanup unless the primary is UP.
The state check on cleanup is needed because sd_register() drops the
devcom comp lock between marking the comp ready and assigning
primary_dev on each peer. A concurrent cleanup that acquires the lock
in this window would observe devcom_is_ready==true while primary_dev
is still NULL (causing mlx5_sd_get_primary() to return NULL) or while
the FW alias setup performed by mlx5_sd_init()'s body has not yet run
(causing sd_cmd_unset_primary() to dereference a NULL tx_ft). Gate the
cleanup body on primary_sd->state == MLX5_SD_STATE_UP, which is set
only at the very end of mlx5_sd_init() under the same comp lock - so
observing UP guarantees primary_dev, secondaries[], tx_ft, and dfs are
all populated. Also bail explicitly if mlx5_sd_get_primary() returns
NULL, in case state is checked on a peer whose primary_dev hasn't been
assigned yet.
In addition, move mlx5_devcom_comp_set_ready(false) from sd_unregister()
into the cleanup's locked section, including the !primary and
state != UP early-exit paths, so the device cannot unregister and free
its struct mlx5_sd while devcom is still marked ready. A concurrent
init acquiring the devcom lock will now observe devcom is no longer
ready and bail out immediately.
Fixes: 381978d283 ("net/mlx5e: Create single netdev per SD group")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504180206.268568-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink reload while PSP connections are active does:
mlx5_unload_one_devl_locked() -> mlx5_detach_device()
-> _mlx5e_suspend()
-> mlx5e_detach_netdev()
-> profile->cleanup_rx
-> profile->cleanup_tx
-> mlx5e_destroy_mdev_resources() -> mlx5_core_dealloc_pd() fails:
...
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:821:(pid 19722):
DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9),
syndrome (0xef0c8a), err(-22)
...
The reason for failure is the existence of TX keys, which are removed by
the PSP dev unregistration happening in:
profile->cleanup() -> mlx5e_psp_unregister() -> mlx5e_psp_cleanup()
-> psp_dev_unregister()
...but this isn't invoked in the devlink reload flow, only when changing
the NIC profile (e.g. when transitioning to switchdev mode) or on dev
teardown.
Move PSP device registration into mlx5e_nic_enable(), and unregistration
into the corresponding mlx5e_nic_disable(). These functions are called
during netdev attach/detach after RX & TX are set up.
This ensures that the keys will be gone by the time the PD is destroyed.
Fixes: 89ee2d92f6 ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, during PSP init, priv->psp is initialized to an incompletely
built psp struct. Additionally, on fs init failure priv->psp is reset to
NULL.
Change this so that only a fully initialized priv->psp is set, which
makes the code easier to reason about in failure scenarios.
Fixes: af2196f494 ("net/mlx5e: Implement PSP operations .assoc_add and .assoc_del")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->psp->psp is initialized with the PSP device as returned by
psp_dev_create(). This could also return an error, in which case a
future psp_dev_unregister() will result in unpleasantness.
Avoid that by using a local variable and only saving the PSP device when
registration succeeds.
In case psp_dev_create() fails, priv->psp and steering structs are left
in place, but they will be inert. The unchecked access of priv->psp in
mlx5e_psp_offload_handle_rx_skb() won't happen because without a PSP
device, there can be no SAs added and therefore no packets will be
successfully decrypted and be handed off to the SW handler.
Fixes: 89ee2d92f6 ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260504181100.269334-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path.
Fixes: da45d2566a ("net: wwan: t7xx: Add control port")
Cc: stable@vger.kernel.org
Signed-off-by: Pavitra Jha <jhapavitra98@gmail.com>
Link: https://patch.msgid.link/20260501110713.145563-1-jhapavitra98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to calculate the target PHC cycles required
to make phase adjustment on the PPS OUT signal. This is because
the application supplies absolute n_sec value in the future and
is already the actual desired target value.
Remove the unnecessary code.
Fixes: 9e518f2580 ("bnxt_en: 1PPS functions to configure TSIO pins")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260504083611.1383776-5-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the bnxt RDMA driver is loaded, it calls bnxt_register_dev().
As part of this, driver sends HWRM_VNIC_CFG firmware command
to configure the VNIC to operate in dual VNIC mode. Currently
the driver ignores the result of this firmware command. The RDMA
driver must know the result since it affects its functioning.
Check return value of call to bnxt_hwrm_vnic_cfg() in
bnxt_register_dev() and return failure on error.
Fixes: a588e4580a ("bnxt_en: Add interface to support RDMA driver.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-4-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the logic to set bp->max_tpa no higher than what the FW supports.
On P5 chips, some older FW sets max_tpa very low so we override it to
prevent performance regressions with the older FW.
Fixes: 79632e9ba3 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com>
Reviewed-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-3-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FW on all chips is requiring a 5-second delay after Downstream
Port Containment (DPC) AER. The previously added 900 msec delay was
not long enough in all cases because the chip's CRS (Configuration
Request Retry Status) mechanism is not always reliable.
Fixes: d5ab32e9b0 ("bnxt_en: Add delay to handle Downstream Port Containment (DPC) AER")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260504083611.1383776-2-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix an ath5k potential stack buffer overwrite.
Fix several issues in ath12k:
- WMI buffer leaks on error conditions
- use of uninitialized stack data when processing RSSI events
- incorrect logic for determining the peer ID in the RX path
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCafn3owAKCRAsFbugiYzL
e5K2AP9lVpNgx8xE4YFK6QVGTfZb9OD6ikFcvj9Y4sYakOgc3AEAyx3x8i3unBkE
z2safm5blk5AmpfA0qwLNYeVJIWflgA=
=448V
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20260505' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v7.1-rc3
Fix an ath5k potential stack buffer overwrite.
Fix several issues in ath12k:
- WMI buffer leaks on error conditions
- use of uninitialized stack data when processing RSSI events
- incorrect logic for determining the peer ID in the RX path
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mana_create_rxq(), the error cleanup path calls mana_destroy_rxq()
followed by mana_deinit_cq(). This is incorrect for two reasons:
1. mana_destroy_rxq() already calls mana_deinit_cq() internally,
so the CQ's GDMA queue is destroyed twice.
2. mana_destroy_rxq() frees the rxq via kfree(rxq) before returning.
The subsequent mana_deinit_cq(apc, cq) then operates on freed memory
since cq points to &rxq->rx_cq, which is embedded in the
already-freed rxq structure — a use-after-free.
Remove the redundant mana_deinit_cq() call from the error path since
mana_destroy_rxq() already handles CQ cleanup. mana_deinit_cq() is
itself safe for an uninitialized CQ as it checks for a NULL gdma_cq
before proceeding.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Aditya Garg <gargaditya@linux.microsoft.com>
Link: https://patch.msgid.link/20260430035935.1859220-4-dipayanroy@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mana_destroy_rxq(), mana_destroy_wq_obj() is called unconditionally
even when the WQ object was never created (rxobj is still
INVALID_MANA_HANDLE). When mana_create_rxq() fails before
mana_create_wq_obj() succeeds, the error path calls mana_destroy_rxq()
which sends a bogus destroy command to the hardware:
mana 7870:00:00.0: HWC: Failed hw_channel req: 0x1d
mana 7870:00:00.0: Failed to send mana message: -71, 0x1d
mana 7870:00:00.0 eth7: Failed to destroy WQ object: -71
Guard mana_destroy_wq_obj() with an INVALID_MANA_HANDLE check so that
mana_destroy_rxq() is safe to call at any stage of RXQ initialization.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260430035935.1859220-3-dipayanroy@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, when the firmware is not fully loaded and if_usb_disconnect
is called, if_usb_prog_firmware gets stuck waiting for
cardp->surprise_removed or cardp->fwdnldover while lbs_remove_card
also waits for the firmware loading to be completed, which never happens.
This caused the reported syzbot bug. To address this, the wake_up
function call can be added in the if_usb_disconnect function which notifies
the if_usb_prog_firmware thread and resolves the firmware loading.
Fixes: 954ee164f4 ("[PATCH] libertas: reorganize and simplify init sequence")
Reported-and-tested-by: syzbot+c99d17aa44dbdba16ad2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
Signed-off-by: Jakov Novak <jakovnovak30@gmail.com>
Link: https://patch.msgid.link/20260504162356.17250-2-jakovnovak30@gmail.com
[fix subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit e0bffe3e68 ("net: asix: ax88772: migrate to phylink") replaced
the asix_adjust_link() PHY callback with phylink's mac_link_up() and
mac_link_down() handlers, but did not carry over the usbnet_link_change()
notification that commit 805206e66f ("net: asix: fix "can't send until
first packet is send" issue") had added.
As a result, the original symptom returns: when the link comes up,
usbnet is never notified, so the RX URB submission stays dormant until
some other event (e.g. a transmitted packet triggering the status
endpoint interrupt) wakes it up.
This is reproducible with the Apple A1277 USB Ethernet Adapter
(05ac:1402, AX88772A based) on a Banana Pro using a static IPv4
configuration. After bringing the interface up, no incoming packets are
received until the first outgoing frame triggers usbnet's RX path.
Restore the link change notification, gated on a carrier transition so
the call remains idempotent if the status endpoint also reports the
change later.
Fixes: e0bffe3e68 ("net: asix: ax88772: migrate to phylink")
Signed-off-by: Markus Baier <Markus.Baier@soslab.tu-darmstadt.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260501163941.107668-1-Markus.Baier@soslab.tu-darmstadt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovpn injects decrypted packets into the netdev RX path through
ovpn_netdev_write() which invokes gro_cells_receive() and
dev_dstats_rx_add().
ovpn_netdev_write() is normally called in softirq context,
however, in case of TCP connections it may also be invoked
process context.
When this happens gro_cells_receive() will throw a warning:
[ 230.183747][ T12] WARNING: net/core/gro_cells.c:30 at gro_cells_receive+0x708/0xaa0, CPU#1: kworker/u16:0/12
and lockdep will also report a potential inconsistent lock state:
WARNING: inconsistent lock state
7.0.0-rc4+ #246 Tainted: G W
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
because attempts to acquire gro_cells->bh_lock by both
contexts may lead to a deadlock.
At the same time, dev_dstats_rx_add() does not expect to race
with a softirq (which may happen when invoked in process context),
because the latter may access its per-cpu state and corrupt
it.
Fix all this by invoking local_bh_disable/enable() around
gro_cells_receive() and dev_dstats_rx_add() to ensure that
bottom halves are always disabled before calling both of
them.
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
After decapsulating a packet, the skb->mac_header still points to the
outer transport header.
Fix this by calling skb_reset_mac_header() in ovpn_netdev_write() to
ensure the MAC header points to the beginning of
the inner IP/network packet, as expected by the rest of the stack.
Reported-by: Minqiang Chen <ptpt52@gmail.com>
Fixes: 8534731dbf ("ovpn: implement packet processing")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Vincent reports:
> The ath5k driver seems to do an array-index-out-of-bounds access as
> shown by the UBSAN kernel message:
> UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20
> index 4 is out of range for type 'ieee80211_tx_rate [4]'
> ...
> Call Trace:
> <TASK>
> dump_stack_lvl+0x5d/0x80
> ubsan_epilogue+0x5/0x2b
> __ubsan_handle_out_of_bounds.cold+0x46/0x4b
> ath5k_tasklet_tx+0x4e0/0x560 [ath5k]
> tasklet_action_common+0xb5/0x1c0
It is real. 'ts->ts_final_idx' can be 3 on 5212, so:
info->status.rates[ts->ts_final_idx + 1].idx = -1;
with the array defined as:
struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
while the size is:
#define IEEE80211_TX_MAX_RATES 4
is indeed bogus.
Set this 'idx = -1' sentinel only if the array index is less than the
array size. As mac80211 will not look at rates beyond the size
(IEEE80211_TX_MAX_RATES).
Note: The effect of the OOB write is negligible. It just overwrites the
next member of info->status, i.e. ack_signal.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reported-by: Vincent Danjean <vdanjean@debian.org>
Link: https://lore.kernel.org/all/aQYUkIaT87ccDCin@eldamar.lan
Closes: https://bugs.debian.org/1119093
Fixes: 6d7b97b23e ("ath5k: fix tx status reporting issues")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251209100459.2253198-1-jirislaby@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath12k_dp_rx_deliver_msdu() currently uses hal_rx_desc_data::peer_id
parsed from mpdu_start descriptor to do peer lookup. However In an A-MSDU
aggregation scenario, hardware only populates mpdu_start descriptor for
the first sub-msdu, but not the following ones. In that case peer_id could
be invalid, leading to peer lookup failure:
ath12k_wifi7_pci 0000:06:00.0: rx skb 00000000c391c041 len 1532 peer (null) 0 ucast sn 0 eht320 rate_idx 12 vht_nss 2 freq 6105 band 3 flag 0x40d1a fcs-err 0 mic-err 0 amsdu-more 0
As a result pubsta is NULL and parts of ieee80211_rx_status structure are
left uninitialized, which may cause unexpected behavior.
Fix it by switching the normal RX path to use ath12k_skb_rxcb::peer_id
which is parsed from REO ring's rx_mpdu_desc and is always valid.
hal_rx_desc_data::peer_id is still used in
ath12k_wifi7_dp_rx_frag_h_mpdu(), which is safe since A-MSDU
aggregation does not occur for fragmented frames. Similarly,
ath12k_skb_rxcb::peer_id may be overwritten by hal_rx_desc_data::peer_id
in ath12k_wifi7_dp_rx_h_mpdu(), which only handles non-aggregated
multicast/broadcast traffic.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: 11157e0910 ("wifi: ath12k: Use ath12k_dp_peer in per packet Tx & Rx paths")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-ath12k-fix-peer-id-source-v1-1-b5f701fb8e88@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the RSSI dBm conversion event handler leaves struct
ath12k_wmi_rssi_dbm_conv_info_arg uninitialized on the stack before
calling the TLV parser. If one of the optional sub-TLVs is absent, the
corresponding *_present flag retains stack garbage and later gets read
in ath12k_wmi_update_rssi_offsets(). With UBSAN enabled this triggers an
invalid-load report for _Bool:
UBSAN: invalid-load in drivers/net/wireless/ath/ath12k/wmi.c:9682:15
load of value 9 is not a valid value for type '_Bool'
Call Trace:
ath12k_wmi_rssi_dbm_conversion_params_info_event.cold+0x72/0x85 [ath12k]
ath12k_wmi_op_rx+0x1871/0x2ab0 [ath12k]
ath12k_htc_rx_completion_handler+0x44b/0x810 [ath12k]
ath12k_ce_recv_process_cb+0x554/0x9f0 [ath12k]
ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k]
ath12k_pci_ce_workqueue+0x69/0x120 [ath12k]
Initialize the parsed event state to zero before passing it to the TLV
parser so missing sub-TLVs correctly leave the presence flags false.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 0314ee81a9 ("wifi: ath12k: handle WMI event for real noise floor calculation")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427103011.2983269-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
XGBE_PTP_ACT_CLK_FREQ and XGBE_V2_PTP_ACT_CLK_FREQ were 10x too
large (500MHz/1GHz instead of 50MHz/100MHz), causing the computed
addend to overflow the 32-bit tstamp_addend. In the general case
this would result in the clock advancing at the wrong rate. For v2
(PCI), ptpclk_rate is hardcoded to 125MHz, so the addend formula
(ACT_CLK_FREQ << 32) / ptpclk_rate yields exactly 8 * 2^32, and
when stored to the 32-bit tstamp_addend the value is zero. With
addend = 0 the hardware accumulator never overflows and the PTP
clock is fully stopped. For v1 (platform), ptpclk_rate is read from
ACPI/DT so the exact overflow behavior depends on the
firmware-reported frequency.
Define the constants as NSEC_PER_SEC / SSINC so the relationship is
explicit and cannot drift out of sync.
Fixes: fbd47be098 ("amd-xgbe: add hardware PTP timestamping support")
Tested-by: Gregory Fuchedgi <gfuchedgi@gmail.com>
Signed-off-by: Gregory Fuchedgi <gfuchedgi@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-fix-xgbe-ptp-addend-v1-1-fca5b0ca5e62@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the driver is used in a non tdm mode priv->utdm is a NULL pointer.
Therefore we need to check this pointer first before checking si_regs.
Fixes: c19b6d246a ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmapping of uf_regs is done from ucc_fast_free and doesn't need to be
done explicitly. If already unmapped ucc_fast_free will crash.
Fixes: c19b6d246a ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apple Silicon Macs expose two CDC NCM "private" data interfaces over
USB-C with VID:PID 0x05ac:0x1905 and product string "Mac". This is the
same protocol Apple already ships on iPhone (0x05ac:0x12a8) and iPad
(0x05ac:0x12ab) for RemoteXPC since iOS 17 -- both data interfaces lack
an interrupt status endpoint, so they rely on the FLAG_LINK_INTR-
conditional bind path introduced in commit 3ec8d7572a ("CDC-NCM: add
support for Apple's private interface").
The id_table currently has entries for iPhone and iPad but not for the
Mac. Without a match, cdc_ncm falls through to the generic CDC NCM
class-match entry, which uses the FLAG_LINK_INTR-having cdc_ncm_info
struct, so bind_common() fails on the missing status endpoint and no
netdev appears.
Add id_table entries for both interface numbers (0 and 2) of the Mac,
bound to the existing apple_private_interface_info driver_info.
Verified empirically on a Mac Studio M3 Ultra running macOS 26.5: when
a Mac is connected via USB-C, ioreg shows VID 0x05ac, PID 0x1905,
product string "Mac", with two NCM data interfaces at numbers 0 and 2.
The same PID is presented by all current Apple Silicon Mac models
(MacBook Pro/Air, Mac mini, Mac Studio across the M-series), mirroring
Apple's single-PID-per-family pattern from iPhone/iPad.
After this patch, plugging a Mac into a Linux host running the patched
kernel produces two enx... interfaces (one per data interface),
"ip -br link" lists them as UP, and standard userspace networking
(DHCP, NetworkManager shared mode, etc.) works without any modprobe
overrides or out-of-tree modules.
Signed-off-by: Alex Cheema <alex@exolabs.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429175739.34426-1-alex@exolabs.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TRENDnet TUC-ET2G V2.0 is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260430213435.21821-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When cn20k default L2 rules are not installed,
npc_cn20k_dft_rules_idx_get() leaves broadcast, multicast, promiscuous, and
unicast slots at USHRT_MAX. npc_get_nixlf_mcam_index() previously returned
that sentinel as a valid MCAM index, so callers could program hardware with
an invalid index.
Return -EINVAL from the cn20k branches of npc_get_nixlf_mcam_index() when
the requested slot is still USHRT_MAX. Harden cn20k NPC MCAM entry helpers
to reject out-of-range indices before touching hardware.
Drop the early bounds check in npc_enable_mcam_entry() for cn20k so invalid
indices are validated inside npc_cn20k_enable_mcam_entry() instead of being
silently ignored.
In rvu_npc_update_flowkey_alg_idx(), treat negative MCAM indices like
out-of-range values, and only update RSS actions for promiscuous and
all-multi paths when the resolved index is non-negative.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-11-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_cn20k_dft_rules_free() used the NPC MCAM mbox "free all" path, which
does not match how cn20k tracks default-rule MCAM slots indexes.
Resolve the default-rule indices, then for each valid slot clear the bitmap
entry, drop the PF/VF map, disable the MCAM line, clear the target
function, and npc_cn20k_idx_free(). Remove any matching software mcam_rules
nodes. On hard failure from idx_free, WARN and stop so the box stays up for
analysis.
In npc_mcam_free_all_entries(), prefetch the same default-rule indices and,
on cn20k, skip bitmap clear and idx_free when the scanned entry is one of
those reserved defaults (they are released by npc_cn20k_dft_rules_free).
Fixes: 09d3b7a140 ("octeontx2-af: npc: cn20k: Allocate default MCAM indexes")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-10-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_cn20k_dft_rules_idx_get() wrote USHRT_MAX into individual outputs only
on some error paths (lbk promisc lookup, VF ucast lookup, and the PF rule
walk), which could leave other caller slots stale across retries.
Set every non-NULL bcast/mcast/promisc/ucast pointer to USHRT_MAX once at
entry, then drop the duplicate assignments on failure. Successful lookups
still overwrite the relevant slot before returning.
Fixes: 09d3b7a140 ("octeontx2-af: npc: cn20k: Allocate default MCAM indexes")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-9-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_cn20k_read_mcam_entry() always reloaded action and vtag_action from
bank 0 after programming the CAM words. Use the bank returned by
npc_get_bank() for the ACTION reads as well, and read those registers once
up front so both X2 and X4 paths share the same metadata.
Return directly from the X2 keyword path now that the action fields are
already populated.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-8-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For X4 keys its loop reused the bank parameter as the loop counter, so bank
no longer reflected the caller's bank after the loop and the control flow
was hard to follow.
Program NPC_AF_CN20K_MCAMEX_BANKX_CFG_EXT directly in
npc_cn20k_config_mcam_entry(): one CFG write for X2 using the computed
bank, and one CFG write per bank inside the X4 action loop. Enable the
entry at the end with npc_cn20k_enable_mcam_entry(..., true) instead of
embedding the enable bit in bank_cfg via the removed helper.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 4e527f1e5c ("octeontx2-af: npc: cn20k: Add new mailboxes for CN20K silicon")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-7-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the old four-argument CN20K MCAM clear with a per-bank static
helper and npc_cn20k_clear_mcam_entry() that takes a logical MCAM index,
resolves the key width via npc_mcam_idx_2_key_type(), and clears either one
bank (X2) or every bank (X4).
Call it from npc_clear_mcam_entry() on cn20k and log when key-type lookup
fails. Use the per-bank helper from npc_cn20k_config_mcam_entry() for
pre-program clears.
For loopback VFs, use the promisc MCAM index as ucast_idx when copying RSS
action for promisc, matching cn20k default-rule layout.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-6-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_defrag_move_vdx_to_free() disables, copies, and enables the MCAM entry
at a new index but previously left entry2target_pffunc[] and the mcam_rules
list still keyed to the old index. Copy the target PF association to the
new slot, clear the old one, and retarget the rule entry so software state
matches the relocated hardware context.
Fixes: 645c6e3c19 ("octeontx2-af: npc: cn20k: virtual index support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-5-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_defrag_alloc_free_slots() allocates MCAM indexes in up to two passes on
bank0 then bank1. On failure it rolls back by freeing entries already
placed in save[].
__npc_subbank_alloc() can return a negative errno while only part of the
indexes are valid. The rollback loop used rc for
npc_mcam_idx_2_subbank_idx() as well, so a successful lookup stored zero in
rc and a later __npc_subbank_free() failure could still end with return 0
when the allocation path had also left rc at zero (for example shortfall
after zero return values from the alloc helpers).
Jump to the rollback path immediately when either __npc_subbank_alloc()
call fails, preserving its errno. If both calls succeed but the total
allocated count is still less than cnt, set rc to -ENOSPC before rollback.
Use a separate err variable for npc_mcam_idx_2_subbank_idx() so a
successful lookup no longer clears a non-zero rc from the allocation phase.
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 645c6e3c19 ("octeontx2-af: npc: cn20k: virtual index support")
Link: https://lore.kernel.org/netdev/adjNJEpILRZATB2N@stanley.mountain/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
debugfs is not intended to be checked for allocation failures the way other
kernel APIs are: callers should not fail probe or subsystem init because a
debugfs node could not be created, including when debugfs is disabled in
Kconfig. Replacing NULL checks with IS_ERR() checks is similarly wrong for
optional debugfs.
Remove dentry checks and -EFAULT returns from npc_cn20k_debugfs_init().
See:
https://staticthinking.wordpress.com/2023/07/24/
debugfs-functions-are-not-supposed-to-be-checked/
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 528530dff5 ("octeontx2-af: npc: cn20k: add debugfs support")
Link: https://lore.kernel.org/netdev/adjNGPWKMOk3KgWL@stanley.mountain/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-3-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_mcam_idx_2_key_type() can fail; callers used to ignore it and still
used kw_type when enabling, configuring, copying, and reading MCAM entries.
That could program or decode hardware with an undefined key type.
Return -EINVAL when key-type lookup fails. Return -EINVAL from
npc_cn20k_copy_mcam_entry() when src and dest key types differ instead of
failing silently.
Change npc_cn20k_{enable,config,copy,read}_mcam_entry() to return int on
success or error. Thread those errors through the cn20k MCAM write and read
mbox handlers, the cn20k baseline steer read path, NPC defrag move
(disable/copy/enable with dev_err and -EFAULT), and the DMAC update path in
rvu_npc_fs.c.
Make npc_copy_mcam_entry() return int so the cn20k branch can return
npc_cn20k_copy_mcam_entry() without a void/int mismatch, and fail
NPC_MCAM_SHIFT_ENTRY when copy fails.
Cc: Suman Ghosh <sumang@marvell.com>
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 6d1e70282f ("octeontx2-af: npc: cn20k: Use common APIs")
Link: https://lore.kernel.org/netdev/adiQJvuKlEhq2ILx@stanley.mountain/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-2-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
