Commit graph

1,283,935 commits

Author SHA1 Message Date
Kent Overstreet
319fef29e9 bcachefs: Fix trans->locked assert
in bch2_move_data_btree, we might start with the trans unlocked from a
previous loop iteration - we need a trans_begin() before iter_init().

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-05 10:44:08 -04:00
Kent Overstreet
fdccb24352 bcachefs: Rereplicate now moves data off of durability=0 devices
This fixes an issue where setting a device to durability=0 after it's
been used makes it impossible to remove.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-05 10:44:08 -04:00
Kent Overstreet
9a64e1bfd8 bcachefs: Fix GFP_KERNEL allocation in break_cycle()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-05 10:44:08 -04:00
Namhyung Kim
ca9680821d perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
Ingo reported that he was seeing these when hitting Control+C during a
perf tools build:

  Makefile.perf:1149: *** Missing bpftool input for generating vmlinux.h. Stop.

The failure happens when you don't have vmlinux.h or vmlinux with BTF.

ifeq ($(VMLINUX_H),)
  ifeq ($(VMLINUX_BTF),)
    $(error Missing bpftool input for generating vmlinux.h)
  endif
endif

VMLINUX_BTF can be empty if you didn't build a kernel or it doesn't have
a BTF section and the current kernel also has no BTF.  This is totally
ok.

But VMLINUX_H should be set to the minimal version in the source tree
(unless you overwrite it manually) when you don't pass GEN_VMLINUX_H=1
(which requires VMLINUX_BTF should not be empty).  The problem is that
it's defined in Makefile.config which is not included for `make clean`.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/CAM9d7ch5HTr+k+_GpbMrX0HUo5BZ11byh1xq0Two7B7RQACuNw@mail.gmail.com
Link: http://lore.kernel.org/lkml/ZjssGrj+abyC6mYP@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-06-05 11:33:00 -03:00
Arnaldo Carvalho de Melo
5b3cde1988 Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
This reverts commit 7d1405c71d.

This causes segfaults in some cases, as reported by Milian:

  ```
  sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e
  raw_syscalls:sys_enter ls
  ...
  [ perf record: Woken up 3 times to write data ]
  malloc(): invalid next size (unsorted)
  Aborted
  ```

  Backtrace with GDB + debuginfod:

  ```
  malloc(): invalid next size (unsorted)

  Thread 1 "perf" received signal SIGABRT, Aborted.
  __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6,
  no_tid=no_tid@entry=0) at pthread_kill.c:44
  Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c
  44            return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO
  (ret) : 0;
  (gdb) bt
  #0  __pthread_kill_implementation (threadid=<optimized out>,
  signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
  #1  0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>,
  signo=6) at pthread_kill.c:78
  #2  0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/
  raise.c:26
  #3  0x00007ffff6e384c3 in __GI_abort () at abort.c:79
  #4  0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea
  "%s\n") at ../sysdeps/posix/libc_fatal.c:132
  #5  0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850
  "malloc(): invalid next size (unsorted)") at malloc.c:5772
  #6  0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0
  <main_arena>, bytes=bytes@entry=368) at malloc.c:4081
  #7  0x00007ffff6eb877e in __libc_calloc (n=<optimized out>,
  elem_size=<optimized out>) at malloc.c:3754
  #8  0x000055555569bdb6 in perf_session.do_write_header ()
  #9  0x00005555555a373a in __cmd_record.constprop.0 ()
  #10 0x00005555555a6846 in cmd_record ()
  #11 0x000055555564db7f in run_builtin ()
  #12 0x000055555558ed77 in main ()
  ```

  Valgrind memcheck:
  ```
  ==45136== Invalid write of size 8
  ==45136==    at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf)
  ==45136==    by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==  Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
  ==45136==    at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
  ==45136==    by 0x3574AB: zalloc (in /usr/bin/perf)
  ==45136==    by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==
  ==45136== Syscall param write(buf) points to unaddressable byte(s)
  ==45136==    at 0x575953D: __libc_write (write.c:26)
  ==45136==    by 0x575953D: write (write.c:24)
  ==45136==    by 0x35761F: ion (in /usr/bin/perf)
  ==45136==    by 0x357778: writen (in /usr/bin/perf)
  ==45136==    by 0x1548F7: record__write (in /usr/bin/perf)
  ==45136==    by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==  Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
  ==45136==    at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
  ==45136==    by 0x3574AB: zalloc (in /usr/bin/perf)
  ==45136==    by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==
 -----

Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org # 6.8+
Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-06-05 11:12:36 -03:00
Carlos Llamas
f92a59f6d1 locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc
For ${atomic}_sub_and_test() the @i parameter is the value to subtract,
not add. Fix the typo in the kerneldoc template and generate the headers
with this update.

Fixes: ad8110706f ("locking/atomic: scripts: generate kerneldoc comments")
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240515133844.3502360-1-cmllamas@google.com
2024-06-05 15:52:34 +02:00
Haifeng Xu
74751ef5c1 perf/core: Fix missing wakeup when waiting for context reference
In our production environment, we found many hung tasks which are
blocked for more than 18 hours. Their call traces are like this:

[346278.191038] __schedule+0x2d8/0x890
[346278.191046] schedule+0x4e/0xb0
[346278.191049] perf_event_free_task+0x220/0x270
[346278.191056] ? init_wait_var_entry+0x50/0x50
[346278.191060] copy_process+0x663/0x18d0
[346278.191068] kernel_clone+0x9d/0x3d0
[346278.191072] __do_sys_clone+0x5d/0x80
[346278.191076] __x64_sys_clone+0x25/0x30
[346278.191079] do_syscall_64+0x5c/0xc0
[346278.191083] ? syscall_exit_to_user_mode+0x27/0x50
[346278.191086] ? do_syscall_64+0x69/0xc0
[346278.191088] ? irqentry_exit_to_user_mode+0x9/0x20
[346278.191092] ? irqentry_exit+0x19/0x30
[346278.191095] ? exc_page_fault+0x89/0x160
[346278.191097] ? asm_exc_page_fault+0x8/0x30
[346278.191102] entry_SYSCALL_64_after_hwframe+0x44/0xae

The task was waiting for the refcount become to 1, but from the vmcore,
we found the refcount has already been 1. It seems that the task didn't
get woken up by perf_event_release_kernel() and got stuck forever. The
below scenario may cause the problem.

Thread A					Thread B
...						...
perf_event_free_task				perf_event_release_kernel
						   ...
						   acquire event->child_mutex
						   ...
						   get_ctx
   ...						   release event->child_mutex
   acquire ctx->mutex
   ...
   perf_free_event (acquire/release event->child_mutex)
   ...
   release ctx->mutex
   wait_var_event
						   acquire ctx->mutex
						   acquire event->child_mutex
						   # move existing events to free_list
						   release event->child_mutex
						   release ctx->mutex
						   put_ctx
...						...

In this case, all events of the ctx have been freed, so we couldn't
find the ctx in free_list and Thread A will miss the wakeup. It's thus
necessary to add a wakeup after dropping the reference.

Fixes: 1cf8dfe8a6 ("perf/core: Fix race between close() and fork()")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240513103948.33570-1-haifeng.xu@shopee.com
2024-06-05 15:52:33 +02:00
Breno Leitao
49f683b41f KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the
loads and stores are atomic.  In the extremely unlikely scenario the
compiler tears the stores, it's theoretically possible for KVM to attempt
to get a vCPU using an out-of-bounds index, e.g. if the write is split
into multiple 8-bit stores, and is paired with a 32-bit load on a VM with
257 vCPUs:

  CPU0                              CPU1
  last_boosted_vcpu = 0xff;

                                    (last_boosted_vcpu = 0x100)
                                    last_boosted_vcpu[15:8] = 0x01;
  i = (last_boosted_vcpu = 0x1ff)
                                    last_boosted_vcpu[7:0] = 0x00;

  vcpu = kvm->vcpu_array[0x1ff];

As detected by KCSAN:

  BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm]

  write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16:
  kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm
  handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
  vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
		 arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
  vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
  kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
  kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
  __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
  __x64_sys_ioctl (fs/ioctl.c:890)
  x64_sys_call (arch/x86/entry/syscall_64.c:33)
  do_syscall_64 (arch/x86/entry/common.c:?)
  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

  read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4:
  kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm
  handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
  vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
			arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
  vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
  kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
  kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
  __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
  __x64_sys_ioctl (fs/ioctl.c:890)
  x64_sys_call (arch/x86/entry/syscall_64.c:33)
  do_syscall_64 (arch/x86/entry/common.c:?)
  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

  value changed: 0x00000012 -> 0x00000000

Fixes: 217ece6129 ("KVM: use yield_to instead of sleep in kvm_vcpu_on_spin")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240510092353.2261824-1-leitao@debian.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-06-05 06:16:11 -07:00
Tao Su
980b8bc019 KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
Use the max mappable GPA via GuestPhysBits advertised by KVM to calculate
max_gfn. Currently some selftests (e.g. access_tracking_perf_test,
dirty_log_test...) add RAM regions close to max_gfn, so guest may access
GPA beyond its mappable range and cause infinite loop.

Adjust max_gfn in vm_compute_max_gfn() since x86 selftests already
overrides vm_compute_max_gfn() specifically to deal with goofy edge cases.

Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240513014003.104593-1-tao1.su@linux.intel.com
[sean: tweak name, add comment and sanity check]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-06-05 06:16:10 -07:00
Colin Ian King
d21b3c60d6 KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
Currrentl a 32 bit 1u value is being shifted more than 32 bits causing
overflow and incorrect checking of bits 32-63. Fix this by using the
BIT_ULL macro for shifting bits.

Detected by cppcheck:
sev_init2_tests.c:108:34: error: Shifting 32-bit value by 63 bits is
undefined behaviour [shiftTooManyBits]

Fixes: dfc083a181 ("selftests: kvm: add tests for KVM_SEV_INIT2")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240523154102.2236133-1-colin.i.king@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-06-05 06:16:09 -07:00
David S. Miller
f8f0de9d58 Merge branch 'mlx5-fixes'
Tariq Toukan says:

====================
mlx5 core fixes 20240603

This small patchset provides two bug fixes from the team to the mlx5 core driver.

Series generated against:
commit 33700a0c9b ("net/tcp: Don't consider TCP_CLOSE in TCP_AO_ESTABLISHED")
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 14:07:17 +01:00
Shay Drory
c8b3f38d2d net/mlx5: Always stop health timer during driver removal
Currently, if teardown_hca fails to execute during driver removal, mlx5
does not stop the health timer. Afterwards, mlx5 continue with driver
teardown. This may lead to a UAF bug, which results in page fault
Oops[1], since the health timer invokes after resources were freed.

Hence, stop the health monitor even if teardown_hca fails.

[1]
mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:18:00.0: E-Switch: cleanup
mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource
mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup
BUG: unable to handle page fault for address: ffffa26487064230
PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           OE     -------  ---  6.7.0-68.fc38.x86_64 #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020
RIP: 0010:ioread32be+0x34/0x60
RSP: 0018:ffffa26480003e58 EFLAGS: 00010292
RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0
RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230
RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8
R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0
R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0
FS:  0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <IRQ>
 ? __die+0x23/0x70
 ? page_fault_oops+0x171/0x4e0
 ? exc_page_fault+0x175/0x180
 ? asm_exc_page_fault+0x26/0x30
 ? __pfx_poll_health+0x10/0x10 [mlx5_core]
 ? __pfx_poll_health+0x10/0x10 [mlx5_core]
 ? ioread32be+0x34/0x60
 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core]
 ? __pfx_poll_health+0x10/0x10 [mlx5_core]
 poll_health+0x42/0x230 [mlx5_core]
 ? __next_timer_interrupt+0xbc/0x110
 ? __pfx_poll_health+0x10/0x10 [mlx5_core]
 call_timer_fn+0x21/0x130
 ? __pfx_poll_health+0x10/0x10 [mlx5_core]
 __run_timers+0x222/0x2c0
 run_timer_softirq+0x1d/0x40
 __do_softirq+0xc9/0x2c8
 __irq_exit_rcu+0xa6/0xc0
 sysvec_apic_timer_interrupt+0x72/0x90
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:cpuidle_enter_state+0xcc/0x440
 ? cpuidle_enter_state+0xbd/0x440
 cpuidle_enter+0x2d/0x40
 do_idle+0x20d/0x270
 cpu_startup_entry+0x2a/0x30
 rest_init+0xd0/0xd0
 arch_call_rest_init+0xe/0x30
 start_kernel+0x709/0xa90
 x86_64_start_reservations+0x18/0x30
 x86_64_start_kernel+0x96/0xa0
 secondary_startup_64_no_verify+0x18f/0x19b
---[ end trace 0000000000000000 ]---

Fixes: 9b98d395b8 ("net/mlx5: Start health poll at earlier stage of driver load")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 14:07:16 +01:00
Moshe Shemesh
33afbfcc10 net/mlx5: Stop waiting for PCI if pci channel is offline
In case pci channel becomes offline the driver should not wait for PCI
reads during health dump and recovery flow. The driver has timeout for
each of these loops trying to read PCI, so it would fail anyway.
However, in case of recovery waiting till timeout may cause the pci
error_detected() callback fail to meet pci_dpc_recovered() wait timeout.

Fixes: b3bd076f75 ("net/mlx5: Report devlink health on FW fatal issues")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 14:07:16 +01:00
Frank Wunderlich
c57e558194 net: ethernet: mtk_eth_soc: handle dma buffer size soc specific
The mainline MTK ethernet driver suffers long time from rarly but
annoying tx queue timeouts. We think that this is caused by fixed
dma sizes hardcoded for all SoCs.

We suspect this problem arises from a low level of free TX DMADs,
the TX Ring alomost full.

The transmit timeout is caused by the Tx queue not waking up. The
Tx queue stops when the free counter is less than ring->thres, and
it will wake up once the free counter is greater than ring->thres.
If the CPU is too late to wake up the Tx queues, it may cause a
transmit timeout.
Therefore, we increased the TX and RX DMADs to improve this error
situation.

Use the dma-size implementation from SDK in a per SoC manner. In
difference to SDK we have no RSS feature yet, so all RX/TX sizes
should be raised from 512 to 2048 byte except fqdma on mt7988 to
avoid the tx timeout issue.

Fixes: 656e705243 ("net-next: mediatek: add support for MT7623 ethernet")
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 14:04:44 +01:00
Jani Nikula
f6c823f9b9 drm/xe: drop redundant W=1 warnings from Makefile
Since commit a61ddb4393 ("drm: enable (most) W=1 warnings by default
across the subsystem"), most of the extra warnings in the driver
Makefile are redundant. Remove them.

Note that -Wmissing-declarations and -Wmissing-prototypes are always
enabled by default in scripts/Makefile.extrawarn.

Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/958a67adcbb64d3a387d2a07d83b05d71176e938.1716471145.git.jani.nikula@intel.com
2024-06-05 15:33:59 +03:00
Arnd Bergmann
5c40e428ae arm64/io: add constant-argument check
In some configurations __const_iowrite32_copy() does not get inlined
and gcc runs into the BUILD_BUG():

In file included from <command-line>:
In function '__const_memcpy_toio_aligned32',
    inlined from '__const_iowrite32_copy' at arch/arm64/include/asm/io.h:203:3,
    inlined from '__const_iowrite32_copy' at arch/arm64/include/asm/io.h:199:20:
include/linux/compiler_types.h:487:45: error: call to '__compiletime_assert_538' declared with attribute error: BUILD_BUG failed
  487 |         _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
      |                                             ^
include/linux/compiler_types.h:468:25: note: in definition of macro '__compiletime_assert'
  468 |                         prefix ## suffix();                             \
      |                         ^~~~~~
include/linux/compiler_types.h:487:9: note: in expansion of macro '_compiletime_assert'
  487 |         _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
      |         ^~~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'
   39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
      |                                     ^~~~~~~~~~~~~~~~~~
include/linux/build_bug.h:59:21: note: in expansion of macro 'BUILD_BUG_ON_MSG'
   59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
      |                     ^~~~~~~~~~~~~~~~
arch/arm64/include/asm/io.h:193:17: note: in expansion of macro 'BUILD_BUG'
  193 |                 BUILD_BUG();
      |                 ^~~~~~~~~

Move the check for constant arguments into the inline function to ensure
it is still constant if the compiler decides against inlining it, and
mark them as __always_inline to override the logic that sometimes leads
to the compiler not producing the simplified output.

Note that either the __always_inline annotation or the check for a
constant value are sufficient here, but combining the two looks cleaner
as it also avoids the macro. With clang-8 and older, the macro was still
needed, but all versions of gcc and clang can reliably perform constant
folding here.

Fixes: ead79118da ("arm64/io: Provide a WC friendly __iowriteXX_copy()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240604210006.668912-1-arnd@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2024-06-05 13:30:58 +01:00
Hsin-Te Yuan
97d8613679
ASoC: mediatek: mt8183-da7219-max98357: Fix kcontrol name collision
Since "Headphone Switch" kcontrol name has already been used by da7219,
rename the control name from "Headphone" to "Headphones" to prevent the
colision. Also, this change makes kcontrol name align with the one in
mt8186-mt6366-da7219-max98357.c.

Fixes: 9c7388baa2 ("ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols")
Change-Id: I9ae69a4673cd04786b247cc514fdd20f878ef009
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://msgid.link/r/20240531-da7219-v1-1-ac3343f3ae6a@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-05 13:03:12 +01:00
Alibek Omarov
ccd8d753f0
ASoC: rockchip: i2s-tdm: Fix trcm mode by setting clock on right mclk
When TRCM mode is enabled, I2S RX and TX clocks are synchronized through
selected clock source. Without this fix BCLK and LRCK might get parented
to an uninitialized MCLK and the DAI will receive data at wrong pace.

However, unlike in original i2s-tdm driver, there is no need to manually
synchronize mclk_rx and mclk_tx, as only one gets used anyway.

Tested on a board with RK3568 SoC and Silergy SY24145S codec with enabled and
disabled TRCM mode.

Fixes: 9e2ab4b18e ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates")
Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240604184752.697313-1-a1ba.omarov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-05 13:03:11 +01:00
Jakub Kicinski
5b4b62a169 rtnetlink: make the "split" NLM_DONE handling generic
Jaroslav reports Dell's OMSA Systems Management Data Engine
expects NLM_DONE in a separate recvmsg(), both for rtnl_dump_ifinfo()
and inet_dump_ifaddr(). We already added a similar fix previously in
commit 460b0d33cf ("inet: bring NLM_DONE out to a separate recv() again")

Instead of modifying all the dump handlers, and making them look
different than modern for_each_netdev_dump()-based dump handlers -
put the workaround in rtnetlink code. This will also help us move
the custom rtnl-locking from af_netlink in the future (in net-next).

Note that this change is not touching rtnl_dump_all(). rtnl_dump_all()
is different kettle of fish and a potential problem. We now mix families
in a single recvmsg(), but NLM_DONE is not coalesced.

Tested:

  ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_addr.yaml \
           --dump getaddr --json '{"ifa-family": 2}'

  ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \
           --dump getroute --json '{"rtm-family": 2}'

  ./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_link.yaml \
           --dump getlink

Fixes: 3e41af9076 ("rtnetlink: use xarray iterator to implement rtnl_dump_ifinfo()")
Fixes: cdb2f80f1c ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/all/CAK8fFZ7MKoFSEzMBDAOjoUt+vTZRRQgLDNXEOfdCCXSoXXKE0g@mail.gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 12:34:54 +01:00
David S. Miller
e137596ec1 Merge branch 'tcp-mptcp-close-wait'
Jason Xing says:

====================
tcp/mptcp: count CLOSE-WAIT for CurrEstab

Taking CLOSE-WAIT sockets into CurrEstab counters is in accordance with RFC
1213, as suggested by Eric and Neal.

v5
Link: https://lore.kernel.org/all/20240531091753.75930-1-kerneljasonxing@gmail.com/
1. add more detailed comment (Matthieu)

v4
Link: https://lore.kernel.org/all/20240530131308.59737-1-kerneljasonxing@gmail.com/
1. correct the Fixes: tag in patch [2/2]. (Eric)

Previous discussion
Link: https://lore.kernel.org/all/20240529033104.33882-1-kerneljasonxing@gmail.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 12:32:47 +01:00
Jason Xing
9633e9377e mptcp: count CLOSE-WAIT sockets for MPTCP_MIB_CURRESTAB
Like previous patch does in TCP, we need to adhere to RFC 1213:

  "tcpCurrEstab OBJECT-TYPE
   ...
   The number of TCP connections for which the current state
   is either ESTABLISHED or CLOSE- WAIT."

So let's consider CLOSE-WAIT sockets.

The logic of counting
When we increment the counter?
a) Only if we change the state to ESTABLISHED.

When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.

Fixes: d9cd27b8cd ("mptcp: add CurrEstab MIB counter support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 12:32:47 +01:00
Jason Xing
a46d0ea5c9 tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB
According to RFC 1213, we should also take CLOSE-WAIT sockets into
consideration:

  "tcpCurrEstab OBJECT-TYPE
   ...
   The number of TCP connections for which the current state
   is either ESTABLISHED or CLOSE- WAIT."

After this, CurrEstab counter will display the total number of
ESTABLISHED and CLOSE-WAIT sockets.

The logic of counting
When we increment the counter?
a) if we change the state to ESTABLISHED.
b) if we change the state from SYN-RECEIVED to CLOSE-WAIT.

When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.

Please note: there are two chances that old state of socket can be changed
to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED.
So we have to take care of the former case.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 12:32:46 +01:00
Jani Nikula
dd3cac0ac7 drm/i915: drop redundant W=1 warnings from Makefile
Since commit a61ddb4393 ("drm: enable (most) W=1 warnings by default
across the subsystem"), most of the extra warnings in the driver
Makefile are redundant. Remove them.

Note that -Wmissing-declarations and -Wmissing-prototypes are always
enabled by default in scripts/Makefile.extrawarn.

Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/490931748fa9a1dbac2bceda0c4b778240b10b58.1716471145.git.jani.nikula@intel.com
2024-06-05 14:07:31 +03:00
Tao Su
db574f2f96 KVM: x86/mmu: Don't save mmu_invalidate_seq after checking private attr
Drop the second snapshot of mmu_invalidate_seq in kvm_faultin_pfn().
Before checking the mismatch of private vs. shared, mmu_invalidate_seq is
saved to fault->mmu_seq, which can be used to detect an invalidation
related to the gfn occurred, i.e. KVM will not install a mapping in page
table if fault->mmu_seq != mmu_invalidate_seq.

Currently there is a second snapshot of mmu_invalidate_seq, which may not
be same as the first snapshot in kvm_faultin_pfn(), i.e. the gfn attribute
may be changed between the two snapshots, but the gfn may be mapped in
page table without hindrance. Therefore, drop the second snapshot as it
has no obvious benefits.

Fixes: f6adeae81f ("KVM: x86/mmu: Handle no-slot faults at the beginning of kvm_faultin_pfn()")
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20240528102234.2162763-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-06-05 06:45:06 -04:00
Paolo Bonzini
45ce0314bf KVM/arm64 fixes for 6.10, take #1
- Large set of FP/SVE fixes for pKVM, addressing the fallout
   from the per-CPU data rework and making sure that the host
   is not involved in the FP/SVE switching any more
 
 - Allow FEAT_BTI to be enabled with NV now that FEAT_PAUTH
   is copletely supported
 
 - Fix for the respective priorities of Failed PAC, Illegal
   Execution state and Instruction Abort exceptions
 
 - Fix the handling of AArch32 instruction traps failing their
   condition code, which was broken by the introduction of
   ESR_EL2.ISS2
 
 - Allow vpcus running in AArch32 state to be restored in
   System mode
 
 - Fix AArch32 GPR restore that would lose the 64 bit state
   under some conditions
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmZgELMPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDPf4QAL1kScAthlQSzqqZxM7kWyMZJqMib5OUnF+K
 z8HuNUBnIgpB3cgZlZxPY/dUtztTWe8gx1ie8dMxd1hkukzRdPUo6ToravTCWVB2
 j4dPyuqnbhOX/lm2kfIsWMUNPmrmLFUqpba+ChECBMC/IG+IvGqdt/oQ0v15PXLB
 MgAdX2jVRjhG+5HpfvatAOB5b3u4D20SFNyyUgNWP7pmCVLrUa/esy3jV75vmgDA
 GIvilP+PCiu83iYW8bNlaYN28rKFh1I27rHBPvspPWFwiVaLUKkTgBNBg3y93eA+
 eFGX9PyNPghmOAMukhB6iInZFOi94Bp2gHlRF02ZA8jN+Lsqd4WRNCp6WadL7GFa
 x8GpgjlP68ngGFNCUq5X6yF2WLRIbx1cs3Mu1kudVz7wDh88MdeVIoj710+d1cbY
 5p6jb8Q0+axcEag4UCqO1f+GSgMw9rjHpEOOEOSBYvezjHB9a8WQQW+QNRnLclr2
 Q3QpKo8HpoElQo/EQfIaEhWx+HjvJEewgJ4jMdlLg8lwSpBgwrcCNI5BYmV5AgZr
 iCJnVYZAR/bcv5H98547VcQmkbDY2Wwqj2w5yIBfgjBltWBt59+RIMZKlgIVfGA5
 62rSviZZgMIpTVTRIGRlmpjmI7AAcCf7Z+UpIAOI7onRPg4ewEEu0KO1q67ECqNg
 zO2LJo1a
 =Yc2U
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.10, take #1

- Large set of FP/SVE fixes for pKVM, addressing the fallout
  from the per-CPU data rework and making sure that the host
  is not involved in the FP/SVE switching any more

- Allow FEAT_BTI to be enabled with NV now that FEAT_PAUTH
  is copletely supported

- Fix for the respective priorities of Failed PAC, Illegal
  Execution state and Instruction Abort exceptions

- Fix the handling of AArch32 instruction traps failing their
  condition code, which was broken by the introduction of
  ESR_EL2.ISS2

- Allow vpcus running in AArch32 state to be restored in
  System mode

- Fix AArch32 GPR restore that would lose the 64 bit state
  under some conditions
2024-06-05 06:32:18 -04:00
Wei Li
14951beaec arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process
The function run_all_insn_set_hw_mode() is registered as startup callback
of 'CPUHP_AP_ARM64_ISNDEP_STARTING', it invokes set_hw_mode() methods of
all emulated instructions.

As the STARTING callbacks are not expected to fail, if one of the
set_hw_mode() fails, e.g. due to el0 mixed-endian is not supported for
'setend', it will report a warning:

```
CPU[2] cannot support the emulation of setend
CPU 2 UP state arm64/isndep:starting (136) failed (-22)
CPU2: Booted secondary processor 0x0000000002 [0x414fd0c1]
```

To fix it, add a check for INSN_UNAVAILABLE status and skip the process.

Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20240423093501.3460764-1-liwei391@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-06-05 11:16:55 +01:00
Hangbin Liu
712115a24b selftests: hsr: add missing config for CONFIG_BRIDGE
hsr_redbox.sh test need to create bridge for testing. Add the missing
config CONFIG_BRIDGE in config file.

Fixes: eafbf0574e ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:52:04 +01:00
Daniel Borkmann
1cd4bc987a vxlan: Fix regression when dropping packets due to invalid src addresses
Commit f58f45c1e5 ("vxlan: drop packets from invalid src-address")
has recently been added to vxlan mainly in the context of source
address snooping/learning so that when it is enabled, an entry in the
FDB is not being created for an invalid address for the corresponding
tunnel endpoint.

Before commit f58f45c1e5 vxlan was similarly behaving as geneve in
that it passed through whichever macs were set in the L2 header. It
turns out that this change in behavior breaks setups, for example,
Cilium with netkit in L3 mode for Pods as well as tunnel mode has been
passing before the change in f58f45c1e5 for both vxlan and geneve.
After mentioned change it is only passing for geneve as in case of
vxlan packets are dropped due to vxlan_set_mac() returning false as
source and destination macs are zero which for E/W traffic via tunnel
is totally fine.

Fix it by only opting into the is_valid_ether_addr() check in
vxlan_set_mac() when in fact source address snooping/learning is
actually enabled in vxlan. This is done by moving the check into
vxlan_snoop(). With this change, the Cilium connectivity test suite
passes again for both tunnel flavors.

Fixes: f58f45c1e5 ("vxlan: drop packets from invalid src-address")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Bauer <mail@david-bauer.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:51:10 +01:00
Hangyu Hua
affc18fdc6 net: sched: sch_multiq: fix possible OOB write in multiq_tune()
q->bands will be assigned to qopt->bands to execute subsequent code logic
after kmalloc. So the old q->bands should not be used in kmalloc.
Otherwise, an out-of-bounds write will occur.

Fixes: c2999f7fb0 ("net: sched: multiq: don't call qdisc_put() while holding tree lock")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:50:19 +01:00
Taehee Yoo
491aee894a ionic: fix kernel panic in XDP_TX action
In the XDP_TX path, ionic driver sends a packet to the TX path with rx
page and corresponding dma address.
After tx is done, ionic_tx_clean() frees that page.
But RX ring buffer isn't reset to NULL.
So, it uses a freed page, which causes kernel panic.

BUG: unable to handle page fault for address: ffff8881576c110c
PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060
Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8
RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283
RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002
RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e
RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8
R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100
FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x254/0x790
? __pfx_page_fault_oops+0x10/0x10
? __pfx_is_prefetch.constprop.0+0x10/0x10
? search_bpf_extables+0x165/0x260
? fixup_exception+0x4a/0x970
? exc_page_fault+0xcb/0xe0
? asm_exc_page_fault+0x22/0x30
? 0xffffffffc0051f64
? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
? do_raw_spin_unlock+0x54/0x220
ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
__napi_poll.constprop.0+0xa0/0x440
net_rx_action+0x7e7/0xc30
? __pfx_net_rx_action+0x10/0x10

Fixes: 8eeed8373e ("ionic: Add XDP_TX support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:49:27 +01:00
Ville Syrjälä
17419f5c6d drm/i915: Protect CRC reg macro arguments for consistency
It's probably a good idea to start protecting all macro arguments
to avoid any cargo-cult mistakes when people go looking for examples
of how to define these things.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:49:02 +03:00
Ville Syrjälä
fddb9fa961 drm/i915: Define the PIPE_CRC_EXP registers
I need a scratch register which fill the following requirements:
- can be accessed via DSB
- all the bits can be read/written
- no serious side effects

So far the only thing I could think of is the "expected CRC"
register. Add the definition so I can use it.

While I only need the hsw+ variant currently, let's define the
older variants as well for completeness.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-7-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:48:01 +03:00
Ville Syrjälä
31951bbe3e drm/i915: Document which platforms have which CRC registers
Sprinkle some comments around to indicate which CRC registers
are valid for which platforms.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:47:50 +03:00
Ville Syrjälä
7bd7cfa833 drm/i915: Add a separate definition for PIPE_CRC_RES_HSW
On hsw+ we only have one CRC result register, instead of the
five we have on ivb, and some of the others have been repurposed
to serve other CRC related purposes.

Since the hsw+ vs. pre-hsw register operate quite differently
let's add a separate definition for the hsw+ variant to make the
situation a bit more clear. Also since we only use this from a
hsw+ codepath there is no real benefit to be had with reusing
the ivb register definition.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:46:59 +03:00
Ville Syrjälä
1ec6defe71 drm/i915: Regroup pipe CRC regs
Put all the definitions related to a single pipe CRC register
in one place, instead of the current approach where things are
spread all over the place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:46:43 +03:00
Ville Syrjälä
1c1bfd8b0b drm/i915: Switch PIPE_CRC_RES_*_IVB to _MMIO_PIPE()
PIPE_CRC_RES_*_IVB are proper pipe registers, and only valid
for IVB+ where pipe register blocks are equally spaced, so we
can switch from _MMIO_TRANS2() to the simpler _MMIO_PIPE() for
these.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:46:34 +03:00
Ville Syrjälä
ccb6ba9eba drm/i915: Extract intel_pipe_crc_regs.h
The CRC registers are a pretty self contained bunch.
Extract them to a separate header to declutter i915_reg.h.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531115342.2763-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-06-05 12:46:26 +03:00
Ville Syrjälä
8b329d74fb drm/i915/dsb: Use intel_color_uses_dsb()
Use intel_color_uses_dsb() instead of open coding it in
intel_vblank_evade_init(). Make the logic around DSB a bit
more isolated from the rest of the code.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-5-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-05 12:45:56 +03:00
Ville Syrjälä
81d604f44b drm/i915/dsb: Pass DSB engine ID to intel_dsb_prepare()
Allow the caller of intel_dsb_prepare() to determine which DSB
engine (out of the three possible per pipe) to use. This will
let us utilize multiple DSB engines during the same commit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-05 12:45:34 +03:00
Ville Syrjälä
738f3d8618 drm/i915/dsb: Move DSB ID definition to the header
We're going to need to make the DSB ID visible outside the DSB
code, so that we eg. can use multiple DSB engines in parallel.
to that end move the definition to intel_dsb.h.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-05 12:45:23 +03:00
Ville Syrjälä
7f57f21510 drm/i915/dsb: Polish the DSB ID enum
Namespace the DSB ID enum properly, and make the naming match
other such enums in general. Also make the names 0 based as
that's what Bspec uses for DSB (unlike eg. planes where it
uses 1 based indexing).

We'll throw out INVALID_DSB while at it since we have no use for
it at the moment.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-05 12:45:13 +03:00
Barry Song
310ec03841 dma-buf: align fd_flags and heap_flags with dma_heap_allocation_data
dma_heap_allocation_data defines the UAPI as follows:

 struct dma_heap_allocation_data {
 	__u64 len;
 	__u32 fd;
 	__u32 fd_flags;
 	__u64 heap_flags;
 };

However, dma_heap_buffer_alloc() casts both fd_flags and heap_flags
into unsigned int. We're inconsistent with types in the non UAPI
arguments. This patch fixes it.

Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605012605.5341-1-21cnbao@gmail.com
2024-06-05 14:52:15 +05:30
Tristram Ha
0a8d3f2e3e net: phy: Micrel KSZ8061: fix errata solution not taking effect problem
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata.  This worked in 5.0 kernel but not in newer kernels.  The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning.  This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.

Fixes: 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 10:03:15 +01:00
Tvrtko Ursulin
9c3951ec27
drm/v3d: Fix perfmon build error/warning
Move static const array into the source file to fix the "defined but not
used" errors.

The fix is perhaps not the prettiest due hand crafting the array sizes
in v3d_performance_counters.h, but I did add some build time asserts to
validate the counts look sensible, so hopefully it is good enough for a
quick fix.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 3cbcbe016c ("drm/v3d: Add Performance Counters descriptions for V3D 4.2 and 7.1")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405211137.hueFkLKG-lkp@intel.com/Cc: Maíra Canal <mcanal@igalia.com>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604160210.24073-1-tursulin@igalia.com
2024-06-05 10:44:51 +02:00
Wen Gu
fb0aa0781a net/smc: avoid overwriting when adjusting sock bufsizes
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf
to sysctl_tcp_wmem[1], since this may overwrite the value set by
tcp_sndbuf_expand() in TCP connection establishment.

And the other setting sk_{snd|rcv}buf to sysctl value in
smc_adjust_sock_bufsizes() can also be omitted since the initialization
of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem
or ipv4_sysctl_tcp_{w|r}mem[1].

Fixes: 30c3c4a449 ("net/smc: Use correct buffer sizes when switching between TCP and SMC")
Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too.
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 09:42:57 +01:00
Subbaraya Sundeep
8b0f741094 octeontx2-af: Always allocate PF entries from low prioriy zone
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.

Fixes: 7df5b4b260 ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-05 09:40:02 +01:00
Ard Biesheuvel
99280413a5 efi: Add missing __nocfi annotations to runtime wrappers
The EFI runtime wrappers are a sandbox for calling into EFI runtime
services, which are invoked using indirect calls. When running with kCFI
enabled, the compiler will require the target of any indirect call to be
type annotated.

Given that the EFI runtime services prototypes and calling convention
are governed by the EFI spec, not the Linux kernel, adding such type
annotations for firmware routines is infeasible, and so the compiler
must be informed that prototype validation should be omitted.

Add the __nocfi annotation at the appropriate places in the EFI runtime
wrapper code to achieve this.

Note that this currently only affects 32-bit ARM, given that other
architectures that support both kCFI and EFI use an asm wrapper to call
EFI runtime services, and this hides the indirect call from the
compiler.

Fixes: 1a4fec49ef ("ARM: 9392/2: Support CLANG CFI")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-06-05 10:18:58 +02:00
Nirmoy Das
8b01f970ee drm/xe: Use missing lock in relay_needs_worker
Add missing lock that is protecting relay->incoming_actions.

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603081723.18775-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
2024-06-05 09:52:13 +02:00
Magnus Karlsson
03e38d315f Revert "xsk: Document ability to redirect to any socket bound to the same umem"
This reverts commit 968595a936.

Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-3-magnus.karlsson@gmail.com
2024-06-05 09:43:05 +02:00
Magnus Karlsson
7fcf26b315 Revert "xsk: Support redirect to any socket bound to the same umem"
This reverts commit 2863d665ea.

This patch introduced a potential kernel crash when multiple napi instances
redirect to the same AF_XDP socket. By removing the queue_index check, it is
possible for multiple napi instances to access the Rx ring at the same time,
which will result in a corrupted ring state which can lead to a crash when
flushing the rings in __xsk_flush(). This can happen when the linked list of
sockets to flush gets corrupted by concurrent accesses. A quick and small fix
is not possible, so let us revert this for now.

Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-2-magnus.karlsson@gmail.com
2024-06-05 09:42:30 +02:00