phylink_init_eee() is currently unused.
It was last added in 2019 by
commit 86e58135bc ("net: phylink: add phylink_init_eee() helper")
but it didn't actually wire a use up.
It had previous been removed in 2017 by
commit 939eae25d9 ("phylink: remove phylink_init_eee()").
Remove it again.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250306184534.246152-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The port header is a general file under include, yet it
contains declarations for functions that are either not
exported or exported but not used outside the mlx5_core
driver.
To enhance code organization, we move these declarations
to mlx5_core.h, where they are more appropriately scoped.
This refactor removes unnecessary exported symbols and
prevents unexported functions from being inadvertently
referenced outside of the mlx5_core driver.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250304160620.417580-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only devlink and sriov paths are grabbing rtnl explicitly. The rest is
covered by netdev instance lock which the core now grabs, so there is
no need to manage rtnl in most places anymore.
On the core side we can now try to drop rtnl in some places
(do_setlink for example) for the drivers that signal non-rtnl
mode (TBD).
Boot-tested and with `ethtool -L eth1 combined 24` to trigger reset.
Cc: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-15-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also clarify ndo_get_stats (that read and write paths can run
concurrently) and mention only RCU.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-14-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently only the drivers that implement shaper or queue APIs
are grabbing instance lock. Add an explicit opt-in for the
drivers that want to grab the lock without implementing the above
APIs.
There is a 3-byte hole after @up, use it:
/* --- cacheline 47 boundary (3008 bytes) --- */
u32 napi_defer_hard_irqs; /* 3008 4 */
bool up; /* 3012 1 */
/* XXX 3 bytes hole, try to pack */
struct mutex lock; /* 3016 144 */
/* XXX last struct has 1 hole */
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-13-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cover the paths that come via bpf system call and XSK bind.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-10-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of them are already covered by the converted dev_xxx APIs.
Add the locking wrappers for the remaining ones.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-9-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert all ndo_eth_ioctl invocations to dev_eth_ioctl which does the
locking. Reflow some of the dev_siocxxx to drop else clause.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-8-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To preserve the atomicity, hold the lock while applying multiple
attributes. The major issue with a full conversion to the instance
lock are software nesting devices (bonding/team/vrf/etc). Those
devices call into the core stack for their lower (potentially
real hw) devices. To avoid explicitly wrapping all those places
into instance lock/unlock, introduce new API boundaries:
- (some) existing dev_xxx calls are now considered "external"
(to drivers) APIs and they transparently grab the instance
lock if needed (dev_api.c)
- new netif_xxx calls are internal core stack API (naming is
sketchy, I've tried netdev_xxx_locked per Jakub's suggestion,
but it feels a bit verbose; but happy to get back to this
naming scheme if this is the preference)
This avoids touching most of the existing ioctl/sysfs/drivers paths.
Note the special handling of ndo_xxx_slave operations: I exploit
the fact that none of the drivers that call these functions
need/use instance lock. At the same time, they use dev_xxx
APIs, so the lower device has to be unlocked.
Changes in unregister_netdevice_many_notify (to protect dev->state
with instance lock) trigger lockdep - the loop over close_list
(mostly from cleanup_net) introduces spurious ordering issues.
netdev_lock_cmp_fn has a justification on why it's ok to suppress
for now.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the drivers that use queue management API, switch to the mode where
core stack holds the netdev instance lock. This affects the following
drivers:
- bnxt
- gve
- netdevsim
Originally I locked only start/stop, but switched to holding the
lock over all iterations to make them look atomic to the device
(feels like it should be easier to reason about).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce new dev_setup_tc for nft ndo_setup_tc paths.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the drivers that use shaper API, switch to the mode where
core stack holds the netdev lock. This affects two drivers:
* iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly
remove these
* netdevsim - switch to _locked APIs to avoid deadlock
iavf_close diff is a bit confusing, the existing call looks like this:
iavf_close() {
netdev_lock()
..
netdev_unlock()
wait_event_timeout(down_waitqueue)
}
I change it to the following:
netdev_lock()
iavf_close() {
..
netdev_unlock()
wait_event_timeout(down_waitqueue)
netdev_lock() // reusing this lock call
}
netdev_unlock()
Since I'm reusing existing netdev_lock call, so it looks like I only
add netdev_unlock.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ8luaQAKCRCRxhvAZXjc
ojy2AP4uh2xDBycjRQV+YIMwbwJo7cuphZH8MuLzrUKTTH50BQEA9+tpOpvI9vW3
326FH2wo8Hzqn3rct217/tpTCww64Qk=
=/iqC
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix spelling mistakes in idmappings.rst
- Fix RCU warnings in override_creds()/revert_creds()
- Create new pid namespaces with default limit now that pid_max is
namespaced
* tag 'vfs-6.14-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pid: Do not set pid_max in new pid namespaces
doc: correcting two prefix errors in idmappings.rst
cred: Fix RCU warnings in override/revert_creds
That's what 'pipe_full()' does, so it's more consistent. But more
importantly it gets the type limits right when the pipe head and tail
are no longer necessarily 'unsigned int'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move definition of struct phy_package_shared to phy_package.c, and
move remaining PHY package related declarations from phy.h to
phylib.h, thus making them accessible for PHY drivers only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/211e14b6-e2f8-43d7-b533-3628ec548456@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move PHY package related inline functions from phy.h to phy_package.c.
While doing so remove locked versions phy_package_read() and
phy_package_write() which have no user.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/a4518379-7a5d-45f3-831c-b7fde6512c65@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SerDes will configure according to the provided interface mode after
finish a major reconfiguration of the interface mode.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-5-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Exports intel_pmc_ipc() for host access to the PMC IPC mailbox
- Enables the host to access specific SoC registers through the PMC
firmware using IPC commands. This access method is necessary for
registers that are not available through direct Memory-Mapped I/O (MMIO),
which is used for other accessible parts of the PMC.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Chao Qin <chao.qin@intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-4-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While looking for incorrect users of the pipe head/tail fields (see
commit c27c66afc4: "fs/pipe: Fix pipe_occupancy() with 16-bit
indexes"), I found a bug in pipe_discard_from() that looked entirely
broken.
However, the fix is trivial: this buggy function isn't actually called
by anything, so let's just remove it ASAP.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add htmldoc annotation for the newly introduced "head_tail" member
describing it to be a union of the pipe_inode_info's @head and @tail
members.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20250305204609.5e64768e@canb.auug.org.au/
Fixes: 3d252160b8 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pipe_occupancy() logic implicitly relied on the natural unsigned
modulo arithmetic in C, but that doesn't work for the new 'pipe_index_t'
case, since any arithmetic will be done in 'int' (and here we had also
made it 'unsigned int' due to the function call boundary).
So make the modulo arithmetic explicit by casting the result to the
proper type.
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/all/CAHk-=wjyHsGLx=rxg6PKYBNkPYAejgo7=CbyL3=HGLZLsAaJFQ@mail.gmail.com/
Fixes: 3d252160b8 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
File descriptor based pc_clock_*() operations of dynamic posix clocks
have access to the file pointer and implement permission checks in the
generic code before invoking the relevant dynamic clock callback.
Character device operations (open, read, poll, ioctl) do not implement a
generic permission control and the dynamic clock callbacks have no
access to the file pointer to implement them.
Extend struct posix_clock_context with a struct file pointer and
initialize it in posix_clock_open(), so that all dynamic clock callbacks
can access it.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For PPPoE, PPTP, and PPPoL2TP, the start_xmit() function directly
forwards packets to the underlying network stack and never returns
anything other than 1. So these interfaces do not require a qdisc,
and the IFF_NO_QUEUE flag should be set.
Introduces a direct_xmit flag in struct ppp_channel to indicate when
IFF_NO_QUEUE should be applied. The flag is set in ppp_connect_channel()
for relevant protocols.
While at it, remove the usused latency member from struct ppp_channel.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250301135517.695809-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pipe_readable(), pipe_writable(), and pipe_poll() can read "pipe->head"
and "pipe->tail" outside of "pipe->mutex" critical section. When the
head and the tail are read individually in that order, there is a window
for interruption between the two reads in which both the head and the
tail can be updated by concurrent readers and writers.
One of the problematic scenarios observed with hackbench running
multiple groups on a large server on a particular pipe inode is as
follows:
pipe->head = 36
pipe->tail = 36
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wakes up: pipe not full*
hackbench-118762 [057] ..... 1029.550548: pipe_write: head: 36 -> 37 [tail: 36]
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next reader 118740*
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next writer 118768*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: *writer wakes up*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: head = READ_ONCE(pipe->head) [37]
... CPU 206 interrupted (exact wakeup was not traced but 118768 did read head at 37 in traces)
hackbench-118740 [057] ..... 1029.550558: pipe_read: *reader wakes up: pipe is not empty*
hackbench-118740 [057] ..... 1029.550558: pipe_read: tail: 36 -> 37 [head = 37]
hackbench-118740 [057] ..... 1029.550559: pipe_read: *pipe is empty; wakeup writer 118768*
hackbench-118740 [057] ..... 1029.550559: pipe_read: *sleeps*
hackbench-118766 [185] ..... 1029.550592: pipe_write: *New writer comes in*
hackbench-118766 [185] ..... 1029.550592: pipe_write: head: 37 -> 38 [tail: 37]
hackbench-118766 [185] ..... 1029.550592: pipe_write: *wakes up reader 118766*
hackbench-118740 [185] ..... 1029.550598: pipe_read: *reader wakes up; pipe not empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: tail: 37 -> 38 [head: 38]
hackbench-118740 [185] ..... 1029.550599: pipe_read: *pipe is empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: *reader sleeps; wakeup writer 118768*
... CPU 206 switches back to writer
hackbench-118768 [206] ..... 1029.550601: pipe_write: tail = READ_ONCE(pipe->tail) [38]
hackbench-118768 [206] ..... 1029.550601: pipe_write: pipe_full()? (u32)(37 - 38) >= 16? Yes
hackbench-118768 [206] ..... 1029.550601: pipe_write: *writer goes back to sleep*
[ Tasks 118740 and 118768 can then indefinitely wait on each other. ]
The unsigned arithmetic in pipe_occupancy() wraps around when
"pipe->tail > pipe->head" leading to pipe_full() returning true despite
the pipe being empty.
The case of genuine wraparound of "pipe->head" is handled since pipe
buffer has data allowing readers to make progress until the pipe->tail
wraps too after which the reader will wakeup a sleeping writer, however,
mistaking the pipe to be full when it is in fact empty can lead to
readers and writers waiting on each other indefinitely.
This issue became more problematic and surfaced as a hang in hackbench
after the optimization in commit aaec5a95d5 ("pipe_read: don't wake up
the writer if the pipe is still full") significantly reduced the number
of spurious wakeups of writers that had previously helped mask the
issue.
To avoid missing any updates between the reads of "pipe->head" and
"pipe->write", unionize the two with a single unsigned long
"pipe->head_tail" member that can be loaded atomically.
Using "pipe->head_tail" to read the head and the tail ensures the
lockless checks do not miss any updates to the head or the tail and
since those two are only updated under "pipe->mutex", it ensures that
the head is always ahead of, or equal to the tail resulting in correct
calculations.
[ prateek: commit log, testing on x86 platforms. ]
Reported-and-debugged-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Closes: https://lore.kernel.org/lkml/e813814e-7094-4673-bc69-731af065a0eb@amd.com/
Reported-by: Alexey Gladkov <legion@kernel.org>
Closes: https://lore.kernel.org/all/Z8Wn0nTvevLRG_4m@example.org/
Fixes: 8cefc107ca ("pipe: Use head and tail pointers for the ring, not cursor and length")
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
-----BEGIN PGP SIGNATURE-----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=KYXQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It could be hard to understand why the netlink command fails. For example,
if dev->netns_immutable is set, the error is "Invalid argument".
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix RCU warnings in override_creds and revert_creds by turning
the RCU pointer into a normal pointer using rcu_replace_pointer.
These warnings were previously private to the cred code, but due
to the move into the header file they are now polluting unrelated
subsystems.
Fixes: 49dffdfde4 ("cred: Add a light version of override/revert_creds()")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/Z8QGQGW0IaSklKG7@gondor.apana.org.au
Signed-off-by: Christian Brauner <brauner@kernel.org>
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the TLB)
of hugetlb PTEs constructed using the contiguous bit
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmfDdBIQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNN0GB/9gmEOX1GwMU6wFjPYqvjWlkGCFDwrldO84
uF9jEUbPaw3P4xHTOFyPCfEWidktqa+yDVbe90mB7GVOM+1eEZ81em1k1hYBEXbz
Q73Nl5VrNzxX4BjOrdxxoTSaR/TKklUh5mqWfIzy1RxEnBfpr/GuDPtUn1GViCAs
sU16Ju12UdYXn3tyHFDHpjZS9WYZskfnrvS0QvXinz0LahZrCkeaH+ptYHrTjMFx
hxyrRQwOlqLnZWvjLOegH9AC6uyRkKDinXKhXqHYvUfcfEkQsKwM7Fpc6cviUD0Q
X2npLNegnYxPniwmLpXfNXazPDnKVMzxb9lpqw1fZS3nAuh8XOde
=RqDZ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Ryan's been hard at work finding and fixing mm bugs in the arm64 code,
so here's a small crop of fixes for -rc5.
The main changes are to fix our zapping of non-present PTEs for
hugetlb entries created using the contiguous bit in the page-table
rather than a block entry at the level above. Prior to these fixes, we
were pulling the contiguous bit back out of the PTE in order to
determine the size of the hugetlb page but this is clearly bogus if
the thing isn't present and consequently both the clearing of the
PTE(s) and the TLB invalidation were unreliable.
Although the problem was found by code inspection, we really don't
want this sitting around waiting to trigger and the changes are CC'd
to stable accordingly.
Note that the diffstat looks a lot worse than it really is;
huge_ptep_get_and_clear() now takes a size argument from the core code
and so all the arch implementations of that have been updated in a
pretty mechanical fashion.
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the
TLB) of hugetlb PTEs constructed using the contiguous bit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
arm64/mm: Fix Boot panic on Ampere Altra
* Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2
and not mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
* Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly
race that would lead to running with an unallocated VMID.
RISC-V:
* Fix hart status check in SBI HSM extension
* Fix hart suspend_type usage in SBI HSM extension
* Fix error returned by SBI IPI and TIME extensions for
unsupported function IDs
* Fix suspend_type usage in SBI SUSP extension
* Remove unnecessary vcpu kick after injecting interrupt
via IMSIC guest file
x86:
* Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
* To avoid freeing the PIC while vCPUs are still around, which
would cause a NULL pointer access with the previous patch,
destroy vCPUs before any VM-level destruction.
* Handle failures to create vhost_tasks
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfCvVsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPqGwf9FOWQRd/yCKHiufjPDefD1Og0DmgB
Dgk0nmHxaxbyPw+5vYlhn/J3vZ54sNngBpmUekE5OuBMZ9EsxXAK/myByHkzNnV9
cyLm4vYwpb9OQmbQ5MMdDlptYsjV40EmSfwwIJpBxjdkwAI3f7NgeHvG8EwkJgch
C+X4JMrLu2+BGo7BUhuE/xrB8h0CBRnhalB5aK1wuF+ey8v06zcU0zdQCRLUpOsx
mW9S0OpSpSlecvcblr0AhuajjHjwFaTFOQofaXaQFBW6kv3dXmSq/JRABEfx0TBb
MTUDQtnnaYvPy/RWwZIzBpgfASLQNQNxSJ7DIw9C8IG7k6rK25BSRwTmSw==
=afMB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
build warnings that happens on PIE-enabled architectures
such as LoongArch.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmfCCV0RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1jHsA//RLrKlu/nvMO0l03s9ndWaunz0Nih/Z54
JJm4Ig+NLYY8VWLH+q6xfII8LT0oUeLh4OtmRj1vMhDbi2DnWozzDA1cvh6Fhyfj
YG9Xgzej7ZPU43AVlItl80TbG/xfEdD5yxZx8WC6/WUI17XcpTkDC9/NG/NfrUjY
2a+A8nJk/qa/M+qCHf7ugDxMQFrOVRDDtdBSRAUbifqgygKO+AtXCIyeBfbtVkyV
GEWusjO4lsyiY1dzG911h+ROIl/hp6Y3B940PSXyiwjs8JFJJplECnrnwROvRhTm
xUDFeszEh40i6zHu2dzFf0up9vFCFZGpjzvMTc0Dt50i4Z3OxbxXW+Ust2YjpSms
Ux+MHsH850UoXS/4QB7R2RJndqLTvsYkcu8uhOc2izVkWvTORba0+SMguKuTu1xI
MDKozZxtH1DPCtMcZtNIgVlQEwsioKaHUS/PgXhdqw8+fg3ur9FEXp8Q2ubUm7XJ
VJm6nF0RvFZNiIIDm81O1Z1RmmxUuAlAHWIOREaNzTSHu3ptBjBOtRrBTem2WAMa
9g1n4GoB7HI96TG36ik0/1oZhEAhawEwT/HhehVpPJyKNQooADYqhhPpfysyGJzq
mp+oOdf0QYfD0+M4oqmEGN0fhIlNobK7ap2O+t7HPcJwO1Om3h6WCkyijixj6xPt
cOuqhG+GKSk=
=16p4
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
Several stmmac sub-drivers which support RGMII follow the same pattern.
They calculate the transmit clock rate, and then call clk_set_rate().
Analysis of several implementation documents suggests that the platform
is responsible for providing the transmit clock to the DWMAC core's
clk_tx_i. The expected rates are:
10Mbps 100Mbps 1Gbps
MII 2.5MHz 25MHz
RMII 2.5MHz 25MHz
GMII 125MHz
RGMI 2.5MHz 25MHz 125MHz
It seems some platforms require this clock to be manually configured,
but there are outputs from the MAC core that indicate the speed, so a
platform may use these to automatically configure the clock. Thus, we
can't just provide one solution to configure this clock rate.
Moreover, the clock may need to be derived from one of several sources
depending on the interface mode.
Provide a platform hook that is passed the transmit clock, interface
mode and speed.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0F-0052sS-Lr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gcc warns about unused const variables even in header files when
building with W=1:
In file included from include/linux/qed/qed_rdma_if.h:14,
from drivers/net/ethernet/qlogic/qed/qed_rdma.h:16,
from drivers/net/ethernet/qlogic/qed/qed_cxt.c:23:
include/linux/qed/qed_ll2_if.h:270:33: error: 'qed_ll2_ops_pass' defined but not used [-Werror=unused-const-variable=]
270 | static const struct qed_ll2_ops qed_ll2_ops_pass = {
This one is intentional, so mark it as __maybe_unused to it can be
included from a file that doesn't use this variable.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20250225200926.4057723-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the huge_pte is being cleared in huge_ptep_get_and_clear().
Provide for this by adding an `unsigned long sz` parameter to the
function. This follows the same pattern as huge_pte_clear() and
set_huge_pte_at().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, loongarch, mips,
parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed
in a separate commit.
Cc: stable@vger.kernel.org
Fixes: 66b3923a1a ("arm64: hugetlb: add support for PTE contiguous bit")
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20250226120656.2400136-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
this week, so next week's PR is probably going to be bigger. A healthy
dose of fixes for bugs introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net()
RDMA driver register notifier after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue
with LED support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+Ci7
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Add a function to get an array of skbs from the NAPI percpu cache.
It's supposed to be a drop-in replacement for
kmem_cache_alloc_bulk(skbuff_head_cache, GFP_ATOMIC) and
xdp_alloc_skb_bulk(GFP_ATOMIC). The difference (apart from the
requirement to call it only from the BH) is that it tries to use
as many NAPI cache entries for skbs as possible, and allocate new
ones only if needed.
The logic is as follows:
* there is enough skbs in the cache: decache them and return to the
caller;
* not enough: try refilling the cache first. If there is now enough
skbs, return;
* still not enough: try allocating skbs directly to the output array
with %GFP_ZERO, maybe we'll be able to get some. If there's now
enough, return;
* still not enough: return as many as we were able to obtain.
Most of times, if called from the NAPI polling loop, the first one will
be true, sometimes (rarely) the second one. The third and the fourth --
only under heavy memory pressure.
It can save significant amounts of CPU cycles if there are GRO cycles
and/or Tx completion cycles (anything that descends to
napi_skb_cache_put()) happening on this CPU.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A common task for most drivers is to remember the user-set CPU affinity
to its IRQs. On each netdev reset, the driver should re-assign the user's
settings to the IRQs. Unify this task across all drivers by moving the CPU
affinity to napi->config.
However, to move the CPU affinity to core, we also need to move aRFS
rmap management since aRFS uses its own IRQ notifiers.
For the aRFS, add a new netdev flag "rx_cpu_rmap_auto". Drivers supporting
aRFS should set the flag via netif_enable_cpu_rmap() and core will allocate
and manage the aRFS rmaps. Freeing the rmap is also done by core when the
netdev is freed. For better IRQ affinity management, move the IRQ rmap
notifier inside the napi_struct and add new notify.notify and
notify.release functions: netif_irq_cpu_rmap_notify() and
netif_napi_affinity_release().
Now we have the aRFS rmap management in core, add CPU affinity mask to
napi_config. To delegate the CPU affinity management to the core, drivers
must:
1 - set the new netdev flag "irq_affinity_auto":
netif_enable_irq_affinity(netdev)
2 - create the napi with persistent config:
netif_napi_add_config()
3 - bind an IRQ to the napi instance: netif_napi_set_irq()
the core will then make sure to use re-assign affinity to the napi's
IRQ.
The default IRQ mask is set to one cpu starting from the closest NUMA.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The linked series wants to add skb tx completion timestamps.
That needs a bit in skb_shared_info.tx_flags, but all are in use.
A per-skb bit is only needed for features that are configured on a
per packet basis. Per socket features can be read from sk->sk_tsflags.
Per packet tsflags can be set in sendmsg using cmsg, but only those in
SOF_TIMESTAMPING_TX_RECORD_MASK.
Per packet tsflags can also be set without cmsg by sandwiching a
send inbetween two setsockopts:
val |= SOF_TIMESTAMPING_$FEATURE;
setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val));
write(fd, buf, sz);
val &= ~SOF_TIMESTAMPING_$FEATURE;
setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val));
Changing a datapath test from skb_shinfo(skb)->tx_flags to
skb->sk->sk_tsflags can change behavior in that case, as the tx_flags
is written before the second setsockopt updates sk_tsflags.
Therefore, only bits can be reclaimed that cannot be set by cmsg and
are also highly unlikely to be used to target individual packets
otherwise.
Free up the bit currently used for SKBTX_HW_TSTAMP_USE_CYCLES. This
selects between clock and free running counter source for HW TX
timestamps. It is probable that all packets of the same socket will
always use the same source.
Link: https://lore.kernel.org/netdev/cover.1739988644.git.pav@iki.fi/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250225023416.2088705-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yong-Hao Zou mentioned that linux was not strict as other OS in 3WHS,
for flows using TCP TS option (RFC 7323)
As hinted by an old comment in tcp_check_req(),
we can check the TSEcr value in the incoming packet corresponds
to one of the SYNACK TSval values we have sent.
In this patch, I record the oldest and most recent values
that SYNACK packets have used.
Send a challenge ACK if we receive a TSEcr outside
of this range, and increase a new SNMP counter.
nstat -az | grep TSEcrRejected
TcpExtTSEcrRejected 0 0.0
Due to TCP fastopen implementation, do not apply yet these checks
for fastopen flows.
v2: No longer use req->num_timeout, but treq->snt_tsval_first
to detect when first SYNACK is prepared. This means
we make sure to not send an initial zero TSval.
Make sure MPTCP and TCP selftests are passing.
Change MIB name to TcpExtTSEcrRejected
v1: https://lore.kernel.org/netdev/CADVnQykD8i4ArpSZaPKaoNxLJ2if2ts9m4As+=Jvdkrgx1qMHw@mail.gmail.com/T/
Reported-by: Yong-Hao Zou <yonghaoz1994@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225171048.3105061-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable Fixes:
* O_DIRECT writes should adjust file length
Other Bugfixes:
* Adjust delegated timestamps for O_DIRECT reads and writes
* Prevent looping due to rpc_signal_task() races
* Fix a deadlock when recovering state on a sillyrenamed file
* Properly handle -ETIMEDOUT errors from tlshd
* Suppress build warnings for unused procfs functions
* Fix memory leak of lsm_contexts
-----BEGIN PGP SIGNATURE-----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=Deh3
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
For devices that natively support zone append operations,
REQ_OP_ZONE_APPEND BIOs are not processed through zone write plugging
and are immediately issued to the zoned device. This means that there is
no write pointer offset tracking done for these operations and that a
zone write plug is not necessary.
However, when receiving a zone append BIO, we may already have a zone
write plug for the target zone if that zone was previously partially
written using regular write operations. In such case, since the write
pointer offset of the zone write plug is not incremented by the amount
of sectors appended to the zone, 2 issues arise:
1) we risk leaving the plug in the disk hash table if the zone is fully
written using zone append or regular write operations, because the
write pointer offset will never reach the "zone full" state.
2) Regular write operations that are issued after zone append operations
will always be failed by blk_zone_wplug_prepare_bio() as the write
pointer alignment check will fail, even if the user correctly
accounted for the zone append operations and issued the regular
writes with a correct sector.
Avoid these issues by immediately removing the zone write plug of zones
that are the target of zone append operations when blk_zone_plug_bio()
is called. The new function blk_zone_wplug_handle_native_zone_append()
implements this for devices that natively support zone append. The
removal of the zone write plug using disk_remove_zone_wplug() requires
aborting all plugged regular write using disk_zone_wplug_abort() as
otherwise the plugged write BIOs would never be executed (with the plug
removed, the completion path will never see again the zone write plug as
disk_get_zone_wplug() will return NULL). Rate-limited warnings are added
to blk_zone_wplug_handle_native_zone_append() and to
disk_zone_wplug_abort() to signal this.
Since blk_zone_wplug_handle_native_zone_append() is called in the hot
path for operations that will not be plugged, disk_get_zone_wplug() is
optimized under the assumption that a user issuing zone append
operations is not at the same time issuing regular writes and that there
are no hashed zone write plugs. The struct gendisk atomic counter
nr_zone_wplugs is added to check this, with this counter incremented in
disk_insert_zone_wplug() and decremented in disk_remove_zone_wplug().
To be consistent with this fix, we do not need to fill the zone write
plug hash table with zone write plugs for zones that are partially
written for a device that supports native zone append operations.
So modify blk_revalidate_seq_zone() to return early to avoid allocating
and inserting a zone write plug for partially written sequential zones
if the device natively supports zone append.
Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Link: https://lore.kernel.org/r/20250214041434.82564-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tariq Toukan says:
====================
mlx5-next updates 2025-02-24
The following pull-request contains common mlx5 updates
for your *net-next* tree.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Change POOL_NEXT_SIZE define value and make it global
net/mlx5: Add new health syndrome error and crr bit offset
====================
Link: https://patch.msgid.link/20250224212446.523259-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
