The CRC (Crystal Cove) PMIC, controls the panel enable and disable
signals for BYT for dsi panels. This is indicated in the VBT fields. Use
that to initialize and use GPIO based control for these signals.
v2: Use the newer gpiod interface(Alexandre)
v3: Remove the redundant checks and unused code (Ville)
v4: Moved PWM vs SoC backlight #defines to intel_bios.h (Jani)
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Crystalcove PMIC provides three PWM signals and this driver exports
one of them on the BYT platform which is used to control backlight for
DSI panel. This is platform device implementation of the drivers/mfd
cell device for CRC PMIC.
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On some BYT PLatform the PWM is controlled using CRC PMIC. Add a lookup
entry for the same to be used by the consumer (Intel GFX)
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Needed for PWM control suuported by the PMIC
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On some Intel SoC platforms, the panel enable/disable signals are
controlled by CRC PMIC. Add those control as a new GPIO in a lookup
table for gpio-crystalcove chip during CRC driver load
CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In case we unload and load a driver module again that is registering a
lookup table, without this it will result in multiple entries. Provide
an option to remove the lookup table on driver unload
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cookie ACK is always received by the association initiator, so fix the
comment to avoid confusion.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner says:
====================
sctp: fix src address selection if using secondary address
This series improves the way SCTP chooses its src address so that the
choosen one will always belong to the interface being used for output.
v1->v2:
- split out the refactoring from the fix itself
- Doing a full reverse routing as in v1 is not necessary. Only looking
for the interface that has the address and comparing its number is
enough.
====================
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In short, sctp is likely to incorrectly choose src address if socket is
bound to secondary addresses. This patch fixes it by adding a new check
that checks if such src address belongs to the interface that routing
identified as output.
This is enough to avoid rp_filter drops on remote peer.
Details:
Currently, sctp will do a routing attempt without specifying the src
address and compare the returned value (preferred source) with the
addresses that the socket is bound to. When using secondary addresses,
this will not match.
Then it will try specifying each of the addresses that the socket is
bound to and re-routing, checking if that address is valid as src for
that dst. Thing is, this check alone is weak:
# ip r l
192.168.100.0/24 dev eth1 proto kernel scope link src 192.168.100.149
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.147
# ip a l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:15:18:6a brd ff:ff:ff:ff:ff:ff
inet 192.168.122.147/24 brd 192.168.122.255 scope global dynamic eth0
valid_lft 2160sec preferred_lft 2160sec
inet 192.168.122.148/24 scope global secondary eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe15:186a/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:b3:91:46 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.149/24 brd 192.168.100.255 scope global dynamic eth1
valid_lft 2162sec preferred_lft 2162sec
inet 192.168.100.148/24 scope global secondary eth1
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:feb3:9146/64 scope link
valid_lft forever preferred_lft forever
4: ens9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:05:47:ee brd ff:ff:ff:ff:ff:ff
inet6 fe80::5054:ff:fe05:47ee/64 scope link
valid_lft forever preferred_lft forever
# ip r g 192.168.100.193 from 192.168.122.148
192.168.100.193 from 192.168.122.148 dev eth1
cache
Even if you specify an interface:
# ip r g 192.168.100.193 from 192.168.122.148 oif eth1
192.168.100.193 from 192.168.122.148 dev eth1
cache
Although this would be valid, peers using rp_filter will drop such
packets as their src doesn't match the routes for that interface.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paves the day for the next patch. Functionality stays untouched.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Arik introduced an rtnl-locked regulatory API to be able
to differentiate between place do/don't have the RTNL;
this fixes missing locking in some of the code paths
2. Two small mesh bugfixes from Bob, one to avoid treating
a certain malformed over-the-air frame and one to avoid
sending a garbage field over the air.
3. A fix for powersave during WoWLAN suspend from Krishna Chaitanya.
4. A fix for a powersave vs. aggregation teardown race, from Michal.
5. Thomas reduced the loglevel of CRDA messages to avoid spamming
the kernel log with mostly irrelevant information.
6. Tom fixed a dangling debugfs directory pointer that could cause
crashes if subsequent addition of the same interface to debugfs
failed for some reason.
7. A fix from myself for a list corruption issue in mac80211 during
combined interface shutdown/removal - shut down interfaces first
and only then remove them to avoid that.
-----BEGIN PGP SIGNATURE-----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=US5Y
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2015-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Some fixes for the current cycle:
1. Arik introduced an rtnl-locked regulatory API to be able
to differentiate between place do/don't have the RTNL;
this fixes missing locking in some of the code paths
2. Two small mesh bugfixes from Bob, one to avoid treating
a certain malformed over-the-air frame and one to avoid
sending a garbage field over the air.
3. A fix for powersave during WoWLAN suspend from Krishna Chaitanya.
4. A fix for a powersave vs. aggregation teardown race, from Michal.
5. Thomas reduced the loglevel of CRDA messages to avoid spamming
the kernel log with mostly irrelevant information.
6. Tom fixed a dangling debugfs directory pointer that could cause
crashes if subsequent addition of the same interface to debugfs
failed for some reason.
7. A fix from myself for a list corruption issue in mac80211 during
combined interface shutdown/removal - shut down interfaces first
and only then remove them to avoid that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We store c45 PHY's id information in c45_ids, so it should be used to
check the matching between PHY driver and PHY device for c45 PHY.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__vxlan_find_mac invokes ether_addr_equal on the eth_addr field,
which triggers unaligned access messages, so rearrange vxlan_fdb
to avoid this in the most non-intrusive way.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the userspace accesses down into the common function in
preparation for the next set of patches. Also change to copying
the fields explicitly instead of assuming a fixed order in
pt_regs and the kernel data structures.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437354550-25858-4-git-send-email-brgerst@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no legitimate reason for usermode to modify the 'orig_ax'
field on entry to vm86 mode, so copy it from the 32-bit regs.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437354550-25858-3-git-send-email-brgerst@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to save FS and non-lazy GS outside the 32-bit
regs. Lazy GS still needs to be saved because it wasn't saved
on syscall entry. Save it in the gs slot of regs32, which is
present but unused.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437354550-25858-2-git-send-email-brgerst@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kernel generates a lot of warnings when dst entry reference counter
overflows and becomes negative. That bug was seen several times at
machines with outdated 3.10.y kernels. Most like it's already fixed
in upstream. Anyway that flood completely kills machine and makes
further debugging impossible.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on system speed, the large lookup/insert/delete loops of the testsuite can
take a considerable amount of time to complete causing watchdog warnings to appear.
Allow other tasks to be scheduled throughout the loops.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) If sk_filter() is applied, skb was leaked (not freed)
2) Testing SOCK_DEAD twice is racy :
packet could be freed while already queued.
3) Remove obsolete comment about caching skb->len
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Teranetics TN2020 is compliant with IEEE 802.3an 10 Gigabit.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
intel_guc_fwif.h contains the subset of the GuC interface that we
will need for submission of commands through the GuC. These MUST
be kept in sync with the definitions used by the GuC firmware, and
updates to this file will (or should) be autogenerated from the
source files used to build the firmware. Editing this file is
therefore not recommended.
i915_guc_reg.h contains definitions of GuC-related hardware:
registers, bitmasks, etc. These should match the BSpec.
v2:
Files renamed & resliced per review comments by Chris Wilson
v4:
Added DON'T-EDIT-ME warning [Tom O'Rourke]
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Two new module parameters: "enable_guc_submission" which will turn
on submission of batchbuffers via the GuC (when implemented), and
"guc_log_level" which controls the level of debugging logged by the
GuC and captured by the host.
Signed-off-by: Alex Dai <yu.dai@intel.com>
v4:
Mark "enable_guc_submission" unsafe [Daniel Vetter]
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915_gem_object_create_from_data() is a generic function to save data
from a plain linear buffer in a new pageable gem object that can later
be accessed by the CPU and/or GPU.
We will need this for the microcontroller firmware loading support code.
Derived from i915_gem_object_write(), originally by Alex Dai
v2:
Change of function: now allocates & fills a new object, rather than
writing to an existing object
New name courtesy of Chris Wilson
Explicit domain-setting and other improvements per review comments
by Chris Wilson & Daniel Vetter
v4:
Rebased
Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make WT really mean WT (rather than UC).
I can't see why commit 9cd25aac1f ("x86/mm/pat: Emulate PAT when
it is disabled") didn't make this to match its changes to
pat_init().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/55ACC3660200007800092E62@mail.emea.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Complete the set of dependent features that need disabling at
once: XSAVEC, AVX-512 and all currently known to the kernel
extensions to it, as well as MPX need to be disabled too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/55ACC40D0200007800092E6C@mail.emea.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make sure to stop tracing only once we are past a point where
all latency tracing events have been processed (irqs are not
enabled again). This has the slight advantage of capturing more
latency related events in the idle path, but most importantly it
makes sure that latency tracing doesn't get re-enabled
inadvertently when new events are coming in.
This makes the irqsoff latency tracer useful again, as we stop
capturing CPU sleep time as IRQ latency.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Cc: patchwork-lst@pengutronix.de
Link: http://lkml.kernel.org/r/1437410090-3747-1-git-send-email-l.stach@pengutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It has never had any effect. Remove it for comprehensibility.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c91fa38507760d9e54a4b8737fa6409bde896b33.1437418322.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
New features:
- Allow filtering perf's pid via 'perf record --exclude-perf' (Wang Nan)
- 'perf trace' now supports syscall groups, like strace, i.e:
$ trace -e file touch file
Will expand 'file' into multiple, file related, syscalls. More work needed to
add extra groups for other syscall groups, and also to complement what was
added for the 'file' group, included as a proof of concept. (Arnaldo Carvalho de Melo)
- Add lock_pi stresser to 'perf bench futex', to test the kernel code
related to FUTEX_(UN)LOCK_PI (Davidlohr Bueso)
User visible fixes:
- Apply --filter to all events in a glob matching, not just the last one (Wang Nan)
Documentation:
- Document setting '-e pmu/period=N/' in the 'perf record' man page (Kan Liang)
Infrastructure:
- 'perf probe' code simplifications and movements to separate files (Masami Hiramatsu)
- Fix makefile generation under 'dash' (Sergei Trofimovich)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EM3X
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Allow filtering out of perf's PID via 'perf record --exclude-perf'. (Wang Nan)
- 'perf trace' now supports syscall groups, like strace, i.e:
$ trace -e file touch file
Will expand 'file' into multiple, file related, syscalls. More work needed to
add extra groups for other syscall groups, and also to complement what was
added for the 'file' group, included as a proof of concept. (Arnaldo Carvalho de Melo)
- Add lock_pi stresser to 'perf bench futex', to test the kernel code
related to FUTEX_(UN)LOCK_PI. (Davidlohr Bueso)
User visible fixes:
- Apply --filter to all events in a glob matching, not just the last one. (Wang Nan)
Documentation changes:
- Document setting '-e pmu/period=N/' in the 'perf record' man page. (Kan Liang)
Infrastructure changes:
- 'perf probe' code simplifications and movements to separate files. (Masami Hiramatsu)
- Fix makefile generation under 'dash'. (Sergei Trofimovich)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MPX setups private anonymous mapping, but uses vma->vm_ops too.
This can confuse core VM, as it relies on vm->vm_ops to
distinguish file VMAs from anonymous.
As result we will get SIGBUS, because handle_pte_fault() thinks
it's file VMA without vm_ops->fault and it doesn't know how to
handle the situation properly.
Let's fix that by not setting ->vm_ops.
We don't really need ->vm_ops here: MPX VMA can be detected with
VM_MPX flag. And vma_merge() will not merge MPX VMA with non-MPX
VMA, because ->vm_flags won't match.
The only thing left is name of VMA. I'm not sure if it's part of
ABI, or we can just drop it. The patch keep it by providing
arch_vma_name() on x86.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> # Fixes: 6b7339f4 (mm: avoid setting up anonymous pages into file mapping)
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@sr71.net
Link: http://lkml.kernel.org/r/20150720212958.305CC3E9@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MSR_IA32_ENERGY_PERF_BIAS is lost after suspend/resume:
x86_energy_perf_policy -r before
cpu0: 0x0000000000000006
cpu1: 0x0000000000000006
cpu2: 0x0000000000000006
cpu3: 0x0000000000000006
cpu4: 0x0000000000000006
cpu5: 0x0000000000000006
cpu6: 0x0000000000000006
cpu7: 0x0000000000000006
after
cpu0: 0x0000000000000000
cpu1: 0x0000000000000006
cpu2: 0x0000000000000006
cpu3: 0x0000000000000006
cpu4: 0x0000000000000006
cpu5: 0x0000000000000006
cpu6: 0x0000000000000006
cpu7: 0x0000000000000006
Resulting in inconsistent energy policy settings across CPUs.
This register is set via init_intel() at bootup. During resume,
the secondary CPUs are brought online again and init_intel() is
callled which re-initializes the register. The boot CPU however
never reinitializes the register.
Add a syscore callback to reinitialize the register for the boot CPU.
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437428878-4105-1-git-send-email-labbott@fedoraproject.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
flush_tlb_info->flush_start/end are both normal virtual
addresses. When calculating 'nr_pages' (only used for the
tracepoint), I neglected to put parenthesis in.
Thanks to David Koufaty for pointing this out.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@sr71.net
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20150720230153.9E834081@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Function returns 'void __iomem *' so use IOMEM_ERR_PTR for returning
an error. This fixes sparse warning:
arch/arm/mach-exynos/platsmp.c:185:31: warning: incorrect type in return expression (different address spaces)
arch/arm/mach-exynos/platsmp.c:185:31: expected void [noderef] <asn:2>*
arch/arm/mach-exynos/platsmp.c:185:31: got void *
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The magic cookie for entering sleep state was defined and used in
two different places: firmware.c and suspend.c. Move it to one common
place to reduce duplication.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Function is not used outside of this unit, make it static.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
A previously defined Device Tree node, can be extended either by defining
a node using the same full path or by creating a label for the node and
referencing to it.
Using full paths is more error prone since if there was a typo error, a
new node will be created instead of extending the node as it was desired.
This will lead to run-time errors that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error which
makes it easier to detect the mistake since happens at build-time instead.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The dtc compiler combines all the defined nodes that have the same path
so a device node definition can be in one file and later be extended in
another one.
That's the case of the Exynos5420 pinctrl device nodes that are defined
in the exynos5420.dtsi file and extended in exynos5420-pinctrl.dtsi.
But since the exynos5420.dtsi file includes the exynos5420-pinctrl.dtsi
before the pinctrl device nodes are actually defined, the definition of
the pinctrl device nodes happens in exynos5420-pinctrl.dtsi and are
extended in exynos5420.dtsi.
That is the opposite of the original intention so even when there is no
difference in practice, the exynos5420-pinctrl.dtsi include should be
moved at the end of the exynos5420.dtsi file after the pinctrl device
nodes have been already defined.
This will also allow to later change the exynos5420-pinctrl.dtsi file
to use labels instead of full paths to extend the pinctrl nodes. Since
keeping the include at the top, would cause a dtc build error due the
pinctrl labels not being defined yet.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
A previously defined Device Tree node, can be extended either by defining
a node using the same full path or by creating a label for the node and
referencing to it.
Using full paths is more error prone since if there was a typo error, a
new node will be created instead of extending the node as it was desired.
This will lead to run-time errors that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error which
makes it easier to detect the mistake since happens at build-time instead.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The dtc compiler combines all the defined nodes that have the same path
so a device node definition can be in one file and later be extended in
another one.
That's the case of the Exynos5250 pinctrl device nodes that are defined
in the exynos5250.dtsi file and extended in exynos5250-pinctrl.dtsi.
But since the exynos5250.dtsi file includes the exynos5250-pinctrl.dtsi
before the pinctrl device nodes are actually defined, the definition of
the pinctrl device nodes happens in exynos5250-pinctrl.dtsi and are
extended in exynos5250.dtsi.
That is the opposite of the original intention so even when there is no
difference in practice, the exynos5250-pinctrl.dtsi include should be
moved at the end of the exynos5250.dtsi file after the pinctrl device
nodes have been already defined.
This will also allow to later change the exynos5250-pinctrl.dtsi file
to use labels instead of full paths to extend the pinctrl nodes. Since
keeping the include at the top, would cause a dtc build error due the
pinctrl labels not being defined yet.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Trip points corresponding to the one defined in the exynos_tmu_data.c
for Exynos5422 have been included so define thermal-zones attribute.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This changes enables TMU IP block on the Exynos5422 Odroid-XU3
device.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Add some safe values for over heat and over voltage. The Trats2 uses
3.8 V battery and during testing it operated properly under 4.48 V.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable regulator for usbdrd3_0 and usbdrd3_1. Looking at the schematic
pin diagram for MAX77802 USB3_0 and USB3_1 is regulated by LDO9 and
LD011.
This removes following warnings during boot:
[ 3.503539] exynos-dwc3 usb@12000000: Looking up vdd33-supply from device tree
[ 3.503556] exynos-dwc3 usb@12000000: Looking up vdd33-supply property in node /usb@12000000 failed
[ 3.503568] usb@12000000 supply vdd33 not found, using dummy regulator
[ 3.509154] exynos-dwc3 usb@12000000: Looking up vdd10-supply from device tree
[ 3.509170] exynos-dwc3 usb@12000000: Looking up vdd10-supply property in node /usb@12000000 failed
[ 3.509181] usb@12000000 supply vdd10 not found, using dummy regulator
[ 3.917548] exynos-dwc3 usb@12400000: Looking up vdd33-supply from device tree
[ 3.917565] exynos-dwc3 usb@12400000: Looking up vdd33-supply property in node /usb@12400000 failed
[ 3.917578] usb@12400000 supply vdd33 not found, using dummy regulator
[ 3.922731] exynos-dwc3 usb@12400000: Looking up vdd10-supply from device tree
[ 3.922747] exynos-dwc3 usb@12400000: Looking up vdd10-supply property in node /usb@12400000 failed
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The UART status properties are indented one level too deep, and we want
to derive a device tree for the ODROID-XU. Fix this before it propagates.
Signed-off-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Alexei Starovoitov says:
====================
bpf: introduce bpf_skb_vlan_push/pop() helpers
Let TC+eBPF programs call skb_vlan_push/pop via helpers.
v1->v2:
- reworded commit log to better explain correctness of re-caching
and fixed comparison of mixed endiannes (suggested by Eric)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
improve accuracy of timing in test_bpf and add two stress tests:
- {skb->data[0], get_smp_processor_id} repeated 2k times
- {skb->data[0], vlan_push} x 68 followed by {skb->data[0], vlan_pop} x 68
1st test is useful to test performance of JIT implementation of BPF_LD_ABS
together with BPF_CALL instructions.
2nd test is stressing skb_vlan_push/pop logic together with skb->data access
via BPF_LD_ABS insn which checks that re-caching of skb->data is done correctly.
In order to call bpf_skb_vlan_push() from test_bpf.ko have to add
three export_symbol_gpl.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
