Move the wait loop into its own function, so it doesn't need to be
replicated in multiple locations. Also move the PLL lock checks between
setting the link bandwidth, which may cause the PLL to unlock, and the
MACRO_RST which needs the PLL to be locked.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-12-l.stach@pengutronix.de
The PLL will be reconfigured later, which may cause it to go out of lock
anyway, so there is no point in waiting for the PLL to lock here. Instead
we can continue execution of the link setup, which will properly set the
PLL parameters and will wait for the PLL to lock at the appropriate times.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-11-l.stach@pengutronix.de
Setting the link bandwidth may change the PLL parameters, which will cause
the PLL to go out of lock, so make sure to apply the MACRO_RST, which
according to the comment is required to be pulsed after the PLL is locked.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-10-l.stach@pengutronix.de
This check is way too late in the DP enable flow. The PLL must be
locked much earlier, before any link training can happen. If the
PLL is unlocked at that point in time there is something seriously
wrong in the enable flow.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Robet Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-9-l.stach@pengutronix.de
Make sure the controller is in a basic working state after runtime
resume. Keep the analog function enable in the mode set path as this
enables parts of the PHY that are only required to be powered when
there is a data stream being sent out.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-8-l.stach@pengutronix.de
Platform and PHY power isn't only required when the actual display data
stream is active, but may be required earlier to support AUX channel
transactions. Move them into the runtime PM calls, so they are properly
managed whenever various other parts of the driver need them to be active.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-7-l.stach@pengutronix.de
The clock is already managed by runtime PM, which is properly invoked
from the analogix_dp_set_bridge function, so there is no need for an
additional reference.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-6-l.stach@pengutronix.de
Now that the clock is handled dynamically through
analogix_dp_resume/suspend and it isn't statically enabled in the
driver probe routine, there is no need for the remove function anymore.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-5-l.stach@pengutronix.de
There is no reason to enable the controller clock in driver probe, as
there is no HW initialization done in this function. Instead rely on
either runtime PM to handle the controller clock or statically enable
it in the driver bind routine, after which real hardware access is
required to work.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-4-l.stach@pengutronix.de
AUX transactions require the controller to be in working state and
take a runtime PM reference. To avoid potential races beween the
first transactions on the bus and runtime PM being set up, move the
AUX registration behind the runtime PM setup.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-3-l.stach@pengutronix.de
Hook up the runtime PM suspend/resume paths to make the rockchip
glue behave more like the exynos one. The same suspend/resume
functions are used for system sleep via the runtime PM force
suspend/resume.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-2-l.stach@pengutronix.de
This isn't used, but gives the impression of the power on and power off
platform calls being non-symmetrical. Remove the unused callback and
rename the power_on_start to simply power_on.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-1-l.stach@pengutronix.de
When CONFIG_DRM_PANIC=y, but CONFIG_DRM=m:
ld: drivers/gpu/drm/drm_panic.o: in function `drm_panic_setup_logo':
drivers/gpu/drm/drm_panic.c:99: multiple definition of `init_module'; drivers/gpu/drm/drm_drv.o:drivers/gpu/drm/drm_drv.c:1079: first defined here
Fix this by restricting the graphical logo handling and its
device_initcall() to the built-in case. Logos are freed during late
kernel initialization, so they are no longer available at module load
time anyway.
Fixes: 294bbd1f26 ("drm/panic: Add support for drawing a monochrome graphical logo")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406261341.GYsbLpN1-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4009fca99a7c05f617cc9899c6d0a5748415595d.1719391132.git.geert+renesas@glider.be
DRM core code cannot call into DRM helper code, as this would lead to
circular references in the modular case. Hence drop the selection of
DRM_KMS_HELPER. It was unused anyway, as v10 switched from using
the DRM format helpers to its own color format conversion, cfr. commit
9544309775 ("drm/panic: Add support for color format conversion").
Remove the unneeded include of <drm/drm_format_helper.h>.
Fixes: bf9fb17c66 ("drm/panic: Add a drm panic handler")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/60155f8c939ed286e324a7c12a1daa69fe49fcf6.1719391132.git.geert+renesas@glider.be
This reverts commit 01338bb82f.
With clock improvements in place, this seems to be no longer
necessary. Set the CLRSIPO to default setting recommended by
manufacturer.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-5-marex@denx.de
The only information in the datasheet regarding this divider is a note
in SYS_PLLPARAM register documentation which states that when LSCLK is
270 MHz, LSCLK_DIV should be 1. What should LSCLK_DIV be set to when
LSCLK is 162 MHz (for DP 1.62G mode) is unclear, but empirical test
confirms using LSCLK_DIV 1 has no adverse effects either. In the worst
case, the internal TC358767 clock would run faster.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-4-marex@denx.de
This line_pixel_subtract is no longer needed now that the bridge can
request and obtain specific pixel clock on input to the bridge, with
clock frequency that matches the Pixel PLL frequency.
The line_pixel_subtract is now always 0, so drop it entirely.
The line_pixel_subtract was not reliable as it never worked when the
Pixel PLL and input clock were off just so that the required amount
of pixels to subtract would not be whole integer.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-3-marex@denx.de
Use tc_pxl_pll_calc() to find out the exact clock frequency generated by the
Pixel PLL. Use the Pixel PLL frequency as adjusted_mode clock frequency and
pass it down the display pipeline to obtain exactly this frequency on input
into this bridge.
The precise input frequency that matches the Pixel PLL frequency is
important for this bridge, as if the frequencies do not match, the
bridge does suffer VFIFO overruns or underruns.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-2-marex@denx.de
Split tc_pxl_pll_en() into tc_pxl_pll_calc() which does only Pixel PLL
parameter calculation and tc_pxl_pll_en() which calls tc_pxl_pll_calc()
and then configures the Pixel PLL register.
This is a preparatory patch for further rework, where tc_pxl_pll_calc()
will also be used to find out the exact clock frequency generated by the
Pixel PLL. This frequency will be used as adjusted_mode clock frequency
and passed down the display pipeline to obtain exactly this frequency
on input into this bridge.
The precise input frequency that matches the Pixel PLL frequency is
important for this bridge, as if the frequencies do not match, the
bridge does suffer VFIFO overruns or underruns.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-1-marex@denx.de
The function drm_simple_encoder_init() is a trivial helper and
deprecated. Replace it with the regular call to drm_encoder_init().
Resolves the dependency on drm_simple_kms_helper.h. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625131815.14514-1-tzimmermann@suse.de
All are MM related apart from a MAINTAINERS update. There is no
identifiable theme here - just singleton patches in various places.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZnyyJAAKCRDdBJ7gKXxA
jkcPAQDEsU/erozYjwo2Qq+B03micPCNGLJ6M4pG5t57snwnngEAkQClTiUCjmgK
Xb0H1KkV8ZJUt1gBUnlODXDSf1bhsAE=
=Uj0R
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 7 are cc:stable.
All are MM related apart from a MAINTAINERS update. There is no
identifiable theme here - just singleton patches in various places"
* tag 'mm-hotfixes-stable-2024-06-26-17-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory: don't require head page for do_set_pmd()
mm/page_alloc: Separate THP PCP into movable and non-movable categories
nfs: drop the incorrect assertion in nfs_swap_rw()
mm/migrate: make migrate_pages_batch() stats consistent
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
selftests/mm:fix test_prctl_fork_exec return failure
mm: convert page type macros to enum
ocfs2: fix DIO failure due to insufficient transaction credits
kasan: fix bad call to unpoison_slab_object
mm: handle profiling for fake memory allocations during compaction
mm/slab: fix 'variable obj_exts set but not used' warning
/proc/pid/smaps: add mseal info for vma
mm: fix incorrect vbq reference in purge_fragmented_block
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.
Fixes: 96518518cc ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Mesa VK_KHR_performance_query use case requires preemption and timeslicing
to be disabled for the stream exec queue. Implement this functionality
here.
v2: Minor change to debug print to print both ret values (Umesh)
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626181817.1516229-3-ashutosh.dixit@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stream enable/disable functions previously had void return because failure
during function execution was not possible. This will change when we
introduce functionality to disable preemption on the stream exec
queue. Therefore, in preparation for this functionality, prepare this code
to be able to handle error returns.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626181817.1516229-2-ashutosh.dixit@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We shouldn't leave VFs enabled when unloading the PF driver.
Otherwise we will get a message like:
[ ] xe 0000:4d:00.0: driver left SR-IOV enabled after remove
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626111827.1389-2-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The cleanup is done by devres in irq_uninstall.
Commit bbc9651fe9 ("drm/xe/irq: move irq_uninstall over to devm")
resolved the ordering issue where irq_uninstall (registered with drmm)
was called after pci_free_irq_vectors (registered with devm upon calling
pci_alloc_irq_vectors). This happened because drmm action list is
registered with devm very early in the init flow - before
pci_alloc_irq_vectors.
Now that irq_uninstall is registered with devm, it will be called before
pci_free_irq_vectors and we can remove xe_irq_shutdown.
Signed-off-by: Ilia Levi <illevi@habana.ai>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606124705.822451-1-illevi@habana.ai
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We attempt to unprovision all VFs GuC when disabling them, but
GuC may reject such request if the target VF was previously active
but VF driver didn't unload with explicit VF reset H2G action or
the VMM has not started the VF FLR.
To avoid mismatches between configs maintained the PF and GuC,
trigger an explicit FLR sequences just before releasing resources.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625194546.1301-2-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We maintain GuC error code values in hex format. Also print them
in that format for easier matching.
While at it, slightly reformat the log and add missing \n.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-4-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There are many more error codes used that the GuC firmware can
return in the RESPONSE_FAILURE message. Add to the ABI header
those which are more likely to be seen by the PF or VF drivers.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-3-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The G2H RETRY message sent by the GuC does not necessary indicate
any serious problem and can be a part of the normal communication
flow. Switch the log level from warning to more appropriate debug.
This will also let the CI ignore these logs which were seen in few
SR-IOV scenarios.
While at it, use hex to print the reason and add missing \n.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-2-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We have already marked the GuC PC feature as not applicable for
VF devices, but we missed the fact that there may be still some
privileged activities performed by this component, who does much
more than its name suggests.
Explicitly skip xe_guc_pc_start() if running as a VF driver and
use a GT oriented message to report any error.
v2: also skip xe_guc_pc_stop (Vinay)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240622094253.1081-1-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix kernel doc in xe_drm.h. Also eliminate private/non-abi enum
definitions.
v2: Remove __DRM_XE_PERF_TYPE_MAX since it is unused (Michal)
v3: Also remove DRM_XE_OA_PROPERTY_MAX since it can also be
eliminated (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240623203119.3840283-1-ashutosh.dixit@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If applicable, we prefer GT oriented dmesg messages. Update all
HuC related messages and use more user friendly error codes.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621172522.1037-1-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We already request max freq in the load path, moving it
to __xe_guc_upload will ensure this speeds up GuC load in
the resume path as well.
v2: Rename xe_guc_pc_init_early since we now call it per
GuC load (Michal W)
v3: Keep pc_init_early() and init RPx values there (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-3-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.
During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.
During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.
v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.
v4: Fix BAT failure
v5: Add a function pointer for ggtt_ops (Michal W)
v6: Fix name collision and use static function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Two patches to fix kworker name formatting.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZnyHUw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGV8AAQCi2flF10nHfE+nPsji8Z2FWtDKIzemsKgmxSnW
VvThlAD+MeK29fbz0uZzFa65TqIeckf7DGoGQpKnMzC7+FeJWAc=
=6POk
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two patches to fix kworker name formatting"
* tag 'wq-for-6.10-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Increase worker desc's length to 32
workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZ8WXYACgkQJNaLcl1U
h9AspQf/bpCUI0n5Ug9gVnIruIjAs7B5M1ctlkwTdKmNs1du3Qsd5/5Ucu1tqhSx
Y/yvB4VZTWOYLbgT2rjQgt9hEiBaCbrs3QFdL+Row0+qSrngydVbng2yKacMg1ii
IlqvhGvYZdODUL8SyoehlQXMN3OXOPzX2RVeAu9BVblXmeHYlNF8c/SfYvXJuto6
iJPYUV22+aOZsg+9kvnAb1KqlaZkPPPmLoKBVcFgoz+A3fVzzazMsDcBXGKLDFBX
OEtTjtGGb/facOqvaUhc/TS7Ug5Dk/cO9G8rErECwdV4vvFB2UCWkmL/bohcXax1
b9QJfMG08ucCWlKmZfbww1Oq8rX+sg==
=kPZz
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
Use the "abspath" call when symlinking the gdb python scripts in
scripts/gdb/linux. This call is needed to avoid broken links when
running the scripts_gdb target on a build directory located directly
under the source tree (e.g., O=builddir).
Fixes: 659bbf7e1b ("kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the fod
member of 'struct nvmet_fc_tgt_queue' triggers this restriction,
resulting in:
drivers/nvme/target/fc.c:151:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct nvmet_fc_fcp_iod' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
151 | struct nvmet_fc_fcp_iod fod[] __counted_by(sqsize);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2027
Fixes: ccd3129aca ("nvmet-fc: Annotate struct nvmet_fc_tgt_queue with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>