Instead of acquiring the namespace semaphore and the mount lock
everytime we close a file with FMODE_NEED_UNMOUNT set add a fastpath
that checks whether we need to at all. Most of the time the caller will
have attached the mount to the filesystem hierarchy and there's nothing
to do.
Link: https://lore.kernel.org/r/20250221-brauner-open_tree-v1-4-dbcfcb98c676@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
PC speaker works well on this platform in BIOS and in Linux until sound
card drivers are loaded. Then it stops working.
There seems to be a beep generator node at 0x1a in this CODEC
(ALC269_TYPE_ALC215) but it seems to be only connected to capture mixers
at nodes 0x22 and 0x23.
If I unmute the mixer input for 0x1a at node 0x23 and start recording
from its "ALC285 Analog" capture device I can clearly hear beeps in that
recording.
So the beep generator is indeed working properly, however I wasn't able to
figure out any way to connect it to speakers.
However, the bits in the "Passthrough Control" register (0x36) seems to
work at least partially: by zeroing "B" and "h" and setting "S" I can at
least make the PIT PC speaker output appear either in this laptop speakers
or headphones (depending on whether they are connected or not).
There are some caveats, however:
* If the CODEC gets runtime-suspended the beeps stop so it needs HDA beep
device for keeping it awake during beeping.
* If the beep generator node is generating any beep the PC beep passthrough
seems to be temporarily inhibited, so the HDA beep device has to be
prevented from using the actual beep generator node - but the beep device
is still necessary due to the previous point.
* In contrast with other platforms here beep amplification has to be
disabled otherwise the beeps output are WAY louder than they were on pure
BIOS setup.
Unless someone (from Realtek probably) knows how to make the beep generator
node output appear in speakers / headphones using PC beep passthrough seems
to be the only way to make PC speaker beeping actually work on this
platform.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: kailang@realtek.com
Link: https://patch.msgid.link/7461f695b4daed80f2fc4b1463ead47f04f9ad05.1739741254.git.mail@maciej.szmigiero.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If a user calls p = kmalloc(1024); kfree(p); kfree(p); and 'p' was the
only object in the slab, we may free the slab after the first call to
kfree(). If we do, we clear PGTY_slab and the second call to kfree()
will call free_large_kmalloc(). That will leave a trace in the logs
("object pointer: 0x%p"), but otherwise proceed to free the memory,
which is likely to corrupt the page allocator's metadata.
Allocate a new page type for large kmalloc and mark the memory with it
while it's allocated. That lets us detect this double-free and return
without harming any data structures.
Reported-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add a test_kfree_rcu_wq_destroy test to verify a kmem_cache_destroy()
from a workqueue context. The problem is that, before destroying any
cache the kvfree_rcu_barrier() is invoked to guarantee that in-flight
freed objects are flushed.
The _barrier() function queues and flushes its own internal workers
which might conflict with a workqueue type a kmem-cache gets destroyed
from.
One example is when a WQ_MEM_RECLAIM workqueue is flushing !WQ_MEM_RECLAIM
events which leads to a kernel splat. See the check_flush_dependency() in
the workqueue.c file.
If this test does not emits any kernel warning, it is passed.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
slab_err() has variadic printf arguments but instead of passing them to
slab_bug() it does vsnprintf() to a buffer and passes %s, buf.
To allow passing them directly, turn slab_bug() to __slab_bug() with a
va_list parameter, and slab_bug() a wrapper with fmt, ... parameters.
Then slab_err() can call __slab_bug() without the intermediate buffer.
Also constify fmt everywhere, which also simplifies object_err()'s
call to slab_bug().
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
If a slab object is corrupted or an error occurs in its internal
validation, continuing after restoration may cause other side effects.
At this point, it is difficult to debug because the problem occurred in
the past. It is useful to use WARN() to catch errors at the point of
issue because WARN() could trigger panic for system debugging when
panic_on_warn is enabled. WARN() is added where to detect the error on
slab_err and object_err.
It makes sense to only do the WARN() after printing the logs. slab_err
is splited to __slab_err that calls the WARN() and it is called after
printing logs.
Signed-off-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Previously, the restore occurred after printing the object in slub.
After commit 47d911b02c ("slab: make check_object() more consistent"),
the bytes are printed after the restore. This information about the bytes
before the restore is highly valuable for debugging purpose.
For instance, in a event of cache issue, it displays byte patterns
by breaking them down into 64-bytes units. Without this information,
we can only speculate on how it was broken. Hence the corrupted regions
should be printed prior to the restoration process. However if an object
breaks in multiple places, the same log may be output multiple times.
Therefore the slub log is reported only once to prevent redundant printing,
by sending a parameter indicating whether an error has occurred previously.
Signed-off-by: Hyesoo Yu <hyesoo.yu@samsung.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
As revealed by this writeup[1], due to the fact that __kmalloc_node (now
renamed to __kmalloc_node_noprof) is an exported symbol and will never
get inlined, using it in kvmalloc_node (now is __kvmalloc_node_noprof)
would make the RET_IP inside always point to the same address:
upper_caller
kvmalloc
kvmalloc_node
kvmalloc_node_noprof
__kvmalloc_node_noprof <-- all macros all the way down here
__kmalloc_node_noprof
__do_kmalloc_node(.., _RET_IP_)
... <-- _RET_IP_ points to
That literally means all kmalloc invoked via kvmalloc would use the same
seed for cache randomization (CONFIG_RANDOM_KMALLOC_CACHES), which makes
this hardening non-functional.
The root cause of this problem, IMHO, is that using RET_IP only cannot
identify the actual allocation site in case of kmalloc being called
inside non-inlined wrappers or helper functions. And I believe there
could be similar cases in other functions. Nevertheless, I haven't
thought of any good solution for this. So for now let's solve this
specific case first.
For __kvmalloc_node_noprof, replace __kmalloc_node_noprof and call
__do_kmalloc_node directly instead, so that RET_IP can take the return
address of kvmalloc and differentiate each kvmalloc invocation:
upper_caller
kvmalloc
kvmalloc_node
kvmalloc_node_noprof
__kvmalloc_node_noprof <-- all macros all the way down here
__do_kmalloc_node(.., _RET_IP_)
... <-- _RET_IP_ points to
Thanks to Tamás Koczka for the report and discussion!
Link: 908d59b573/pocs/linux/kernelctf/CVE-2024-27397_mitigation/docs/exploit.md (L259) [1]
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Move __kvmalloc_node_noprof (as well as kvfree*, kvrealloc_noprof and
kmalloc_gfp_adjust for consistency) into mm/slub.c so that it can
directly invoke __do_kmalloc_node, which is needed for the next patch.
No functional changes intended.
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
SLUB is the only remaining allocator. We can therefore get rid of
the logic for allocator-specific flags:
* Merge SLAB_CACHE_FLAGS into SLAB_CORE_FLAGS.
* Remove CACHE_CREATE_MASK and instead mask out SLAB_DEBUG_FLAGS if
!CONFIG_SLUB_DEBUG. SLAB_DEBUG_FLAGS is now defined
unconditionally (no impact on existing code, which ignores it if
!CONFIG_SLUB_DEBUG).
* Define SLAB_FLAGS_PERMITTED in terms of SLAB_CORE_FLAGS and
SLAB_DEBUG_FLAGS (no functional change).
While at it also remove misleading comments that suggest that
multiple allocators are available.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Since commit 9d846b1aeb ("gpiolib: check the return value of
gpio_chip::get_direction()") we check the return value of the
get_direction() callback as per its API contract. This driver returns
-EINVAL if the pin in question is set to one of the alternative
(non-GPIO) functions. This isn't really an error that should be
communicated to GPIOLIB so default to returning the "safe" value of
INPUT in this case. The GPIO subsystem does not have the notion of
"unknown" direction.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/Z7VFB1nST6lbmBIo@finisterre.sirena.org.uk/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/20250219102750.38519-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add gpio and pinctrl support for the 5 GPIO banks on RK3528.
Signed-off-by: Steven Liu <steven.liu@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/20250228064024.3200000-4-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After phy initialization, some phy operations can only be executed while
in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and
GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking
phy ops.
Previously the SUSPENDENABLE bits are only set after the controller
initialization, which may not happen right away if there's no gadget
driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits
only when there's mode switching (change in GCTL.PRTCAPDIR).
Fixes: 6d73572206 ("usb: dwc3: core: Prevent phy suspend during init")
Cc: stable <stable@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the WiFi/BT nodes for QCP and describe the regulators for the WCN7850
combo chip using the new power sequencing bindings. All voltages are
derived from chained fixed regulators controlled using a single GPIO.
The same setup also works for CRD (and likely most of the other X1E80100
laptops). However, unlike the QCP they use soldered or removable M.2 cards
supplied by a single 3.3V fixed regulator. The other necessary voltages are
then derived inside the M.2 card. Describing this properly requires
new bindings, so this commit only adds QCP for now.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250217-x1e80100-pwrseq-qcp-v3-1-a0525cc01666@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add RPMh stats to read low power statistics for various subsystem
and SoC sleep modes.
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # 8750 QRD
Link: https://lore.kernel.org/r/20250218-sm8750_stats-v1-1-8902e213f82d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There should be exactly one space before and after '=', and one space
before '{'. No functional impact. Verified with comparing decompiled
DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219090751.124267-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DTS coding style expects labels to be lowercase. No functional impact.
Verified with comparing decompiled DTB (dtx_diff and fdtdump+diff).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250219090751.124267-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Set the paths where the device-specific firmware can be found for this
device.
Fairphone 3 was shipped with secure-boot off so any testkey-signed
firmware is accepted.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250222-fp3-remoteprocs-firmware-v1-3-237ed21c334a@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Command DB is a database in the shared memory of QCOM SoCs, that
provides a mapping between resource key and the resource address for a
system resource managed by a remote processor. The data is stored in a
shared memory region and is loaded by the remote processor. Therefore,
enabling Command DB ensures that those resources function properly.
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250221-add_command_db_support-v1-1-d60acbf913aa@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-13-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-12-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-11-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath11k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-10-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-9-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-8-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-7-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-6-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-5-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-4-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-3-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-2-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The property qcom,ath10k-calibration-variant was deprecated in favor of
recently introduced generic qcom,calibration-variant, common to all
Qualcomm Atheros WiFi bindings.
Change will affect out of tree users, like other projects, of this DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250225-dts-qcom-wifi-calibration-v1-1-347e9c72dcfc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-5-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-4-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When no link frequencies are set, msm/dp driver defaults to HBR2 speed.
Explicitly list supported frequencies including HBR3/8.1Gbps for all
external DisplayPort(s).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-3-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Particular laptops comes with two USB Type-C ports, both supporting DP
alt mode. Enable output on both of them. Explicitly list supported
frequencies including HBR3/8.1Gbps for all external DisplayPort(s).
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
Derived from:
arm64: dts: qcom: x1e80100-t14s: Add external DP support
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226231436.16138-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Initially added, the cma heap was supposed to help with libcamera swisp,
however a mistake was made such that the node was never applied as part
of the overlay since the change was added to the overlay root ("/") and
not with a reference to the target dtb root ("&{/}"). Moveover libcamera
doesn't require CMA heap on Qualcomm platforms anymore as it can now use
UDMA buffers instead.
Drop the CMA heap node. This change has no effect on the final dtb.
This reverts commit d40fd02c1f.
Fixes: d40fd02c1f ("arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support")
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250227-qcom-nonroot-overlays-v2-2-bde44f708cbe@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
