There are few places where ANI is started without checking
if it is right to start. This might lead to a case where ani
timer would be left undeleted and cause improper memory acccess
during module unload. This bug is clearly exposed with
paprd support where the driver detects tx hang and does a
chip reset. During this reset ani is (re)started without checking
if it needs to be started. This would leave a timer scheduled
even after all the resources are freed and cause a panic.
This patch introduces a bit in sc_flags to indicate if ani
needs to be started in sw_scan_start() and ath_reset().
This would fix the following panic. This issue is easily seen
with ar9003 + paprd.
BUG: unable to handle kernel paging request at 0000000000003f38
[<ffffffff81075391>] ? __queue_work+0x41/0x50
[<ffffffff8106afaa>] run_timer_softirq+0x17a/0x370
[<ffffffff81088be8>] ? tick_dev_program_event+0x48/0x110
[<ffffffff81061f69>] __do_softirq+0xb9/0x1f0
[<ffffffff810ba060>] ? handle_IRQ_event+0x50/0x160
[<ffffffff8100af5c>] call_softirq+0x1c/0x30
[<ffffffff8100c9f5>] do_softirq+0x65/0xa0
[<ffffffff81061e25>] irq_exit+0x85/0x90
[<ffffffff8155e095>] do_IRQ+0x75/0xf0
[<ffffffff815570d3>] ret_from_intr+0x0/0x11
<EOI>
[<ffffffff812fd67b>] ? acpi_idle_enter_simple+0xe4/0x119
[<ffffffff812fd674>] ? acpi_idle_enter_simple+0xdd/0x119
[<ffffffff81441c87>] cpuidle_idle_call+0xa7/0x140
[<ffffffff81008da3>] cpu_idle+0xb3/0x110
[<ffffffff81550722>] start_secondary+0x1ee/0x1f5
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Some vendors require the LED to be ON always irrespective of any
radio activity. Introducing a module parameter to disable blinking,
so that one can choose between always on or led blink during
activity.
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Without this we could start trying to work with the device without
it being fully functional yet and loose some packets upon resume.
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Madhan Jaganathan <madhan.jaganathan@atheros.com>
signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The array we use will vary depending on whether or not we are
to go to lower power or not. The default values (iniPcieSerdes)
are a copy or what go into the registers through the INI files.
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Madhan Jaganathan <madhan.jaganathan@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This can be useful during testing of new ASPM tweaks which often
have to be done through the PCI Serializer-Deserializer (SERDES).
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Madhan Jaganathan <madhan.jaganathan@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The LowPower array writes disables the PLL when ASPM is enabled.
The host driver makes quite a few calls to ath9k_hw_configpcipowersave()
and these same calls also need to ensure the PLL is off when they issue
it.
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Madhan Jaganathan <madhan.jaganathan@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The AR_WA register should not be read when in sleep state so
add a variable we can stash its value into for when we need
to set it. Additionally the AR_WA_D3_TO_L1_DISABLE_REAL
(bit 16) needs to be removed.
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Madhan Jaganathan <madhan.jaganathan@atheros.com>
signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Added 11d support for libertas driver using cfg80211. This is based on Holger
Shurig's initial work to add cfg80211 support libertas.
(https://patchwork.kernel.org/patch/64286/)
Please let us know, if there are any improvements comments.
Code is added to send 11d enable command to firmware while
initialisation and pass 11d specific information to firmware
when notifier handler is called by cfg80211.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
In following scenarios WARN_ON() in cfg80211 code was triggered.
a) Driver unload or card removal.
b) Disconnect from infra network
c) Adhoc start/join
d) Adhoc stop
Added following fixes to avoid WARN_ON() in cfg80211 code.
a) Ensured that cfg80211_disconnected() function defined in cfg80211
code will be called only in infra mode.
b) Solved timing issue by moving cfg80211_disconnected() call inside
lbs_cfg_disconnect().
c) Updated "wdev->ssid" in driver code after Adhoc join/start
d) Removed unnecessory cfg80211_disconnected() call in lbs_remove_card.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Holger Schurig's patch (https://patchwork.kernel.org/patch/64286/)
is rebased to latest wireless-testing tree.
(Includes patches from me originally posted as "libertas: fix build
error due to undefined symbol" and "libertas: unmangle capability
value". -- JWL)
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Tested-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Disable statistics initialization for eth clients that do not support
statistics. This prevents memory corruption on bnx2x hw.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
netxen_nic and qlcnic driver depends on firmware_class module.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanse found that tsc is dereferenced earlier than checked for being
NULL in tps6507x_ts_remove. Remove the test because there is no way
for tsc to be NULL there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Get rid of the last occurances of _v1 suffixes, and move the version
number right after the "uac" string. Now things are consitent again.
Sorry for the forth and back, but it just looks much nicer this way.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
virtio-pci resets the device at startup by writing to the status
register, but this does not clear the pci config space,
specifically msi enable status which affects register
layout.
This breaks things like kdump when they try to use e.g. virtio-blk.
Fix by forcing msi off at startup. Since pci.c already has
a routine to do this, we export and use it instead of duplicating code.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
add_buf returns ring size on out of memory,
this is not what devices expect.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org # .34.x
Not changed PSDevice priv struct, just fixed style and removed printks.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move functions managing the channel mapping to a new channel.c file, as done in
the staging VT6656 driver. The function names contained in card.c were prefixed
with CARD followed by the first letter of the return code, remove this and use
more coherent function names.
The following functions moved and were renamed:
ChannelValid -> is_channel_valid
CARDbSetChannel -> set_channel
CARDvInitChannelTable -> init_channel_table
CARDbyGetChannelMapping -> get_channel_mapping
CARDvSetCountryInfo -> set_country_info
CARDbySetSupportChannels -> set_support_channels
CARDbChannelGetList -> channel_get_list
CARDvSetCountryIE -> set_country_IE
CARDbGetChannelMapInfo -> get_channel_map_info
CARDvSetChannelMapInfo -> set_channel_map_info
CARDvClearChannelMapInfo -> clear_channel_map_info
CARDbyAutoChannelSelect -> auto_channel_select
CARDbyGetChannelNumber -> get_channel_number
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed code in .c files that was being skipped by the preprocessor
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A patch for s626.c to fix some of the warnings
reported by the checkpatch.pl tool, namely,
-suspect code indent for conditional statements
-please, no space before tabs
Signed-off-by: John Sheehan <john.d.sheehan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A patch for s626.c to fix errors reported by
checkpatch.pl tool, namely,
-code indent should use tabs where possible
-"foo * bar" should be "foo *bar"
-trailing statements should be on next line
Signed-off-by: John Sheehan <john.d.sheehan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all code which is dead for in-kernel driver due to being
ifdefed by LINUX_VERSION_CODE.
While at it, also remove surrounding code which is commented out,
or '#if 1' nops.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed several witespace and tab related warnings and errors reported by the
chechpatch.pl tool.
Signed-off-by: Matti Lammi <mattij.lammi@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed coding convention issues as reported by checkpatch.pl tool
on the file `panel.c'. Moved LCD special code handling from the
function `lcd_write' into function `handle_lcd_special_code'. Also
moved the handling of INPUT_ST_HIGH and INPUT_ST_FALLING states from
the function `panel_process_input' into functions `input_state_high'
and `input_state_falling'.
Signed-off-by: Henri Häkkinen <henuxd@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_cs.c file that fixes the space
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Getting a probe response after sending a probe request to a specific SSID
doesnt mean we're trying to associate with this SSID.
wpa_supplicant should be the only one deciding when to join an SSID, not the
kernel.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we're not associated, we should not send wireless events to let userspace
know that we just left an ESSID, simply because we havent yet joined it.
If we keep on doing that, wpa_supplicant could receive such events while
actually trying to join an ESSID, and thus decide to stop trying. This leads
to a lot of connection failures as this driver seems to be sending GIWAP
events quite a lot.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Toggling the link carrier is a non sense and is the grossest locking I can
think of. Moreover, it's giving a completely inaccurate status to userspace
who could for example decide to turn the interface down on carrier off
detection.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
While merging rt30[79]0 support into rt28[67]0, drivers/staging/rt3070/md4.h
has been forgotten, while it isn't referenced from the remaining drivers
anymore; remove it.
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Matti Lammi <mattij.lammi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I have fixed all errors in mlme.h and fixed all bar one in rtmp.h.
I think I can fix rtmp.h too by moving a brace up two lines, I just dont know if it will work.
If someone can confirm it will work I will change it.
Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
VBIOS_VER_MAX_LENGTH was set to 4, but the value "0.84" is strcpy'd
into it. That value is 5 long including the trailing NULL.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove 2 extern variables definations from XGI_accel.c that were
defined in other .h files.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code inside this #ifdef declared a couple extern functions that
weren't used anywhere, so remove the whole #ifdef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was not included anywhere and just defined a debugging macro.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes all the remaining typedefs in vb_struct.h
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is no need for these to be typedefs as a simple enum will do.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
