Commit graph

1,042,910 commits

Author SHA1 Message Date
James Smart
a5b141a895 scsi: lpfc: Add support for optional PLDV handling
At adapter attachment or SLI port initialization, read the SLIPORT_STATUS
register to check for pldv_enable. If found, the driver will perform a PCIe
configuration space write when attaching to an SLI port instance that is an
LPe32000 series adapter.

Link: https://lore.kernel.org/r/20210927183518.22130-1-jsmart2021@gmail.com
Co-developed-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 23:28:07 -04:00
Rahul Lakkireddy
79a7482249 scsi: csiostor: Add module softdep on cxgb4
Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.

When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.

Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.

Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com
Fixes: a3667aaed5 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 23:26:42 -04:00
Anders Roxell
60c98a87fc scsi: ufs: core: SCSI_UFS_HWMON depends on HWMON=y
When building an allmodconfig kernel, the following build error shows up:

aarch64-linux-gnu-ld: drivers/scsi/ufs/ufs-hwmon.o: in function `ufs_hwmon_probe':
/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:177: undefined reference to `hwmon_device_register_with_info'
/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:177:(.text+0x510): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `hwmon_device_register_with_info'
aarch64-linux-gnu-ld: drivers/scsi/ufs/ufs-hwmon.o: in function `ufs_hwmon_remove':
/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:195: undefined reference to `hwmon_device_unregister'
/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:195:(.text+0x5c8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `hwmon_device_unregister'
aarch64-linux-gnu-ld: drivers/scsi/ufs/ufs-hwmon.o: in function `ufs_hwmon_notify_event':
/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:206: undefined reference to `hwmon_notify_event'
/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:206:(.text+0x64c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `hwmon_notify_event'
aarch64-linux-gnu-ld: /home/anders/src/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:209: undefined reference to `hwmon_notify_event'
/kernel/next/drivers/scsi/ufs/ufs-hwmon.c:209:(.text+0x66c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `hwmon_notify_event'

Since SCSI_UFS_HWMON can't be built as a module, SCSI_UFS_HWMON has to
depend on HWMON=y.

Link: https://lore.kernel.org/r/20210927084615.1938432-1-anders.roxell@linaro.org
Fixes: e88e2d3220 ("scsi: ufs: core: Probe for temperature notification support")
Also-reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 23:24:10 -04:00
Colin Ian King
5860d9fb56 scsi: lpfc: Return NULL rather than a plain 0 integer
Function lpfc_sli4_perform_vport_cvl() returns a pointer to struct
lpfc_nodelist so returning a plain 0 integer isn't good practice.  Fix this
by returning a NULL instead.

Link: https://lore.kernel.org/r/20210925224113.183040-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 23:21:36 -04:00
Cai Huoqing
9f80eca441 scsi: aic7xxx: Fix a function name in comments
Use dma_alloc_coherent() instead of pci_alloc_consistent().

Link: https://lore.kernel.org/r/20210925132931.95-1-caihuoqing@baidu.com
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 23:19:18 -04:00
Cai Huoqing
8d807a0680 scsi: lpfc: Fix a function name in comments
Use dma_map_sg() instead of pci_map_sg() in comments.

Link: https://lore.kernel.org/r/20210925125324.1760-3-caihuoqing@baidu.com
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 23:18:06 -04:00
Len Baker
568778f557 scsi: advansys: Prefer struct_size() over open-coded arithmetic
As noted in the "Deprecated Interfaces, Language Features, Attributes, and
Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead to
values wrapping around and a smaller allocation being made than the caller
was expecting. Using those allocations could lead to linear overflows of
heap memory and other misbehaviors.

Use the struct_size() helper to do the arithmetic instead of the argument
"size + count * size" in the kzalloc() function.

This code was detected with the help of Coccinelle and audited and fixed
manually.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments

Link: https://lore.kernel.org/r/20210925114205.11377-1-len.baker@gmx.com
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 22:54:55 -04:00
Arun Easi
8e2d81c6b5 scsi: qla2xxx: Fix excessive messages during device logout
Disable default logging of some I/O path messages. If desired, the messages
can be turned back on by setting ql2xextended_error_logging.

Link: https://lore.kernel.org/r/20210925035154.29815-1-njavali@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 22:49:25 -04:00
Colin Ian King
cced4c0ec7 scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"
There are a couple of spelling mistakes in pr_info and pr_err messages.
Fix them.

Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 22:47:28 -04:00
Krzysztof Kozlowski
ce580e47e8 scsi: ufs: exynos: Unify naming
Use "Samsung" and "Exynos", not the uppercase versions.

Link: https://lore.kernel.org/r/20210924132658.109814-2-krzysztof.kozlowski@canonical.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 22:45:43 -04:00
Jiapeng Chong
dd689ed5aa scsi: ses: Fix unsigned comparison with less than zero
Fix the following coccicheck warning:

./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared
with zero: result > 0.

Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 22:42:06 -04:00
Jonathan Hsu
e8c2da7e32 scsi: ufs: Fix illegal offset in UPIU event trace
Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace().

Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com
Fixes: 4b42d557a8 ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs")
Cc: stable@vger.kernel.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jonathan Hsu <jonathan.hsu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28 22:37:40 -04:00
Wen Xiong
fbdac19e64 scsi: ses: Retry failed Send/Receive Diagnostic commands
Setting SCSI logging level with error=3, we saw some errors from enclosues:

[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13

Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).

Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com
Reviewed-by: Brian King <brking@linux.ibm.com>
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:36:40 -04:00
James Smart
efe1dc571a scsi: lpfc: Fix mailbox command failure during driver initialization
Contention for the mailbox interface may occur during driver initialization
(immediately after a function reset), between mailbox commands initiated
via ioctl (bsg) and those driver requested by the driver.

After setting SLI_ACTIVE flag for a port, there is a window in which the
driver will allow an ioctl to be initiated while the adapter is
initializing and issuing mailbox commands via polling. The polling logic
then gets confused.

Correct by having thread setting SLI_ACTIVE spot an active mailbox command
and allow it complete before proceeding.

Link: https://lore.kernel.org/r/20210921143008.64212-1-jsmart2021@gmail.com
Co-developed-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: Nigel Kirkland <nkirkland2304@gmail.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:22:12 -04:00
Tong Zhang
cbd9a3347c scsi: dc395: Fix error case unwinding
dc395x_init_one()->adapter_init() might fail. In this case, the acb is
already cleaned up by adapter_init(), no need to do that in
adapter_uninit(acb) again.

[    1.252251] dc395x: adapter init failed
[    1.254900] RIP: 0010:adapter_uninit+0x94/0x170 [dc395x]
[    1.260307] Call Trace:
[    1.260442]  dc395x_init_one.cold+0x72a/0x9bb [dc395x]

Link: https://lore.kernel.org/r/20210907040702.1846409-1-ztong0001@gmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:19:51 -04:00
Colin Ian King
9a8ef2c73c scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
There is a spelling mistake in a dev_err message. Fix it.

Link: https://lore.kernel.org/r/20210920183206.17477-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:17:29 -04:00
Arnd Bergmann
a38923f2d0 scsi: lpfc: Fix gcc -Wstringop-overread warning, again
I fixed a stringop-overread warning earlier this year, now a second copy of
the original code was added and the warning came back:

drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_cmf_info_show':
drivers/scsi/lpfc/lpfc_attr.c:289:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread]
  289 |                         strnlen(LPFC_INFO_MORE_STR, PAGE_SIZE - 1),
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix it the same way as the other copy.

Link: https://lore.kernel.org/r/20210920095628.1191676-1-arnd@kernel.org
Fixes: ada48ba70f ("scsi: lpfc: Fix gcc -Wstringop-overread warning")
Fixes: 74a7baa2a3 ("scsi: lpfc: Add cmf_info sysfs entry")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:16:38 -04:00
Dan Carpenter
6dacc371b7 scsi: lpfc: Use correct scnprintf() limit
The limit should be "PAGE_SIZE - len" instead of "PAGE_SIZE".  We're not
going to hit the limit so this fix will not affect runtime.

Link: https://lore.kernel.org/r/20210916132331.GE25094@kili
Fixes: 5b9e70b22c ("scsi: lpfc: raise sg count for nvme to use available sg resources")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:15:05 -04:00
Dan Carpenter
cdbc16c552 scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
This scnprintf() uses the wrong limit.  It should be
"LPFC_FPIN_WWPN_LINE_SZ - len" instead of LPFC_FPIN_WWPN_LINE_SZ.

Link: https://lore.kernel.org/r/20210916132251.GD25094@kili
Fixes: 428569e66f ("scsi: lpfc: Expand FPIN and RDF receive logging")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:14:34 -04:00
Hannes Reinecke
a4869faf96 scsi: core: Remove 'current_tag'
The 'current_tag' field in struct scsi_device is unused now; remove it.

Link: https://lore.kernel.org/r/1631696835-136198-4-git-send-email-john.garry@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:13:38 -04:00
Hannes Reinecke
756fb6a895 scsi: acornscsi: Remove tagged queuing vestiges
The acornscsi driver has a config option to enable tagged queuing, but this
option gets disabled in the driver itself with the comment 'needs to be
debugged'.  As this is a _really_ old driver I doubt anyone will be wanting
to invest time here, so remove the tagged queue vestiges and make our lives
easier.

[jpg: Use scsi_cmd_to_rq()]

Link: https://lore.kernel.org/r/1631696835-136198-3-git-send-email-john.garry@huawei.com
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:13:38 -04:00
Hannes Reinecke
bc41fcbffd scsi: fas216: Kill scmd->tag
The driver is attempting to allocate a tag internally which is a no-go with
blk-mq. Switch the driver to use the request tag and kill usage of
scmd->tag and scmd->device->current_tag.

[jpg: Change to use scsi_cmd_to_rq()]

Link: https://lore.kernel.org/r/1631696835-136198-2-git-send-email-john.garry@huawei.com
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:13:38 -04:00
Avri Altman
322c4b29ee scsi: ufs: core: Add temperature notification exception handling
The device may notify the host of an extreme temperature by using the
exception event mechanism. The exception can be raised when the device’s
Tcase temperature is either too high or too low.

It is essentially up to the platform to decide what further actions need to
be taken. leave a placeholder for a designated vop for that.

Link: https://lore.kernel.org/r/20210915060407.40-3-avri.altman@wdc.com
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:07:42 -04:00
Avri Altman
e88e2d3220 scsi: ufs: core: Probe for temperature notification support
Probe the dExtendedUFSFeaturesSupport register for the device's temperature
notification support and, if supported, add a hardware monitor device.

Link: https://lore.kernel.org/r/20210915060407.40-2-avri.altman@wdc.com
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:07:42 -04:00
Dmitry Bogdanov
e76b7c5e25 scsi: efct: Decrease area under spinlock
Under the session level spinlock node->active_ios_lock in
efct_scsi_io_alloc() we are taking another spinlock for the port.  This
leads to contention between sessions and even between I/Os in the same
session.

Reduce the locked region to active_ios list for which active_ios_lock is
intended. Spinlock CPU usage decreases from 18% down to 13%. IOPS are
increased from 220 kIOPS to 264 kIOPS for one LUN.

Link: https://lore.kernel.org/r/20210914105539.6942-4-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:04:56 -04:00
Dmitry Bogdanov
ee3dce9f38 scsi: efct: Fix nport free
nport_free for an empty nport hangs the state machine waiting for mbox
completion if nport is not yet attached thinking that it is attaching right
now.  Add a check for nport attaching state and complete nport free.

Link: https://lore.kernel.org/r/20210914105539.6942-3-d.bogdanov@yadro.com
Reviewed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:04:55 -04:00
Dmitry Bogdanov
8d4efd0040 scsi: efct: Add state in nport sm trace printout
Similar to other state machine traces and to make debug easier, add the
state name to nport sm trace printout.

Link: https://lore.kernel.org/r/20210914105539.6942-2-d.bogdanov@yadro.com
Reviewed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-22 00:04:55 -04:00
Dmitry Bogdanov
5f85790388 scsi: qla2xxx: Restore initiator in dual mode
In dual mode in case of disabling the target, the whole port goes offline
and initiator is turned off too.

Fix restoring initiator mode after disabling target in dual mode.

Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com
Fixes: 0645cb8350 ("scsi: qla2xxx: Add mode control for each physical port")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-21 23:58:57 -04:00
Bart Van Assche
d04a968c33 scsi: ufs: core: Unbreak the reset handler
A command tag is passed as the second argument of the
__ufshcd_transfer_req_compl() call in ufshcd_eh_device_reset_handler()
instead of a bitmask. Fix this by passing a bitmask as argument instead of
a command tag.

Link: https://lore.kernel.org/r/20210916175408.2260084-1-bvanassche@acm.org
Fixes: a45f937110 ("scsi: ufs: Optimize host lock on transfer requests send/compl paths")
Cc: Can Guo <cang@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-21 23:56:19 -04:00
Bart Van Assche
a7c0520669 scsi: core: Remove include <scsi/scsi_host.h> from scsi_cmnd.h
There are no dependencies in <scsi/scsi_cmnd.h> on the <scsi/scsi_host.h>
header file. Hence remove the scsi_host.h include directive from
scsi_cmnd.h. This include directive was introduced in February 2021 by
commit af1830956d ("scsi: core: Add mq_poll support to SCSI layer").

Link: https://lore.kernel.org/r/20210917212751.2676054-1-bvanassche@acm.org
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-21 23:54:44 -04:00
Bart Van Assche
1d479e6c9c scsi: sd_zbc: Support disks with more than 2**32 logical blocks
This patch addresses the following Coverity report about the zno *
sdkp->zone_blocks expression:

CID 1475514 (#1 of 1): Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
overflow_before_widen: Potentially overflowing expression zno *
sdkp->zone_blocks with type unsigned int (32 bits, unsigned) is evaluated
using 32-bit arithmetic, and then used in a context that expects an
expression of type sector_t (64 bits, unsigned).

Link: https://lore.kernel.org/r/20210917212314.2362324-1-bvanassche@acm.org
Fixes: 5795eb4430 ("scsi: sd_zbc: emulate ZONE_APPEND commands")
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-21 23:52:55 -04:00
Adrian Hunter
88b099006d scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
This reverts commit a113eaaf86.

There are a couple of issues with the commit:

 1. It causes deadlocks.

 2. It causes the shost->eh_cmd_q list of failed requests not to be
    processed, ever.

So revert it.

1. Deadlocks

The SCSI error handler runs with requests blocked beginning when
scsi_schedule_eh() sets SHOST_RECOVERY state, continuing through
scsi_error_handler() callback ->eh_strategy_handler() until
scsi_restart_operations() is called.  By setting eh_strategy_handler to
ufshcd_err_handler, the patch changed the UFS error handler to run with
requests blocked, including PM requests, for the entire run of the error
handler.

That conflicts with UFS error handler existing synchronization with UFS
device PM operations.  The UFS error handler synchronizes with runtime PM
by doing pm_runtime_get_sync() prior to blocking requests itself.  It
synchronizes with system PM by use of hba->host_sem, again before blocking
requests itself.  However, if requests are already blocked, then PM
operations will block.  So:

   the UFS error handler blocks waiting on PM
 + PM blocks waiting on SCSI PM requests to process or fail
 + PM requests are blocked waiting on error handling to finish
 =  deadlock

This happens both for runtime PM and system PM.

Prior to the patch, these deadlocks could not happen even if SCSI error
handling was running, because the presence of requests in shost->eh_cmd_q
would mean the queues could not be suspended, which would mean that, should
the UFS error handler run at the same time, it would not need to wait for
PM or vice versa.

Please note these scenarios are not just theoretical, they were found
during testing on a Samsung Galaxy Book S.

2. ->eh_strategy_handler() must process shost->eh_cmd_q list of failed
requests, as all other eh_strategy_handler's do except UFS error handler.
Refer for example: scsi_unjam_host(), ata_scsi_error() and
sas_scsi_recover_host().

Link: https://lore.kernel.org/r/20210917144349.14058-1-adrian.hunter@intel.com
Fixes: a113eaaf86 ("scsi: ufs: Synchronize SCSI and UFS error handling")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-21 23:48:14 -04:00
Li Feng
7e642ca037 scsi: target: Remove unused function arguments
The se_cmd is unused in these functions, just remove it.

Link: https://lore.kernel.org/r/20210913083045.3670648-1-fengli@smartx.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Li Feng <fengli@smartx.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:41:24 -04:00
Peter Wang
aba3b0757b scsi: ufs: ufs-mediatek: Change dbg select by check IP version
Mediatek UFS dbg select setting is changed in new IP version.  Check the IP
version before setting dbg select.

Link: https://lore.kernel.org/r/1630918387-8333-1-git-send-email-peter.wang@mediatek.com
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:38:58 -04:00
Daejun Park
351b3a849a scsi: ufs: ufshpb: Use proper power management API
In ufshpb, pm_runtime_{get,put}_sync() are used to avoid unwanted runtime
suspend during query requests. Whereas commit b294ff3e34 ("scsi: ufs:
core: Enable power management for wlun") modified the driver core to use
ufshcd_rpm_{get,put}_sync() APIs.

Switch to these APIs in HPB module as well.

Link: https://lore.kernel.org/r/20210902003534epcms2p1937a0f0eeb48a441cb69f5ef13ff8430@epcms2p1
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:38:58 -04:00
ChanWoo Lee
c4adf171e8 scsi: ufs: ufs-qcom: Remove unneeded variable 'err'
'err' is never set in this functon. Remove the declaration and just return
0.

Link: https://lore.kernel.org/r/20210907044111.29632-1-cw9316.lee@samsung.com
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:38:58 -04:00
Muneendra Kumar
e9d73bfa8e scsi: documentation: Document Fibre Channel sysfs node for appid
Update documentation for sysfs node within /sys/class/fc/fc_udev_device/.

Link: https://lore.kernel.org/r/20210913015853.2086512-1-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:38:58 -04:00
Len Baker
0a5e20fc8c scsi: elx: libefc: Prefer kcalloc() over open coded arithmetic
As noted in the "Deprecated Interfaces, Language Features, Attributes, and
Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead to
values wrapping around and a smaller allocation being made than the caller
was expecting. Using those allocations could lead to linear overflows of
heap memory and other misbehaviors.

Use the purpose specific kcalloc() function instead of the argument count *
size in the kzalloc() function.

[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments

Link: https://lore.kernel.org/r/20210905062448.6587-1-len.baker@gmx.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:22 -04:00
James Smart
0d6b26795b scsi: lpfc: Update lpfc version to 14.0.0.2
Update lpfc version to 14.0.0.2.

Link: https://lore.kernel.org/r/20210910233159.115896-15-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:22 -04:00
James Smart
315b3fd135 scsi: lpfc: Improve PBDE checks during SGL processing
The PBDE feature, setting payload buffer address explicitly in the WQE so
it doesn't have to be fetched from the SGL, only makes sense when there is
a single buffer for the I/O. When there are multiple buffers it actually
hurts performance as the SGL subsequently has to be fetched.

Rework the SGL logic to only use PBDE when a single buffer.

Link: https://lore.kernel.org/r/20210910233159.115896-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:22 -04:00
James Smart
afd63fa511 scsi: lpfc: Zero CGN stats only during initial driver load and stat reset
Currently congestion management framework results are cleared whenever the
framework settings changed (such as it being turned off then back on). This
unfortunately means prior stats, rolled up to higher time windows lose
meaning.

Change such that stats are not cleared. Thus they pause and resume with
prior values still being considered.

Link: https://lore.kernel.org/r/20210910233159.115896-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
3ea998cbf9 scsi: lpfc: Fix I/O block after enabling managed congestion mode
If the congestion management framework dynamically enables, it may do so
while I/O is in flight. The updates of cmf info due to inflight I/O
completing may happen before values have been initialized.

Fix by ensure cmf_max_bytes_per_interval is initialized when checking
bandwidth utilization for SCSI layer blocking.

Link: https://lore.kernel.org/r/20210910233159.115896-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
d5ac69b332 scsi: lpfc: Adjust bytes received vales during cmf timer interval
The newly added congestion mgmt framework is seeing unexpected congestion
FPINs and signals.  In analysis, time values given to the adapter are not
at hard time intervals. Thus the drift vs the transfer count seen is
affecting how the framework manages things.

Adjust counters to cover the drift.

Link: https://lore.kernel.org/r/20210910233159.115896-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
25ac2c970b scsi: lpfc: Fix EEH support for NVMe I/O
Injecting errors on the PCI slot while the driver is handling NVMe I/O will
cause crashes and hangs.

There are several rather difficult scenarios occurring. The main issue is
that the adapter can report a PCI error before or simultaneously to the PCI
subsystem reporting the error. Both paths have different entry points and
currently there is no interlock between them. Thus multiple teardown paths
are competing and all heck breaks loose.

Complicating things is the NVMs path. To a large degree, I/O was able to be
shutdown for a full FC port on the SCSI stack. But on NVMe, there isn't a
similar call. At best, it works on a per-controller basis, but even at the
controller level, it's a controller "reset" call. All of which means I/O is
still flowing on different CPUs with reset paths expecting hw access
(mailbox commands) to execute properly.

The following modifications are made:

 - A new flag is set in PCI error entrypoints so the driver can track being
   called by that path.

 - An interlock is added in the SLI hw error path and the PCI error path
   such that only one of the paths proceeds with the teardown logic.

 - RPI cleanup is patched such that RPIs are marked unregistered w/o mbx
   cmds in cases of hw error.

 - If entering the SLI port re-init calls, a case where SLI error teardown
   was quick and beat the PCI calls now reporting error, check whether the
   SLI port is still live on the PCI bus.

 - In the PCI reset code to bring the adapter back, recheck the IRQ
   settings. Different checks for SLI3 vs SLI4.

 - In I/O completions, that may be called as part of the cleanup or
   underway just before the hw error, check the state of the adapter.  If
   in error, shortcut handling that would expect further adapter
   completions as the hw error won't be sending them.

 - In routines waiting on I/O completions, which may have been in progress
   prior to the hw error, detect the device is being torn down and abort
   from their waits and just give up. This points to a larger issue in the
   driver on ref-counting for data structures, as it doesn't have
   ref-counting on q and port structures. We'll do this fix for now as it
   would be a major rework to be done differently.

 - Fix the NVMe cleanup to simulate NVMe I/O completions if I/O is being
   failed back due to hw error.

 - In I/O buf allocation, done at the start of new I/Os, check hw state and
   fail if hw error.

Link: https://lore.kernel.org/r/20210910233159.115896-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
cd8a36a90b scsi: lpfc: Fix FCP I/O flush functionality for TMF routines
A prior patch inadvertently caused lpfc_sli_sum_iocb() to exclude counting
of outstanding aborted I/Os and ABORT IOCBs.  Thus,
lpfc_reset_flush_io_context() called from any TMF routine does not properly
wait to flush all outstanding FCP IOCBs leading to a block layer crash on
an invalid scsi_cmnd->request pointer.

  kernel BUG at ../block/blk-core.c:1489!
  RIP: 0010:blk_requeue_request+0xaf/0xc0
  ...
  Call Trace:
  <IRQ>
  __scsi_queue_insert+0x90/0xe0 [scsi_mod]
  blk_done_softirq+0x7e/0x90
  __do_softirq+0xd2/0x280
  irq_exit+0xd5/0xe0
  do_IRQ+0x4c/0xd0
  common_interrupt+0x87/0x87
  </IRQ>

Fix by separating out the LPFC_IO_FCP, LPFC_IO_ON_TXCMPLQ,
LPFC_DRIVER_ABORTED, and CMD_ABORT_XRI_CN || CMD_CLOSE_XRI_CN checks into a
new lpfc_sli_validate_fcp_iocb_for_abort() routine when determining to
build an ABORT iocb.

Restore lpfc_reset_flush_io_context() functionality by including counting
of outstanding aborted IOCBs and ABORT IOCBs in lpfc_sli_sum_iocb().

Link: https://lore.kernel.org/r/20210910233159.115896-9-jsmart2021@gmail.com
Fixes: e136471135 ("scsi: lpfc: Fix illegal memory access on Abort IOCBs")
Cc: <stable@vger.kernel.org> # v5.12+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
b507357f79 scsi: lpfc: Fix NVMe I/O failover to non-optimized path
Currently, we hold off unregistering with NVMe transport layer until GID_FT
or ADISC completes upon receipt of RSCN. In the ADISC discovery routine,
for nodes not found in the GID_FT response, the nodes are unregistered from
the SCSI transport but not UNREG_RPI'd. Meaning outstanding WQEs continue
to be outstanding and were not failed back to the OS. If an NVMe device,
this mean there wasn't initial termination of the I/Os so they could be
issued on a different NVMe path.

Fix by unregistering the RPI so that I/O is cancelled.

Link: https://lore.kernel.org/r/20210910233159.115896-8-jsmart2021@gmail.com
Fixes: 0614568361 ("scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
a864ee709b scsi: lpfc: Don't remove ndlp on PRLI errors in P2P mode
In pt-2-pt mode, the initiator does not log into the target after a PRLI
error.  In pt-2-pt mode, the target responded to the PRLI by sending a
LOGO. The LOGO causes all ELS and I/Os to be aborted. This caused the PRLI
to fail. The PRLI completion path caused the discovery node to be dropped
to avoid being stick in an UNUSED (not logged in) state. As the node was
dropped there is no retry of the login and as it is pt-2-pt, there is no
RSCN to retrigger discovery. Thus the other end is not seen by the OS.

Fix by ensuring the discovery node is not dropped if connecting pt-2-pt.
This will cause PLOGI to be retried.

Link: https://lore.kernel.org/r/20210910233159.115896-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
3a874488d2 scsi: lpfc: Fix rediscovery of tape device after LIP
On link up and node discovery, a remote port is registered with the SCSI
transport and the driver sets fc4_xpt_flags to track transport
registration.

A link down event causes the driver to deregister with the SCSI transport,
starting the devloss timer, and calls a local unreg routine to clear the
login state. Part of the login state is the fc4_xpt_flags.  However, with
tape devices that support sequence level error recovery, which wants to
preserve the login, the local unreg routine is skipped, thus the flags
aren't cleared.

A subsequent link up, ADISC is performed and the lpfc_nlp_reg_node()
routine is called. As the fc4_xpt_flags is not clear, it's believed the
node is already registered with the transport. Unfortunately, the
registration was already terminated. Eventually the devloss tmo timer
expires and tears down the device.

Fix by ensuring the tape device, known by the ADISC flag, is always
unregistered if the link drops.

Link: https://lore.kernel.org/r/20210910233159.115896-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
88f7702984 scsi: lpfc: Fix hang on unload due to stuck fport node
A test scenario encountered an unload hang while an FLOGI ELS was in flight
when a link down condition occurred.  The driver fails unload as it never
releases the fport node.

For most nodes, when the link drops, devloss tmo is started and the timeout
will cause the final node release. For the Fport, as it has not yet
registered with the SCSI transport, there is no devloss timer to be
started, so there is no final release.  Additionally, the link down
sequence causes ABORTS to be issued for pending ELS's. The completions from
the ABORTS perform the release of node references.  However, as the adapter
is being reset to be unloaded, those completions will never occur.

Fix by the following:

 - In the ELS cleanup, recognize when unloading and place the ELS's on a
   different list that immediately cleans up/completes the ELS's.  It's
   recognized that this condition primarily affects only the fport, with
   other ports having normal clean up logic that handles things.

 - Resolve the devloss issue by, when cleaning up nodes on after link down,
   recognizing when the fabric node does not have a completed state (its
   state is UNUSED) and removing a reference so the node can delete after
   the ELS reference is released.

Link: https://lore.kernel.org/r/20210910233159.115896-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:21 -04:00
James Smart
20d2279f90 scsi: lpfc: Fix premature rpi release for unsolicited TPLS and LS_RJT
A test scenario has a target issuing a TPLS after accepting the driver's
PRLI.  TPLS is not supported by the driver so it rejects the ELS.  However,
the reject was only happening on the primary N_Port.  If the TPLS was to a
NPIV vport, not only would it reject the ELS, but it would act on the TPLS,
starting devloss, then unregister from the SCSI transport and release the
node. When devloss expired, it would access the node again and cause a page
faul.

Fix by altering the NPIV code to recognize that a correctly registered node
can reject unsolicited ELS I/O and to not unregister with the SCSI
transport and tear the node down.  Add a check of the fc4_xpt_flags so that
only a zero value allows the unreg and teardown.

Link: https://lore.kernel.org/r/20210910233159.115896-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14 23:33:20 -04:00