In the downstream IPA driver there's only one group defined for source
and destination, and the destination group doesn't have a _DPL suffix.
Fixes: b310de784b ("net: ipa: add IPA v4.7 support")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After d88f521da3 ("PCI: Allow userspace to query and set device reset
mechanism"), userspace can disable reset of specific PCI devices by writing
an empty string to the sysfs reset_method file.
However, pci_slot_resettable() does not check pci_reset_supported(), which
means that pci_reset_function() will still reset the device even if
userspace has disabled all the reset methods.
I was able to reproduce this issue with a vfio device passed to a qemu
guest, where I had disabled PCI reset via sysfs.
Add an explicit check of pci_reset_supported() in both
pci_slot_resettable() and pci_bus_resettable() to ensure both the reset
status and reset execution are bypassed if an administrator disables it for
a device.
Link: https://lore.kernel.org/r/20250207205600.1846178-1-naravamudan@nvidia.com
Fixes: d88f521da3 ("PCI: Allow userspace to query and set device reset mechanism")
Signed-off-by: Nishanth Aravamudan <naravamudan@nvidia.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Amey Narkhede <ameynarkhede03@gmail.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Firmware developers reported that Linux issues two PCIe hotplug commands in
very short intervals on an ARM server, which doesn't comply with the PCIe
spec. According to PCIe r6.1, sec 6.7.3.2, if the Command Completed event
is supported, software must wait for a command to complete or wait at
least 1 second before sending a new command.
In the failure case, the first PCIe hotplug command is from
get_port_device_capability(), which sends a command to disable PCIe hotplug
interrupts without waiting for its completion, and the second command comes
from pcie_enable_notification() of pciehp driver, which enables hotplug
interrupts again.
Fix this by only disabling the hotplug interrupts when the pciehp driver is
not enabled.
Link: https://lore.kernel.org/r/20250303023630.78397-1-feng.tang@linux.alibaba.com
Fixes: 2bd50dd800 ("PCI: PCIe: Disable PCIe port services during port initialization")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
For no apparent reason, the pci_hp_{create,remove}_module_link() helpers
live in slot.c, even though they're only called from two functions in
pci_hotplug_core.c.
Inline the helpers to reduce code size and number of exported symbols.
Link: https://lore.kernel.org/r/c207f03cfe32ae9002d9b453001a1dd63d9ab3fb.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI hotplug core contains five has_*_file() functions to determine
whether a certain sysfs file shall be added (or removed) for a given
hotplug slot.
The functions receive a struct pci_slot pointer which they have to
dereference back to a struct hotplug_slot.
Avoid by passing them a struct hotplug_slot pointer directly.
Link: https://lore.kernel.org/r/5b2f5b4ac45285953d00fd7637732a93fd40d26e.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI hotplug core contains five has_*_file() functions to determine
whether a certain sysfs file shall be added (or removed) for a given
hotplug slot.
The functions perform NULL pointer checks for the hotplug_slot and its
hotplug_slot_ops. However the callers already perform these checks:
pci_hp_register()
__pci_hp_register()
__pci_hp_initialize()
pci_hp_deregister()
pci_hp_del()
The only way to actually trigger these checks is to call pci_hp_add()
without having called pci_hp_initialize().
Amend pci_hp_add() to catch that and drop the now superfluous NULL
pointer checks in has_*_file().
Drop the same superfluous checks from pci_hp_create_module_link(),
which is (only) called from pci_hp_add().
Link: https://lore.kernel.org/r/37d1928edf8c3201a8b10794f1db3142e16e02b9.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In December 2002, historic commit
https://git.kernel.org/tglx/history/c/bec7aa00ffe5
("[PATCH] more module warning fixes")
amended the PCI hotplug core to acquire a reference on the hotplug
driver module when a sysfs attribute is accessed. That was necessary
because back in the day, sysfs code did not take any precautions to
prevent module unloading when an attribute was accessed.
Soon after in July 2003, historic commit
https://git.kernel.org/tglx/history/c/1cf6d20f6078
("[PATCH] SYSFS: add module referencing to sysfs attribute files.")
addressed that deficiency. But the commit neglected to remove the now
unnecessary reference acquisition from the PCI hotplug core.
The commit acquired a module reference for the entire duration between
open() and close() of a sysfs attribute. This made it impossible to
unload a module while attributes were kept open by user space.
That's possible today:
When a hotplug driver module is unloaded, it removes sysfs attributes of
all its hotplug slots by calling pci_hp_del(). This will wait for any
concurrent user space operation to finish:
pci_hp_del()
fs_remove_slot()
sysfs_remove_file()
sysfs_remove_file_ns()
kernfs_remove_by_name_ns()
__kernfs_remove()
kernfs_drain()
A user space operation such as read() briefly acquires a reference on
the attribute with kernfs_get_active(). kernfs_drain() waits until all
such references are released before allowing attribute removal. Once
the attribute is removed, any subsequent user space operation on a still
open attribute file will return -ENODEV.
Thus, reference acquisition by the PCI hotplug core is still unnecessary
today. So drop it at long last.
Link: https://lore.kernel.org/r/ed950fa2722967be4491146c7b867c1e7be11d37.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI hotplug core keeps a list of all registered slots. Its sole
purpose is to WARN() on slot removal if another slot is using the same
name.
But this can never happen because already on slot creation, an error is
returned and multiple messages are emitted if a slot's name is
duplicated:
pci_hp_register()
__pci_hp_register()
__pci_hp_initialize()
pci_create_slot()
kobject_init_and_add()
kobject_add_varg()
kobject_add_internal()
create_dir()
sysfs_create_dir_ns()
kernfs_create_dir_ns()
sysfs_warn_dup()
pr_warn("cannot create duplicate filename ...")
pr_err("%s failed for %s with -EEXIST, ...");
Drop the superfluous list.
Link: https://lore.kernel.org/r/603735bc50eb370bc7f1c358441ac671360bab25.1740501868.git.lukas@wunner.de
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The test shell script "set_pcie_speed.sh" is not installed in INSTALL_PATH.
Attempting to execute set_pcie_cooling_state.sh shows warning:
./set_pcie_cooling_state.sh: line 119: ./set_pcie_speed.sh: No such file or directory
Add "set_pcie_speed.sh" to TEST_PROGS.
Link: https://lore.kernel.org/r/Z8FfK8rN30lKzvVV@ly-workstation
Fixes: 838f12c3d5 ("selftests/pcie_bwctrl: Create selftests")
Signed-off-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Log pci_dbg() messages about the reset methods we attempt and any errors
(-ENOTTY means "try the next method").
Set CONFIG_DYNAMIC_DEBUG=y and enable by booting with
dyndbg="file drivers/pci/* +p" or enable at runtime:
# echo "file drivers/pci/* +p" > /sys/kernel/debug/dynamic_debug/control
Link: https://lore.kernel.org/r/20250303204220.197172-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
When you build the kernel using the llvm-19.1.4-rust-1.83.0-x86_64
toolchain provided by kernel.org with ARCH=arm64, the following symbols
are generated:
$ nm out-linux/vmlinux | grep ' _R'.*Credential | rustfilt
... T <kernel::cred::Credential>::get_secid
... T <kernel::cred::Credential as
kernel::types::AlwaysRefCounted>::dec_ref
... T <kernel::cred::Credential as
kernel::types::AlwaysRefCounted>::inc_ref
However, these Rust symbols are trivial wrappers around the functions
security_cred_getsecid, get_cred, and put_cred respectively. It doesn't
make sense to go through a trivial wrapper for these functions, so mark
them inline. Also mark other trivial methods inline to prevent similar
cases in the future.
After applying this patch, the above command will produce no output.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
[PM: subject tweak, description line trims]
Signed-off-by: Paul Moore <paul@paul-moore.com>
We have a lot of driver code that prints an error message when
registering a clk fails. Do that in the core function instead to
consolidate code. This also helps drivers avoid the anti-pattern of
accessing the struct clk_hw::init pointer after registration.
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250226235408.1339266-1-sboyd@kernel.org
In clk_calc_new_rates, the "ret" is only used to store the return value
of clk_core_determine_round_nolock, and the data type of the return
value of clk_core_determine_round_nolock is int.
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250207-correct_data_types-v1-1-f22bc7ea220d@amlogic.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
During S4 retore flow, quickspi device was resetted by driver and state
was changed to RESETTED. It is needed to be change to ENABLED state
after S4 re-initialization finished, otherwise, device will run in wrong
state and HID input data will be dropped.
Signed-off-by: Even Xu <even.xu@intel.com>
Fixes: 6912aaf3fd ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Rather than memcpy every packet that we receive from HID into our own
local fixed-size array, we can just access the data directly through
the original pointer. While we're at it, remove the few other places
that assume a fixed maximum packet size and make them dynamic (in
particular: temporary buffers created by the wacom_wac_queue_flush and
wacom_intuos_bt_process_data functions; and the pen_fifo FIFO).
To ensure pen_fifo allocation has access to the maximum used packet
length, this commit also moves the function call to occur a little
later in the probe process.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When HPD is present but has been disabled, avoid reporting HPD status
to PMF.
Cc: Pratap Nirujogi <pratap.nirujogi@amd.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Unless you know to look for it, HPD is a surprising behavior; particularly
because it can wake the system from suspend. It also has implications for
power consumption because sensors are left enabled.
After the sensors have been probed (and HPD is found present), explicitly
turn off HPD by default. Userspace can manually turn it on if desirable.
Cc: Pratap Nirujogi <pratap.nirujogi@amd.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Human presence detection (HPD) sensor uses a camera to determine when
user is physically in front of the machine. This might not be a
desirable behavior because it can (for example) cause the machine to
wake on approach.
Add a new sysfs file "hpd" that will control whether this sensor is
enabled. Use the value of this sysfs file to turn off HPD and prevent
it from re-enabling after resume from suspend.
Cc: Pratap Nirujogi <pratap.nirujogi@amd.com>
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a spelling mistake in a dev_err_once message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When a hid-steam device is removed it must clean up the client_hdev used for
intercepting hidraw access. This can lead to scheduling deferred work to
reattach the input device. Though the cleanup cancels the deferred work, this
was done before the client_hdev itself is cleaned up, so it gets rescheduled.
This patch fixes the ordering to make sure the deferred work is properly
canceled.
Reported-by: syzbot+0154da2d403396b2bd59@syzkaller.appspotmail.com
Fixes: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a spelling mistake in a literal string. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
What happens inside the individual LSMs for a given LSM hook can vary
quite a bit, so it is best to use the terminology "release" instead of
"destroy" or "free".
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
As the search for Device Control report is permissive, make sure the
desired field was actually found, before trying to set it.
Fix bitmask clearing as it was erronously using index instead of
index - 1 (HID arrays index is 1-based).
Add last two missing Device Control usages to the defined array.
PID_PAUSE and PID_CONTINUE.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
As per USB PID standard:
INFINITE - Referrers to the maximum value of a range. i.e. if in an 8
bit unsigned field the value of 255 would indicate INFINITE.
Detecting 0xffff (U16_MAX) is still important as we MIGHT get this value
as infinite from some native software as 0 was never actually defined
in Linux' FF api as the infinite value. I'm working on it though.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Ensures the loop count will never exceed the logical_maximum.
Fixes implementation errors happening when applications use the max
value of int32/DWORD as the effect iterations. This could be observed
when running software both native and in wine.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When you build the kernel using the llvm-19.1.4-rust-1.83.0-x86_64
toolchain provided by kernel.org with ARCH=arm64, the following symbols
are generated:
$ nm vmlinux | grep ' _R'.*SecurityCtx | rustfilt
... T <kernel::security::SecurityCtx>::from_secid
... T <kernel::security::SecurityCtx as core::ops::drop::Drop>::drop
However, these Rust symbols are trivial wrappers around the functions
security_secid_to_secctx and security_release_secctx respectively. It
doesn't make sense to go through a trivial wrapper for these functions,
so mark them inline. Also mark other trivial methods inline to prevent
similar cases in the future.
After applying this patch, the above command will produce no output.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
[PM: trimmed long description lines, subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9a4a5574ce ("HID: appleir: add support for Apple ir devices")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.
The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.
Fixes: 819083cb6e ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
We have two places to print "failed to set a report to ...",
use "get a report from" instead of "set a report to", it makes
people who knows less about the module to know where the error
happened.
Before:
i2c_hid_acpi i2c-FTSC1000:00: failed to set a report to device: -11
After:
i2c_hid_acpi i2c-FTSC1000:00: failed to get a report from device: -11
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
instead of printing errros as a number(%ld), it's better to print in string
format for better readability of logs.
Signed-off-by: Onkarnath <onkarnath.1@samsung.com>
Link: https://lore.kernel.org/r/20240412090749.15392-1-onkarnath.1@samsung.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In theory, this code used to return 0 if CONFIG_ACPI_PLATFORM_PROFILE was
disabled. It's not clear if that was a config which would actually boot
so we've removed the CONFIG_ACPI_PLATFORM_PROFILE ifdef. But now the
"return 0;" statement is unreachable and static checker tools complain.
Delete it and pull the else statement in a tab to silence the checker
warning and make the code a bit more clear.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Ensure that data is treated as __le32 instead of u32 before
applying le32_to_cpu.
This patch fixes the sparse warning "sparse: cast to restricted __le32".
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Signed-off-by: Vishnu Sankar <vsankar@lenovo.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501101635.qJrwAOwf-lkp@intel.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The syscon helper device_node_to_regmap() is used to fetch a regmap
registered to a device node. It also currently creates this regmap
if the node did not already have a regmap associated with it. This
should only be used on "syscon" nodes. This driver is not such a
device and instead uses device_node_to_regmap() on its own node as
a hacky way to create a regmap for itself.
This will not work going forward and so we should create our regmap
the normal way by defining our regmap_config, fetching our memory
resource, then using the normal regmap_init_mmio() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250123181913.597304-1-afd@ti.com
Tested-by: Nishanth Menon <nm@ti.com>
[sboyd@kernel.org: Drop dev_err_probe() because the mapping function
already does it]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Acer's WMI driver uses balanced-performance but AMD-PMF doesn't.
In case a machine binds with both drivers let amd-pmf use
balanced-performance as well.
Fixes: 688834743d ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When amd-pmf and asus-wmi are both bound no low power option shows
up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode
to let both bind.
Fixes: 688834743d ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When two drivers don't support all the same profiles the legacy interface
only exports the common profiles.
This causes problems for cases where one driver uses low-power but another
uses quiet because the result is that neither is exported to sysfs.
To allow two drivers to disagree, add support for "hidden choices".
Hidden choices are platform profiles that a driver supports to be
compatible with the platform profile of another driver.
Fixes: 688834743d ("ACPI: platform_profile: Allow multiple handlers")
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://lore.kernel.org/platform-driver-x86/e64b771e-3255-42ad-9257-5b8fc6c24ac9@gmx.de/T/#mc068042dd29df36c16c8af92664860fc4763974b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Any rules using engine matching are currently broken due RTP processing
happening too in early init, before the list of hardware engines has been
initialised.
Fix this by moving workaround processing to later in the driver probe
sequence, to just before the processed list is used for the first time.
Looking at the debugfs gt0/workarounds on ADL-P we notice 14011060649
should be present while we see, before:
GT Workarounds
14011059788
14015795083
And with the patch:
GT Workarounds
14011060649
14011059788
14015795083
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-2-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 25d434cef7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we just leave it uninitialised, which at first looks harmless,
however we also don't zero out the pfn array, and with pfn_flags_mask
the idea is to be able set individual flags for a given range of pfn or
completely ignore them, outside of default_flags. So here we end up with
pfn[i] & pfn_flags_mask, and if both are uninitialised we might get back
an unexpected flags value, like asking for read only with default_flags,
but getting back write on top, leading to potentially bogus behaviour.
To fix this ensure we zero the pfn_flags_mask, such that hmm only
considers the default_flags and not also the initial pfn[i] value.
v2 (Thomas):
- Prefer proper initializer.
Fixes: 81e058a3e7 ("drm/xe: Introduce helper to populate userptr")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226174748.294285-2-matthew.auld@intel.com
(cherry picked from commit dd8c01e42f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 15bccbfb78)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a815362752 ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 2218704997)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make __per_cpu_hot_end marker point to the end of the percpu cache
hot data, not to the end of the percpu cache hot section.
This fixes CONFIG_MPENTIUM4 case where X86_L1_CACHE_SHIFT
is set to 7 (128 bytes).
Also update assert message accordingly.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Link: https://lore.kernel.org/r/20250304173455.89361-1-ubizjak@gmail.com
Closes: https://lore.kernel.org/lkml/Z8a-NVJs-pm5W-mG@gmail.com/
