RET_OK is 0 and RET_FAIL is a -1, replace these custom returns with
a standard errno
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
use readl, writel to get and set the register instead.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
std.h introduces _TI_ _FLOAT_ _FIXED_ _TARGET_ ARG_TO_INT ARG_TO_PTR
which are no longer being used anywhere. we dont really need the
custom std.h header. remove it from the repo. where we need types,
introduce standard types.h
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kernel has it's own NULL define, we dont need to introduce our own
custom NULL type!
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bool has standard true and false, we dont need to introduce
our own TRUE and FALSE macros.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch renames the variables in the parameter lists and in the function
definitions to make them match.
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
validBit to valid_bit
victimEntryNum to victim_entry_num
virtualAddr to virtual_addr
xType to xtype
actualValue to actual_value
EASIL1_MMUMMU_IRQSTATUSReadRegister32 to easil1_mmummu_irqstatus_read_register32
EASIL1_MMUMMU_LOCKBaseValueWrite32 to easil1_mmummu_lock_base_value_write32
easiNum to easi_num
expectedValue to expected_value
invalidValue to invalid_value
L1_base to l1_base
L2_base to l2_base
lower16Bits to lower16_bits
lower8Bits to lower8_bits
lowerMiddle8Bits to lower_middle8_bits
lowerUpper8Bits to lower_upper8_bits
maxValidValue to max_valid_value
minValidValue to min_valid_value
newValue to new_value
returnCodeIfMismatch to return_code_if_mismatch
spyCodeIfMisMatch to spy_code_if_mis_match
upper16Bits to upper16_bits
upper8Bits to upper8_bits
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
ulBrdState to brd_state
ulChnl to chnl
ulDspAddr to dsp_add
ulDspDestAddr to dsp_dest_addr
ulDspLoadAddr to dsp_load_addr
ulDspRunAddr to dsp_run_addr
ulDspSrcAddr to dsp_src_addr
ulMapAttrs to map_attr
ulMemType to mem_type
ulRMSFxn to rms_fxn
ulStatus to ret
ulVirtAddr to virt_addr
uNumDesc to num_desc
uNumToDSP to num_to_dsp
uPaSize to pa_size
uPhase to phase
uSegId to segm_id
uStream1 to stream1
uStream2 to stream2
uZId to zid
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
segmentId to segmnt_id
SetPageDirty to set_page_dirty
sizeInBytes to size_in_bytes
sleepCode to sleep_code
Status to status
symName to sym_name
szVar to sz_var
Trapped_Args to trapped_args
TTBPhysAddr to ttb_phys_addr
uChirps to chirps
uChnlId to ch_id
uChnlID to ch_id
uContentSize to cont_size
uDDMAChnlId to ddma_chnl_id
uEvents to events
ulAlign to align_mask
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
puLen to len
pulEntry to entry_pt
pulFxnAddr to fxn_addr
pulId to chan_id
pulSegId to sgmt_id
pVaBuf to va_buf
pVirtualAddress to virtual_address
pwMbVal to mbx_val
pWord to word
pXlatorAttrs to xlator_attrs
registerFxn to register_fxn
rootPersistent to root_prstnt
sectionData to section_data
sectionInfo to section_info
sectionName to section_name
sectName to sec_name
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pstrFxn to str_fxn
pstrLibName to str_lib_name
pstrSect to str_sect
pstrSym to str_sym
pstrZLFileName to str_zl_file_name
pstrZLFile to str_zl_file
pszCoffPath to sz_coff_path
pszMode to sz_mode
pszName to sz_name
pszSectName to sz_sect_name
pszUuid to sz_uuid
pszZlDllName to sz_zl_dll_name
puAddr to addr
pulAddr to addr
pulBufSize to buff_size
pulBytes to nbytes
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pPhysAddr to phys_addr
pPhysicalAddress to physical_address
ppIntfFxns to if_fxns
pProcLoadStat to proc_load_stat
pProcStat to proc_lstat
ppSym to sym_val
pRefData to ref_data
pRef to ref
preservedBit to preserved_bit
pResult to result
procID to proc_id
pSectInfo to sect_inf
pSrc to src
pstrContent to str_content
pstrDummyFile to str_dummy_file
pstrExecFile to str_exec_file
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pMemStatBuf to mem_stat_buf
pMgrAttrs to mgr_attrts
pMgrInfo to mgr_info
pNodeEnv to node_env
pNodeId to node_uuid
pNodeInfo to node_info
pNumLibs to num_libs
pNumPersLibs to num_pers_libs
pObjDef to obj_def
pObjUuid to obj_uuid
poolPhysBase to pool_phys_base
poolSize to pool_size
pPctxt to pctxt
ppDevContext to dev_cntxt
ppDrvInterface to drv_intf
pPersistentDepLibs to prstnt_dep_libs
pPhyAddr to phy_addr
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
phNldrObj to nldr_ovlyobj
phNldr to nldr
phNodeMgr to node_man
pHostBuf to host_buf
pHostConfig to host_config
phRmmMgr to rmm_mgr
phStrmMgr to strm_man
phStrm to strm_objct
phXlator to xlator
physicalAddr to physical_addr
pInfo to channel_info
pIOC to chan_ioc
pLib to lib_obj
pList to lst
pMemBuf to mem_buf
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
phDevContext to device_ctx
phDevNode to dev_nde
phDevObject to device_obj
phDispObject to dispatch_obj
phDmmMgr to dmm_manager
phDrvObject to drv_obj
phDRVObject to drv_obj
phIOMgr to io_man
phLoader to loader
phManager to manager
phMgrObject to mgr_obj
phMgr to mgr
phMsgMgr to msg_man
phMsgQueue to msgq
phNldrNode to nldr_nodeobj
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pdwSize to buff_size
pdwState to board_state
pdwValue to value
pdwVersion to version
pElemExisting to elem_existing
pEntry to entry
pExists to exists
pfEnablePerf to enable_perf
pGenObj to gen_obj
phChnlMgr to channel_mgr
phChnl to chnl
phCodMgr to cod_mgr
phDCDHandle to dcd_handle
phDcdMgr to dcd_mgr
phDehMgr to deh_manager
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pArb to arb
pbAlreadyAttached to already_attached
pBaseAddr to base_addr
pbHostBuf to host_buff
pBufVa to buf_va
pChnlInfo to channel_info
pConfig to config_param
pContent to content
pContext to context
pdcdProps to dcd_prop
pDepLibUuids to dep_lib_uuids
pDevNodeString to dev_node_strg
pDispAttrs to disp_attrs
pDsp to dsp
pdwAutoStart to auto_start
pdwChnl to chnl
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
hStrm to stream_obj
iMode to io_mode
irqMask to irq_mask
lOffset to offset
memPtr to mem_ptr
moduleId to module_id
msgCallback to msg_callback
msgList to msg_list
nArgc to num_argc
nEntryStart to entry_start
nMemSpace to mem_space
nStatus to node_status
nStrms to strms
numLibs to num_libs
numLockedEntries to num_locked_entries
pageSize to page_sz
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
hDevContext to dev_ctxt
hDevExtension to dev_extension
hdevObject to device_obj
hDispObject to disp_obj
hDrVObject to driver_obj
hDRVObject to driver_obj
hMGRHandle to mgr_handle
hNldrObject to nldr
hNode1 to node1
hNode2 to node2
hNodeRes to node_resource
hPCtxt to process_ctxt
hProc to proc
hStreamHandle to stream_handle
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
dspAddr to dsp_address
dspAdr to dsp_adr
dspBaseVirt to dsp_base_virt
dwDeviceContext to device_context
dwDSPAddrOffset to dsp_addr_offset
dwDSPAddr to dsp_addr
dwErrInfo to error_info
dwGPPBaseBA to gpp_base_ba
dwMask to mask
dwTimeout to timeout
dwTimeOut to timeout
dwValue to value
entryNum to entry_num
execFile to exec_file
fFlush to flush_data
FlushMemType to flush_mem_type
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fix a compilation error in uuid_hex_to_bin
due to the patch "simplify and clean up"
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This core is found on some Freescale SoCs and also some Coldfire
SoCs. Support for Coldfire is missing though at the moment as
they have an older revision of the core which does not have RX FIFO
support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
and fix the broken case if a core's frequency depends on others.
trace_power_frequency was only implemented in a rather ungeneric
way in acpi-cpufreq driver's target() function only.
-> Move the call to trace_power_frequency to
cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
notifier is triggered.
This will support power frequency tracing by all cpufreq
drivers.
trace_power_frequency did not trace frequency changes correctly
when the userspace governor was used or when CPU cores'
frequency depend on each other.
-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
which gets switched automatically fixes this.
Robert Schoene provided some important fixes on top of my
initial quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id
[akpm@linux-foundation.org: build fix]
Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: davej@codemonkey.org.uk
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@codemonkey.org.uk>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Cc: Robert Schoene <robert.schoene@tu-dresden.de>
Tested-by: Robert Schoene <robert.schoene@tu-dresden.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29062
Reported-by: Andres Cimmarusti <acimmarusti@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Older firmwares fixed the middle byte of the Synaptics capabilities
query to 0x47, but starting with firmware 7.5 the middle byte
represents submodel ID, sometimes also called "dash number".
Reported-and-tested-by: Miroslav Šulc <fordfrog@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The kdb code should not toggle the sysrq state in case an end user
wants to try and resume the normal kernel execution.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Return the crtc_id, not the counter value. They are not
necessarily the same.
Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The commit 1e8655f873
drm/ttm: Fix build on architectures without AGP
looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h
Move the conditional inclusion of <asm/agp.h> *after* we have included
ttm_bo_driver.h
Signed-of-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add delay after turning off the LVDS encoder.
Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=16389
Tested-by: Jan Kreuzer <kontrollator@gmx.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
We only add/remove crtcs at driver load, you cannot remove when
the GPU is running a CS packet since the fd is open, when
GPU hotplugging on radeons actually is needed all this locking
needs a review and I've started re-working kms core locking to deal
with this better. But for now avoid long delays in CS processing when
hotplug detect is happening in a different thread.
this fixes a regression introduced with hotplug detection.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit 64deb6efdc changed the way status
read buffers are handled but forgot to adjust the mempool to the new
size. Add the call to resize the mempool after the exchange config
data. Also use the define instead of the hard coded number in the fsf
callback for consistency.
Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Trying to read the FC host statistics on an offline adapter results in
a 5 seconds wait. Reading the statistics tries to issue an exchange
port data request which first waits up to 5 seconds for an entry in
the request queue.
Change the strategy for getting a free SBAL to exit when the queue is
stopped. Reading the statistics will then fail without the wait.
Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
A false check was performed whether an unchained ct_els
is possible or not.
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Add and use a few neatening macros
Remove PFX
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert printk(KERN_ERR to pr_err(
$ size drivers/net/qlge/built-in.o.*
text data bss dec hex filename
116456 2312 25712 144480 23460 drivers/net/qlge/built-in.o.old
114909 2312 25728 142949 22e65 drivers/net/qlge/built-in.o.new
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was possible to overflow the buffer used to print out the formatted
version of the resource path. The fix is to limit the number of
bytes that get formatted.
This patch also updates the ipr_show_resource_path function to display the
resource address for devices that are attached to adapters that don't
support resource paths.
Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Some ixgbe cards put an invalid VF device ID in the PCIe SR-IOV
capability. The ixgbe driver is only valid for PFs or non SR-IOV
hardware. It seems that the same problem could occur on igb hardware as
well, so if we discover we are trying to initialize a VF in ixbge_probe
or igb_probe, print an error and exit.
Based on a patch for ixgbe from Chris Wright <chrisw@sous-sol.org>.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ioremap() fails with a NULL pointer, catch the error and pass it
to the caller of create_qp() or create_cq() instead of trying to
dereference the NULL pointer later on.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
We used to allow only full specification, or using all contexts within
an HCA before moving to the next HCA. We now allow an additional
method -- round-robining through HCAs -- and make that the default.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Turn off IB latency mode. This improves link quality for slower
process chips.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
When the default llseek action gets changed to no_llseek, all file
systems relying on the current behaviour need to set explicit .llseek
operations.
In case of qib_fs, we want the files to be seekable, so
generic_file_llseek fits best.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
CHECK drivers/net/wireless/b43/main.c
drivers/net/wireless/b43/main.c:111:5: warning: symbol 'b43_modparam_pio' was not declared. Should it be static?
CHECK drivers/net/wireless/b43/phy_g.c
drivers/net/wireless/b43/phy_g.c:975:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff)
CHECK drivers/net/wireless/b43/phy_lp.c
drivers/net/wireless/b43/phy_lp.c:2701:6: warning: symbol 'b43_lpphy_op_switch_analog' was not declared. Should it be static?
drivers/net/wireless/b43/phy_lp.c:1148:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff)
drivers/net/wireless/b43/phy_lp.c:1525:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff)
drivers/net/wireless/b43/phy_lp.c:1529:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff)
CHECK drivers/net/wireless/b43/wa.c
drivers/net/wireless/b43/wa.c:385:60: warning: cast truncates bits from constant value (ffff00ff becomes ff)
drivers/net/wireless/b43/wa.c:403:55: warning: cast truncates bits from constant value (ffff00ff becomes ff)
drivers/net/wireless/b43/wa.c:405:55: warning: cast truncates bits from constant value (ffff00ff becomes ff)
drivers/net/wireless/b43/wa.c:415:71: warning: cast truncates bits from constant value (ffff0fff becomes fff)
AFAICT, none of these amount to real bugs. But this reduces warning
spam from sparse w/o significantly affecting readability of the code (IMHO).
Signed-off-by: John W. Linville <linville@tuxdriver.com>
T4 EQ entries are in multiples of 64 bytes. Currently the RDMA SQ and
RQ use fixed sized entries composed of 4 EQ entries for the SQ and 2
EQ entries for the RQ. For optimial latency with small IO, we need to
change this so the HW only needs to DMA the EQ entries actually used
by a given work request.
Implementation:
- add wq_pidx counter to track where we are in the EQ. cidx/pidx are
used for the sw sq/rq tracking and flow control.
- the variable part of work requests is the SGL. Add new functions to
build the SGL and/or immediate data directly in the EQ memory
wrapping when needed.
- adjust the min burst size for the EQ contexts to 64B.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Get rid of own implementation of hex_to_bin().
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Advance a module version to 1.52.53-2.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug fix: Protect statistics ramrod sending code and a statistics counter update
with a spinlock. Otherwise there was a race condition that would allow sending
a statistics ramrods with the same sequence number or with sequence numbers not
in a natural order, which would cause a FW assert.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug fix: Protect the statistics state machine state update with a
spinlock. Otherwise there was a race condition that would cause the
statistics to stay enabled despite the fact that they were disabled in
the LINK_DOWN event handler.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
