Commit graph

1,283,935 commits

Author SHA1 Message Date
Nikunj A Dadhania
27bd5fdc24 KVM: SEV-ES: Prevent MSR access post VMSA encryption
KVM currently allows userspace to read/write MSRs even after the VMSA is
encrypted. This can cause unintentional issues if MSR access has side-
effects. For ex, while migrating a guest, userspace could attempt to
migrate MSR_IA32_DEBUGCTLMSR and end up unintentionally disabling LBRV on
the target. Fix this by preventing access to those MSRs which are context
switched via the VMSA, once the VMSA is encrypted.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Message-ID: <20240531044644.768-2-ravi.bangoria@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-06-03 13:06:48 -04:00
Linus Torvalds
f06ce44145 LoongArch fixes for v6.10-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmZd0NgWHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImekEIEACdE6NqRAUc/eR6doVc9oLir8lX
 dAA5gxwGL6nRZ0tUKBcgHmcUp9oZhEs+Q8EOw9OZ2Hn74d3PrZTPO8tNGiq18t6m
 1c01zasRvt1ODCR35a/dlCBNdIX4h+Q3LUilzG8LuH8d72wsKIz5A/cruVh55pV1
 EGWEZ+MeMo451/6uitREJj7jqh2Av6IfspCj+VDSD7rdafmD79w9EOxAPwTIK08m
 oGWUqw+0WmQdqCR+3pjMVyyA4kVMofCT4TR1KhtWe3jspsNdHh0WHxEG7AIVGXUQ
 YvryvucZop6vBEJkM09CH2ORwAwCXnuESdOIp54bqpY1IfNRdMwhJChb1o1bk3GQ
 dCOMU52sT0AJ/7leyfTR5ANc3m/A4JbtkUypQc8vF8LeHK01mcWe8yJRPu6X+yRD
 endaFhwRM+fjKsaEaJthK7sL5YhIs3+c8rxoOqL2rS2oR19KkPn2k8Na15JhgTwA
 5/QxQJqxjA9X4EyMYSDM+ZIx3pL/xpqeHzzIup79Tfusqzl6DuURiylKZiOmNvCq
 NINZOUsBDZmUSGEdMDrDLCQa4M+vWBKCBIzsGtt6R4Dqx6jDKl2UzKjqVIxTVO52
 uSvJMNb2bF5UFYG9Q/CX9a4PcpAj5/qcvYdzOOT+Fbz+yZ9lK0fG2XqEaVRuK/k+
 JYejrgfvanwK6RnAjQ==
 =MtB4
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-fixes-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some bootloader interface fixes, a dts fix, and a trivial cleanup"

* tag 'loongarch-fixes-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix GMAC's phy-mode definitions in dts
  LoongArch: Override higher address bits in JUMP_VIRT_ADDR
  LoongArch: Fix entry point in kernel image header
  LoongArch: Add all CPUs enabled by fdt to NUMA node 0
  LoongArch: Fix built-in DTB detection
  LoongArch: Remove CONFIG_ACPI_TABLE_UPGRADE in platform_init()
2024-06-03 09:27:45 -07:00
Hagar Hemdan
b97e8a2f71 irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
its_vlpi_prop_update() calls lpi_write_config() which obtains the
mapping information for a VLPI without lock held. So it could race
with its_vlpi_unmap().

Since all calls from its_irq_set_vcpu_affinity() require the same
lock to be held, hoist the locking there instead of sprinkling the
locking all over the place.

This bug was discovered using Coverity Static Analysis Security Testing
(SAST) by Synopsys, Inc.

[ tglx: Use guard() instead of goto ]

Fixes: 015ec0386a ("irqchip/gic-v3-its: Add VLPI configuration handling")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240531162144.28650-1-hagarhem@amazon.com
2024-06-03 18:20:00 +02:00
Cong Wang
2884dc7d08 bpf: Fix a potential use-after-free in bpf_link_free()
After commit 1a80dbcb2d, bpf_link can be freed by
link->ops->dealloc_deferred, but the code still tests and uses
link->ops->dealloc afterward, which leads to a use-after-free as
reported by syzbot. Actually, one of them should be sufficient, so
just call one of them instead of both. Also add a WARN_ON() in case
of any problematic implementation.

Fixes: 1a80dbcb2d ("bpf: support deferring bpf_link dealloc to after RCU grace period")
Reported-by: syzbot+1989ee16d94720836244@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240602182703.207276-1-xiyou.wangcong@gmail.com
2024-06-03 18:16:19 +02:00
Srinivas Pandruvada
1e24c31351 cpufreq: intel_pstate: Fix unchecked HWP MSR access
Fix unchecked MSR access error for processors with no HWP support. On
such processors, maximum frequency can be changed by the system firmware
using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results
in accessing HWP MSR 0x771.

Call Trace:
	<TASK>
	generic_exec_single+0x58/0x120
	smp_call_function_single+0xbf/0x110
	rdmsrl_on_cpu+0x46/0x60
	intel_pstate_get_hwp_cap+0x1b/0x70
	intel_pstate_update_limits+0x2a/0x60
	acpi_processor_notify+0xb7/0x140
	acpi_ev_notify_dispatch+0x3b/0x60

HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled.
Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is
true.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/
Fixes: e8217b4bec ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently")
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-06-03 18:00:23 +02:00
David Kaplan
93c1800b37 x86/kexec: Fix bug with call depth tracking
The call to cc_platform_has() triggers a fault and system crash if call depth
tracking is active because the GS segment has been reset by load_segments() and
GS_BASE is now 0 but call depth tracking uses per-CPU variables to operate.

Call cc_platform_has() earlier in the function when GS is still valid.

  [ bp: Massage. ]

Fixes: 5d8213864a ("x86/retbleed: Add SKL return thunk")
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240603083036.637-1-bp@kernel.org
2024-06-03 17:19:03 +02:00
Thorsten Blum
2317dc2c22 bpf, devmap: Remove unnecessary if check in for loop
The iterator variable dst cannot be NULL and the if check can be removed.
Remove it and fix the following Coccinelle/coccicheck warning reported
by itnull.cocci:

	ERROR: iterator variable bound on line 762 cannot be NULL

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240529101900.103913-2-thorsten.blum@toblux.com
2024-06-03 17:09:23 +02:00
Jack Yu
968c974c08
ASoC: rt722-sdca-sdw: add silence detection register as volatile
Including silence detection register as volatile.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/c66a6bd6d220426793096b42baf85437@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-03 15:59:21 +01:00
Jeff Johnson
7478e15bcc
ASoC: fsl: add missing MODULE_DESCRIPTION() macro
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-dma.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240602-md-snd-fsl-imx-pcm-dma-v1-1-e7efc33c6bf3@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-03 15:59:20 +01:00
Jeff Johnson
a73a83021a
ASoC: mxs: add missing MODULE_DESCRIPTION() macro
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/mxs/snd-soc-mxs-pcm.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240602-md-snd-soc-mxs-pcm-v1-1-1e663d11328d@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-03 15:59:19 +01:00
Dmitry Baryshkov
d3cb3516f2
MAINTAINERS: copy linux-arm-msm for sound/qcom changes
Not having linux-arm-msm@ in cc for audio-related changes for Qualcomm
platforms means that interested parties can easily miss the patches. Add
corresponding L: entry so that linux-arm-msm ML gets CC'ed for audio
patches too.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://msgid.link/r/20240531-asoc-qcom-cc-lamsm-v1-1-f026ad618496@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-03 15:59:19 +01:00
Bard Liao
3b06e13708
ASoC: SOF: Intel: hda-dai: remove skip_tlv label
We just return 0 after the skip_tlv label. No need to use a label.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240603073224.14726-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-03 15:59:14 +01:00
Bard Liao
e0e8e4bce6
ASoC: SOF: Intel: hda-dai: skip tlv for dspless mode
sof_ipc4_dma_config_tlv{} is for Audio DSP firmware only.
Don't set it in dspless mode.

Fixes: 17386cb1b4 ("ASoC: SOF: Intel: hda-dai: set dma_stream_channel_map device")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240603073224.14726-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-06-03 15:59:13 +01:00
Palmer Dabbelt
e2c79b4c5c
Revert "riscv: mm: accelerate pagefault when badaccess"
I accidentally picked up an earlier version of this patch, which had
already landed via mm.  The patch  I picked up contains a bug, which I
kept as I thought it was a fix.  So let's just revert it.

This reverts commit 4c6c002042.

Fixes: 4c6c002042 ("riscv: mm: accelerate pagefault when badaccess")
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240530164451.21336-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-06-03 07:41:13 -07:00
Nam Cao
994af1825a
riscv: fix overlap of allocated page and PTR_ERR
On riscv32, it is possible for the last page in virtual address space
(0xfffff000) to be allocated. This page overlaps with PTR_ERR, so that
shouldn't happen.

There is already some code to ensure memblock won't allocate the last page.
However, buddy allocator is left unchecked.

Fix this by reserving physical memory that would be mapped at virtual
addresses greater than 0xfffff000.

Reported-by: Björn Töpel <bjorn@kernel.org>
Closes: https://lore.kernel.org/linux-riscv/878r1ibpdn.fsf@all.your.base.are.belong.to.us
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240425115201.3044202-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-06-03 07:41:09 -07:00
Abel Vesa
163c1a356a phy: qcom: qmp-combo: Switch from V6 to V6 N4 register offsets
Currently, none of the X1E80100 supported boards upstream have enabled
DP. As for USB, the reason it is not broken when it's obvious that the
offsets are wrong is because the only difference with respect to USB is
the difference in register name. The V6 uses QPHY_V6_PCS_CDR_RESET_TIME
while V6 N4 uses QPHY_V6_N4_PCS_RX_CONFIG. Now, in order for the DP to
work, the DP serdes tables need to be added as they have different
values for V6 N4 when compared to V6 ones, even though they use the same
V6 offsets. While at it, switch swing and pre-emphasis tables to V6 as
well.

Fixes: d7b3579f84 ("phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-3-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-06-03 19:30:47 +05:30
Abel Vesa
99bf896263 phy: qcom-qmp: pcs: Add missing v6 N4 register offsets
The new X1E80100 SoC bumps up the HW version of QMP phy to v6 N4 for
combo USB and DP PHY.  Currently, the X1E80100 uses the pure V6 PCS
register offsets, which are different. Add the offsets so the
mentioned platform can be fixed later on. Add the new PCS offsets
in a dedicated header file.

Fixes: d7b3579f84 ("phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-2-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-06-03 19:30:47 +05:30
Abel Vesa
5314e84c33 phy: qcom-qmp: qserdes-txrx: Add missing registers offsets
Currently, the x1e80100 uses pure V6 register offsets for DP part of the
combo PHY. This hasn't been an issue because external DP is not yet
enabled on any of the boards yet. But in order to enabled it, all these
new V6 N4 register offsets are needed. So add them.

Fixes: 762c3565f3 ("phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets")
Co-developed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240527-x1e80100-phy-qualcomm-combo-fix-dp-v1-1-be8a0b882117@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-06-03 19:30:47 +05:30
Tetsuo Handa
c6144a2116 tomoyo: update project links
TOMOYO project has moved to SourceForge.net .

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
2024-06-03 22:43:11 +09:00
Gao Xiang
3d117494e2 cachefiles: remove unneeded include of <linux/fdtable.h>
close_fd() has been killed, let's get rid of unneeded
<linux/fdtable.h> as Al Viro pointed out [1].

[1] https://lore.kernel.org/r/20240603034055.GI1629371@ZenIV

Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240603062344.818290-1-hsiangkao@linux.alibaba.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-06-03 15:39:17 +02:00
Chuck Lever
4a77c3dead SUNRPC: Fix loop termination condition in gss_free_in_token_pages()
The in_token->pages[] array is not NULL terminated. This results in
the following KASAN splat:

  KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f]

Fixes: bafa6b4d95 ("SUNRPC: Fix gss_free_in_token_pages()")
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-06-03 09:07:55 -04:00
Matthias Schiffer
90dd7de4ef gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
The TQMx86 GPIO controller only supports falling and rising edge
triggers, but not both. Fix this by implementing a software both-edge
mode that toggles the edge type after every interrupt.

Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Co-developed-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/515324f0491c4d44f4ef49f170354aca002d81ef.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-06-03 14:13:13 +02:00
Matthias Schiffer
08af509efd gpio: tqmx86: store IRQ trigger type and unmask status separately
irq_set_type() should not implicitly unmask the IRQ.

All accesses to the interrupt configuration register are moved to a new
helper tqmx86_gpio_irq_config(). We also introduce the new rule that
accessing irq_type must happen while locked, which will become
significant for fixing EDGE_BOTH handling.

Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/6aa4f207f77cb58ef64ffb947e91949b0f753ccd.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-06-03 14:13:13 +02:00
Matthias Schiffer
9d6a811b52 gpio: tqmx86: introduce shadow register for GPIO output value
The TQMx86 GPIO controller uses the same register address for input and
output data. Reading the register will always return current inputs
rather than the previously set outputs (regardless of the current
direction setting). Therefore, using a RMW pattern does not make sense
when setting output values. Instead, the previously set output register
value needs to be stored as a shadow register.

As there is no reliable way to get the current output values from the
hardware, also initialize all channels to 0, to ensure that stored and
actual output values match. This should usually not have any effect in
practise, as the TQMx86 UEFI sets all outputs to 0 during boot.

Also prepare for extension of the driver to more than 8 GPIOs by using
DECLARE_BITMAP.

Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/d0555933becd45fa92a85675d26e4d59343ddc01.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-06-03 14:13:13 +02:00
Gregor Herburger
8c219e52ca gpio: tqmx86: fix typo in Kconfig label
Fix description for GPIO_TQMX86 from QTMX86 to TQMx86.

Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/e0e38c9944ad6d281d9a662a45d289b88edc808e.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-06-03 14:13:13 +02:00
Pierre-Louis Bossart
e2d8ea0a06 soundwire: fix usages of device_get_named_child_node()
The documentation for device_get_named_child_node() mentions this
important point:

"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"

Add fwnode_handle_put() to avoid leaked references.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240429004935.2400191-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-06-03 17:35:24 +05:30
Samuel Holland
e306a894bd irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
Now that the PLIC uses a platform driver, the driver is probed later in the
boot process, where interrupts from peripherals might already be pending.

As a result, plic_handle_irq() may be called as early as the call to
irq_set_chained_handler() completes. But this call happens before the
per-context handler is completely set up, so there is a window where
plic_handle_irq() can see incomplete per-context state and crash.

Avoid this by delaying the call to irq_set_chained_handler() until all
handlers from all PLICs are initialized.

Fixes: 8ec99b0331 ("irqchip/sifive-plic: Convert PLIC driver into a platform driver")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240529215458.937817-1-samuel.holland@sifive.com
Closes: https://lore.kernel.org/r/CAMuHMdVYFFR7K5SbHBLY-JHhb7YpgGMS_hnRWm8H0KD-wBo+4A@mail.gmail.com/
2024-06-03 13:53:12 +02:00
Tristram Ha
6149db4997 net: phy: micrel: fix KSZ9477 PHY issues after suspend/resume
When the PHY is powered up after powered down most of the registers are
reset, so the PHY setup code needs to be done again.  In addition the
interrupt register will need to be setup again so that link status
indication works again.

Fixes: 26dd2974c5 ("net: phy: micrel: Move KSZ9477 errata fixes to PHY driver")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-03 12:06:29 +01:00
Sunil V L
0110c4b110 irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails
When riscv_intc_init_common() fails, the firmware node allocated is not
freed. Add the missing free().

Fixes: 7023b9d83f ("irqchip/riscv-intc: Add ACPI support")
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240527081113.616189-1-sunilvl@ventanamicro.com
2024-06-03 12:29:35 +02:00
Suma Hegde
77f1972bdc platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
HSMP interface is supported only on few x86 processors from AMD.
Accessing HSMP registers on rest of the platforms might cause
unexpected behaviour. So add a check.

Also unavailability of this interface on rest of the processors
is not an error. Hence, use pr_info() instead of the pr_err() to
log the message.

Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20240603081512.142909-1-suma.hegde@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-06-03 11:57:28 +02:00
Armin Wolf
306aec7eea platform/x86: dell-smbios: Simplify error handling
When the allocation of value_name fails, the error handling code
uses two gotos for error handling, which is not necessary.

Simplify the error handling in this case by only using a single goto.

Tested on a Dell Inspiron 3505.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240528204903.445546-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-06-03 11:54:29 +02:00
Armin Wolf
1981b296f8 platform/x86: dell-smbios: Fix wrong token data in sysfs
When reading token data from sysfs on my Inspiron 3505, the token
locations and values are wrong. This happens because match_attribute()
blindly assumes that all entries in da_tokens have an associated
entry in token_attrs.

This however is not true as soon as da_tokens[] contains zeroed
token entries. Those entries are being skipped when initialising
token_attrs, breaking the core assumption of match_attribute().

Fix this by defining an extra struct for each pair of token attributes
and use container_of() to retrieve token information.

Tested on a Dell Inspiron 3050.

Fixes: 33b9ca1e53 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240528204903.445546-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-06-03 11:53:54 +02:00
Arnd Bergmann
078fc56f5c platform/x86: yt2-1380: add CONFIG_EXTCON dependency
This driver uses the extcon subsystem and fails to build
when it cannot call into that subsystem:

x86_64-linux-ld: vmlinux.o: in function `yt2_1380_fc_worker':
lenovo-yoga-tab2-pro-1380-fastcharger.c:(.text+0xa9d819): undefined reference to `extcon_get_state'
x86_64-linux-ld: lenovo-yoga-tab2-pro-1380-fastcharger.c:(.text+0xa9d853): undefined reference to `extcon_get_state'
x86_64-linux-ld: vmlinux.o: in function `yt2_1380_fc_serdev_probe':
lenovo-yoga-tab2-pro-1380-fastcharger.c:(.text+0xa9da22): undefined reference to `extcon_get_extcon_dev'
x86_64-linux-ld: lenovo-yoga-tab2-pro-1380-fastcharger.c:(.text+0xa9dc0c): undefined reference to `devm_extcon_register_notifier_all'

Add a Kconfig dependency to make it it always builds correctly.

Fixes: b2ed33e8d4 ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240528115940.3169455-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-06-03 11:43:15 +02:00
Andy Shevchenko
55624db051 platform/x86: touchscreen_dmi: Use 2-argument strscpy()
Use 2-argument strscpy(), which is not only shorter but also provides
an additional check that destination buffer is an array.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240602090244.1666360-8-andy.shevchenko@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-06-03 11:12:38 +02:00
Hans de Goede
84b26f509c platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
The silead touchscreen driver now defaults to 10 fingers, so it is no
longer necessary to have a "silead,max-fingers=10" property for each
silead touchscreen model. Drop this property from all the configs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240525193854.39130-3-hdegoede@redhat.com
2024-06-03 11:10:46 +02:00
Hans de Goede
38a38f5a36 Input: silead - Always support 10 fingers
When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.

There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.

Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com
2024-06-03 11:10:08 +02:00
Chen Ni
629f2b4e05 drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation
Add check for the return value of of_drm_get_panel_orientation() and
return the error if it fails in order to catch the error.

Fixes: b27c0f6d20 ("drm/panel: sitronix-st7789v: add panel orientation support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240528030832.2529471-1-nichen@iscas.ac.cn
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528030832.2529471-1-nichen@iscas.ac.cn
2024-06-03 10:46:36 +02:00
Ryan Walklin
62ea2eeba7 drm: panel: nv3052c: Add WL-355608-A8 panel
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Limited information is available online however the panel timing values
(below) have been obtained from the vendor BSP. The panel appears to
integrate a NV3052C LCD driver (or clone). Available devices address it
in SPI/RGB mode, with the timing signals generated from the device
SoC (Allwinner H700) and passed through.

Add a panel definition and display mode to the existing NV3502C driver.

It was assumed during bringup that the initialisation sequence was the
same as the existing Fascontek FS035VG158 panel, proved working during
experimentation, however subsequent dumping of the init sequence with a
logic analyser confirms one small change to VCOM_ADJ3 from 0x4a to 0x44,
therefore a separate set of registers is also added.

Timings:
           | Active |  FP  | Sync |  BP  | Total
-----------|--------|------|------|------|-------
Horizontal |   640  |  64  |  20  |  46  |  770
  Vertical |   480  |  21  |   4  |  15  |  520

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Co-developed-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: John Watts <contact@jookia.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240530211415.44201-4-ryan@testtoast.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530211415.44201-4-ryan@testtoast.com
2024-06-03 10:41:14 +02:00
Ryan Walklin
45b888a898 dt-bindings: display: panel: Add WL-355608-A8 panel
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display used in a
number of handheld gaming devices made by Anbernic. By consensus a
vendor prefix is not provided as the panel OEM is unknown.

Add a device tree binding for the panel.

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240530211415.44201-3-ryan@testtoast.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530211415.44201-3-ryan@testtoast.com
2024-06-03 10:41:13 +02:00
Sam Ravnborg
4a534428ef MAINTAINERS: drm: Drop sam as panel reviewer
Drop myself as reviewer of panel patches, to reflect the reality.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240530211402.GA1660596@ravnborg.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530211402.GA1660596@ravnborg.org
2024-06-03 10:40:47 +02:00
Jouni Högander
b330568f0c drm/i915/psr: Add Early Transport into psr debugfs interface
We want to have sink Early Transport capability and usage in our psr
debugfs status interface.

v4: use su_region_et_enabled instead of psr2_su_region_et_valid
v3: remove extra space from "PSR mode:  disabled"
v2: printout "Selective Update enabled (Early Transport)" instead of
    "Selective Update Early Transport enabled"

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-7-jouni.hogander@intel.com
2024-06-03 11:23:18 +03:00
Jouni Högander
04d0aed082 drm/i915/psr: Allow setting I915_PSR_DEBUG_SU_REGION_ET_DISABLE via debugfs
Currently setting I915_PSR_DEBUG_SU_REGION_ET_DISABLE (0x20) via psr_debug
debugfs interface is not allowed. This patch allows it.

v3:
  - ensure psr is disabled/enabled if enable_psr2_su_region_et changes
  - remove extra space
v2: ensure that fastset is performed when the bit changes

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-6-jouni.hogander@intel.com
2024-06-03 11:23:09 +03:00
Jouni Högander
16b65af8b7 drm/i915/display: Selective fetch Y position on Region Early Transport
Selective fetch Y position differs when Region Early Transport is
used. Use formula from Bspec for this.

Bspec: 68927

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-5-jouni.hogander@intel.com
2024-06-03 11:22:58 +03:00
Jouni Högander
0a8c581ce0 drm/i915/psr: Use enable boolean from intel_crtc_state for Early Transport
When enabling Early Transport use
intel_crtc_state->enable_psr2_su_region_et instead of
psr2_su_region_et_valid.

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Fixes: 467e4e061c ("drm/i915/psr: Enable psr2 early transport as possible")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-4-jouni.hogander@intel.com
2024-06-03 11:22:49 +03:00
Jouni Högander
13d1359d67 drm/i915/psr: Get Early Transport status in intel_psr_pipe_get_config
We are currently not getting Early Transport status information in
intel_psr_pipe_get_config. Fix this.

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Fixes: 467e4e061c ("drm/i915/psr: Enable psr2 early transport as possible")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-3-jouni.hogander@intel.com
2024-06-03 11:22:38 +03:00
Jouni Högander
0e3771f459 drm/i915/psr: Add Early Transport status boolean into intel_psr
Currently we are purely relying on psr2_su_region_et_valid. Add new boolean
value into intel_psr struct indicating whether Early Transport is enabled
or not and use it instead of psr2_su_region_et_valid for getting Early
Transport status information.

Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-2-jouni.hogander@intel.com
2024-06-03 11:22:04 +03:00
Sven Eckelmann
537a350d14 batman-adv: Don't accept TT entries for out-of-spec VIDs
The internal handling of VLAN IDs in batman-adv is only specified for
following encodings:

* VLAN is used
  - bit 15 is 1
  - bit 11 - bit 0 is the VLAN ID (0-4095)
  - remaining bits are 0
* No VLAN is used
  - bit 15 is 0
  - remaining bits are 0

batman-adv was only preparing new translation table entries (based on its
soft interface information) using this encoding format. But the receive
path was never checking if entries in the roam or TT TVLVs were also
following this encoding.

It was therefore possible to create more than the expected maximum of 4096
+ 1 entries in the originator VLAN list. Simply by setting the "remaining
bits" to "random" values in corresponding TVLV.

Cc: stable@vger.kernel.org
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2024-06-03 10:20:43 +02:00
Huacai Chen
eb36e520f4 LoongArch: Fix GMAC's phy-mode definitions in dts
The GMAC of Loongson chips cannot insert the correct 1.5-2ns delay. So
we need the PHY to insert internal delays for both transmit and receive
data lines from/to the PHY device. Fix this by changing the "phy-mode"
from "rgmii" to "rgmii-id" in dts.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-06-03 15:45:53 +08:00
Jiaxun Yang
1098efd299 LoongArch: Override higher address bits in JUMP_VIRT_ADDR
In JUMP_VIRT_ADDR we are performing an or calculation on address value
directly from pcaddi.

This will only work if we are currently running from direct 1:1 mapping
addresses or firmware's DMW is configured exactly same as kernel. Still,
we should not rely on such assumption.

Fix by overriding higher bits in address comes from pcaddi, so we can
get rid of or operator.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-06-03 15:45:53 +08:00
Jiaxun Yang
beb2800074 LoongArch: Fix entry point in kernel image header
Currently kernel entry in head.S is in DMW address range, firmware is
instructed to jump to this address after loading the kernel image.

However kernel should not make any assumption on firmware's DMW
setting, thus the entry point should be a physical address falls into
direct translation region.

Fix by converting entry address to physical and amend entry calculation
logic in libstub accordingly.

BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-06-03 15:45:53 +08:00