Every enctype points .wrap and .unwrap at gss_krb5_wrap_v2()
and gss_krb5_unwrap_v2(). As with get_mic/verify_mic, the
indirection dates from when v1 enctypes had different wrap
implementations. Call the functions directly and remove the
pointers from struct gss_krb5_enctype.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Every enctype in the table points .get_mic and .verify_mic at
the same pair of functions. The indirection served no purpose
after the v1 enctype support was removed. Call
gss_krb5_get_mic_v2() and gss_krb5_verify_mic_v2() directly
from the GSS mechanism dispatch and drop the function pointers
from struct gss_krb5_enctype.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
gss_krb5_verify_mic_v2() currently recomputes a checksum using
gss_krb5_checksum() and then compares it against the received
checksum with memcmp(). Replace this with a call to
crypto_krb5_verify_mic(), which performs the hash, comparison,
and offset/length adjustment in a single operation through the
crypto/krb5 library.
The scatterlist layout required by RFC 4121 Section 4.2.4 is
constructed via gss_krb5_mic_build_sg(), the shared helper
introduced in the preceding commit. The received checksum
occupies the first scatterlist entry, pointing directly into
the token buffer.
The errno result from crypto_krb5_verify_mic() is mapped to a
GSS major status code via gss_krb5_errno_to_status(), which
returns GSS_S_BAD_SIG for -EBADMSG (checksum mismatch).
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
gss_krb5_get_mic_v2() currently computes the MIC checksum by
driving a crypto_ahash directly, calling gss_krb5_checksum()
with the message body and GSS token header. Replace this with
a call to crypto_krb5_get_mic(), which performs the same keyed
hash operation through the crypto/krb5 library.
RFC 4121 Section 4.2.4 specifies that the checksum covers the
message body followed by the token header. Because the
crypto/krb5 metadata parameter is hashed before the data, the
GSS header cannot be passed as metadata. Instead, the header
is appended to the scatterlist after the body data, producing
the correct hash input ordering without using the metadata
parameter.
The scatterlist layout is:
[checksum_output | message_body | gss_header]
The first scatterlist entry points directly into the
token buffer, so the checksum is written in place.
A shared helper, gss_krb5_mic_build_sg(), is introduced in
gss_krb5_crypto.c to construct this scatterlist layout. The
helper handles overflow allocation and scatterlist chaining
for large xdr_buf page arrays. It is reused by the verify_mic
counterpart in the following commit.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Camellia enctypes (RFC 6803) use the same MtE authenticated
encryption construction as AES-SHA1 (RFC 3962), implemented in
crypto/krb5 by the rfc3961_simplified profile. The encrypt path
already uses gss_krb5_aead_encrypt() for Camellia, but the decrypt
path was left on the old gss_krb5_aes_decrypt() code when the AES
enctypes were migrated.
Switch the Camellia .decrypt callback to gss_krb5_aead_decrypt() to
complete the AEAD migration for all enctypes. The conf_len and
cksum_len values in crypto/krb5's Camellia enctype descriptors match
the block size and checksum length that gss_krb5_aes_decrypt() was
using, so the headskip and tailskip returned to the unwrap layer are
unchanged.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace the per-enctype .decrypt callbacks (gss_krb5_aes_decrypt
and krb5_etm_decrypt) with a single gss_krb5_aead_decrypt()
wrapper that delegates to crypto_krb5_decrypt().
The new wrapper builds a scatterlist covering the secured
region (confounder through checksum), passes it to the AEAD
decrypt operation, and derives the confounder and checksum
lengths from the data offset and length that
crypto_krb5_decrypt() reports. The caller's token header
verification and buffer adjustment logic is unchanged.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Replace the per-enctype .encrypt callbacks (gss_krb5_aes_encrypt and
krb5_etm_encrypt) with a single gss_krb5_aead_encrypt() wrapper that
delegates to crypto_krb5_encrypt().
The xdr_buf setup -- GSS header insertion, confounder space
allocation, and token header copy -- remains unchanged. The
difference is that the CBC-CTS encryption and HMAC computation are
now a single AEAD operation through the crypto/krb5 library. Both
the MtE construction (RFC 3962) and the EtM construction (RFC 8009)
are handled transparently by the AEAD transform.
The plaintext page data must be copied from the page cache pages to
the scratch output pages before building the scatterlist, since the
AEAD operates in-place rather than using separate input and output
scatterlists.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Allocate crypto_aead handles for encryption (one per direction)
and crypto_shash handles for checksumming (one per direction)
using the crypto/krb5 library's key preparation functions.
These four handles derive their subkeys from the session key
and the RFC 4121 usage numbers and are ready for use in
encrypt, decrypt, get_mic, and verify_mic operations.
The existing crypto_sync_skcipher and crypto_ahash handles
remain in place for now; subsequent patches switch the
per-message operations to the new handles and then remove
the old ones.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The crypto/krb5 library returns standard negative errno values,
but the GSS mechanism layer reports results as GSS_S_* major
status codes. A translation is needed at each call site that
will be switched to the new library.
Rather than open-coding the mapping in every wrapper, provide a
single helper function.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The crypto/krb5 library accepts data in scatterlist form, but
the GSS-API layer presents RPC payloads as struct xdr_buf.
Bridge that gap with a pair of helper functions:
xdr_buf_to_sg() - populate a caller-supplied scatterlist
array from a byte range
xdr_buf_to_sg_alloc() - populate a caller-supplied inline
scatterlist, chaining to a heap-
allocated overflow for large payloads
The inline array (typically stack-allocated at eight entries)
covers the common case of small RPCs with no heap allocation
on the encrypt/decrypt path. Only buffers spanning many pages
incur a kmalloc for the chained extension.
The segment-walking logic follows the same head, page array,
tail traversal as xdr_process_buf(), but populates a
scatterlist directly rather than invoking a per-segment
callback. sg_next() traversal makes the walker safe for
chained scatterlists. Once subsequent patches reroute all
per-message crypto operations through crypto/krb5,
xdr_process_buf() loses its last callers and is removed.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Each krb5_ctx currently points to a gss_krb5_enctype, the
rpcsec_gss_krb5 module's own enctype descriptor. To begin
using the common crypto/krb5 library, store a pointer to the
corresponding struct krb5_enctype (from <crypto/krb5.h>) as
well.
The lookup is performed in gss_import_v2_context() immediately
after the existing gss_krb5_lookup_enctype() call. If
crypto_krb5_find_enctype() cannot find a matching enctype the
context import fails, ensuring the module never operates with
a partially-initialized krb5_ctx.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The rpcsec_gss_krb5 module currently contains its own Kerberos 5
crypto implementation (key derivation, encryption, checksumming)
that duplicates functionality available in the common crypto/krb5
library. As a first step toward migrating to that library, add a
Kconfig select so that building rpcsec_gss_krb5 pulls in the
common Kerberos 5 crypto support.
The per-enctype Kconfig options (AES_SHA1, CAMELLIA, AES_SHA2)
remain: they continue to gate which encryption types are offered
by the GSS mechanism. The individual crypto algorithm selects
they carry become redundant once the migration is complete, since
CRYPTO_KRB5 already selects all needed ciphers and hashes.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The new get-reqs dump operations added to sunrpc_cache.yaml and
nfsd.yaml place the "requests" nested attribute under dump.request.
A netlink dump carries an empty request; its payload travels back
in the reply. Because the spec names no reply attributes, the YNL
C code generator synthesizes a forward reference to a
<op>_rsp struct that is never defined, breaking any consumer of
these specs.
This first surfaced when Thorsten Leemhuis built tools/net/ynl
against -next:
nfsd-user.h:746: error: field 'obj' has incomplete type
struct nfsd_svc_export_get_reqs_rsp obj ...
nfsd-user.h:826: error: field 'obj' has incomplete type
struct nfsd_expkey_get_reqs_rsp obj ...
nfsd-user.c:1211: error: 'nfsd_svc_export_get_reqs_rsp_parse'
undeclared
sunrpc_cache.yaml has the same defect in ip-map-get-reqs and
unix-gid-get-reqs, but nfsd.yaml errors out first in the Makefile's
alphabetical build order and hides the sunrpc failures.
These bugs were introduced by incorrect merge conflict resolution.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/linux-nfs/f6a3ca6d-e5cb-4a5c-9af2-8d2b1ce33ef0@leemhuis.info/
Fixes: 1045ccf519ce30 ("sunrpc: add netlink upcall for the auth.unix.ip cache")
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a new SUNRPC_CMD_CACHE_FLUSH generic netlink command that allows
userspace to flush the sunrpc auth caches (ip_map and unix_gid) without
writing to /proc/net/rpc/*/flush.
An optional SUNRPC_A_CACHE_FLUSH_MASK u32 attribute selects which caches
to flush (bit 1 = ip_map, bit 2 = unix_gid). If the attribute is
omitted, all sunrpc caches are flushed.
This is used by exportfs to replace its /proc-based cache_flush() with a
netlink equivalent, with /proc fallback for older kernels.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the svc_export (nfsd.export)
cache to Documentation/netlink/specs/nfsd.yaml and regenerate the
resulting files.
Implement nfsd_cache_notify() which sends a NFSD_CMD_CACHE_NOTIFY
multicast event to the "exportd" group, carrying the cache type so
userspace knows which cache has pending requests.
Implement nfsd_nl_svc_export_get_reqs_dumpit() which snapshots
pending svc_export cache requests and sends each entry's seqno,
client name, and path over netlink.
Implement nfsd_nl_svc_export_set_reqs_doit() which parses svc_export
cache responses from userspace (client, path, expiry, flags, anon
uid/gid, fslocations, uuid, secinfo, xprtsec, fsid, or negative
flag) and updates the cache via svc_export_lookup() /
svc_export_update().
Wire up the svc_export_notify() callback in svc_export_cache_template
so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with
NFSD_CACHE_TYPE_SVC_EXPORT.
Note that the export-flags and xprtsec-mode enums are organized to match
their counterparts in include/uapi/linux/nfsd/export.h. The intent is
that future export options will only be added to the netlink headers,
which should eliminate the need to keep so much in sync.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the unix_gid (auth.unix.gid)
cache, using the sunrpc generic netlink family.
Add unix-gid attribute-set (seqno, uid, gids multi-attr, negative,
expiry), unix-gid-reqs wrapper, and unix-gid-get-reqs /
unix-gid-set-reqs operations to the sunrpc_cache YAML spec and
generated headers.
Implement sunrpc_nl_unix_gid_get_reqs_dumpit() which snapshots pending
unix_gid cache requests and sends each entry's seqno and uid over
netlink.
Implement sunrpc_nl_unix_gid_set_reqs_doit() which parses unix_gid
cache responses from userspace (uid, expiry, gids as u32 multi-attr
or negative flag) and updates the cache via unix_gid_lookup() /
sunrpc_cache_update().
Wire up unix_gid_notify() callback in unix_gid_cache_template so
cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with
SUNRPC_CACHE_TYPE_UNIX_GID.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add netlink-based cache upcall support for the ip_map (auth.unix.ip)
cache, using the sunrpc generic netlink family.
Add ip-map attribute-set (seqno, class, addr, domain, negative, expiry),
ip-map-reqs wrapper, and ip-map-get-reqs / ip-map-set-reqs operations
to the sunrpc_cache YAML spec and generated headers.
Implement sunrpc_nl_ip_map_get_reqs_dumpit() which snapshots pending
ip_map cache requests and sends each entry's seqno, class name, and
IP address over netlink.
Implement sunrpc_nl_ip_map_set_reqs_doit() which parses ip_map cache
responses from userspace (class, addr, expiry, and domain name or
negative flag) and updates the cache via __ip_map_lookup() /
__ip_map_update().
Wire up ip_map_notify() callback in ip_map_cache_template so cache
misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with
SUNRPC_CACHE_TYPE_IP_MAP.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The auth.unix.ip and auth.unix.gid caches live in the sunrpc module,
so they cannot use the nfsd generic netlink family. Create a new
"sunrpc" generic netlink family with its own "exportd" multicast
group to support cache upcall notifications for sunrpc-resident
caches.
Define a YAML spec (sunrpc_cache.yaml) with a cache-type enum
(ip_map, unix_gid), a cache-notify multicast event, and the
corresponding uapi header.
Implement sunrpc_cache_notify() in cache.c, which checks for
listeners on the exportd multicast group, builds and sends a
SUNRPC_CMD_CACHE_NOTIFY message with the cache-type attribute.
Register/unregister the sunrpc_nl_family in init_sunrpc() and
cleanup_sunrpc().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add sunrpc_cache_requests_count() and sunrpc_cache_requests_snapshot()
to allow callers to count and snapshot the pending upcall request list
without exposing struct cache_request outside of cache.c.
Both functions skip entries that no longer have CACHE_PENDING set.
The snapshot function takes a cache_get() reference on each item so the
caller can safely use them after the queue_lock is released.
These will be used by the nfsd generic netlink dumpit handler for
svc_export upcall requests.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A later patch will be changing the kernel to send a netlink notification
when there is a pending cache_request. Add a new cache_notify operation
to struct cache_detail for this purpose.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Rename cache_pipe_upcall() to cache_do_upcall() in anticipation of the
addition of a netlink-based upcall mechanism.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This function doesn't have anything to do with a timeout. The only
difference is that it warns if there are no listeners. Rename it to
sunrpc_cache_upcall_warn().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since it will soon also send an upcall via netlink, if configured.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_xprt_resource_released() calls svc_xprt_enqueue()
whenever XPT_DATA or XPT_DEFERRED is set. During RPC
processing, svc_reserve_auth() reduces the reservation
counter and triggers this path while the current thread
still holds XPT_BUSY. The enqueue enters svc_xprt_ready(),
executes an smp_rmb(), READ_ONCE(), and tracepoint, then
returns false on seeing XPT_BUSY.
Trace data from a 256KB NFSv3 WRITE workload over TCP
shows this pattern generates roughly 195,000 wasted
enqueue calls -- approximately one per RPC -- each
paying the full svc_xprt_ready() cost for no benefit.
Add a BUSY check alongside the existing DATA|DEFERRED
check in svc_xprt_resource_released(). When the
transport is BUSY, the holder will call
svc_xprt_received() upon completion, which already
checks for pending work flags and re-enqueues.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_xprt_received() unconditionally calls
svc_xprt_enqueue() after clearing XPT_BUSY. When no
work flags are pending, the enqueue traverses
svc_xprt_ready() -- executing an smp_rmb(), READ_ONCE(),
and tracepoint -- before returning false.
Trace data from a 256KB NFSv3 workload over RDMA shows
85% of svc_xprt_received() invocations reach
svc_xprt_enqueue() with no pending work flags. In the
WRITE phase, 167,335 of 196,420 calls find no work; in
the READ phase, 97,165 of 98,276. Each unnecessary call
executes a memory barrier, a flags read, and (when
tracing is active) fires the svc_xprt_enqueue
tracepoint.
Add a flags pre-check between clear_bit(XPT_BUSY) and
svc_xprt_enqueue(). Both the clear and the subsequent
READ_ONCE operate on the same xpt_flags word, so
cache-line serialization of the atomic bitops ensures
the read observes any flag set by a concurrent producer
before the line was acquired for the clear. If a
producer's set_bit occurs after the clear_bit, that
producer's own svc_xprt_enqueue() call observes
!XPT_BUSY and dispatches the transport.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_reserve() and svc_xprt_release_slot() call
svc_xprt_enqueue() after modifying xpt_reserved or
xpt_nr_rqsts. The purpose is to re-dispatch the
transport when write-space or a slot becomes available.
However, when neither XPT_DATA nor XPT_DEFERRED is
set, no thread can make progress on the transport and
the enqueue accomplishes nothing.
Trace data from a 256KB NFSv3 WRITE workload over RDMA
shows 11.2 svc_xprt_enqueue() calls per RPC. Of these,
6.9 per RPC lack XPT_DATA and exit svc_xprt_ready()
immediately after executing the smp_rmb(), READ_ONCE(),
and tracepoint. svc_reserve() and svc_xprt_release_slot()
account for roughly five of these per RPC.
A new helper, svc_xprt_resource_released(), checks
XPT_DATA | XPT_DEFERRED before calling
svc_xprt_enqueue(). The existing smp_wmb() barriers
are upgraded to smp_mb() to ensure the flags check
observes a concurrent producer's set_bit(XPT_DATA).
Each producer (svc_rdma_wc_receive, etc.) both sets
XPT_DATA and calls svc_xprt_enqueue(), so even if the
check reads a stale value, the producer's own enqueue
provides a fallback path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
This reverts commit cb3de96eea.
Fixes: cb3de96eea ("ipv6: preserve insertion order for same-scope addresses")
Reported-by: Chris Adams <linux@cmadams.net>
Closes: https://lore.kernel.org/netdev/20260521135310.GC977@cmadams.net/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260529112357.5079-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NQJ5
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-29
1) xfrm: route MIGRATE notifications to caller's netns
Thread the caller's netns through km_migrate() so that
MIGRATE notifications go to the issuing netns, fixing both the
init_net listener leak and MOBIKE notifications inside
non-init netns. From Maoyi Xie.
2) xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up so that allocated destination
pages are released on decompression errors, not only on success.
From Herbert Xu.
3) xfrm: Check for underflow in xfrm_state_mtu
Reject configurations that cause xfrm_state_mtu() to underflow,
preventing a negative TFCPAD value from becoming a memset size
that triggers an out-of-bounds write of several terabytes.
From David Ahern.
4) xfrm: ah: use skb_to_full_sk in async output callbacks
Convert the possibly-incomplete skb->sk to a full socket pointer
in async AH callbacks so that a request_sock or timewait_sock
never reaches xfrm_output_resume() downstream consumers.
From Michael Bommarito.
5) Add and revert: esp: fix page frag reference leak on skb_to_sgvec failure
The patch does not fix te issue completely.
6) xfrm: esp: restore combined single-frag length gate
Check the aligned post-trailer combined length against a page limit
in the fast path, preventing skb_page_frag_refill() from falling
back to a page too small for the destination scatterlist.
From Jingguo Tan.
7) xfrm: iptfs: reset runtime state when cloning SAs
Reinitialise the clone's mode_data runtime objects before
publishing it, preventing queued skbs from being freed with
list state copied from the original SA when migration fails.
From Shaomin Chen.
8) xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
Flush policy tables and drain the workqueue in a .pre_exit handler
so that cleanup_net() pays one RCU grace period per batch instead
of one per namespace, fixing stalls at high CLONE_NEWNET rates.
From Usama Arif.
9) xfrm: input: hold netns during deferred transport reinjection
Take a netns reference when queueing deferred transport reinjection
work and drop it after the callback completes, keeping the skb->cb
net pointer valid until the deferred work runs.
From Zhengchuan Liang.
* tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
xfrm: input: hold netns during deferred transport reinjection
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
xfrm: iptfs: reset runtime state when cloning SAs
xfrm: esp: restore combined single-frag length gate
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: ah: use skb_to_full_sk in async output callbacks
xfrm: Check for underflow in xfrm_state_mtu
xfrm: ipcomp: Free destination pages on acomp errors
xfrm: route MIGRATE notifications to caller's netns
====================
Link: https://patch.msgid.link/20260529092648.3878973-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SKBFL_MANAGED_FRAG_REFS is set, frag pages are not refcounted but
their lifetime is controlled by the attached ubuf_info. To make a copy
of the skb_shared_info, we either should clear the flag and reference
the frags, or keep the flag and have frags unreferenced.
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() don't
follow the rule and thus can leak page references. Let's clear
SKBFL_MANAGED_FRAG_REFS from the original skb to fix it. It's the
simplest way to address it, but there are more performant ways to do
that if it ever becomes a problem.
Link: https://lore.kernel.org/all/20260523085809.26331-1-nvminh232@clc.fitus.edu.vn/
Fixes: 753f1ca4e1 ("net: introduce managed frags infrastructure")
Reported-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/1e2086aa69217d7f9c8da3d38f5be7160f1b4cd1.1779993185.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b51 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260527053133.180695-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b51 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260527053133.180695-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry.
Fixes: 6fff607e2f ("bpf: sk_msg program helper bpf_msg_push_data")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yuqi Xu <xuyq21@lenovo.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/8b129d10566aa3eb43f61a8f9757bcf51707d324.1779636774.git.xuyq21@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Lin Ma <malin89@huawei.com>
Signed-off-by: Rongzhen Cui <cuirongzhen@huawei.com>
Signed-off-by: Jingguo Tan <tanjingguo@huawei.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260527023301.1075581-1-malin89@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 2982e599ff.
The patch does not fully fix the issue and the Author does
not match the 'Signed-off-by:' tag, so revert it for now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
- hci_core: Rework hci_dev_do_reset() to use hci_sync functions
- hci_conn: Fix memory leak in hci_le_big_terminate()
- hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
- hci_sync: Reset device counters in hci_dev_close_sync()
- hci_sync: fix UAF in hci_le_create_cis_sync
- L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
- L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
- L2CAP: use chan timer to close channels in cleanup_listen()
- L2CAP: clear chan->ident on ECRED reconfiguration success
- ISO: fix UAF in iso_recv_frame
- ISO: serialize iso_sock_clear_timer with socket lock
- HIDP: fix missing length checks in hidp_input_report()
- 6lowpan: check skb_clone() return value in send_mcast_pkt()
- btusb: Allow firmware re-download when version matches
- hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
-----BEGIN PGP SIGNATURE-----
iQJNBAABCgA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmoYP6oZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKX9SD/9+09g+LpkrBUyTsqaMiWii
4BNwbGG1kTzof/3pxmjxsJNbOi1u7wpA6gyGo9Opaaz3IjE5ZYnwblhSCjf7i0Qz
Txl8p5DPmTBHBevZLDA0OrTtxAtNKlOzGQLs/nrWikHvEBy0F20e5defcv9IMaAy
XAyv++EyZFznqwGU0iV2avXF4Gnfs6F1WL5f42jl0zwahB3pKZZik1HYOkg9JsIm
9/6qlBStf4VxATF+vN5OqY9K6xV2bPVC/htoBP4oMUbaDXbgZgDoTYScyvBOktBZ
DenyFzWogGKRWrOxgWA9RYnQ0VU+Orx0C5gf+DLbUY2uMGMlEwVAOBUUbDUsgsz8
m97hfJamNcpVv9+40v8QfYc1gF+k5OYQx1UCAvRSdmnkdycukeZXfScwx/35jHqj
BFExP7b5UtphUfjUiP/nEqZogiV4HXPoWF+X4Wnoe80dNhX0JGsjBjlBc6Da4ZOF
zdn9l+Qc/OvaMJV2OZIHFu28BBpgBAp+ujOhMRtlvSgvi1XUkf1InFEWdIg+NpiE
8JOD63huNXeGzKLhwyMfIQ8zsMNwQpn+gnE4vqHal6GhYhAMhSBtJxLBAdc8aZQR
91SFDl96ghNrRXfQlWfN7g2TdTZKCUzD5ZmOl1s/iv1rqENYA6WCwLXHe/6I03mT
hpx6ALMEjS8qud43JFfOOg==
=7Nv9
-----END PGP SIGNATURE-----
Merge tag 'for-net-2026-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Rework hci_dev_do_reset() to use hci_sync functions
- hci_conn: Fix memory leak in hci_le_big_terminate()
- hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
- hci_sync: Reset device counters in hci_dev_close_sync()
- hci_sync: fix UAF in hci_le_create_cis_sync
- L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
- L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
- L2CAP: use chan timer to close channels in cleanup_listen()
- L2CAP: clear chan->ident on ECRED reconfiguration success
- ISO: fix UAF in iso_recv_frame
- ISO: serialize iso_sock_clear_timer with socket lock
- HIDP: fix missing length checks in hidp_input_report()
- 6lowpan: check skb_clone() return value in send_mcast_pkt()
- btusb: Allow firmware re-download when version matches
- hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
* tag 'for-net-2026-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
Bluetooth: btusb: Allow firmware re-download when version matches
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate()
====================
Link: https://patch.msgid.link/20260528131839.462344-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_wait_for_connect() drops and re-acquires the socket lock while
waiting for the association to reach ESTABLISHED state. During this
window, another thread can peeloff the association to a new socket via
getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After
re-acquiring the old socket lock, sctp_wait_for_connect() returns
success without noticing the migration — the caller then accesses
the association under the wrong lock in sctp_datamsg_from_user().
Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf()
already has, returning an error if the association was migrated while
we slept.
Fixes: 668c9beb90 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260527032411.60959-1-kipreyyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth: vti: use ip6_tnl.net in vti6_changelink().
- eth: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=IBwj
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again significantly bigger than the same point into the
previous cycle, but at least smaller than last week.
I'm not aware of any pending regression for the current cycle.
Including fixes from netfilter.
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth:
- vti: use ip6_tnl.net in vti6_changelink().
- vxlan: do not reuse cached ip_hdr() value after
skb_tunnel_check_pmtu()"
* tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
dpll: zl3073x: make frequency monitor a per-device attribute
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
dpll: export __dpll_device_change_ntf() for use under dpll_lock
net/handshake: Drain pending requests at net namespace exit
net/handshake: Verify file-reference balance in submit paths
net/handshake: Close the submit-side sock_hold race
net/handshake: hand off the pinned file reference to accept_doit
net/handshake: Take a long-lived file reference at submit
net/handshake: Pass negative errno through handshake_complete()
nvme-tcp: store negative errno in queue->tls_err
net/handshake: Use spin_lock_bh for hn_lock
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
net: hibmcge: move dma_rmb() after dma_sync_single_for_cpu() in RX path
net: hibmcge: disable Relaxed Ordering to fix RX packet corruption
selftests/tc-testing: Add netem test case exercising loops
selftests/tc-testing: Add mirred test cases exercising loops
net/sched: act_mirred: Fix return code in early mirred redirect error paths
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
net/sched: fix packet loop on netem when duplicate is on
...
Before resetting or closing the device, protocol counters should also be
zeroed.
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained.
Fixes: 877afadad2 ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current HCI reset function in hci_core.c duplicates most of the work
done by hci_dev_close_sync(), and doesn't handle LE, advertising or
discovery.
Instead of porting these to hci_dev_do_reset(), directly call the
close/open functions from hci_sync to reset the hdev. MGMT now notifies
when a user performs a reset.
Suggested-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_reconf_rsp() returns early on success without clearing
chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp,
l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a
successful transaction to prevent the channel from matching subsequent
responses with the recycled ident value.
A remote attacker that completed a reconfiguration as the peer can
replay a failure response with the stale ident, causing the kernel to
match and destroy the already-established channel via
l2cap_chan_del(chan, ECONNRESET).
Clear chan->ident for all matching channels on success, and harden the
failure path by using l2cap_chan_hold_unless_zero() consistent with
other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident).
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-8-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The new file-reference contract on struct handshake_req is silently
breakable: a missing get_file() at submit or a missing fput() on an
error path leaves the file leaked but does not crash the test, so
the existing absence-of-crash checks pass either way.
Snapshot file_count(filp) before each handshake_req_submit() in
the submit-success, EAGAIN, EBUSY, and cancel tests, and assert
the expected balance after submit and again after cancel. The
already-completed cancel test also asserts the post-complete
balance, which pins down that handshake_complete() drops the
reference and that the subsequent cancel does not double-fput.
The destroy test gets the same treatment before __fput_sync(),
which double-checks that cancel's fput() ran and the only
remaining reference is the one sock_alloc_file() established.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-7-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_req_submit() publishes the request via
handshake_req_hash_add() and __add_pending_locked(), drops
hn_lock, and calls handshake_genl_notify() (which can sleep)
before taking sock_hold() on req->hr_sk. A fast tlshd ACCEPT
followed by DONE can drive handshake_complete()'s sock_put()
into the window between the spin_unlock and the late
sock_hold(); on a system where the consumer's fd held the
only sk reference, the late sock_hold() then operates on an
sk whose refcount has reached zero.
The preceding two patches install an explicit file reference
on struct handshake_req. That file pins sock->file, which
pins the embedded struct socket, which defers inet_release()'s
sock_put(). As long as hr_file is held, sk cannot reach refcount
zero from the consumer side, and the submit-side sock_hold()
with its matching sock_put() calls in handshake_complete() and
handshake_req_cancel() is now redundant.
Drop all three. The file reference already keeps each request's
socket alive, and the lifetime story is contained in a single
get_file()/fput() pair.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-6-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-5-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-4-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_complete() declares status as unsigned int and
tls_handshake_done() negates that value (-status) before handing
it to the TLS consumer. Consumers match on negative errno
constants -- xs_tls_handshake_done() has
switch (status) {
case 0:
case -EACCES:
case -ETIMEDOUT:
lower_transport->xprt_err = status;
break;
default:
lower_transport->xprt_err = -EACCES;
}
so the API as designed expects callers to pass positive errno
values that the tlshd shim then negates.
Three internal callers in handshake_nl_accept_doit(), the
net-exit drain, and a kunit test follow kernel convention and
pass negative errnos -- -EIO, -ETIMEDOUT, -ETIMEDOUT. The
implicit conversion to unsigned int turns -ETIMEDOUT into
0xFFFFFF92; the subsequent -status in tls_handshake_done()
wraps back to 110, the consumer's switch falls through, and
the xprt reports -EACCES on what should be -ETIMEDOUT or -EIO.
Fix the API rather than the call sites. The natural kernel
convention is negative errno in, negative errno out. Change
handshake_complete() and hp_done to take int status, drop the
negation in tls_handshake_done(), and negate once in
handshake_nl_done_doit() where status arrives from the wire
as an unsigned netlink attribute. The three internal callers
were already correct under that convention and need no change.
At the same wire boundary, declare MAX_ERRNO as the netlink
policy upper bound for HANDSHAKE_A_DONE_STATUS. Attribute
validation rejects out-of-range values before
handshake_nl_done_doit() runs, and negating a bounded u32 there
stays within int range -- closing the UBSAN-visible signed-
integer overflow that an unconstrained u32 would invoke.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-3-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>