Add device tree support for the mxc rtc driver.
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds documentation of device tree bindings for the
mxc rtc.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mxc RTC needs two clocks, one for the input
reference, and one for the IP. But this driver
was only using one clock (for the reference).
This patch add the second clock (for the IP).
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx35 don't define clocks for rtc.
This patch add two clocks, as needed
by the mxc rtc driver.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mxc rtc driver needs two clock.
It was defined only one clock, so we
define the second clock.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reported by Intel's kbuild robot.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
When the size of dma_addr_t was 32 bits, the compiler warned
about the size of the 32 bit shift being larger than the size
of the data type.
Reported by Intel's kbuild robot.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
We're giving up all attempts to keep cpu- and device byte ordering separate.
This silences sparse when compiled using
make C=2 CF="-D__CHECK_ENDIAN__"
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
The preferred mode typically didn't end up first, since the function
drm_mode_connector_list_update() reordered the modes.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
With screen targets the old legacy display system fbdev doesn't work
satisfactory anymore. At best the resolution is severely restricted.
Therefore implement fbdev on top of the kms system. With this change, fbdev
will be using whatever KMS backend is chosen.
There are helpers available for this, so in the future we'd probably want
to implement the helper callbacks instead of calling into our KMS
implementation directly.
v2: Make sure we take the mode_config mutex around modesetting,
Also clear the initial framebuffer using vzalloc instead of vmalloc.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
The kernel interface is needed for fbdev, and needs to be free from
a file_priv member. To accomplish this, remove the fb surface mutex
and list which isn't used anymore, anyway.
Finally, make the pin() and unpin() pin the framebuffer for all display
system backends, so that fbdev can pin its framebuffer before mapping it.
v2: Address review comments:
- Fix vmw_framebuffer_unpin() to handle also the surface framebuffer case.
- Fix vmw_kms_new_framebuffer() to actually use the only_2d parameter.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
If the command buffer pool is out of space, the code waits until space is
available. However since the condition code tries to allocate a range manager
node while !TASK_RUNNING we get a kernel warning.
Avoid this by pre-allocating the mm node. This will also probably be more
efficient.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Also implements the missing readback function and
fixes page flip in case of no event.
v2:
- Adapt to the work done for screen targets for 2d, in particular
Handle proxy surface updates.
- Remove execbuf quirks since we now use fifo reserve / commit.
- Revert the initial placement of vmw dma buffers.
v3: Address review comments.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
This makes it possible to use the same function for surface dirty and
present. Also fixes page flip without events.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
We need to make the dirty- and readback functions callable without a struct
drm_file pointer. We also need to unify the handling of dirty- and readback
cliprects that are now implemented in various places across the kms system,
som add helpers to facilitate this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
This patch address the following underlying issues with SurfaceDMA
* SurfaceDMA command does not work in a 2D VM, but we can wrap a
proxy surface around the same DMA buffer and use the SurfaceCopy
command which does work in a 2D VM.
* Wrapping a DMA buffer with a proxy surface also gives us an
added optimization path for the case when the DMA buf
dimensions match the mode. In this case, the DMA buf can
be pinned as the display surface, saving an extra copy.
This only works in a 2D VM because we won't be doing any
rendering operations directly to the display surface.
v2
* Moved is_dmabuf_proxy field to vmw_framebuffer_surface
* Undone coding style changes
* Addressed other issues from review
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Add support for the screen target device interface.
Add a getparam parameter and bump minor to signal availability.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
For certain surface copies, we don't have a user space handle for
the destination surface. In such cases, we are going to trust that
our caller is giving us the right surface ID.
To do this case, we created a quirk flag that may be useful
in the future for handling other cases.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Refactored vmw_gb_surface_define_ioctl() and made the surface
definition part a separate function. This way other parts of vmwgfx
can use it to allocate kernel-visible GB surfaces.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
For screen targets it appears we need to pin surfaces while they are bound
as screen targets, so add a small interface to do that.
v2: Always increase pin_count on pin.
v3: Add missing reservation sem.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Fix a circular locking dependency between
struct vmw_overlay::mutex and
struct vmw_private::reservation_sem
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Add command buffer support.
Currently we don't implement preemption or fancy error handling.
Tested with a couple of mesa-demos, compiz/unity and viewperf maya-03.
v2:
- Synchronize with pending work at command buffer manager takedown.
- Add an interface to flush the current command buffer for latency-critical
command batches and apply it to framebuffer dirtying.
v3:
- Minor fixes of definitions and typos to address reviews.
- Removed new or moved branch predictor hints.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
This commit reworks device initialization so that we always enable the
FIFO at driver load, deferring SVGA enable until either first modeset
or fbdev enable.
This should always leave the fifo properly enabled for render- and
control nodes.
In addition,
*) We disable the use of VRAM when SVGA is not enabled.
*) We simplify PM support so that we only throw out resources on hibernate,
not on suspend, since the device keeps its state on suspend.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
A regression introduced when the master ttm lock was split into two.
Reported-and-tested-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
If the ASN.1 decoder is asked to parse a sequence of objects, non-optional
matches get skipped if there's no more data to be had rather than a
data-overrun error being reported.
This is due to the code segment that decides whether to skip optional
matches (ie. matches that could get ignored because an element is marked
OPTIONAL in the grammar) due to a lack of data also skips non-optional
elements if the data pointer has reached the end of the buffer.
This can be tested with the data decoder for the new RSA akcipher algorithm
that takes three non-optional integers. Currently, it skips the last
integer if there is insufficient data.
Without the fix, #defining DEBUG in asn1_decoder.c will show something
like:
next_op: pc=0/13 dp=0/270 C=0 J=0
- match? 30 30 00
- TAG: 30 266 CONS
next_op: pc=2/13 dp=4/270 C=1 J=0
- match? 02 02 00
- TAG: 02 257
- LEAF: 257
next_op: pc=5/13 dp=265/270 C=1 J=0
- match? 02 02 00
- TAG: 02 3
- LEAF: 3
next_op: pc=8/13 dp=270/270 C=1 J=0
next_op: pc=11/13 dp=270/270 C=1 J=0
- end cons t=4 dp=270 l=270/270
The next_op line for pc=8/13 should be followed by a match line.
This is not exploitable for X.509 certificates by means of shortening the
message and fixing up the ASN.1 CONS tags because:
(1) The relevant records being built up are cleared before use.
(2) If the message is shortened sufficiently to remove the public key, the
ASN.1 parse of the RSA key will fail quickly due to a lack of data.
(3) Extracted signature data is either turned into MPIs (which cope with a
0 length) or is simpler integers specifying algoritms and suchlike
(which can validly be 0); and
(4) The AKID and SKID extensions are optional and their removal is handled
without risking passing a NULL to asymmetric_key_generate_id().
(5) If the certificate is truncated sufficiently to remove the subject,
issuer or serialNumber then the ASN.1 decoder will fail with a 'Cons
stack underflow' return.
This is not exploitable for PKCS#7 messages by means of removal of elements
from such a message from the tail end of a sequence:
(1) Any shortened X.509 certs embedded in the PKCS#7 message are survivable
as detailed above.
(2) The message digest content isn't used if it shows a NULL pointer,
similarly, the authattrs aren't used if that shows a NULL pointer.
(3) A missing signature results in a NULL MPI - which the MPI routines deal
with.
(4) If data is NULL, it is expected that the message has detached content and
that is handled appropriately.
(5) If the serialNumber is excised, the unconditional action associated
with it will pick up the containing SEQUENCE instead, so no NULL
pointer will be seen here.
If both the issuer and the serialNumber are excised, the ASN.1 decode
will fail with an 'Unexpected tag' return.
In either case, there's no way to get to asymmetric_key_generate_id()
with a NULL pointer.
(6) Other fields are decoded to simple integers. Shortening the message
to omit an algorithm ID field will cause checks on this to fail early
in the verification process.
This can also be tested by snipping objects off of the end of the ASN.1 stream
such that mandatory tags are removed - or even from the end of internal
SEQUENCEs. If any mandatory tag is missing, the error EBADMSG *should* be
produced. Without this patch ERANGE or ENOPKG might be produced or the parse
may apparently succeed, perhaps with ENOKEY or EKEYREJECTED being produced
later, depending on what gets snipped.
Just snipping off the final BIT_STRING or OCTET_STRING from either sample
should be a start since both are mandatory and neither will cause an EBADMSG
without the patches
Reported-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
In an ASN.1 description where there is a CHOICE construct that contains
elements with IMPLICIT tags that refer to constructed types, actions to be
taken on those elements should be conditional on the corresponding element
actually being matched. Currently, however, such actions are performed
unconditionally in the middle of processing the CHOICE.
For example, look at elements 'b' and 'e' here:
A ::= SEQUENCE {
CHOICE {
b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }),
c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }),
d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }),
e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }),
f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f })
}
} ({ do_XXXXXXXXXXXX_A })
B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid })
C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int })
They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that
should only be processed if that element is matched.
The problem is that there's no easy place to hang the action off in the
subclause (type B for element 'b' and type C for element 'e') because
subclause opcode sequences can be shared.
To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that
the decoder only processes if the preceding match was successful. This can
be seen in an excerpt from the output of the fixed ASN.1 compiler for the
above ASN.1 description:
[ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e
[ 14] = _tagn(CONT, CONS, 3),
[ 15] = _jump_target(45), // --> C
[ 16] = ASN1_OP_MAYBE_ACT,
[ 17] = _action(ACT_do_XXXXXXXXXXXX_e),
In this, if the op at [13] is matched (ie. element 'e' above) then the
action at [16] will be performed. However, if the op at [13] doesn't match
or is skipped because it is conditional and some previous op matched, then
the action at [16] will be ignored.
Note that to make this work in the decoder, the ASN1_OP_RETURN op must set
the flag to indicate that a match happened. This is necessary because the
_jump_target() seen above introduces a subclause (in this case an object of
type 'C') which is likely to alter the flag. Setting the flag here is okay
because to process a subclause, a match must have happened and caused a
jump.
This cannot be tested with the code as it stands, but rather affects future
code.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Fix the handling of CHOICE types in the ASN.1 compiler to make SEQUENCE and
SET elements in a CHOICE be correctly rendered as skippable and conditional
as appropriate.
For example, in the following ASN.1:
Foo ::= SEQUENCE { w1 INTEGER, w2 Bar, w3 OBJECT IDENTIFIER }
Bar ::= CHOICE {
x1 Seq1,
x2 [0] IMPLICIT OCTET STRING,
x3 Seq2,
x4 SET OF INTEGER
}
Seq1 ::= SEQUENCE { y1 INTEGER, y2 INTEGER, y3 INTEGER }
Seq2 ::= SEQUENCE { z1 BOOLEAN, z2 BOOLEAN, z3 BOOLEAN }
the output in foo.c generated by:
./scripts/asn1_compiler foo.asn1 foo.c foo.h
included:
// Bar
// Seq1
[ 4] = ASN1_OP_MATCH,
[ 5] = _tag(UNIV, CONS, SEQ),
...
[ 13] = ASN1_OP_COND_MATCH_OR_SKIP, // x2
[ 14] = _tagn(CONT, PRIM, 0),
// Seq2
[ 15] = ASN1_OP_MATCH,
[ 16] = _tag(UNIV, CONS, SEQ),
...
[ 24] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // x4
[ 25] = _tag(UNIV, CONS, SET),
...
[ 27] = ASN1_OP_COND_FAIL,
as a result of the CHOICE - but this is wrong on lines 4 and 15 because
both of these should be skippable (one and only one of the four can be
picked) and the one on line 15 should also be conditional so that it is
ignored if anything before it matches.
After the patch, it looks like:
// Bar
// Seq1
[ 4] = ASN1_OP_MATCH_JUMP_OR_SKIP, // x1
[ 5] = _tag(UNIV, CONS, SEQ),
...
[ 7] = ASN1_OP_COND_MATCH_OR_SKIP, // x2
[ 8] = _tagn(CONT, PRIM, 0),
// Seq2
[ 9] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // x3
[ 10] = _tag(UNIV, CONS, SEQ),
...
[ 12] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // x4
[ 13] = _tag(UNIV, CONS, SET),
...
[ 15] = ASN1_OP_COND_FAIL,
where all four options are skippable and the second, third and fourth are
all conditional, as is the backstop at the end.
This hasn't been a problem so far because in the ASN.1 specs we have are
either using primitives or are using SET OF and SEQUENCE OF which are
handled correctly.
Whilst we're at it, also make sure that element labels get included in
comments in the output for elements that have complex types.
This cannot be tested with the code as it stands, but rather affects future
code.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-By: David Woodhouse <David.Woodhouse@intel.com>
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add eMMC pinmux and mmc2 related bits. We keep the mmc2
controller disabled as it conflits with gpmc/NAND.
To enable emmc, simply set mmc2 controller node to "okay"
and set the gpmc node to "disabled" and change the
SelEMMCorNAND gpio-hog to output-high.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
On this board either eMMC or NAND can work based on the level of
spi2_cs0.gpio0_23. Add a gpio-hog to enable configuration of this
pin in the device tree.
Move pinmux for spi2_cs0 (SEL_eMMCorNANDn) out of
NAND node into gpio0 so it is initialized with gpio0.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some pins on AM43XX support MODE9 for the pinctrl settings so add a
binding to describe this.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ldo1_reg in addition to being connected to the io lines is also
connected to the card detect line. On card removal, omap_hsmmc
driver does a regulator_disable causing card detect line to be
pulled down. This raises a card insertion interrupt and once the
MMC core detects there is no card inserted, it does a
regulator disable which again raises a card insertion interrupt.
This happens in a loop causing infinite MMC interrupts.
Fix it by making ldo1_reg as always_on.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ldo1_reg in addition to being connected to the io lines is also
connected to the card detect line. On card removal, omap_hsmmc
driver does a regulator_disable causing card detect line to be
pulled down. This raises a card insertion interrupt and once the
MMC core detects there is no card inserted, it does a
regulator disable which again raises a card insertion interrupt.
This happens in a loop causing infinite MMC interrupts.
Fix it by making ldo1_reg as always_on.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
pbias-supply is initialized in dra7.dtsi. Remove redundant initialization
of pbias-supply from MMC1 dt node in am57xx-beagle-x15.dts
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
SDMMC Card Detect can be used over default GPIO map.
Reported-by: Yan Liu <yan-liu@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
MMC1 supports SDR104 and MMC2 supports HS200 both of which requires
192MHz clock. Set the maximum operating clock frequency to 192 MHz.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add a node for evm_3v3_sd using onboard pcf GPIO expander which feeds
on to mmc vdd.
Update mapping for vmmc-supply and vmmc_aux-supply.
evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines.
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add a node for evm_3v3_sd using pcf which feeds on to mmc vdd.
Update mapping for vmmc-supply and vmmc_aux-supply.
evm_3v3_sd supplies to SD card vdd, and ldo1 to sdcard i/o lines.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The logic used to check ept misconfig is completely contained in common
reserved bits check for sptes, so it can be removed
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The #PF with PFEC.RSV = 1 is designed to speed MMIO emulation, however,
it is possible that the RSV #PF is caused by real BUG by mis-configure
shadow page table entries
This patch enables full check for the zero bits on shadow page table
entries (which includes not only bits reserved by the hardware, but also
bits that will never be set in the SPTE), then dump the shadow page table
hierarchy.
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have the same data struct to check reserved bits on guest page tables
and shadow page tables, split is_rsvd_bits_set() so that the logic can be
shared between these two paths
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have abstracted the data struct and functions which are used to check
reserved bit on guest page tables, now we extend the logic to check
zero bits on shadow page tables
The zero bits on sptes include not only reserved bits on hardware but also
the bits that SPTEs willnever use. For example, shadow pages will never
use GB pages unless the guest uses them too.
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since shadow ept page tables and Intel nested guest page tables have the
same format, split reset_rsvds_bits_mask_ept so that the logic can be
reused by later patches which check zero bits on sptes
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since softmmu & AMD nested shadow page tables and guest page tables have
the same format, split reset_rsvds_bits_mask so that the logic can be
reused by later patches which check zero bits on sptes
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
