Remove a call to grab_cache_page() by using a folio throughout
this function.
[agruenba@redhat.com: Adjust to return value difference between
bio_add_page() and bio_add_folio().]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Pass in the folio instead of the page. Add an assert that this is
not a large folio as we'd need a more complex solution if we wanted to
kmap() each page out of a large folio. Removes a use of folio->page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[agruenba@redhat.com: Rename gfs2_jhead_folio_srch() to gfs2_jhead_folio_search().]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
We are preparing to remove bh->b_page. Use kmap_local_folio() instead
of kmap_local_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Remove a reference to bh->b_page which is going to be removed soon.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The lock bit is maintained on the folio, not on the page. Saves two
calls to compound_head() as well as removing two references to
bh->b_page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
We are preparing to remove bh->b_page. gfs2_log_write() should continue
to operate on pages as some of the memory being logged does not come
from folios, so convert from folio to page in this function.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_evict_inode(), in the unlikely case that we cannot defer
deleting the inode, it is not safe to fall back to deleting the inode;
the only valid choice we have is to skip the delete.
In addition, in evict_should_delete(), if we cannot lock the inode glock
exclusively, we are in a bad enough state that skipping the delete is
likely a better choice than trying to recover from the failure later.
Fixes: c5b7a2400e ("gfs2: Only defer deletes when we have an iopen glock")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In glock_set_object() and glock_clear_object(), there is no need to
print the glock type and number when we dump the entire glock, anyway.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In evict_should_delete(), when gfs2_upgrade_iopen_glock() fails, we
detach the iopen glock from the inode without calling
glock_clear_object(). This leads to a warning in glock_set_object()
when the same inode is recreated and the glock is reused.
Fix that by only detaching the iopen glock in gfs2_evict_inode().
In addition, remove the dequeue code from evict_should_delete(); we
already perform a conditional dequeue in gfs2_evict_inode().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_try_evict(), we try grabbing the inode to evict, we try to evict
it, and then we try grabbing it again to see if it still exists. There
is no guarantee that we will end up with the same inode both times; the
inode validity check that commit ffd1cf0443 ("gfs2: Prevent inode
creation race") added to the first grab is actually needed both times.
(To avoid code duplication, add a grab_existing_inode() helper.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_glock_dq(), we must drop the glock spin lock before calling
->lm_cancel, but this means that in the meantime, the operation we are
trying to cancel could complete. If the operation completes
unsuccessfully, another holder can end up at the head of the queue and
another ->lm_lock operation can get started. In this case, we would end
up canceling that second operation by accident.
To prevent that, introduce a new GLF_CANCELING flag. Set that flag in
gfs2_glock_dq() when trying to cancel an operation. When seeing that
flag, finish_xmote() will then keep the GLF_LOCK flag set to prevent
other glock operations from taking place. gfs2_glock_dq() then
completes the cancelation attempt by clearing GLF_LOCK and
GLF_CANCELING.
In addition, add a missing GLF_DEMOTE_IN_PROGRESS check in
gfs2_glock_dq() to make sure that we won't accidentally cancel a demote
request.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In finish_xmote(), when a locking request is canceled, the corresponding
holder is moved to the tail of the holders list instead of being
dequeued immediately. When there is only a single holder, the canceled
locking request is then immediately repeated. This makes no sense; it
looks like another remnant of LM_FLAG_PRIORITY support.
Instead, dequeue canceled holders and proceed with the next holder in
finish_xmote(). We can then easily detect in gfs2_glock_dq() when a
holder has been canceled.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In run_queue(), check if the queue of pending requests is empty instead
of blindly assuming that it won't be.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Remove some more dead code in add_to_queue() that commit 0b93bac227
("gfs2: Remove LM_FLAG_PRIORITY flag") has rendered obsolete. This is a
continuation of commit 3302764610057 ("gfs2: remove dead code in
add_to_queue"); no functional change.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Having this flag attached to the iopen glock instead of the inode is
much simpler; it eliminates a protential weird race in gfs2_try_evict().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Glocks are always actively acquired by processes, but as indicated by
the GL_NOPID holder flag, some of them are then associated with objects
like cached inodes rather than the process that acquired them. As such,
for those glock holders, it makes little sense to dump which processes
originally acquired them.
Therefore, gfs2 is trying to hide the identity of the processes that
acquired those glocks. The code for doing that is incorrect though, so
fix it.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Introduce a new GLF_PENDING_REPLY flag to indicate that a reply from DLM
is expected. Include that flag in glock dumps to show more clearly
what's going on. (When the GLF_PENDING_REPLY flag is set, the GLF_LOCK
flag will also be set but the GLF_LOCK flag alone isn't sufficient to
tell that we are waiting for a DLM reply.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The function nvmet_pci_epf_create_cq() always unconditionally calls
nvmet_pci_epf_add_irq_vector() to add an IRQ vector for a completion
queue. But this is not correct if the host requested the creation of a
completion queue for polling, without an IRQ vector specified (i.e. the
flag NVME_CQ_IRQ_ENABLED is not set).
Fix this by calling nvmet_pci_epf_add_irq_vector() and setting the queue
flag NVMET_PCI_EPF_Q_IRQ_ENABLED for the cq only if NVME_CQ_IRQ_ENABLED
is set. While at it, also fix the error path to add the missing removal
of the added IRQ vector if nvmet_cq_create() fails.
Fixes: 0faa0fe6f9 ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The function nvmet_pci_epf_create_sq() use test_and_set_bit() to check
that a submission queue is not already live and if not, set the
NVMET_PCI_EPF_Q_LIVE queue flag to declare the sq live (ready to use).
However, this is done on entry to the function, before the submission
queue is actually fully initialized and ready to use. This creates a
race situation with the function nvmet_pci_epf_poll_sqs_work() which
looks at the NVMET_PCI_EPF_Q_LIVE queue flag to poll the submission
queue when it is live. This race can lead to invalid DMA transfers if
nvmet_pci_epf_poll_sqs_work() runs after the NVMET_PCI_EPF_Q_LIVE flag
is set but before setting the sq pci address and doorbell ofset.
Avoid this race by only testing the NVMET_PCI_EPF_Q_LIVE flag on entry
to nvmet_pci_epf_create_sq() and setting it after the submission queue
is fully setup before nvmet_pci_epf_create_sq() returns success.
Since the function nvmet_pci_epf_create_cq() also has the same racy flag
setting pattern, also make a similar change in that function.
Fixes: 0faa0fe6f9 ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Track the HPD pin instead of the corresponding encoder ports for pending
short/long HPD pulse events. This is how the pending hotplug events are
tracked and there is no reason for tracking the pulse events differently.
After this change intel_hpd_trigger_irq() will set the short pulse event
pending for all encoders using the given HPD pin. This doesn't change
the behavior, as atm in case of multiple (2) encoders sharing the same
pin only one will have a pulse handler, so for other encoders without a
pulse handler the event is ignored. Also setting the pulse event pending
for all encoders using the HPD pin is what happens after an actual HPD
IRQ, the effect of calling intel_hpd_trigger_irq() should match this.
In a following change this also makes it simpler to block the handling
of a short/long pulse event on an HPD pin for all the encoders using
this HPD pin.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304152917.3407080-2-imre.deak@intel.com
The `SAFETY` comment inside the `wake_up` method references
erroneously the `signal_pending` C function instead of the
`wake_up_process` which is actually called.
Fix the comment to reference the correct C function.
Fixes: fe95f58320 ("rust: task: adjust safety comments in Task methods")
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250308-comment-fix-v1-1-4bba709fd36d@posteo.net
[ Slightly reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The VMBus driver manages the MMIO space it owns via the hyperv_mmio
resource tree. Because the synthetic video framebuffer portion of the
MMIO space is initially setup by the Hyper-V host for each guest, the
VMBus driver does an early reserve of that portion of MMIO space in the
hyperv_mmio resource tree. It saves a pointer to that resource in
fb_mmio. When a VMBus driver requests MMIO space and passes "true"
for the "fb_overlap_ok" argument, the reserved framebuffer space is
used if possible. In that case it's not necessary to do another request
against the "shadow" hyperv_mmio resource tree because that resource
was already requested in the early reserve steps.
However, the vmbus_free_mmio() function currently does no special
handling for the fb_mmio resource. When a framebuffer device is
removed, or the driver is unbound, the current code for
vmbus_free_mmio() releases the reserved resource, leaving fb_mmio
pointing to memory that has been freed. If the same or another
driver is subsequently bound to the device, vmbus_allocate_mmio()
checks against fb_mmio, and potentially gets garbage. Furthermore
a second unbind operation produces this "nonexistent resource" error
because of the unbalanced behavior between vmbus_allocate_mmio() and
vmbus_free_mmio():
[ 55.499643] resource: Trying to free nonexistent
resource <0x00000000f0000000-0x00000000f07fffff>
Fix this by adding logic to vmbus_free_mmio() to recognize when
MMIO space in the fb_mmio reserved area would be released, and don't
release it. This filtering ensures the fb_mmio resource always exists,
and makes vmbus_free_mmio() more parallel with vmbus_allocate_mmio().
Fixes: be000f93e5 ("drivers:hv: Track allocations of children of hv_vmbus in private resource tree")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250310035208.275764-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250310035208.275764-1-mhklinux@outlook.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Merge 6.14-rc6 into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All modules that need CONFIG_CRC64 already select it, so there is no
need to bother users about the option.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250304230712.167600-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
All modules that need CONFIG_LIBCRC32C already select it, so there is no
need to bother users about the option.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250304230712.167600-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
None of the CRC library functions use __pure anymore, so the comment in
crc_benchmark() is outdated. But the comment was not really correct
anyway, since the CRC computation could (in principle) be optimized out
regardless of __pure. Update the comment to have a proper explanation.
Link: https://lore.kernel.org/r/20250305015830.37813-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
For handling the 0 <= len < sizeof(unsigned long) bytes left at the end,
do a 4-2-1 step-down instead of a byte-at-a-time loop. This allows
taking advantage of wider CRC instructions. Note that crc32c-3way.S
already uses this same optimization too.
crc_kunit shows an improvement of about 25% for len=127.
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250304213216.108925-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Wire up crc64_be_arch() and crc64_nvme_arch() for 64-bit RISC-V using
crc-clmul-template.h. This greatly improves the performance of these
CRCs on Zbc-capable CPUs in 64-bit kernels.
These optimized CRC64 functions are not yet supported in 32-bit kernels,
since crc-clmul-template.h assumes that the CRC fits in an unsigned
long. That implementation limitation could be addressed, but it would
add a fair bit of complexity, so it has been omitted for now.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250216225530.306980-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Wire up crc_t10dif_arch() for RISC-V using crc-clmul-template.h. This
greatly improves CRC-T10DIF performance on Zbc-capable CPUs.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250216225530.306980-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Delete the previous Zbc optimized CRC32 code, and re-implement it using
the new template. The new implementation is more optimized and shares
more code among CRC variants.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250216225530.306980-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add a "template" crc-clmul-template.h that can generate RISC-V Zbc
optimized CRC functions. Each generated CRC function is parameterized
by CRC length and bit order, and it accepts a pointer to the constants
struct required for the specific CRC polynomial desired. Update
gen-crc-consts.py to support generating the needed constants structs.
This makes it possible to easily wire up a Zbc optimized implementation
of almost any CRC.
The design generally follows what I did for x86, but it is simplified by
using RISC-V's scalar carryless multiplication Zbc, which has no
equivalent on x86. RISC-V's clmulr instruction is also helpful. A
potential switch to Zvbc (or support for Zvbc alongside Zbc) is left for
future work. For long messages Zvbc should be fastest, but it would
need to be shown to be worthwhile over just using Zbc which is
significantly more convenient to use, especially in the kernel context.
Compared to the existing Zbc-optimized CRC32 code and the earlier
proposed Zbc-optimized CRC-T10DIF code
(https://lore.kernel.org/r/20250211071101.181652-1-zhihang.shao.iscas@gmail.com),
this submission deduplicates the code among CRC variants and is
significantly more optimized. It uses "folding" to take better
advantage of instruction-level parallelism (to a more limited extent
than x86 for now, but it could be extended to more), it reworks the
Barrett reduction to eliminate unnecessary instructions, and it
documents all the math used and makes all the constants reproducible.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250216225530.306980-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Video players (eg. mpv) do periodic XResetScreenSaver() calls to
keep the screen on while the video playing. The modesetting ddx
plumbs these straight through into the kernel as DPMS setproperty
ioctls, without any filtering whatsoever. When implemented via
atomic these end up as empty commits on the crtc (which will
nonetheless take one full frame), which leads to a dropped
frame every time XResetScreenSaver() is called.
Let's just filter out redundant DPMS property changes in the
kernel to avoid this issue.
v2: Explain the resulting commits a bit better (Sima)
Document the behaviour in uapi docs (Sima)
Cc: stable@vger.kernel.org
Testcase: igt/kms_flip/flip-vs-dpms-on-nop
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250219160239.17502-1-ville.syrjala@linux.intel.com
The PCIe error handling has the nvme driver quiesce the device, attempt
to restart it, then wait for that restart to complete.
A PCIe DPC event also toggles the PCIe link. If the slot doesn't have
out-of-band presence detection, this will trigger a pciehp
re-enumeration.
The error handling that calls nvme_error_resume is holding the device
lock while this happens. This lock blocks pciehp's request to disconnect
the driver from proceeding.
Meanwhile the nvme's reset can't make forward progress because its
device isn't there anymore with outstanding IO, and the timeout handler
won't do anything to fix it because the device is undergoing error
handling.
End result: deadlocked.
Fix this by having the timeout handler short cut the disabling for a
disconnected PCIe device. The downside is that we're relying on an IO
timeout to clean up this mess, which could be a minute by default.
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add compatible string "fsl,imx93-pwm", "fsl,imx94-pwm" and "fsl,imx95-pwm",
which is backward compatible with i.MX7ULP. Set it to fall back to
"fsl,imx7ulp-pwm".
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250306170845.240555-1-Frank.Li@nxp.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Andy Shevchenko says:
The users of charlcd_alloc() call for additional memory allocation.
We may do it at the time of the main call as many other APIs do.
For this partially revert the change that brought us to the current
state of affairs, and refactor the code based on the original implementation.
Link: https://lore.kernel.org/r/20250224173010.219024-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The hd44780_common_alloc() uses hd for local variable while
the respective header uses hdc, rename to make it consistent
and avoid potential confuse with the drivers that use both
for different reasons. No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
HD44780 APIs all operate on struct charlcd objects. Moreover, the current users
always call charlcd_alloc() and hd44780_common_alloc(). Make the latter call
the former, so eliminate the additional allocation, to make it consistent with
the rest of API and avoid duplication.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Use the symmetrical API to free the common resources.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Use the symmetrical API to free the common resources.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Introduce hd44780_common_free() for symmetrical operation
to hd44780_common_alloc(). It will allow to modify both
in the future without touching the users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Allocate memory for custom data in charlcd_alloc() instead of doing that
explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Commit 2545c1c948 ("auxdisplay: Move hwidth and bwidth to struct
hd44780_common") makes charlcd_alloc() argument-less effectively dropping
the single allocation for the struct charlcd_priv object along with
the driver specific one. Restore that behaviour here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
In a rare situation of thermal limit during resume, GuC can
be slow and run into delays like this:
xe 0000:00:02.0: [drm] GT1: excessive init time: 667ms! \
[status = 0x8002F034, timeouts = 0]
xe 0000:00:02.0: [drm] GT1: excessive init time: \
[freq = 100MHz (req = 800MHz), before = 100MHz, \
perf_limit_reasons = 0x1C001000]
xe 0000:00:02.0: [drm] *ERROR* GT1: GuC PC Start failed
------------[ cut here ]------------
xe 0000:00:02.0: [drm] GT1: Failed to start GuC PC: -EIO
When this happens, it will block entirely the GPU to be used.
So, let's try and with a huge timeout in the hope it comes back.
Also, let's collect some information on how long it is usually
taking on situations like this, so perhaps the time can be tuned
later.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307160307.1093391-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b4b05e53b5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In a rare situation of thermal limit during resume, GuC can
be slow and run into delays like this:
xe 0000:00:02.0: [drm] GT1: excessive init time: 667ms! \
[status = 0x8002F034, timeouts = 0]
xe 0000:00:02.0: [drm] GT1: excessive init time: \
[freq = 100MHz (req = 800MHz), before = 100MHz, \
perf_limit_reasons = 0x1C001000]
xe 0000:00:02.0: [drm] *ERROR* GT1: GuC PC Start failed
------------[ cut here ]------------
xe 0000:00:02.0: [drm] GT1: Failed to start GuC PC: -EIO
When this happens, it will block entirely the GPU to be used.
So, let's try and with a huge timeout in the hope it comes back.
Also, let's collect some information on how long it is usually
taking on situations like this, so perhaps the time can be tuned
later.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307160307.1093391-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
