There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
While at it, sort the IDs alphabetically.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There shall be no comma after the terminator entry and initializing
fields with 0 for statically defined structs is redundant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250226112612.166989-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
nft_ct_pcpu_template is a per-CPU variable and relies on disabled BH for its
locking. The refcounter is read and if its value is set to one then the
refcounter is incremented and variable is used - otherwise it is already
in use and left untouched.
Without per-CPU locking in local_bh_disable() on PREEMPT_RT the
read-then-increment operation is not atomic and therefore racy.
This can be avoided by using unconditionally __refcount_inc() which will
increment counter and return the old value as an atomic operation.
In case the returned counter is not one, the variable is in use and we
need to decrement counter. Otherwise we can use it.
Use __refcount_inc() instead of read and a conditional increment.
Fixes: edee4f1e92 ("netfilter: nft_ct: add zone id set support")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
During enabling FBC, for the very first frame, the prepare dirty
rect routine wouldnt have executed as at that time the plane
reference in the fbc_state would be NULL. So this could make
driver program some invalid entries as the damage area. Though
fbc hw ignores the dirty rect values programmed for the first
frame after enabling FBC, driver must ensure that valid dirty
rect coords are programmed. So ensure that for the first frame
correct dirty rect coords are updated to the HW.
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-10-vinod.govindapillai@intel.com
It is not recommended to have both FBC dirty rect and PSR2
selective fetch be enabled at the same time. Mark FBC as not
possible, if PSR2 selective fetch is enabled.
v2: fix the condition to disable FBC if PSR2 enabled (Jani)
v3: use HAS_FBC_DIRTY_RECT()
v4: Update to patch description
Bspec: 68881
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-9-vinod.govindapillai@intel.com
Dirty rectangle feature allows FBC to recompress a subsection
of a frame. When this feature is enabled, display will read
the scan lines between dirty rectangle start line and dirty
rectangle end line in subsequent frames.
Use the merged damage clip stored in the plane state to
configure the FBC dirty rect areas.
v2: - Move dirty rect handling to fbc state (Ville)
v3: - Use intel_fbc_dirty_rect_update_noarm (Ville)
- Split plane damage collection and dirty rect preparation
- Handle case where dirty rect fall outside the visible region
v4: - A state variable to check if we need to update dirty rect
registers in case intel_fbc_can_flip_nuke() (Ville)
v5: - No need to use a separate valid flag, updates to the
conditions for prepare damage rect (Ville)
- Usage of locks in fbc dirty rect related functions (Ville)
v6: - updates dirty rect handling (Ville)
v7: - Loop through all planes in atomic state is good enough (Ville)
Bspec: 68881, 71675, 73424
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-8-vinod.govindapillai@intel.com
If FBC is already active, we don't need to call FBC activate
routine again unless there are changes to the fences. So skip
this on all platforms that don't have fences. Any FBC register
updates done after enabling the dirty rect support in xe3 will
trigger nuke by FBC which is counter productive to the fbc
dirty rect feature.
The front buffer rendering sequence will call intel_fbc_flush()
and which will call intel_fbc_nuke() or intel_fbc_activate()
based on FBC status explicitly and won't get impacted by this
change.
v2: use HAS_FBC_DIRTY_RECT()
move this functionality within intel_fbc_activate()
v3: update to intel_fbc_activate logic (Ville)
update to the patch description
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-7-vinod.govindapillai@intel.com
Introduce a macro to check if the platform supports FBC dirty
rect capability.
v2: - update to the patch subject
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-6-vinod.govindapillai@intel.com
Userspace can pass damage area clips per plane to track
changes in a plane and some display components can utilze
these damage clips for efficiently handling use cases like
FBC, PSR etc. A merged damage area is generated and its
coordinates are updated relative to viewport and HW and
stored in the plane_state. This merged damage areas will be
used for FBC dirty rect support in xe3 in the follow-up
patch.
Big thanks to Ville Syrjala for his contribuitions in shaping
up of this series.
v1: - Move damage_merged helper to cover bigjoiner case and use
the correct plane state for damage find helper (Ville)
- Damage handling code under HAS_FBC_DIRTY_RECT() so the
the related part will be executed only for xe3+
- Changed dev_priv to i915 in one of the functions
v2: - damage reported is stored in the plane state after coords
adjustmentments irrespective of fbc dirty rect support.
- Damage to be empty in case of plane not visible (Ville)
- Handle fb could be NULL and plane not visible cases (Ville)
v3: - No need to empty damage in case disp ver < 12 (Ville)
- update to the patch subject
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-4-vinod.govindapillai@intel.com
Add a const qualifier for the "state" parameter as well as we could
use this helper to get the combined damage in cases of const
drm_plane_state as well. Needed mainly for xe driver big joiner cases
where we need to track the damage from immutable plane state.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-3-vinod.govindapillai@intel.com
Since pm_runtime_force_resume() requires pm_runtime_force_suspend() to
be called before it on the same device, the runtime PM status of the
device is RPM_SUSPENDED when it is called unless the device's runtime
PM status is changed somewhere else in the meantime.
However, even if that happens, the power.needs_force_resume
check is still required to pass and that flag is only set by
pm_runtime_force_suspend() once and it is cleared at the end of
pm_runtime_force_resume(), so it cannot be taken into account
twice in a row.
According to the above, the pm_runtime_status_suspended(dev) check in
pm_runtime_force_resume() is redundant, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2309120.iZASKD2KPV@rjwysocki.net
The module parameter defines number of iso packets per one URB. User is
allowed to set any value to the parameter of type int, which can lead to
various kinds of weird and incorrect behavior like integer overflows,
truncations, etc. Number of packets should be a small non-negative number.
Since this parameter is read-only, its value can be validated on driver
probe.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250303100413.835-1-m.masimov@mt-integration.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on the dmesg messages from the original reporter:
[ 4.964073] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
[ 4.964083] thinkpad_acpi: Error probing battery 2
Lenovo ThinkPad X131e also needs this battery quirk.
Reported-by: Fan Yang <804284660@qq.com>
Tested-by: Fan Yang <804284660@qq.com>
Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250221164825.77315-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Volume buttons on Microsoft Surface Go 4 tablet didn't send any events.
Add Surface Go 4 DMI match to button_array_table to fix this.
Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250220154016.3620917-1-dmitry@d-systems.ee
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove needless 'return' in the following void APIs:
__pm_wakeup_event()
pm_wakeup_event()
pm_wakeup_hard_event()
Since both the API and callee involved are void functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20250221-rmv_return-v1-14-cc8dff275827@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, if power.no_callbacks is set, device_prepare() will also set
power.direct_complete for the device. If power.direct_complete is set
in device_resume(), the clearing of power.is_prepared will be skipped
and if new children appear under the device at that point, a warning
will be printed.
After commit (f76b168b6f PM: Rename dev_pm_info.in_suspend to
is_prepared), power.is_prepared is generally cleared in device_resume()
before invoking the resume callback for the device which allows that
callback to add new children without triggering the warning, but this
does not happen for devices with power.direct_complete set.
This problem is visible in USB where usb_set_interface() can be called
before device_complete() clears power.is_prepared for interface devices
and since ep devices are added then, the warning is printed:
usb 1-1: reset high-speed USB device number 3 using ci_hdrc
ep_81: PM: parent 1-1:1.1 should not be sleeping
PM: resume devices took 0.936 seconds
Since it is legitimate to add the ep devices at that point, the
warning above is not particularly useful, so get rid of it by
clearing power.is_prepared in device_resume() for devices with
power.direct_complete set if they have no PM callbacks, in which
case they need not actually resume for the new children to work.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20250224070049.3338646-1-xu.yang_2@nxp.com
[ rjw: New subject, changelog edits, rephrased new code comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add an optimization (on top of previous changes) to avoid calling
pm_runtime_blocked(), which involves acquiring the device's PM spinlock,
for devices with no PM callbacks and runtime PM "blocked".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2978873.e9J7NaK4W3@rjwysocki.net
When firmware traces are enabled, the firmware dumps 48-bit timestamps
for each trace as two 32-bit values, highest 32 bits (of which only 16
useful) first.
The driver was reassembling them the other way round i.e. interpreting
the first value in memory as the lowest 32 bits, and the second value
as the highest 32 bits (then truncated to 16 bits).
Due to this, firmware trace dumps showed very large timestamps even for
traces recorded shortly after GPU boot. The timestamps in these dumps
would also sometimes jump backwards because of the truncation.
Example trace dumped after loading the powervr module and enabling
firmware traces, where each line is commented with the timestamp value
in hexadecimal to better show both issues:
[93540092739584] : Host Sync Partition marker: 1 // 0x551300000000
[28419798597632] : GPU units deinit // 0x19d900000000
[28548647616512] : GPU deinit // 0x19f700000000
Update logic to reassemble the timestamps halves in the correct order.
Fixes: cb56cd6108 ("drm/imagination: Add firmware trace to debugfs")
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221-fix-fw-trace-timestamps-v1-1-dba4aeb030ca@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Commit 467f432a52 ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
[42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028
[42021.814463] #PF: supervisor read access in kernel mode
[42021.819549] #PF: error_code(0x0000) - not-present page
[42021.824636] PGD 0 P4D 0
[42021.827145] Oops: 0000 [#1] SMP PTI
[42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX
[42021.841697] Hardware name: XXX
[42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48
[42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287
[42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000
[42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0
[42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000
[42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530
[42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000
[42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000
[42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0
[42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[42021.949324] Call Trace:
[42021.951756] <TASK>
[42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70
[42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0
[42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0
[42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0
[42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30
[42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core]
[42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50
[42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0
[42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410
[42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0
[42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0
[42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0
[42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters
Fixes: 467f432a52 ("RDMA/core: Split port and device counter sysfs attributes")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maher Sanalla <msanalla@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://patch.msgid.link/20250227165420.3430301-1-roman.gushchin@linux.dev
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32c(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20250227051207.19470-1-ebiggers@kernel.org
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When the size of a transfer exceeds the size of the FIFO (32 bytes), RX
overflows will be generated and receive data will be corrupted and
warnings will be produced. For example, here's an error generated by a
transfer of 36 bytes:
spi_master spi0: mchp_corespi_interrupt: RX OVERFLOW: rxlen: 4, txlen: 0
The driver is currently split between handling receiving in the
interrupt handler, and sending outside of it. Move all handling out of
the interrupt handling, and explicitly link the number of bytes read of
of the RX FIFO to the number written into the TX one. This both resolves
the overflow problems as well as simplifying the flow of the driver.
CC: stable@vger.kernel.org
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250303-veal-snooper-712c1dfad336@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid a warning from drm_gem_gpuva_assert_lock_held in drm_gpuva_unlink.
The Imagination driver uses the GEM object reservation lock to protect
the gpuva list, but the GEM object was not always known in the code
paths that ended up calling drm_gpuva_unlink. When the GEM object isn't
known, it is found by calling drm_gpuva_find to lookup the object
associated with a given virtual address range, or by calling
drm_gpuva_find_first when removing all mappings.
Cc: stable@vger.kernel.org
Fixes: 4bc736f890 ("drm/imagination: vm: make use of GPUVM's drm_exec helper")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-hold-drm_gem_gpuva-lock-for-unmap-v2-1-3fdacded227f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Do scheduler queue fence release processing on a workqueue, rather
than in the release function itself.
Fixes deadlock issues such as the following:
[ 607.400437] ============================================
[ 607.405755] WARNING: possible recursive locking detected
[ 607.415500] --------------------------------------------
[ 607.420817] weston:zfq0/24149 is trying to acquire lock:
[ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr]
[ 607.436728]
but task is already holding lock:
[ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554
[ 607.451727]
other info that might help us debug this:
[ 607.458245] Possible unsafe locking scenario:
[ 607.464155] CPU0
[ 607.466601] ----
[ 607.469044] lock(reservation_ww_class_mutex);
[ 607.473584] lock(reservation_ww_class_mutex);
[ 607.478114]
*** DEADLOCK ***
Cc: stable@vger.kernel.org
Fixes: eaf01ee5ba ("drm/imagination: Implement job submission and scheduling")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226-fence-release-deadlock-v2-1-6fed2fc1fe88@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Change the default value of spectre v2 in user mode to respect the
CONFIG_MITIGATION_SPECTRE_V2 config option.
Currently, user mode spectre v2 is set to auto
(SPECTRE_V2_USER_CMD_AUTO) by default, even if
CONFIG_MITIGATION_SPECTRE_V2 is disabled.
Set the spectre_v2 value to auto (SPECTRE_V2_USER_CMD_AUTO) if the
Spectre v2 config (CONFIG_MITIGATION_SPECTRE_V2) is enabled, otherwise
set the value to none (SPECTRE_V2_USER_CMD_NONE).
Important to say the command line argument "spectre_v2_user" overwrites
the default value in both cases.
When CONFIG_MITIGATION_SPECTRE_V2 is not set, users have the flexibility
to opt-in for specific mitigations independently. In this scenario,
setting spectre_v2= will not enable spectre_v2_user=, and command line
options spectre_v2_user and spectre_v2 are independent when
CONFIG_MITIGATION_SPECTRE_V2=n.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Kaplan <David.Kaplan@amd.com>
Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-2-b7ff1dab840e@debian.org
There is a helper function to check if SMT is available. Use this helper
instead of performing the check manually.
The helper function cpu_smt_possible() does exactly the same thing as
was being done manually inside spectre_v2_user_select_mitigation().
Specifically, it returns false if CONFIG_SMP is disabled, otherwise
it checks the cpu_smt_control global variable.
This change improves code consistency and reduces duplication.
No change in functionality intended.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: David Kaplan <David.Kaplan@amd.com>
Link: https://lore.kernel.org/r/20241031-x86_bugs_last_v2-v2-1-b7ff1dab840e@debian.org
In the interest of limiting the display dependencies on i915 core
headers, split out i915_gtt_view_types.h from i915_vma_types.h, and only
include the new header from intel_display_types.h.
Reuse the new header from xe compat code too, failing build if partial
view is used in display code.
Side note: Why would we ever have set enum i915_gtt_view_type values to
size of each type?! What an insane hack.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb31885c32dbddad76d634c6fdb98a73b546b42e.1740412806.git.jani.nikula@intel.com
With the primary goal of removing #include "i915_vma.h" from
intel_display_types.h, move intel_plane_ggtt_offset() to a proper
function in intel_atomic_plane.c. This reveals tons of implicit
dependencies all over the place that we pulled in via i915_vma.h. Fix
the fallout.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70ac6d19518f355abf37ac8c4b0f1d18878be28c.1740412806.git.jani.nikula@intel.com
These result in a very small reduction in driver size, but at the cost
of more complex build and slightly harder to read code. In the case of
of_match_ptr() it also prevents use of PRP0001 ACPI based identification.
In this particular case we have a valid ACPI/PNP ID that should be used
in preference to PRP0001 but doesn't mean we should prevent that route.
With this done, drop unneeded of*.h inclusions and __maybe_unused markers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225100838.362125-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Retpoline mitigation for spectre-v2 uses thunks for indirect branches. To
support this mitigation compilers add a CS prefix with
-mindirect-branch-cs-prefix. For an indirect branch in asm, this needs to
be added manually.
CS prefix is already being added to indirect branches in asm files, but not
in inline asm. Add CS prefix to CALL_NOSPEC for inline asm as well. There
is no JMP_NOSPEC for inline asm.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-2-96599fed0f33@linux.intel.com
CALL_NOSPEC macro is used to generate Spectre-v2 mitigation friendly
indirect branches. At compile time the macro defaults to indirect branch,
and at runtime those can be patched to thunk based mitigations.
This approach is opposite of what is done for the rest of the kernel, where
the compile time default is to replace indirect calls with retpoline thunk
calls.
Make CALL_NOSPEC consistent with the rest of the kernel, default to
retpoline thunk at compile time when CONFIG_MITIGATION_RETPOLINE is
enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-1-96599fed0f33@linux.intel.com
`cb_mutex` was introduced in commit 9e0894d070 ("platform/x86/amd/pmf:
Enable Custom BIOS Inputs for PMF-TA") to prevent conccurrent access for
BIOS inputs. It however isn't initialized and so on use it may lead to
a NULL pointer dereference.
Add code to initialize on probe and clean up on destroy.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Cc: Richard Gong <richgong@amd.com>
Fixes: 9e0894d070 ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250227170308.435862-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
