Commit graph

168,951 commits

Author SHA1 Message Date
Amit Kucheria
3a9f5bd82d USB: musb: Refer to musb_otg_timer_func under correct #ifdef
musb_otg_timer_func() is defined under #ifdef CONFIG_USB_MUSB_OTG.
Make sure any reference to it is also under the same #ifdef.

Without this fix, the driver failes to compile when USB_OTG is defined
but USB_MUSB_OTG isn't.

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:11 -07:00
Sergei Shtylyov
f01b017d19 USB: musb_gadget_ep0: fix typo in service_zero_data_request()
This function uses wrong bit mask to prevent clearing RXCSR status
bits when halting an endpoint -- which results in clearing SentStall
and RxPktRdy bits (that the code actually tries to avoid); must be
a result of cut-and-paste...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:11 -07:00
Javier Martin
48c348cc93 USB: option.c to support Alcatel X060S/X200 broadband modems
Added support for the Alcatel X060S/X200 broadband modems to the option
driver. The device starts in cd-rom emulation mode (1bbb:f000) and
requires the use of the usb_modeswitch tool to switch it to modem mode
(1bbb:0000).

Signed-off-by: Javier Martin <jmartinj@iname.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:10 -07:00
Peng Huang
183791588e USB: serial: option: Add ZTE AC8710 usb modem device.
Signed-off-by: Peng Huang <shawn.p.huang@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:10 -07:00
Russell Lang
9d498beafc USB: aten uc2324 is really a moschip 7840
I've opened up the case, and the chips in the ATEN UC2324 are:

Moschip
MCS7840CV-AA
69507-6B1
0650
(USB to 4-port serial)

(logo with AF kerned together)  0748  
24BC02  
SINGLP
(unknown 8-pin chip)

(logo looks like 3 or Z in circle)
ZT3243LEEA    0752
B7A16420.T
(4 chips, so this will be RS232 line driver)
(Probably equivalent of Sipex SP3243)

So the ATEN 2324 (aten2011.c driver), is definitely the Moschip 7840,
and should use the mos7840.c driver.  I expect you will remove the
aten2011.c driver from the staging area.

From the aten2011.c source code, the device ID for the UC2322 (2 port
serial) is 0x7820, just like the Moschip evaluation board.  This value
should be added to the device id table of mos7840.c.

Here's a patch that adds these devices to the driver.


From: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:10 -07:00
Tim Gardner
f1469fc3ef USB: option: Add USB ID for Novatel MC727/U727/USB727 refresh
BugLink: https://bugs.launchpad.net/bugs/365291

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:10 -07:00
Herton Ronaldo Krzesinski
c420befde6 USB: option: add ZTE device ids and remove ONDA ids
Current listed Onda ids are ZTE devices. Replace them with ZTE id define
and add more ZTE device ids. Also remove 19d2:2000, this is the id when
device is first plugged in and is a CD-only device, before the switch
using eject.

These changes are based on a previous patch by Ming Zhao
<zhao.ming9@zte.com.cn>

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Ming Zhao <zhao.ming9@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:10 -07:00
Simon Kagstrom
bcfa4e68d8 USB: ehci-orion: Call ehci_reset before ehci_halt
I noticed that USB initialization didn't setup correctly on my kirkwood
based board (OpenRD base) if I hadn't initialized USB in U-boot first.
The error message looks like this:

  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  orion-ehci orion-ehci.0: Marvell Orion EHCI
  orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
  orion-ehci orion-ehci.0: can't setup
  orion-ehci orion-ehci.0: USB bus 1 deregistered
  orion-ehci orion-ehci.0: init orion-ehci.0 fail, -110
  orion-ehci: probe of orion-ehci.0 failed with error -110

which is caused by ehci_halt() timing out in the handshake() call. I
noticed that U-boot does a reset before calling handshake(), so this
patch does the same thing for Linux. USB now works for me.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:10 -07:00
Craig Shelley
8bf16ba7c8 USB: CP210x Add new device IDs
Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:10 -07:00
Ville Sundberg
fca4404c55 USB: ftdi_sio: Add support for GN Otometrics Aurical USB Audiometer
The patch adds support for the GN Otometrics Aurical USB Audiometer
(FT232BM-based).
A new VID and a new PID is added.

Signed-off-by: Ville Sundberg <vsundber@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:09 -07:00
Anand Gadiyar
715bfc22ce USB: OMAP: OHCI: hc_driver's stop method should call ohci_stop
OMAP: OHCI: hc_driver's stop method should call ohci_stop

Without this, the ohci-omap driver will not cleanup the debugfs
nodes when the driver is unloaded. So the next insmod will fail,
if CONFIG_DEBUG_FS and CONFIG_USB_DEBUG are both selected.

Reported-by: vikram pandita <vikram.pandita@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:09 -07:00
Giacomo Lozito
7a777919bb USB: storage: raise timeout in usb_stor_Bulk_max_lun
Requests to get max LUN, for certain USB storage devices, require a
longer timeout before a correct reply is returned. This happens for a
Realtek USB Card Reader (0bda:0152), which has a max LUN of 3 but is set
to 0, thus losing functionality, because of the timeout occurring too
quickly.

Raising the timeout value fixes the issue and might help other devices
to return a correct max LUN value as well.

Signed-off-by: Giacomo Lozito <james@develia.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:09 -07:00
Oliver Neukum
5f4fab91f2 USB: let the option driver compile without CONFIG_PM
This is needed for compilation without CONFIG_PM.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:09 -07:00
Carlos R. Mafra
f99aa3f9b6 USB: option: Remove unused variable
After commit f092c24049 ("USB: option:
remove unnecessary and erroneous code") the variable 'serial' becomes
unused, as gcc-4.3.2 points out:

drivers/usb/serial/option.c: In function 'option_instat_callback':
drivers/usb/serial/option.c:834: warning: unused variable 'serial'
drivers/usb/serial/option.c: In function 'option_open':
drivers/usb/serial/option.c:930: warning: unused variable 'serial'

So I removed it.

Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:31:09 -07:00
Linus Torvalds
ddb1d4ede9 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c/tsl2550: Fix lux value in dark environment
2009-07-28 14:31:02 -07:00
Linus Torvalds
655c5d8fc1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (22 commits)
  Btrfs: Fix async caching interaction with unmount
  Btrfs: change how we unpin extents
  Btrfs: Correct redundant test in add_inode_ref
  Btrfs: find smallest available device extent during chunk allocation
  Btrfs: clear all space_info->full after removing a block group
  Btrfs: make flushoncommit mount option correctly wait on ordered_extents
  Btrfs: Avoid delayed reference update looping
  Btrfs: Fix ordering of key field checks in btrfs_previous_item
  Btrfs: find_free_dev_extent doesn't handle holes at the start of the device
  Btrfs: Remove code duplication in comp_keys
  Btrfs: async block group caching
  Btrfs: use hybrid extents+bitmap rb tree for free space
  Btrfs: Fix crash on read failures at mount
  Btrfs: remove of redundant btrfs_header_level
  Btrfs: adjust NULL test
  Btrfs: Remove broken sanity check from btrfs_rmap_block()
  Btrfs: convert nested spin_lock_irqsave to spin_lock
  Btrfs: make sure all dirty blocks are written at commit time
  Btrfs: fix locking issue in btrfs_find_next_key
  Btrfs: fix double increment of path->slots[0] in btrfs_next_leaf
  ...
2009-07-28 14:27:06 -07:00
Andreas Eversberg
ce4adcc6e5 mISDN: Fix handling of receive buffer size in L1oIP
The size of receive buffer pointer was used to get size of
receive buffer instead of recvbuf_size itself, so only 4/8
bytes could be transfered.

This is a regression to 2.6.30 introduced by commit
8c90e11e35 ("mISDN: Use
kernel_{send,recv}msg instead of open coding")

Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-28 14:26:51 -07:00
Ramon de Carvalho Valle
f151cd2c54 eCryptfs: parse_tag_3_packet check tag 3 packet encrypted key size
The parse_tag_3_packet function does not check if the tag 3 packet contains a
encrypted key size larger than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES.

Signed-off-by: Ramon de Carvalho Valle <ramon@risesecurity.org>
[tyhicks@linux.vnet.ibm.com: Added printk newline and changed goto to out_free]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: stable@kernel.org (2.6.27 and 30)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-28 14:26:06 -07:00
Tyler Hicks
6352a29305 eCryptfs: Check Tag 11 literal data buffer size
Tag 11 packets are stored in the metadata section of an eCryptfs file to
store the key signature(s) used to encrypt the file encryption key.
After extracting the packet length field to determine the key signature
length, a check is not performed to see if the length would exceed the
key signature buffer size that was passed into parse_tag_11_packet().

Thanks to Ramon de Carvalho Valle for finding this bug using fsfuzzer.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: stable@kernel.org (2.6.27 and 30)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-28 14:26:06 -07:00
Lai Jiangshan
74e7ff8c50 tracing: Fix missing function_graph events when we splice_read from trace_pipe
About a half events are missing when we splice_read
from trace_pipe. They are unexpectedly consumed because we ignore
the TRACE_TYPE_NO_CONSUME return value used by the function graph
tracer when it needs to consume the events by itself to walk on
the ring buffer.

The same problem appears with ftrace_dump()

Example of an output before this patch:

1)               |      ktime_get_real() {
1)   2.846 us    |          read_hpet();
1)   4.558 us    |        }
1)   6.195 us    |      }

After this patch:

0)               |      ktime_get_real() {
0)               |        getnstimeofday() {
0)   1.960 us    |          read_hpet();
0)   3.597 us    |        }
0)   5.196 us    |      }

The fix also applies on 2.6.30

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
LKML-Reference: <4A6EEC52.90704@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-07-28 23:17:23 +02:00
Lai Jiangshan
38ceb592fc tracing: Fix invalid function_graph entry
When print_graph_entry() computes a function call entry event, it needs
to also check the next entry to guess if it matches the return event of
the current function entry.
In order to look at this next event, it needs to consume the current
entry before going ahead in the ring buffer.

However, if the current event that gets consumed is the last one in the
ring buffer head page, the ring_buffer may reuse the page for writers.
The consumed entry will then become invalid because of possible
racy overwriting.

Me must then handle this entry by making a copy of it.

The fix also applies on 2.6.30

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
LKML-Reference: <4A6EEAEC.3050508@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-07-28 23:17:23 +02:00
Barry Song
c8489c3ed3 ASoC: board driver to connect bf5xx with ad1938
Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-28 22:16:02 +01:00
Barry Song
01e2ab207c ASoC: blackfin I2S(TDM mode) CPU DAI driver
The I2S DAI driver for blackfin SPORT, but works in TDM mode.
I2S is not a special case of TDM with only left and right two slots for
SPORT interface. I2S coordinates with TDM in SPORT, but not a part of
TDM. TDM require different hardware configuration with I2S, not only
different slot number.  One is "Stereo Serial Operation" mode of SPORT,
the other one is "Multichannel Operation" mode. They are incompatible
at the same time.
Hardware and DMA description and data transfer flow are much different
for I2S and TDM. Merging them as a whole will be very ugly and difficult
to maintain.
So we don't define a new DAI type, but give two DAI instances for standard
I2S and TDM, both in I2S-family DAI type. The TDM instance still uses the
I2S-family DAI type.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-28 22:15:27 +01:00
Janusz Krzysztofik
b84eab08a6 ASoC: CX20442: fix issues pointed out by subsystem maintainer
The patch fixes some checkpatch identified issues and adds a comment about
line discipline interaction to my driver code, as requested by Mark on my
inital submission (thank you Mark for applying my imperfect patch anyway).
It also fixes MODULE_ALIAS mismatch as used in my machine driver.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-28 22:15:23 +01:00
Amit Kucheria
fb29900217 staging: udlfb: Add vmalloc.h include
Required for vmalloc_32 and vfree declarations on non-x86 platforms.

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:07:11 -07:00
Greg Kroah-Hartman
0bfc240575 staging: remove aten2011 driver
This driver is not needed, as the existing mos7840 driver works
properly for this device.

Thanks to Russell Lang for doing the work to figure this out.

Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:07:11 -07:00
David Rientjes
a6a9f81ccc Staging: android: lowmemorykiller.c: fix it for "oom: move oom_adj value from task_struct to mm_struct"
I'm about to merge "oom: move oom_adj value from task_struct to
mm_struct", and this fixup is needed to repair linux-next's
drivers/staging/android/lowmemorykiller.c.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:07:10 -07:00
Oliver Neukum
de8f8bd633 Staging: serqt_usb2: fix memory leak in error case
a standard memory leak, as later allocations may fail even if prior
allocations did not. Then the prior allocations must be undone.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:07:10 -07:00
Bill Pemberton
f3a756883a Staging: serqt_usb2: add missing calls to tty_kref_put()
tty_port_tty_get() was called without a corresponding tty_kref_put()
in qt_read_bulk_callback() and qt_close().

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 14:07:10 -07:00
Lucian Adrian Grijincu
a39ea210ec driver core: documentation: make it clear that sysfs is optional
The original text suggested that sysfs is mandatory and always
compiled in the kernel.

Signed-off-by: Lucian Adrian Grijincu <lgrijincu@ixiacom.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 13:45:23 -07:00
Xiaotian Feng
79f0313bfc driver core: sysdev: do not send KOBJ_ADD uevent if kobject_init_and_add fails
If kobject_init_and_add fails, sysdev_register should not send KOBJ_ADD
uevent to userspace.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 13:45:22 -07:00
Roel Kluin
4df7b3e037 Dynamic debug: fix typo: -/->
The member was intended, not the local variable.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Greg Banks <gnb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 13:45:22 -07:00
Ming Lei
3b4418c67a driver core: firmware_class:fix memory leak of page pointers array
The page pointers array is allocated in fw_realloc_buffer() called by
firmware_data_write(), and should be freed in release function of firmware
device.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 13:45:22 -07:00
Peter Oberparleiter
0f58b44582 sysfs: fix hardlink count on device_move
Update directory hardlink count when moving kobjects to a new parent.
Fixes the following problem which occurs when several devices are
moved to the same parent and then unregistered:

> ls -laF /sys/devices/css0/defunct/
> total 0
> drwxr-xr-x 4294967295 root root    0 2009-07-14 17:02 ./
> drwxr-xr-x        114 root root    0 2009-07-14 17:02 ../
> drwxr-xr-x          2 root root    0 2009-07-14 17:01 power/
> -rw-r--r--          1 root root 4096 2009-07-14 17:01 uevent

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28 13:45:21 -07:00
Andy Adamson
abfabf8caf nfsd41: encode replay sequence from the slot values
The sequence operation is not cached; always encode the sequence operation on
a replay from the slot table and session values. This simplifies the sessions
replay logic in nfsd4_proc_compound.

If this is a replay of a compound that was specified not to be cached, return
NFS4ERR_RETRY_UNCACHED_REP.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 16:12:34 -04:00
Jens Axboe
56ad1740d9 block: make the end_io functions be non-GPL exports
Prior to the change for more sane end_io functions, we exported
the helpers with the normal EXPORT_SYMBOL(). That got changed
to _GPL() for the new interface. Revert that particular change,
on the basis that this is basic functionality and doesn't dip
into internal structures. If these exports can't be non-GPL,
then we may as well make EXPORT_SYMBOL() imply GPL for
everything.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-28 22:11:24 +02:00
Andy Adamson
c8647947f8 nfsd41: rename nfsd4_enc_uncached_replay
This function is only used for SEQUENCE replay.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:30:36 -04:00
Andy Adamson
49557cc74c nfsd41: Use separate DRC for setclientid
Instead of trying to share the generic 4.1 reply cache code for the
CREATE_SESSION reply cache, it's simpler to handle CREATE_SESSION
separately.

The nfs41 single slot clientid DRC holds the results of create session
processing.  CREATE_SESSION can be preceeded by a SEQUENCE operation
(an embedded CREATE_SESSION) and the create session single slot cache must be
maintained.  nfsd4_replay_cache_entry() and nfsd4_store_cache_entry() do not
implement the replay of an embedded CREATE_SESSION.

The clientid DRC slot does not need the inuse, cachethis or other fields that
the multiple slot session cache uses.  Replace the clientid DRC cache struct
nfs4_slot cache with a new nfsd4_clid_slot cache.  Save the xdr struct
nfsd4_create_session into the cache at the end of processing, and on a replay,
replace the struct for the replay request with the cached version all while
under the state lock.

nfsd4_proc_compound will handle both the solo and embedded CREATE_SESSION case
via the normal use of encode_operation.

Errors that do not change the create session cache:
A create session NFS4ERR_STALE_CLIENTID error means that a client record
(and associated create session slot) could not be found and therefore can't
be changed.  NFSERR_SEQ_MISORDERED errors do not change the slot cache.

All other errors get cached.

Remove the clientid DRC specific check in nfs4svc_encode_compoundres to
put the session only if cstate.session is set which will now always be true.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:30:29 -04:00
Andy Adamson
88e588d56a nfsd41: change check_slot_seqid parameters
For separation of session slot and clientid slot processing.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:30:23 -04:00
Andy Adamson
5261dcf8eb nfsd41: remove redundant forechannel max requests check
This check is done in set_forechannel_maxreqs.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:30:15 -04:00
Andy Adamson
0c193054a4 nfsd41: hange from page to memory based drc limits
NFSD_SLOT_CACHE_SIZE is the size of all encoded operation responses
(excluding the sequence operation) that we want to cache.

For now, keep NFSD_SLOT_CACHE_SIZE at PAGE_SIZE. It will be reduced
when the DRC is changed from page based to memory based.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:30:05 -04:00
Andy Adamson
6a14dd1a4f nfsd41: reserve less memory for DRC
Also remove a slightly misleading comment.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:29:59 -04:00
Andy Adamson
b101ebbc39 nfsd41: minor set_forechannel_maxreqs cleanup
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:29:54 -04:00
Andy Adamson
be98d1bbd1 nfsd41: reclaim DRC memory on session free
This fixes a leak which would eventually lock out new clients.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:29:48 -04:00
J. Bruce Fields
413d63d710 nfsd: minor write_pool_threads exit cleanup
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:29:41 -04:00
Eric Sesterhenn
2522a776c1 Fix memory leak in write_pool_threads
kmemleak produces the following warning

unreferenced object 0xc9ec02a0 (size 8):
  comm "cat", pid 19048, jiffies 730243
  backtrace:
    [<c01bf970>] create_object+0x100/0x240
    [<c01bfadb>] kmemleak_alloc+0x2b/0x60
    [<c01bcd4b>] __kmalloc+0x14b/0x270
    [<c02fd027>] write_pool_threads+0x87/0x1d0
    [<c02fcc08>] nfsctl_transaction_write+0x58/0x70
    [<c02fcc6f>] nfsctl_transaction_read+0x4f/0x60
    [<c01c2574>] vfs_read+0x94/0x150
    [<c01c297d>] sys_read+0x3d/0x70
    [<c0102d6b>] sysenter_do_call+0x12/0x32
    [<ffffffff>] 0xffffffff

write_pool_threads() only frees nthreads on error paths, in the success case
we leak it.

Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-07-28 14:29:34 -04:00
Takashi Iwai
50c62f068e ALSA: hda - Don't create analog mixer for IDT92HD71bxx
The analog mixer unit on IDT 92HD71Bxx codecs is almost useless
since we use only the direct connections from DAC to pin.

Remove the controls to avoid unneeded confusion as default now.
This can be still back via "analog_mixer = 1" hint.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-28 18:28:27 +02:00
Takashi Iwai
6479c63188 ALSA: hda - Create Capture controls dynamically
Instead of static snd_kcontrol_new arrays, create "Capture Volume"
and "Capture Switch" controls dynamically based on the mixer attr
values (made via HDA_COMPOSE_AMP_VAL()).
This reduces the code size and gives more flexibility to change
the number of controls later.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-28 18:25:03 +02:00
Paul Mundt
9cef749269 sh: update_mmu_cache() consolidation.
This splits out a separate __update_cache()/__update_tlb() for
update_mmu_cache() to wrap in to. This lets us share the common
__update_cache() bits while keeping special __update_tlb() handling
broken out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-29 00:12:17 +09:00
Takashi Iwai
4417932315 ALSA: hda - Don't create unneeded digital input source for IDT 92HD71x
The current driver creates always the digital input source mixer
elements for IDT 92HD71x codecs no matter whether digital mics are
present.  This patch adds the proper check to avoid the creation of
these controls if unnecessary.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-28 17:03:49 +02:00