Commit graph

168,951 commits

Author SHA1 Message Date
Chris Mason
8c594ea81d Btrfs: use the right node in reada_for_balance
reada_for_balance was using the wrong index into the path node array,
so it wasn't reading the right blocks.  We never directly used the
results of the read done by this function because the btree search is
started over at the end.

This fixes reada_for_balance to reada in the correct node and to
avoid searching past the last slot in the node.  It also makes sure to
hold the parent lock while we are finding the nodes to read.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:09 -04:00
Chris Mason
11c8349b4e Btrfs: fix oops on page->mapping->host during writepage
The extent_io writepage call updates the writepage index in the inode
as it makes progress.  But, it was doing the update after unlocking the page,
which isn't legal because page->mapping can't be trusted once the page
is unlocked.

This lead to an oops, especially common with compression turned on.  The
fix here is to update the writeback index before unlocking the page.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:09 -04:00
Chris Mason
d313d7a31a Btrfs: add a priority queue to the async thread helpers
Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a
higher priority.  But, the checksumming helper threads prevent it
from being fully effective.

There are two problems.  First, a big queue of pending checksumming
will delay the synchronous IO behind other lower priority writes.  Second,
the checksumming uses an ordered async work queue.  The ordering makes sure
that IOs are sent to the block layer in the same order they are sent
to the checksumming threads.  Usually this gives us less seeky IO.

But, when we start mixing IO priorities, the lower priority IO can delay
the higher priority IO.

This patch solves both problems by adding a high priority list to the async
helper threads, and a new btrfs_set_work_high_prio(), which is used
to make put a new async work item onto the higher priority list.

The ordering is still done on high priority IO, but all of the high
priority bios are ordered separately from the low priority bios.  This
ordering is purely an IO optimization, it is not involved in data
or metadata integrity.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:08 -04:00
Chris Mason
ffbd517d5a Btrfs: use WRITE_SYNC for synchronous writes
Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for
writes we plan on waiting on in the near future.  This patch
mirrors recent changes in other filesystems and the generic code to
use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for
other latency critical writes.

Btrfs uses async worker threads for checksumming before the write is done,
and then again to actually submit the bios.  The bio submission code just
runs a per-device list of bios that need to be sent down the pipe.

This list is split into low priority and high priority lists so the
WRITE_SYNC IO happens first.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:08 -04:00
Steve French
ff6945279d [CIFS] Make cifs_unlink consistent in checks for null inode
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-04-20 19:45:13 +00:00
Linus Torvalds
608faf1ff2 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix allmodconfig compilation breakage.
  [IA64] smp_flush_tlb_mm() should only send IPI's to cpus in cpu_vm_mask
  [IA64] export smp_send_reschedule
2009-04-20 12:34:36 -07:00
Peter Zijlstra
ff743345bf sched: remove extra call overhead for schedule()
Lai Jiangshan's patch reminded me that I promised Nick to remove
that extra call overhead in schedule().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090313112300.927414207@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 20:49:53 +02:00
Ingo Molnar
f1f9b3b179 perfcounters, sched: remove __task_delta_exec()
This function was left orphan by the latest round of sw-counter
cleanups.

[ Impact: remove unused kernel function ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 20:38:21 +02:00
Ilpo Järvinen
6d25b688ec powerpc: Fix of_node_put() exit path in of_irq_map_one()
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-20 12:18:43 -06:00
Grant Likely
8db70d3dee powerpc/5200: defconfig updates
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-20 11:33:12 -06:00
Steven Rostedt
e395898e98 tracing: remove recursive test from ring_buffer_event_discard
The ring_buffer_event_discard is not tied to ring_buffer_lock_reserve.
It can be called inside or outside the reserve/commit. Even if it
is called inside the reserve/commit the commit part must also be called.

Only ring_buffer_discard_commit can be used as a replacement for
ring_buffer_unlock_commit.

This patch removes the trace_recursive_unlock from ring_buffer_event_discard
since it would be the wrong place to do so.

[Impact: prevent breakage in trace recursive testing ]

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-20 13:32:44 -04:00
Steven Rostedt
17487bfeb6 tracing: fix recursive test level calculation
The recursive tests to detect same level recursion in the ring buffers
did not account for the hard/softirq_counts to be shifted. Thus the
numbers could be larger than then mask to be tested.

This patch includes the shift for the calculation of the irq depth.

[ Impact: stop false positives in trace recursion detection ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-20 13:24:21 -04:00
Mark Brown
b75576d76d ASoC: Make the DAPM power check an operation on the widget
Rather than having switch statements at point of use make the DAPM
power check a member of the widget structure and set it when we
instantiate the widget.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-20 18:09:48 +01:00
Mark Brown
6ea31b9f0a ASoC: Factor out DAPM power checks for DACs and ADCs
This also switches us to using a switch statement for the widget type
in dapm_power_widget().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-20 18:09:41 +01:00
Mark Brown
cd0f2d4736 ASoC: Factor out generic widget power checks
This will form a basis for further power check refactoring: the overall
goal of these changes is to allow us to check power separately to
applying it, allowing improvements in the power sequencing algorithms.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-20 18:09:33 +01:00
Steven Rostedt
23de29de2d tracing: remove dangling semicolon
Due to a cut and paste error, the trace_seq_putc had a semicolon
after the prototype but before the stub function when tracing is
disabled.

[Impact: fix compile error ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-20 12:59:29 -04:00
Isaku Yamahata
05f0ecbda5 [IA64] fix allmodconfig compilation breakage.
This patch fixes the following compilation error caused by recursive
inclusion of kernel.h which defines BUILD_BUG_ON().
In this case, the case it catches will be caught by the case
CONFIG_PARAVIRT=n, so removing it would not hurt compile time check
very much. So fix the breakage by removing it.

  CC      arch/ia64/kernel/asm-offsets.s
In file included from include/linux/bitops.h:17,
                 from include/linux/kernel.h:15,
                 from include/linux/sched.h:52,
                 from arch/ia64/kernel/asm-offsets.c:9:
arch/ia64/include/asm/bitops.h: In function 'set_bit':
arch/ia64/include/asm/bitops.h:47: error: implicit declaration of function 'BUILD_BUG_ON'

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-04-20 09:46:29 -07:00
Steven Rostedt
28d20e2d6e tracing/events: call the correct event trace selftest init function
The late_initcall calls a helper function instead of the proper
init event selftest function.

This update may have been lost due to conflicting merges.

[ Impact: fix compiler warning and call extended event trace self tests ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-20 12:12:44 -04:00
Jack Steiner
fc61e6636d x86/uv: fix for no memory at paddr 0
Fix endcase where the memory at physical address 0 does not really
exist AND one of the sockets on blade 0 has no active cpus.

The memory that _appears_ to be at physical address 0 is actually
memory that located at a different address but has been remapped by
the chipset so that it appears to be at physical address 0.

When determining the UV pnode, the algorithm for determining the pnode
incorrectly used the relocated physical address instead of the actual
(global) address.

[ Impact: boot failure on partitioned systems ]

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090420132530.GA23156@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 18:09:18 +02:00
Ingo Molnar
62d1702909 Merge branch 'linus' into x86/urgent
Merge reason: We need the x86/uv updates from upstream, to queue up
              dependent fix.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 18:08:12 +02:00
Steven Rostedt
a7abe97fd8 tracing: rename EVENT_TRACER config to ENABLE_EVENT_TRACING
Currently we have two configs: EVENT_TRACING and EVENT_TRACER.
All tracers enable EVENT_TRACING. The EVENT_TRACER is only a
convenience to enable the EVENT_TRACING when no other tracers
are enabled.

The names EVENT_TRACER and EVENT_TRACING are too similar and confusing.
This patch renames EVENT_TRACER to ENABLE_EVENT_TRACING to be more
appropriate to what it actually does, as well as add a comment in
the help menu to explain the option's purpose.

[ Impact: rename config option to reduce confusion ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-20 17:55:35 +02:00
Linus Torvalds
a939b96ccc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM/Suspend: Introduce two new platform callbacks to avoid breakage
2009-04-20 08:43:06 -07:00
Linus Torvalds
5cab3856e7 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  agp: zero pages before sending to userspace
  drm: check for minor master before allowing drop master.
  drm: set/clear is_master when master changed
  drm: clean dirty memory after device release
  drm: count reaches -1
2009-04-20 08:42:48 -07:00
Linus Torvalds
2edbdd1266 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: support bitmaps on RAID10 arrays larger then 2 terabytes
  md: update sync_completed and reshape_position even more often.
  md: improve usefulness and accuracy of sysfs file md/sync_completed.
  md: allow setting newly added device to 'in_sync' via sysfs.
  md: tiny md.h cleanups
2009-04-20 08:37:37 -07:00
Ingo Molnar
125e702b09 perf_counter tools: fix 'make install'
Remove Git leftovers from this area.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:49 +02:00
Ingo Molnar
6142fdd968 perf_counter tools: add 'perf help'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:49 +02:00
Ingo Molnar
cc13a59137 perf_counter tools: fix --version
Hook up the 'perf version' built-in command.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:49 +02:00
Ingo Molnar
e33e0a4373 perf_counter tools: add 'perf record' command
Move perf-record.c into the perf suite of commands.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:49 +02:00
Ingo Molnar
1d8c8b209e perf_counter tools: add help texts
Add Documentation/perf-stat.txt and Documentation/perf-top.txt.

The template that was used for it: Documentation/git-add.txt from Git.

Fix up small bugs to make these help texts show up both in the 'perf'
common-command summary output screen, and on the individual help screens.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:49 +02:00
Ingo Molnar
ddcacfa0fe perf_counter tools: separate kerneltop into 'perf top' and 'perf stat'
Lets use the Git framework of built-in commands.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:48 +02:00
Ingo Molnar
6f06ccbc86 perf_counter tools: clean up after introduction of the Git command framework
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:48 +02:00
Ingo Molnar
0780060124 perf_counter tools: add in basic glue from Git
First very raw version at having a central 'perf' command and
a list of subcommands:

  perf top
  perf stat
  perf record
  perf report
  ...

This is done by picking up Git's collection of utility functions,
and hacking them to build fine in this new environment.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:48 +02:00
Ingo Molnar
d24e473e5b perf_counter: copy in Git's top Makefile
We'd like to have a similar user-space structure as Git has, for the
perfcounter tools - so copy in Git's toplevel makefile as-is.

We'll strip it down in subsequent commits to make it fit the
perfcounters code.

The Git version used: 66996ec: Sync with 1.6.2.4

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-20 17:36:48 +02:00
David Howells
a5432f5ad4 FS-Cache: Add MAINTAINERS record for FS-Cache and CacheFiles
Add MAINTAINERS record for FS-Cache and CacheFiles.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-20 08:12:59 -07:00
David Howells
f297bfee71 FRV: Don't attempt to #include <linux/blk.h> as it doesn't exist
Stop the FRV arch from attempting to #include <linux/blk.h> as it doesn't
exist.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-20 08:12:59 -07:00
Kay Sievers
8a577ffc75 driver: dont update dev_name via device_add path
notice one system /proc/iomem some entries missed the name for pci_devices

it turns that dev->dev.kobj name is changed after device_add.

for pci code: via acpi_pci_root_driver.ops.add (aka acpi_pci_root_add)
==> pci_acpi_scan_root is used to scan pci bus/device, and at the same
time we read the resource for pci_dev in the pci_read_bases, we have
res->name = pci_name(pci_dev); pci_name is calling dev_name.

later via acpi_pci_root_driver.ops.start (aka acpi_pci_root_start) ==>
pci_bus_add_device to add all pci_dev in kobj tree.  pci_bus_add_device
will call device_add.

actually in device_add

        /* first, register with generic layer. */
        error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev));
        if (error)
                goto Error;

will get one new name for that kobj, old name is freed.

[Impact: fix corrupted names in /proc/iomem ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-20 08:12:58 -07:00
hummerbliss@gmail.com
c197facc8e netfilter: bridge: allow fragmentation of VLAN packets traversing a bridge
br_nf_dev_queue_xmit only checks for ETH_P_IP packets for fragmenting but not
VLAN packets. This results in dropping of large VLAN packets. This can be
observed when connection tracking is enabled. Connection tracking re-assembles
fragmented packets, and these have to re-fragmented when transmitting out. Also,
make sure only refragmented packets are defragmented as per suggestion from
Patrick McHardy.

Signed-off-by: Saikiran Madugula <hummerbliss@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-04-20 17:12:35 +02:00
Steven Rostedt
4ed9f0716e tracing: create menuconfig for tracing infrastructure
During testing we often use randconfig to test various kernels.
The current configuration set up does not give an easy way to disable
all tracing with a single config. The case where randconfig would
test all tracing disabled is very unlikely.

This patch adds a config option to enable or disable all tracing.
It is hooked into the tracing menu just like other submenus are done.

[ Impact: allow randconfig to easily produce all traces disabled ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-20 11:07:49 -04:00
Steven Rostedt
9ae5b87900 tracing: change branch profiling to a choice selection
This patch makes the branch profiling into a choice selection:

  None               - no branch profiling
  likely/unlikely    - only profile likely/unlikely branches
  all                - profile all branches

The all profiler will also enable the likely/unlikely branches.

This does not change the way the profiler works or the dependencies
between the profilers.

What this patch does, is keep the branch profiling from being selected
by an allyesconfig make. The branch profiler is very intrusive and
it is known to break various architecture builds when selected as an
allyesconfig.

[ Impact: prevent branch profiler from being selected in allyesconfig ]

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-20 11:07:48 -04:00
Steven Whitehouse
e56985da45 GFS2: Fix page_mkwrite() return code
This allows for the possibility of returning VM_FAULT_OOM as
well as VM_FAULT_SIGBUS. This ensures that the correct action
is taken.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-04-20 16:02:02 +01:00
Russell King
64bd43a086 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-04-20 14:03:04 +01:00
David Brownell
4a014a240b [ARM] 5457/1: mach-imx gpio buildfix
From: David Brownell <dbrownell@users.sourceforge.net>

Fix GPIO-related build error on mach-imx platform:

  CC      drivers/spi/spi_gpio.o
In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5,
                 from include/linux/gpio.h:7,
                 from drivers/spi/spi_gpio.c:23:
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value':
arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2'
arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once
arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.)
arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline':
arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function)
arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment
arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment
	...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-20 14:01:40 +01:00
Mikael Pettersson
eb8f3142fa [ARM] 5456/1: add sys_preadv and sys_pwritev
Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs
but not ARM, resulting in

<stdin>:1421:2: warning: #warning syscall preadv not implemented
<stdin>:1425:2: warning: #warning syscall pwritev not implemented

This patch adds sys_preadv and sys_pwritev to ARM.

These syscalls simply take five long-sized parameters, so they
should have no calling-convention/ABI issues in the kernel.

Tested on armv5tel eabi using a preadv/pwritev test program posted
on linuxppc-dev earlier this month.

It would be nice to get this into the kernel before 2.6.30 final,
so that glibc's kernel version feature test for these syscalls
doesn't have to special-case ARM.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-20 14:01:39 +01:00
Paul Mundt
cf242007a1 sh: pci: Rename pci-new.c to pci.c.
pci-new.c is now in a state to replace the old pci.c, rename it
accordingly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:53:33 +09:00
Paul Mundt
35bcfffd86 sh: pci: Roll pci-lib in to pci-new.
Now that the pci-auto cruft is gone, pci-lib can go away.
Roll it back in to pci-new.c where it originally split off from.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:51:19 +09:00
Paul Mundt
805fcc8899 sh: pci: Kill off the last remnants of the now unused pci-auto code.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:46:42 +09:00
Paul Mundt
2d5efc190e sh: pci: Move the se7751 fixups in to arch/sh/drivers/pci/.
The se7751 was still doing the PCI fixups in its own board directory,
so we move it over to arch/sh/drivers/pci/ with the rest of the board
fixups. It has bitrotted significantly over the years, so will still
likely need a bit of work to bring back up to date.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:42:59 +09:00
Paul Mundt
951a681bda sh: pci: Convert dreamcast to new-style interface.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:34:36 +09:00
Paul Mundt
37c8ac361e sh: pci: Consolidate lboxre2 and r2d IRQ fixups.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:27:15 +09:00
Paul Mundt
84972ec0c2 sh: pci: Rename SH7751 platform ops files to fixups.
None of these contain pci_ops, only IRQ routing bits, rename them
accordingly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 21:17:10 +09:00