Commit graph

547,358 commits

Author SHA1 Message Date
Michal Kazior
6fcafef736 ath10k: clear htt.freq
If htt.freq isn't cleared and contains garbage fw
may discard tx packets. Prevent this from
happening by clearing htt.freq properly.

Possible manifestation of the problem could be not
being able to send auth request/response frames on
firmware with HTT >= 3.4 (when freq param was
introduced), e.g. on qca6174.

Fixes: 8d6d362436 ("ath10k: fix offchan reliability")
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 14:58:15 +03:00
Kalle Valo
dc3632a1ad ath10k: fix HTT op backwards compatibility for QCA6174
Commit 8348db2984 ("ath10k: add ATH10K_FW_IE_HTT_OP_VERSION") broke QCA6174
receive side as the HTT ids from ATH10K_FW_HTT_OP_VERSION_MAIN don't have
HTT_TLV_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND set. Fix this by adding a backwards
compatibility code which sets HTT op version if it's not set by the firmware
image.

Fixes: 8348db2984 ("ath10k: add ATH10K_FW_IE_HTT_OP_VERSION")
Reported-by: Michal Kazior <michal.kazior@tieto.com>
Tested-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 14:56:06 +03:00
Axel Lin
ba867bc60a mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias
This is a I2C driver, so it's wrong to use platform prefix for the
modalias. We have all needed i2c aliases coming form MODULE_DEVICE_TABLE,
so let's remove the wrong and unneeded "platform:twl6040" modalias.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 12:39:22 +01:00
Heiko Carstens
1a327ffd3d s390/syscalls: simplify syscall_get_arch()
Given that sizeof(long) is now always 8, we can simplify syscall_get_arch()
a bit.
Just another piece I didn't find when removing 31 bit support.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-30 13:26:07 +02:00
Markus Pargmann
5c5506bdaf ARM: dts: imx25-pinfunc: Add several pinfunctions
This patch adds some not yet defined pinfunctions. It also adds two
comments about mistakes in the i.MX25 reference manual so it is easier
to spot the difference between reference manual and pinfunction
definitions.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 19:22:12 +08:00
Stefan Agner
53f643d23b ARM: dts: vf610: fix missing irqs
While adding the MSCM interrupt router, all interrupts have been moved
to vfxxx.dtsi again. However, some properties got lost. Readd the
missing interrupt properties.

Fixes: 97e6466ab9d0 ("ARM: dts: vf610: add Miscellaneous System Control
Module (MSCM)")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 19:22:12 +08:00
George Joseph
3274af07c9 ARM: dts: cubox: Map gpio-keys to gpio3 8
The Cubox has a recessed button between the HDMI and RJ-45 connectors
that wasn't mapped in the device tree, so I've mapped it to gpio-keys
BTN_0.

Signed-off-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 19:22:06 +08:00
Matthias Brugger
85fc20b2ad ARM: DTS: Add watchdog to mt6589
This patch adds the watchdog to the device tree of Mediatek mt6589 SoC.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-03-30 13:18:23 +02:00
Will Deacon
475bfd3d67 arm64: defconfig: updates for 4.1
Enable a few useful options in our defconfig:

  - New platform support (exynos7, seattle, tegra132)
  - SKY2 (ethernet in newer revisions of Juno)
  - Xgene reboot support
  - Virtio-pci for kvmtool and qemu
  - EFIVAR_FS (previously selected as a module)
  - NFSv4

Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 11:29:35 +01:00
Sascha Hauer
979275897e dt-bindings: ARM: Mediatek: document binding for the PMIC wrapper
This adds documentation for the PMIC wrapper unit found on Mediatek
SoCs. Currently support are the MT8135 and MT8173 SoCs, but the PMIC
wrapper can also be found on MT6xxx and possibly other SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-03-30 12:26:35 +02:00
Flora Fu
1f022d84bd soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
This adds support for the PMIC wrapper found on MediaTek MT8135 and
MT8173 SoCs. The PMIC wrapper is found on MT6xxx SoCs aswell but these
are currently not supported.

On MediaTek MT8135, MT8173 and other SoCs the PMIC is connected via
SPI. The SPI master interface is not directly visible to the CPU, but
only through the PMIC wrapper inside the SoC. The communication between
the SoC and the PMIC can optionally be encrypted. Also a non standard
Dual IO SPI mode can be used to increase speed. The MT8135 also supports
a special feature named "IP Pairing". With IP Pairing the pins of some
SoC internal peripherals can be on the PMIC. The signals of these pins
are routed over the SPI bus using the pwrap bridge. Because of these
optional non SPI conform features the PMIC driver is not implemented as
a SPI bus master driver.

Signed-off-by: Flora Fu, MediaTek
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-03-30 12:25:40 +02:00
Marc Zyngier
359b706473 arm64: Extract feature parsing code from cpu_errata.c
As we detect more architectural features at runtime, it makes
sense to reuse the existing framework whilst avoiding to call
a feature an erratum...

This patch extract the core capability parsing, moves it into
a new file (cpufeature.c), and let the CPU errata detection code
use it.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 11:03:43 +01:00
Marc Zyngier
fef7f2b201 arm64: alternative: Allow immediate branch as alternative instruction
Since all immediate branches are PC-relative on Aarch64, these
instructions cannot be used as an alternative with the simplistic
approach we currently have (the immediate has been computed from
the .altinstr_replacement section, and end-up being completely off
if we insert it directly).

This patch handles the b and bl instructions in a different way,
using the insn framework to recompute the immediate, and generate
the right displacement.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 11:03:43 +01:00
Marc Zyngier
0978fb25f8 arm64: insn: Add aarch64_insn_decode_immediate
Patching an instruction sometimes requires extracting the immediate
field from this instruction. To facilitate this, and avoid
potential duplication of code, add aarch64_insn_decode_immediate
as the reciprocal to aarch64_insn_encode_immediate.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 11:03:42 +01:00
Tomeu Vizoso
03650bd201 ARM: tegra: Add EMC timings to Nyan Blaze device tree
This adds a new file, tegra124-nyan-blaze-emc.dtsi that contains
valid timings for the EMC memory clock. The file is included to the
main device tree file for the Nyan Blaze.

The frequency 528MHz is missing because we don't currently have a timing
configuration that works.

Additionally, only the timings for the ram-code 1 is present as that's
what could be tested currently, though downstream has timings for more
ram-codes.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-30 11:43:39 +02:00
Tomeu Vizoso
3182c7c6c7 ARM: tegra: Add EMC timings to Nyan Big device tree
This adds a new file, tegra124-nyan-big-emc.dtsi that contains
valid timings for the EMC memory clock. The file is included to the
main device tree file for the Nyan Big.

The frequency 528MHz is missing because we don't currently have a timing
configuration that works.

Additionally, only the timings for the ram-code 1 is present as that's
what could be tested currently, though downstream has timings for more
ram-codes.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-30 11:43:39 +02:00
Mikko Perttunen
6e72cf0027 ARM: tegra: Add EMC timings to Jetson TK1 device tree
This adds a new file, tegra124-jetson-tk1-emc.dtsi that contains
valid timings for the EMC memory clock. The file is included to the
main Jetson TK1 device tree.

The data is generated from the V5.0.17 version of the DVFS tables.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-30 11:43:38 +02:00
Mikko Perttunen
b273c88737 ARM: tegra: Add EMC to Tegra124 device tree
This adds a node for the EMC memory controller. It is always enabled, but only
provides read-only functionality without board-specific timing tables.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-30 11:43:37 +02:00
Tomeu Vizoso
c5f8e8ca09 ARM: tegra: Add Tegra124 ACTMON support
Add device node for the ACTMON block to the Tegra124 device tree.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-30 11:43:37 +02:00
Tomeu Vizoso
5526446878 of: Add binding for NVIDIA Tegra ACTMON node
This block gathers statistics about various counters and can be configured to
fire interrupts when thresholds are crossed.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
[treding@nvidia.com: rename document, minor cleanups]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-30 11:43:36 +02:00
Ander Conselvan de Oliveira
8a5c0bde54 drm/atomic: Clear crtcs, connectors and planes when clearing state
Users of the atomic state assume that if the pointer to a crtc, plane or
connector is not NULL in the respective object vector, than the state
for that object in *_states vector also won't be NULL. That assumption
was broken by drm_atomic_state_clear(), which would clear the state
pointer but leave the pointer to the object still set.

This fixes a NULL pointer dereference in i915 caused by the use of
drm_atomic_state_clear().

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-30 11:39:30 +02:00
Ivan T. Ivanov
dc716bbf1d mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's
Some of the PMIC's could have specific regmap configuration
tables in future, so add specific compatible strings for known
PMIC's. Also print runtime detected chip revision information.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:07:08 +01:00
Krzysztof Kozlowski
c31e858b1a mfd: axp20x: Fix duplicate const for model names
Replace duplicated const keyword for 'axp20x_model_names' with proper
array of const pointers to const strings.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:07:03 +01:00
Aaro Koskinen
dfe514b67a mfd: menelaus: Use macro for magic number
Use macro to check a register bit.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:06:55 +01:00
Aaro Koskinen
1ea8684e1e mfd: menelaus: Drop support for SW controller VCORE
Drop support for SW controlled VCORE, nobody uses it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:06:50 +01:00
Aaro Koskinen
5cdc7f0216 mfd: menelaus: Delete omap_has_menelaus
Delete unused macro.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:06:39 +01:00
Charles Keepax
6e00ff0793 mfd: arizona: Correct type of gpio_defaults
gpio_defaults needs to be specified as an unsigned int rather than an
int, because the intention of the DT binding is that all out of range
values for a 16-bit register will cause the defaults to be used,
however, if gpio_defaults is an int then values that are larger than
INT_MAX will become negative numbers and be written out directly to the
hardware. As no where in the code replies on gpio_defaults being an int,
the simplest fix is to just change it to unsigned.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:06:29 +01:00
Andy Shevchenko
aec9038ec9 mfd: lpc_ich: Sort IDs
This patch just sorts IDs in the table for better maintenance. There is no
functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:06:16 +01:00
Łukasz Stelmach
78c059c65a mfd: Fix a typo in Kconfig
Signed-off-by: Łukasz Stelmach <stlman@poczta.fm>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:05:07 +01:00
Arik Nemtsov
070e176a75 mac80211: send HT/VHT IEs in TDLS discovery response
These are mandated by IEEE802.11-2012 section 8.5.8.6 and IEEE802.11ac-2013
section 8.5.8.16.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:48:59 +02:00
Janusz.Dziedzic@tieto.com
abcff6ef01 mac80211: add VHT support for IBSS
Add VHT support for IBSS. Drivers could activate
this feature by setting NL80211_EXT_FEATURE_VHT_IBSS
flag.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:48:26 +02:00
Janusz.Dziedzic@tieto.com
76bed0f43b mac80211: IBSS fix scan request
In case of wide bandwidth (wider than 20MHz) used by IBSS,
scan all channels in chandef to be able to find neighboring
IBSS netwqworks that use the same overall channels but a different
control channel.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:47:56 +02:00
Johannes Berg
97ffe75791 mac80211: factor out station lookup from ieee80211_build_hdr()
In order to look up the RA station earlier to implement a TX
fastpath, factor out the lookup from ieee80211_build_hdr().
To always have a valid station pointer, also move some of the
checks into the new function.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:47:19 +02:00
Johannes Berg
527871d720 mac80211: make sta.wme indicate whether QoS is used
Indicating just the peer's capability is fairly pointless
if the local device doesn't support it. Make the variable
track both combined, and remove the 'local support' check
in the TX path.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:47:16 +02:00
Johannes Berg
a73f8e21f3 mac80211: send AP probe as unicast again
Louis reported that a static checker was complaining that
the 'dst' variable was set (multiple times) but not used.
This is due to a previous commit having removed the usage
(apparently erroneously), so add it back.

Fixes: a344d6778a ("mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR")
Reported-by: Louis Langholtz <lou_langholtz@me.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:47:14 +02:00
Rabeeh Khoury
ffbae6b719 ARM: dts: hummingboard: Setup pwm lines
Setup pwm lines as follows -
pwm1: In case HummingBoard base carrier; this pin drives through a serial
      capacitor the mono out of the audio jack.
      In case HummingBoard pro the this pad can be reached by wiring to
      C8 capacitors on the board.
pwm2: Setup pwm2 on gpio-1 but leave the default function of the iopad as
      a gpio.
      The user can change the io pad mux in user space and therefore use
      this function on gpio-1 (pin number 7 on the 26 pin header).
pwm3,pwm4: unused

Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
[tweaked alias for pwm pinctrl group --rmk]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:53 +08:00
Russell King
a931bbbc64 ARM: dts: hummingboard: enable PCF8523 RTC support
Enable the commented out PCF8523 RTC support for Hummingboard pro
base boards.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:53 +08:00
Russell King
42919c5c14 ARM: dts: Re-license SolidRun iMX6 platform DT GPL v2/X11
Update SolidRun iMX6 platforms DT descriptions to be dual-licensed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:52 +08:00
Uwe Kleine-König
8f0b07a428 ARM: dts: imx28: add alternative pinmuxing for spi3
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:52 +08:00
Fabio Estevam
6f9dbfda48 ARM: dts: imx6sx: Add label snvs_rtc
It may be useful to disable the internal snvs-rtc when an external rtc is
available. This patch adds a label so that dts files can disable it.

Based on a patch from Markus Pargmann for imx6qdl.dtsi.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:51 +08:00
Fabio Estevam
8716186f5c ARM: dts: imx6sl: Add label snvs_rtc
It may be useful to disable the internal snvs-rtc when an external rtc is
available. This patch adds a label so that dts files can disable it.

Based on a patch from Markus Pargmann for imx6qdl.dtsi.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:51 +08:00
Marc Zyngier
1451756479 ARM: imx6: Warn when an old DT is detected
Now that the GPC has been converted to be a full blown irqchip
(and not a mole on the side of the GIC), booting a new kernel
with an old DT is likely to result in a rough ride for the user.

This patch makes sure such a situation is promptly detected and
the user made aware that a DT update is in order.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:51 +08:00
Marc Zyngier
e33b67523f ARM: imx6: Allow GPC interrupts affinity to be changed
While converting the GPC code to a stacked irqchip, we lost the
possibility to change the CPU affinity of an interrupt routed
through the GPC.

This patch restore the expected behaviour by forwarding the
affinity setup to the underlying irqchip (GIC).

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:50 +08:00
Peter Chen
4e18a2243a ARM: imx6qdl-sabreauto.dtsi: add max7310 support
max7310 is an i2c interface gpio expander

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:50 +08:00
Fabio Estevam
159097f86d ARM: dts: imx6sl-warp: Add BCM4330 support
Warp has a Murata chip based on a BCM4330 that provides Wifi and Bluetooth
functionality.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:50 +08:00
Gwenhael Goavec-Merou
e9b16e9cae ARM: dts: imx28-apf28dev: add wakeup function to user button
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:49 +08:00
Gwenhael Goavec-Merou
816bd40186 ARM: dts: imx28-apf28dev: fix user button polarity
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:49 +08:00
Markus Pargmann
6ada7bf59b ARM: dts: imx25-pinfunc: remove input values for pinfuncs without input register
input values are only useful for pin functions which define a input
register. This patch removes all input values of pin functions which do
not have an input configuration register.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:48 +08:00
Stefan Agner
c09d0f7ce0 ARM: dts: vf610: add Miscellaneous System Control Module (MSCM)
Add the Miscellaneous System Control Module (MSCM) to the base
device tree for Vybrid SoC's. This module contains registers
to get information of the individual and current (accessing)
CPU. In a second block, there is an interrupt router, which
handles the routing of the interrupts between the two CPU cores
on VF6xx variants of the SoC. However, also on single core
variants the interrupt router needs to be configured in order
to receive interrupts on the CPU's interrupt controller. Almost
all peripheral interrupts are routed through the router, hence
the MSCM module is the default interrupt parent for this SoC.

In a earlier commit the interrupt nodes were moved out of the
peripheral nodes and specified in the CPU specific vf500.dtsi
device tree. This allowed to use the base device tree vfxxx.dtsi
also for a Cortex-M4 specific device tree, which uses different
interrupt nodes due to the NVIC interrupt controller. However,
since the interrupt parent for peripherals is the MSCM module
independently which CPU the device tree is used for, we can move
the interrupt nodes into the base device tree vfxxx.dtsi again.
Depending on which CPU this base device tree will be used with,
the correct parent interrupt controller has to be assigned to
the MSCM-IR node (GIC or NVIC). The driver takes care of the
parent interrupt controller specific needs (interrupt-cells).

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:48 +08:00
Fabio Estevam
649b1fe856 ARM: dts: imx6sl-warp: Pass 'bus-width' property
USDHC2 port uses all the 8 data signals, so pass the 'bus-width' property
accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-30 16:43:34 +08:00