Currently intel_crtc_scanline_offset() is careful to always
return a positive offset. That is not actually necessary
as long as we take care of negative values when applying the
offset in __intel_get_crtc_scanline().
This simplifies intel_crtc_scanline_offset(), and makes
the scanline_offfset arithmetic more symmetric between
the forward (__intel_get_crtc_scanline()) and reverse
(intel_crtc_scanline_to_hw()) directions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528185647.7765-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
skl_ddb_add_affected_planes() needs the full atomic state. Instead
of digging that out from dubious sources plumb it in explicitly.
The wm counterpart (skl_wm_add_affected_planes()) already does
things in the proper way.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528184945.24083-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Various parts of the cdclk code need access the full atomic
state. Currently it's being dug out via the cdclk_state->base.state
pointer, which is not great as that pointer isn't always valid.
Instead plumb the full atomic state from the top so that it's
clear that it is in fact valid.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528184945.24083-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The margin debugfs node controls the "Enable Margin Test" field of the
lane margining operations. This field selects between either low or high
voltage margin values for voltage margin test or left or right timing
margin values for timing margin test.
According to the USB4 specification, whether or not the "Enable Margin
Test" control applies, depends on the values of the "Independent
High/Low Voltage Margin" or "Independent Left/Right Timing Margin"
capability fields for voltage and timing margin tests respectively. The
pre-existing condition enabled the debugfs node also in the case where
both low/high or left/right margins are returned, which is incorrect.
This change only enables the debugfs node in question, if the specific
required capability values are met.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Fixes: d0f1e0c2a6 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Commit:
7bc263840b ("sched/topology: Consolidate and clean up access to a CPU's max compute capacity")
removed rq->cpu_capacity_orig in favor of using arch_scale_freq_capacity()
calls. Export the underlying percpu symbol on x86 so that external trace
point helper modules can be made to work again.
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240530181548.2039216-1-pauld@redhat.com
Fix the warning from 'make C=1 W=1':
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/rapl.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20240530-md-arch-x86-events-v1-1-e45ffa8af99f@quicinc.com
On an (old) x86 system with SRAT just covering space above 4Gb:
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug
the commit referenced below leads to this NUMA configuration no longer
being refused by a CONFIG_NUMA=y kernel (previously
NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
was seen in the log directly after the message quoted above), because of
memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This
in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES
triggering, followed by a NULL deref in memmap_init() when trying to
access node 64's (NODE_SHIFT=6) node data.
To compensate said change, make memblock_set_node() warn on and adjust
a passed in value of MAX_NUMNODES, just like various other functions
already do.
Fixes: ff6c3d81f2 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1c8a058c-5365-4f27-a9f1-3aeb7fb3e7b2@suse.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
When dma_resv_reserve_fences() is called with num_fences=0 it usually
means that a driver or other component messed up its calculation how
many fences are needed. Warn in that situation.
When no fence are needed the function shouldn't be called in the first
place.
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529084322.2284-1-christian.koenig@amd.com
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored. It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531075110.3250-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for subplatforms. This is similar to what the xe driver is
doing. The subplatform is an enum and it's exclusive, i.e. only one
subplatform can match, and it completely identifies the platform and
subplatform. This is different from i915 core, and is notable in the
handling of ULT/ULX and RPL/RPL-U.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8c04e32648395c0b745bc31a1edd4ef6f574bb70.1716399081.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We'll need to start identifying the platforms independently in display
code in order to break free from the i915 and xe IS_<PLATFORM>()
macros. This is fairly straightforward, as we already identify most
platforms by PCI ID in display probe anyway.
As the first step, add platform descriptors with pointers to display
info. We'll have more platforms than display info, so minimize
duplication:
- Add separate skl/kbl/cfl/cml descriptors while they share the display
info.
- Add separate jsl/ehl descriptors while they share the display info.
Identify ADL-P (and derivatives) and DG2 descriptors by their names even
though their display info is Xe LPD or HPD.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45425c155608403efc149d4a022c0b443aa71200.1716399081.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Set the Link Off Between Frames Enable bit in ALPM_CTL register.
Note: Lobf need to be enabled adaptive sync fixed refresh mode
where vmin = vmax = flipline, which will arise after cmmr feature
enablement. Will add enabling sequence in a separate patch.
v1: Initial version.
v2: Condition check modified in alpm_configure(). [Jouni]
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529200742.1694401-6-animesh.manna@intel.com
Link Off Between Active Frames, is a new feature for eDP
that allows the panel to go to lower power state after
transmission of data. This is a feature on top of ALPM, AS SDP.
Add compute config during atomic-check phase.
v1: RFC version.
v2: Add separate flag for auxless-alpm. [Jani]
v3:
- intel_dp->lobf_supported replaced with crtc_state->has_lobf. [Jouni]
- Add DISPLAY_VER() check. [Jouni]
- Modify function name of get_aux_less_status. [Jani]
v4: Add enum alpm_mode to hold the aux-wake/less capability.
v5: Add alpm_dpcd to intel_dp and use aux_wake_supported()/
aux_less_wake_supported() instead of enum alpm_mode. [Jouni]
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529200742.1694401-5-animesh.manna@intel.com
eDP1.5 adds some more bits into DP_RECEIVER_ALPM_CAP and
DP_RECEIVER_ALPM_CONFIG registers. Add definitions for these.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529200742.1694401-4-animesh.manna@intel.com
In the function kvm_riscv_vcpu_set_reg_isa_ext, the original code
used incorrect reg_subtype labels KVM_REG_RISCV_SBI_MULTI_EN/DIS.
These have been corrected to KVM_REG_RISCV_ISA_MULTI_EN/DIS respectively.
Although they are numerically equivalent, the actual processing
will not result in errors, but it may lead to ambiguous code semantics.
Fixes: 613029442a ("RISC-V: KVM: Extend ONE_REG to enable/disable multiple ISA extensions")
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/ff1c6771a67d660db94372ac9aaa40f51e5e0090.1716429371.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
When the maximum hart number within groups is 1, hart-index-bit is set to
0. Consequently, there is no need to restore the hart ID from IMSIC
addresses and hart-index-bit settings. Currently, QEMU and kvmtool do not
pass correct hart-index-bit values when the maximum hart number is a
power of 2, thereby avoiding this issue. Corresponding patches for QEMU
and kvmtool will also be dispatched.
Fixes: 89d01306e3 ("RISC-V: KVM: Implement device interface for AIA irqchip")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240415064905.25184-1-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Commit bf20ab538c ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
attempts to revert the code change introduced by commit cd5ab1b0fc
("blk-throttle: add .low interface"). However, it leaves behind the
bps_conf[] and iops_conf[] fields in the throtl_grp structure which
aren't set anywhere in the new blk-throttle.c code but are still being
used by tg_prfill_limit() to display the limits in io.max. Now io.max
always displays the following values if a block queue is used:
<m>:<n> rbps=0 wbps=0 riops=0 wiops=0
Fix this problem by removing bps_conf[] and iops_conf[] and use bps[]
and iops[] instead to complete the revert.
Fixes: bf20ab538c ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW")
Reported-by: Justin Forbes <jforbes@redhat.com>
Closes: https://github.com/containers/podman/issues/22701#issuecomment-2120627789
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240530134547.970075-1-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit d976c6f4b3 ("of: property: Add fw_devlink support for
interrupt-map property") tried to do what it says on the tin,
but failed on a couple of points:
- it confuses bytes and cells. Not a huge deal, except when it
comes to pointer arithmetic
- it doesn't really handle anything but interrupt-maps that have
their parent #address-cells set to 0
The combinations of the two leads to some serious fun on my M1
box, with plenty of WARN-ON() firing all over the shop, and
amusing values being generated for interrupt specifiers.
Having 2 versions of parsing code for "interrupt-map" was a bad
idea. Now that the common parsing parts have been refactored
into of_irq_parse_imap_parent(), rework the code here to use it
instead and fix the pointer arithmetic.
Note that the dependency will be a bit different than the original code
when the interrupt-map points to another interrupt-map. In this case,
the original code would resolve to the final interrupt controller. Now
the dependency is the parent interrupt-map (which itself should have a
dependency to the parent). It is possible that a node with an
interrupt-map has no driver.
Fixes: d976c6f4b3 ("of: property: Add fw_devlink support for interrupt-map property")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Co-developed-by: Rob Herring (Arm) <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20240529-dt-interrupt-map-fix-v2-2-ef86dc5bcd2a@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Factor out the parsing of interrupt-map interrupt parent phandle and its
arg cells to a separate function, of_irq_parse_imap_parent(), so that it
can be used in other parsing scenarios (e.g. fw_devlink).
There was a refcount leak on non-matching entries when iterating thru
"interrupt-map" which is fixed.
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20240529-dt-interrupt-map-fix-v2-1-ef86dc5bcd2a@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
An error unrelated to ufshcd_try_to_abort_task is being logged and can
cause confusion. Modify ufshcd_mcq_abort() to print the result of the abort
failure. For readability, return immediately instead of 'goto'.
Fixes: f1304d4420 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240524015904.1116005-1-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In order to validate drm/msm register definition files against schema,
reuse the nodebugfs build step. The validation entry is guarded by
the EXPERT Kconfig option and we don't want to enable that option for
all the builds.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503-fd-fix-lxml-v2-2-f80a60ce21a1@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
- One pcode polling timeout change
- One fix for deadlocks for faulting VMs
- One error-path lock imbalance fix
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZlirfAAKCRC4FpNVCsYG
vwalAQD6DkKE47jSCctG0JwKFL3BARZAxmTnTPhsoPcmQTKtMAD+KME0KZmPaY0v
SrT2YKXpPp4tkmmtSyQcHeolk65KLgw=
=+tyt
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-05-30' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- One pcode polling timeout change
- One fix for deadlocks for faulting VMs
- One error-path lock imbalance fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZlisNHzgoq9nVg6g@fedora
drm/i915 fixes for v6.10-rc2:
- Fix a race in audio component by registering it later
- Make DPT object unshrinkable to avoid shrinking when framebuffer has
not shrunk
- Fix CCS id calculation to fix a perf regression
- Fix selftest caching mode
- Fix FIELD_PREP compiler warnings
- Fix indefinite wait for GT wakeref release
- Revert overeager multi-gt pm reference removal
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a5k7iwod.fsf@intel.com
The initialization order of GT topology, MCR, PAT and GuC HWconfig
as done today by native/PF driver, can't be followed as-is by the
VF driver, since fuse registers used in GT topology discovery will
be obtained by the VF driver from the GuC in HWconfig step.
While native/PF drivers need to program the HW PAT table prior to
loading the GuC, this requires only multicast writes support from
the MCR code, which could be initialized separately from the full
MCR support that requires the GT topology to setup steering data.
Split MCR initialization into two steps to avoid introducing VF
specific code paths. This also fixes duplicated spin_lock inits.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530115814.1284-1-michal.wajdeczko@intel.com
There is no point in mixing register access and VRAM code in the
same file. Move and rename the VRAM probe function to a new file
(there are no other changes other then new simple kernel-doc).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530133527.1328-5-michal.wajdeczko@intel.com
Rename static functions to align with our typical coding style.
While at it, downgrade the existing kernel-doc for internal
function to normal comment.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530133527.1328-4-michal.wajdeczko@intel.com
We should keep all hardware definitions separated from the driver
code. Move LMEM_BAR definition to new regs/xe_bars.h file and also
add there GTTMMADR_BAR definition to avoid using magic 0 resource.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530133527.1328-3-michal.wajdeczko@intel.com
We should not define registers directly in the code while we have
dedicated files for all register definitions. Move XEHP_MTCFG_ADDR
to regs/xe_regs.h
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530133527.1328-2-michal.wajdeczko@intel.com
A zoned device may have a last sequential write required zone that is
smaller than other zones. However, all tests to check if a zone write
plug write offset exceeds the zone capacity use the same capacity
value stored in the gendisk zone_capacity field. This is incorrect for a
zoned device with a last runt (smaller) zone.
Add the new field last_zone_capacity to struct gendisk to store the
capacity of the last zone of the device. blk_revalidate_seq_zone() and
blk_revalidate_conv_zone() are both modified to get this value when
disk_zone_is_last() returns true. Similarly to zone_capacity, the value
is first stored using the last_zone_capacity field of struct
blk_revalidate_zone_args. Once zone revalidation of all zones is done,
this is used to set the gendisk last_zone_capacity field.
The checks to determine if a zone is full or if a sector offset in a
zone exceeds the zone capacity in disk_should_remove_zone_wplug(),
disk_zone_wplug_abort_unaligned(), blk_zone_write_plug_init_request(),
and blk_zone_wplug_prepare_bio() are modified to use the new helper
functions disk_zone_is_full() and disk_zone_wplug_is_full().
disk_zone_is_full() uses the zone index to determine if the zone being
tested is the last one of the disk and uses the either the disk
zone_capacity or last_zone_capacity accordingly.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240530054035.491497-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit ecfe43b11b ("block: Remember zone capacity when revalidating
zones") introduced checks to ensure that the capacity of the zones of
a zoned device is constant for all zones. However, this check ignores
the possibility that a zoned device has a smaller last zone with a size
not equal to the capacity of other zones. Such device correspond in
practice to an SMR drive with a smaller last zone and all zones with a
capacity equal to the zone size, leading to the last zone capacity being
different than the capacity of other zones.
Correctly handle such device by fixing the check for the constant zone
capacity in blk_revalidate_seq_zone() using the new helper function
disk_zone_is_last(). This helper function is also used in
blk_revalidate_zone_cb() when checking the zone size.
Fixes: ecfe43b11b ("block: Remember zone capacity when revalidating zones")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240530054035.491497-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A zoned device with a smaller last zone together with a zone capacity
smaller than the zone size does make any sense as that does not
correspond to any possible setup for a real device:
1) For ZNS and zoned UFS devices, all zones are always the same size.
2) For SMR HDDs, all zones always have the same capacity.
In other words, if we have a smaller last runt zone, then this zone
capacity should always be equal to the zone size.
Add a check in null_init_zoned_dev() to prevent a configuration to have
both a smaller zone size and a zone capacity smaller than the zone size.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240530054035.491497-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>