Commit graph

168,951 commits

Author SHA1 Message Date
Andreas Mohr
78df617acf ALSA: azt3328: fix previous breakage, improve suspend, cleanups
- fix my previous codec activity breakage (_non-warned_ variable assignment
  issue)
- convert suspend/resume to 32bit I/O access (I/O is painful; to improve
  suspend/resume performance)
- change DEBUG_PLAY_REC to DEBUG_CODEC for consistency
- printk cleanup
- some logging improvements
- minor cleanup/improvements

The variable assignment issue above was a conditional assignment to the
call_function variable (this ended with the non-preinitialized variable
not getting assigned in some cases, thus a dangling stack value, yet gcc 4.3.3
unbelievably did _NOT_ warn about it in this case!!),
needed to change this into _always_ assigning the check result.
Practical result of this bug was that when shutting down
_either_ playback or capture, _both_ streams dropped dead :P

Tested, working (plus resume) and checkpatch.pl:ed on 2.6.30-rc5,
applies cleanly to 2.6.30 proper with my previous (committed)
patches applied.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 12:03:26 +02:00
Clemens Ladisch
2d4b842014 sound: rawmidi: disable active-sensing-on-close by default
Sending an Active Sensing message when closing a port can interfere with
the following data if the port is reopened and a note-on is sent before
the device's timeout has elapsed.  Therefore, it is better to disable
this setting by default.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:57:20 +02:00
Clemens Ladisch
08d033405a sound: seq_oss_midi: remove magic numbers
Instead of using magic numbers for the controlles sent when resetting
a port, use the symbols from asoundef.h.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:57:08 +02:00
Clemens Ladisch
b86c87288c sound: seq_midi: do not send MIDI reset when closing
Sending a MIDI reset message when closing a port is wrong because we
only want to shut the device up, not to reset all settings.
Furthermore, many devices ignore this message.

Fortunately, the RawMIDI layer already shuts the device up, so we can
ignore this matter here.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:58 +02:00
Clemens Ladisch
a65dd997b3 sound: usb-audio: add MIDI drain callback
When draining, instead of waiting for fifty milliseconds, just wait for
the currently active URBs to complete.  This cuts the usual waiting time
down to one USB frame, or zero in the common case when there is no URB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:41 +02:00
Clemens Ladisch
ed4affa532 sound: usb-audio: use multiple output URBs
Some newer USB MIDI interfaces use rather small packet sizes, so to get
enough bandwidth, we have to be able to send multiple packets in one USB
frame, so we have to use multiple URBs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:30 +02:00
Clemens Ladisch
4773d1fb8f sound: usb-audio: use multiple input URBs
Some newer USB MIDI interfaces use rather small packet sizes, so to get
enough bandwidth, we have to be able to receive multiple packets in one
USB frame, so we have to use multiple URBs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:19 +02:00
Clemens Ladisch
f907ed94f9 seq-midi: always log message on output overrun
It turns out that the main cause of output buffer overruns is not slow
drivers but applications that generate too many messages.  Therefore, it
makes more sense to make that error message always visible, and to
rate-limit it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:56:06 +02:00
Clemens Ladisch
468b8fde24 sound: usb-audio: Xonar U1 digital output support
Add support for the Asus Xonar U1.  This device is mostly class compliant, but
the digital output requires a vendor-specific request.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:55:25 +02:00
Clemens Ladisch
8886f33f25 sound: usb-audio: add workaround for Blue Microphones devices
Blue Microphones USB devices have an alternate setting that sends two
channels of data to the computer.  Unfortunately, the descriptors of
that altsetting have a wrong channel setting, which means that any
recorded data from such a device has twice the sample rate from what
would be expected.

This patch adds a workaround to ignore that altsetting.  Since these
devices have only one actual channel, no data is lost.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-15 11:55:00 +02:00
Mark Brown
e465d544fa ASoC: Fix sample rate lookup in WM8993
We need to use the best value we picked, not the last value we
looked at.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-15 10:01:30 +01:00
Herbert Xu
b5ebd44eb7 crypto: xcbc - Fix incorrect error value when creating instance
If shash_alloc_instance() fails, we return the wrong error value.
This patch fixes it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-07-15 16:53:33 +08:00
Herbert Xu
3b3fc322d9 crypto: hmac - Fix incorrect error value when creating instance
If shash_alloc_instance() fails, we return the wrong error value.
This patch fixes it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-07-15 16:52:55 +08:00
Steffen Klassert
05ed8758fa crypto: cryptd - Fix uninitialized return value
If cryptd_alloc_instance() fails, the return value is uninitialized.
This patch fixes this by setting the return value.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-07-15 16:51:04 +08:00
Holger Brunck
3dc948da78 UBI: fix bug in image sequence number handling
This patch fixes a bug in the image seq. number handling in the
scanning level. The assignment of the image_seq was incorrect.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-15 11:30:59 +03:00
Artem Bityutskiy
c8cc452501 UBI: gluebi: initialize ubi_num field
Do not forget to initialize 'gluebi->ubi_num' because otherwise
it will stay 0 even for ubi1 device, and gluebi will open
wrong UBI device when 'gluebi_get_device()' is called.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-15 11:30:55 +03:00
Andreas Schwab
0115cb544b powerpc: Fix another bug in move of altivec code to vector.S
When moving load_up_altivec to vector.S a typo in a comment caused a
thinko setting the wrong variable.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-15 17:41:46 +10:00
Dave Kleikamp
28477fb1ed powerpc: Fix booke user_disable_single_step()
On booke processors, gdb is seeing spurious SIGTRAPs when setting a
watchpoint.

user_disable_single_step() simply quits when the DAC is non-zero.  It should
be clearing the DBCR0_IC and DBCR0_BT bits from the dbcr0 register and
TIF_SINGLESTEP from the thread flag.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-15 17:41:45 +10:00
David Woodhouse
0db9b7aebb intel-iommu: Kill pointless intel_unmap_single() function
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-15 08:17:26 +01:00
David Woodhouse
acea0018a2 intel-iommu: Defer the iotlb flush and iova free for intel_unmap_sg() too.
I see no reason why we did this _only_ in intel_unmap_page().

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-15 08:17:23 +01:00
David Woodhouse
3d39cecc48 intel-iommu: Remove superfluous iova_alloc_lock from IOVA code
We only ever obtain this lock immediately before the iova_rbtree_lock,
and release it immediately after the iova_rbtree_lock. So ditch it and
just use iova_rbtree_lock.

[v2: Remove the lockdep bits this time too]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-15 08:17:02 +01:00
Alex Deucher
c836e86280 drm/radeon/kms: fix hotspot handling on pre-avivo chips
Need to adjust CUR_OFFSET for yorigin

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:24 +10:00
Alex Deucher
eb1300bcd7 drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740
Allows us to hit dot clocks much closer, especially on
chips with non-27 Mhz reference clocks like most IGP chips.
This fixes most flickering and blanking problems with
non-exact dot clocks on these chips.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:23 +10:00
Alex Deucher
d0e275a90a drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq
This is needed when using fractional feedback dividers on some IGP
chips.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:22 +10:00
Dave Airlie
b995e4330d drm/radeon/kms: block RN50 from using 3D engine.
RN50/ES1000 is a cut-down rv100 chip used in the server market.
The 3D engine on these is either not there or unverified so refuse
any attempt to configure registers on it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:21 +10:00
Dave Airlie
2a0f8918fc drm/radeon/kms: fix VRAM sizing like DDX does it.
Doing this like the DDX seems like the most sure fire way to avoid
having to reinvent it slowly and painfully. At the moment we keep
getting things wrong with aper vs vram, so we know the DDX does it right.

booted on PCI r100, PCIE rv370, IGP rs400.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:19 +10:00
Dave Airlie
ad49f50186 drm/ttm/radeon: add dma32 support.
This add support for using dma32 memory on gpus that really need it.

Currently IGPs are left without DMA32 but we might need to change
that unless we can fix rs690.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:18 +10:00
Michel Dänzer
61b576dbbe drm/radeon: Endianness fixes for radeondrmfb.
For now handle it via r/g/b offsets and disallow 16 bpp modes on big endian
machines.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:17 +10:00
Dave Airlie
77bd36f014 drm/radeon/kms: don't swap PCIEGART PTEs in VRAM.
On powerpc, since we aren't using any hw swappers, this will
get flipped around by default in hw.

tested on a G5 + rv515.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:16 +10:00
Dave Airlie
5176fdc4c5 drm/radeon/kms: drop zero length CS indirect buffers.
If userspace sends a zero length IB, it really shouldn't have bothered
so EINVAL it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:15 +10:00
Dave Airlie
e7168cab5b drm/radeon/kms: fix vram vs aper size check.
Fix this to be correct like the DDX code, looks like a typo
on transfer to the kernel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:14 +10:00
Alex Deucher
2007d633d6 drm/radeon/kms: get lvds info for DIG LVTMA and UNIPHY encoders
Noticed by Rafał Miłecki on dri-devel.  On r6xx/r7xx hardware, laptop
panels can be driven by KLDSCP_LVTMA or UNIPHY.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:13 +10:00
Alex Deucher
848577ee27 drm/radeon/kms: fix quirk for MSI laptop
The line mux for the connector in the bios tables
is used for enumerating drm connectors.  Since
this laptop has a quirk where the same line much is
listed for both VGA and LVDS, the connectors get
combined.  Setting the line mux on LVDS to an unused
value prevents both encoders from being combined into
the same connector.  This should fix bko bug 13720.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:11 +10:00
Thomas Hellstrom
ae3e8122cb ttm: Fix caching mode selection.
A bug caused a new caching state to be selected on each buffer object
validation regardless of the current caching state.
Moreover, a caching state could be selected that wasn't supported by
the memory type.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:10 +10:00
Thomas Hellstrom
d1724078d6 ttm: Make messages more readable.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:09 +10:00
Dave Airlie
531369e626 drm/radeon: fix support for vline relocations.
Userspace sends us a special relocation type to sync video/exa
to vlines to avoid tearing, this deals with the relocation
in the kernel, it picks the correct crtc and avoids issues
where crtcs are disabled.

This version also parses the wait until to make sure it isn't
trying to do anything evil.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:08 +10:00
Dave Airlie
3e43d82125 drm/radeon/kms: respect TOM on rs100->rs480 IGP variants.
Normally we are free to place VRAM where we want in the GPUs
memory address space, however on IGP chips the VRAM is actual RAM,
and no special translation or aperture is used inside the GPU MC.

So when you move the VRAM aperture away from the TOM register,
you actually move it into main memory and can trash things quite badly.

This commit makes the code respect the TOM location for MC_FB_LOCATION.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:07 +10:00
Dave Airlie
4162338a1d drm/radeon/kms: set crtc and cursor offsets correctly on legacy chips.
The crtc and cursor offsets on the legacy chips are offset from
DISPLAY_BASE_ADDR. The code worked if display base addr was at 0,
but otherwise falls to pieces.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:06 +10:00
Dave Airlie
6cdf65855c drm/radeon/kms: remove IB flushing trick.
If there is a problem then this is hiding it, we shouldn't
ever need to flush the IB. Either the buffers are:

WB - caching just works.
WC - no need to do explicit flush, the MB + readback will do it

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:04 +10:00
Dave Airlie
4c9bc75cbc drm/radeon/kms: mmio base/size should be resource_size_t.
Unsigned long is incorrect for 64-bit resources on 32-bit hw.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:03 +10:00
Dave Airlie
ed10f95d60 drm/radeon/kms: fix some GART table entry bugs.
1. rv370 can accept 40-bit addresses - also at 24-bit shift not 4 bits
2. rs480 table can be in 40-bit space. - 4 bit shift for top 8 bits
3. rs480 table entries can be in 40-bit space.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:02 +10:00
Herbert Xu
305f9db22d crypto: crypto4xx - Disable SHA implementation
The crypto4xx SHA implementation keeps the hash state in the tfm
data structure.  This breaks a fundamental requirement of ahash
implementations that they must be reentrant.

This patch disables the broken implementation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-07-15 15:11:08 +08:00
Julia Lawall
ecca068323 drm: Move a dereference below a NULL test
If the NULL test is necessary, then the dereference should be moved below
the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:56:48 +10:00
Zhao Yakui
5c61259e6c drm/mode: get the modeline for standard timing in EDID by using CVT/GTF
Create the standard timing modeline by using CVT/GFT algorithm while
interpreting the EDID.

In course of interpreting the EDID, the timing level will be obtained,
which is used to determine whether the CVT/GTF algorithm is selected to
generate the modeline for the given hdisplay/vdisplay/vrefresh_rate.
In the UMS mode firstly it will check whether it can be found in
the DMT table. If it can be found, then the modeline is returned. Then the
timing_level is used to choose CVT/GTF.
As there is no DMT table, no modeline is returned when timing level
is DMT. For the other two timing levels, the CVT/GTF will be called to
generate the required standard timing modeline.

[airlied: fixed up conflicts since EDID rework]

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:52:02 +10:00
Zhao Yakui
26bbdadad3 drm/mode: add the GTF algorithm in kernel space
Add the GTF algorithm in kernel space. And this function can be called to
generate the required modeline.

I copied it from the file of xserver/hw/xfree86/modes/xf86gtf.c. What I have
done is to translate it by using integer calculation. This is to avoid
the float-point calculation in kernel space.
At the same tie I also refer to the function of fb_get_mode in
drivers/video/fbmon.c

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:31:43 +10:00
Zhao Yakui
d782c3f95c drm/mode: add the CVT algorithm in kernel space
Add the CVT algorithm in kernel space. And this function can be called to
generate the required modeline.

I copied it from the file of xserver/hw/xfree86/modes/xf86cvt.c. What I have
done is to translate it by using integer calculation. This is to avoid
the float-point calculation in kernel space.

[airlied:- cleaned up some bits]
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:29:33 +10:00
Jesse Barnes
ba0ab82358 fb/intelfb: conflict with DRM_I915 and hide by default
Users get confused by this driver.  It's really a special purpose
embedded driver, and causes a lot of problems if enabled.  So hide it
under EMBEDDED by default, and make sure it doesn't get enabled with
the i915 DRM driver.

Dave, I'm hoping you can feed this to Linus through your tree.  It's
appropriate for 2.6.31 I think.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:01:55 +10:00
Roel Kluin
916635bfca drm/ttm: fix misplaced parentheses
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:00:37 +10:00
Simon Farnsworth
42dd861994 drm/via: Fix vblank IRQ on VIA hardware.
via_enable_vblank wasn't setting the VBlank enable bit - instead, it
was masking out the rest of the register.

At the same time, fix via_disable_vblank to clear the VBlank enable
bit.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:00:07 +10:00
Jiri Slaby
845792d940 drm: drm_gem, check kzalloc retval
Check kzalloc retval against NULL in drm_gem_object_alloc and bail out
appropriately.

While at it merge the fail paths and jump to them by gotos at the end
of the function.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 15:56:12 +10:00