Add health property, which checks that temperature, voltage and current are
within limits for the battery. Limits can be programmed in non-volatile
memory.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20250204-max1720x_health-v1-1-97ebbe4a0bc5@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The FIFO depth specified with the compatibles's data is used where all
the instances of the IP define the same FIFO depth. It naturally has
higher precedence than the FIFO depth specified via DT. Specifying FIFO
depth in DT becomes superfluous in this case. Extend comment about
compatible's FIFO depth.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://patch.msgid.link/20250214-spi-s3c64xx-fifo-depth-v1-1-e1b1915e3ee7@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The char pointers in 'struct cs_dsp_mock_coeff_def' are expected to
point to C strings. They need to be terminated by a null byte.
However the code does not allocate that trailing null byte and only
works if by chance the allocation is followed by such a null byte.
Refactor the repeated string allocation logic into a new helper which
makes sure the terminating null is always present.
It also makes the code more readable.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Fixes: 83baecd92e ("firmware: cs_dsp: Add KUnit testing of control parsing")
Cc: stable@vger.kernel.org
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250211-cs_dsp-kunit-strings-v1-1-d9bc2035d154@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Re-use the adsp2 test cases for the Halo Core test run. Before this the
Halo Core kunit_case array was an empty placeholder.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250219152132.1285941-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kprobe_multi feature was disabled on ARM64 due to the lack of fprobe
support.
The fprobe rewrite on function_graph has been recently merged and thus
brought support for fprobes on arm64. This then enables kprobe_multi
support on arm64, and so the corresponding tests can now be run on this
architecture.
Remove the tests depending on kprobe_multi from DENYLIST.aarch64 to
allow those to run in CI. CONFIG_FPROBE is already correctly set in
tools/testing/selftests/bpf/config
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250219-enable_kprobe_multi_tests-v1-1-faeec99240c8@bootlin.com
Just wrap the direct err with libbpf_err, keep consistency
with other APIs.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250219153711.29651-1-chen.dylane@linux.dev
The "shpchp_debug" module parameter is used to enable debug logging. The
generic ability to turn on/off debug prints dynamically covers this use
case already so there is no need for module specific debug handling. The
ctrl_dbg() wrapper also uses a low-level pci_printk() despite always using
KERN_DEBUG level.
Remove "shpchp_debug" parameter and convert ctrl_dbg() to use pci_dbg().
From now on, shpchp can be debugged using the normal dynamic debugger by
setting CONFIG_DYNAMIC_DEBUG=y and then either adding to kernel cmdline:
dyndbg="file drivers/pci/hotplug/shpchp* +p"
or using this command on a running kernel:
echo 'file drivers/pci/hotplug/shpchp* +p' > /sys/kernel/debug/dynamic_debug/control
Link: https://lore.kernel.org/r/20250217095550.2789-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The shpchp hotplug driver defines logging wrapper with generic names which
are just duplicates of existing generic printk() wrappers. They are also
unused so remove them.
Link: https://lore.kernel.org/r/20250217095550.2789-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
syzbot reports that hex_dump_to_buffer is using uninit-value:
=====================================================
BUG: KMSAN: uninit-value in hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171
hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171
print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276
diFree+0x5ba/0x4350 fs/jfs/jfs_imap.c:876
jfs_evict_inode+0x510/0x550 fs/jfs/inode.c:156
evict+0x723/0xd10 fs/inode.c:796
iput_final fs/inode.c:1946 [inline]
iput+0x97b/0xdb0 fs/inode.c:1972
txUpdateMap+0xf3e/0x1150 fs/jfs/jfs_txnmgr.c:2367
txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline]
jfs_lazycommit+0x627/0x11d0 fs/jfs/jfs_txnmgr.c:2733
kthread+0x6b9/0xef0 kernel/kthread.c:464
ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4121 [inline]
slab_alloc_node mm/slub.c:4164 [inline]
__kmalloc_cache_noprof+0x8e3/0xdf0 mm/slub.c:4320
kmalloc_noprof include/linux/slab.h:901 [inline]
diMount+0x61/0x7f0 fs/jfs/jfs_imap.c:105
jfs_mount+0xa8e/0x11d0 fs/jfs/jfs_mount.c:176
jfs_fill_super+0xa47/0x17c0 fs/jfs/super.c:523
get_tree_bdev_flags+0x6ec/0x910 fs/super.c:1636
get_tree_bdev+0x37/0x50 fs/super.c:1659
jfs_get_tree+0x34/0x40 fs/jfs/super.c:635
vfs_get_tree+0xb1/0x5a0 fs/super.c:1814
do_new_mount+0x71f/0x15e0 fs/namespace.c:3560
path_mount+0x742/0x1f10 fs/namespace.c:3887
do_mount fs/namespace.c:3900 [inline]
__do_sys_mount fs/namespace.c:4111 [inline]
__se_sys_mount+0x71f/0x800 fs/namespace.c:4088
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4088
x64_sys_call+0x39bf/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
=====================================================
The reason is that imap is not properly initialized after memory
allocation. It will cause the snprintf() function to write uninitialized
data into linebuf within hex_dump_to_buffer().
Fix this by using kzalloc instead of kmalloc to clear its content at the
beginning in diMount().
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Reported-by: syzbot+df6cdcb35904203d2b6d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/67b5d07e.050a0220.14d86d.00e6.GAE@google.com/
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
We had some error handling confusion here;
-BCH_ERR_missing_indirect_extent is thrown by
trans_trigger_reflink_p_segment(); at this point we haven't decide
whether we're generating an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
During the "size_check" label in ea_get(), the code checks if the extended
attribute list (xattr) size matches ea_size. If not, it logs
"ea_get: invalid extended attribute" and calls print_hex_dump().
Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds
INT_MAX (2,147,483,647). Then ea_size is clamped:
int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr));
Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper
limit is treated as an int, causing an overflow above 2^31 - 1. This leads
"size" to wrap around and become negative (-184549328).
The "size" is then passed to print_hex_dump() (called "len" in
print_hex_dump()), it is passed as type size_t (an unsigned
type), this is then stored inside a variable called
"int remaining", which is then assigned to "int linelen" which
is then passed to hex_dump_to_buffer(). In print_hex_dump()
the for loop, iterates through 0 to len-1, where len is
18446744073525002176, calling hex_dump_to_buffer()
on each iteration:
for (i = 0; i < len; i += rowsize) {
linelen = min(remaining, rowsize);
remaining -= rowsize;
hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
linebuf, sizeof(linebuf), ascii);
...
}
The expected stopping condition (i < len) is effectively broken
since len is corrupted and very large. This eventually leads to
the "ptr+i" being passed to hex_dump_to_buffer() to get closer
to the end of the actual bounds of "ptr", eventually an out of
bounds access is done in hex_dump_to_buffer() in the following
for loop:
for (j = 0; j < len; j++) {
if (linebuflen < lx + 2)
goto overflow2;
ch = ptr[j];
...
}
To fix this we should validate "EALIST_SIZE(ea_buf->xattr)"
before it is utilised.
Reported-by: syzbot <syzbot+4e6e7e4279d046613bc5@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+4e6e7e4279d046613bc5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=4e6e7e4279d046613bc5
Fixes: d9f9d96136 ("jfs: xattr: check invalid xattr size more strictly")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
When not running in VHE mode, cpu_prepare_hyp_mode() computes the value
of TCR_EL2 using the host's TCR_EL1 settings as a starting point. For
nVHE, this amounts to masking out everything apart from the TG0, SH0,
ORGN0, IRGN0 and T0SZ fields before setting the RES1 bits, shifting the
IPS field down to the PS field and setting DS if LPA2 is enabled.
Unfortunately, for hVHE, things go slightly wonky: EPD1 is correctly set
to disable walks via TTBR1_EL2 but then the T1SZ and IPS fields are
corrupted when we mistakenly attempt to initialise the PS and DS fields
in their E2H=0 positions. Furthermore, many fields are retained from
TCR_EL1 which should not be propagated to TCR_EL2. Notably, this means
we can end up with A1 set despite not initialising TTBR1_EL2 at all.
This has been shown to cause unexpected translation faults at EL2 with
pKVM due to TLB invalidation not taking effect when running with a
non-zero ASID.
Fix the TCR_EL2 initialisation code to set PS and DS only when E2H=0,
masking out HD, HA and A1 when E2H=1.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Fixes: ad744e8cb3 ("arm64: Allow arm64_sw.hvhe on command line")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250214133724.13179-1-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add the MAINTAINERS entries for the driver
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-z2-v6-4-c2115d6e5a8f@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adds a driver for Apple touchscreens using the Z2 protocol.
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-z2-v6-2-c2115d6e5a8f@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add bindings for touchscreen controllers attached using the Z2 protocol.
Those are present in most Apple devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-z2-v6-1-c2115d6e5a8f@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When testing perf trace on NixOS, I noticed significant startup delays:
- `ls`: ~2ms
- `strace ls`: ~10ms
- `perf trace ls`: ~550ms
Profiling showed that 51% of the time is spent reading files,
26% in loading BPF programs, and 11% in `newfstatat`.
This patch optimizes module path exploration by avoiding `stat()` calls
unless necessary. For filesystems that do not implement `d_type`
(DT_UNKNOWN), it falls back to the old behavior.
See `readdir(3)` for details.
This reduces `perf trace ls` time to ~500ms.
A more thorough startup optimization based on command parameters would
be ideal, but that is a larger effort.
Signed-off-by: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Acked-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250206113314.335376-2-krzysztof.m.lopatowski@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If the TLS handshake attempt returns -ETIMEDOUT, we currently translate
that error into -EACCES. This becomes problematic for cases where the RPC
layer is attempting to re-connect in paths that don't resonably handle
-EACCES, for example: writeback. The RPC layer can handle -ETIMEDOUT quite
well, however - so if the handshake returns this error let's just pass it
along.
Fixes: 75eb6af7ac ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
If the file is sillyrenamed, and slated for delete on close, it is
possible for a server reboot to triggeer an open reclaim, with can again
race with the application call to close(). When that happens, the call
to put_nfs_open_context() can trigger a synchronous delegreturn call
which deadlocks because it is not marked as privileged.
Instead, ensure that the call to nfs4_inode_return_delegation_on_close()
catches the delegreturn, and schedules it asynchronously.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: adb4b42d19 ("Return the delegation when deleting sillyrenamed files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f9 ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Adjust the timestamps if O_DIRECT is being combined with attribute
delegations.
Fixes: e12912d941 ("NFSv4: Add support for delegated atime and mtime attributes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
While it is uncommon for delegations to be held while O_DIRECT writes
are in progress, it is possible. The xfstests generic/647 and
generic/729 both end up triggering that state, and end up failing due to
the fact that the file size is not adjusted.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219738
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Added a check for "read-only" mode in the `jfs_truncate_nolock`
function to avoid errors related to writing to a read-only
filesystem.
Call stack:
block_write_begin() {
jfs_write_failed() {
jfs_truncate() {
jfs_truncate_nolock() {
txEnd() {
...
log = JFS_SBI(tblk->sb)->log;
// (log == NULL)
If the `isReadOnly(ip)` condition is triggered in
`jfs_truncate_nolock`, the function execution will stop, and no
further data modification will occur. Instead, the `xtTruncate`
function will be called with the "COMMIT_WMAP" flag, preventing
modifications in "read-only" mode.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+4e89b5368baba8324e07@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=4e89b5368baba8324e07
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Currently the code checks that there is no "ipc" in the sort order
and add an ipc string. This will always error out on the second pass
after input reload/switch, since the sort order already contains "ipc".
Do the ipc check/fixup only on the first pass.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20250108063628.215577-1-dvyukov@google.com
Fixes: ec6ae74fe8 ("perf report: Display average IPC and IPC coverage per symbol")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The symbol_conf.use_callchain should be reset when switching to new data
file, otherwise report__setup_sample_type() will show an error message
that it enabled callchains but no callchain data. The function also
will turn on the callchains if the data has PERF_SAMPLE_CALLCHAIN so I
think it's ok to reset symbol_conf.use_callchain here.
Link: https://lore.kernel.org/r/20250211060745.294289-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The 's' key is to switch to a new data file and load the data in the
same window. The switch_data_file() will show a popup menu to select
which data file user wants and update the 'input_name' global variable.
But in the cmd_report(), it didn't update the data.path using the new
'input_name' and keep usng the old file. This is fairly an old bug and
I assume people don't use this feature much. :)
Link: https://lore.kernel.org/r/20250211060745.294289-1-namhyung@kernel.org
Closes: https://lore.kernel.org/linux-perf-users/89e678bc-f0af-4929-a8a6-a2666f1294a4@linaro.org
Fixes: f5fc14124c ("perf tools: Add data object to handle perf data file")
Reported-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In sysfs, the perf events are all located in
/sys/bus/event_source/devices/ but some places ended up hard-coding the
location to be at the root of /sys/devices/ which could be very risky as
you do not exactly know what type of device you are accessing in sysfs
at that location.
So fix this all up by properly pointing everything at the bus device
list instead of the root of the sysfs devices/ tree.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/2025021955-implant-excavator-179d@gregkh
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When listing in verbose mode, the long description is used but the PMU
name isn't appended. There doesn't seem to be a reason to exclude it
when asking for more information, so use the same print block for both
long and short descriptions.
Before:
$ perf list -v
...
inst_retired
[Instruction architecturally executed]
After:
$ perf list -v
...
inst_retired
[Instruction architecturally executed. Unit: armv8_cortex_a57]
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250219151622.1097289-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If malloc returns NULL due to low memory, 'config' pointer can be NULL.
Add a check to prevent NULL dereference.
Link: https://lore.kernel.org/r/20250219122715.3892223-1-quic_zhonhan@quicinc.com
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We want to avoid checking ->ki_complete directly in the io_uring
completion path. Fortunately we have only two callback the selection
of which depend on the ring constant flags, i.e. IOPOLL, so use that
to infer the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4eb4bdab8cbcf5bc87083f7047edc81e920ab83c.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At the moment we can't sanely handle queuing an async request from a
multishot context, so disable them. It shouldn't matter as pollable
files / socekts don't normally do async.
Patching it in __io_read() is not the cleanest way, but it's simpler
than other options, so let's fix it there and clean up on top.
Cc: stable@vger.kernel.org
Reported-by: chase xd <sl1589472800@gmail.com>
Fixes: fc68fcda04 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7d51732c125159d17db4fe16f51ec41b936973f8.1739919038.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some applications don't want to wait for too long because the
time of retransmission increases exponentially and can reach more
than 10 seconds, for example. Eric implements the core logic
on supporting rto max feature in the stack previously. Based on that,
we can support it for BPF use.
This patch reuses the same logic of TCP_RTO_MAX_MS in do_tcp_setsockopt()
and do_tcp_getsockopt(). BPF program can call bpf_{set/get}sockopt()
to set/get the maximum value of RTO.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219081333.56378-2-kerneljasonxing@gmail.com
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of get_clockgating_state.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce the DCC and Tiling reset callback to all DCE versions that can
call it.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the kfd_process_device_init_vm function, a valid error code is now
returned when the associated Process Address Space ID (PASID) is not
present.
If the address space virtual memory (avm) does not have an associated
PASID, the function sets the ret variable to -EINVAL before proceeding
to the error handling section. This ensures that the calling function,
such as kfd_ioctl_acquire_vm, can appropriately handle the error,
thereby preventing any issues during virtual memory initialization.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:1694 kfd_process_device_init_vm()
warn: missing error code 'ret'
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c
1647 int kfd_process_device_init_vm(struct kfd_process_device *pdd,
1648 struct file *drm_file)
1649 {
...
1690
1691 if (unlikely(!avm->pasid)) {
1692 dev_warn(pdd->dev->adev->dev, "WARN: vm %p has no pasid associated",
1693 avm);
--> 1694 goto err_get_pasid;
ret = -EINVAL?
1695 }
Fixes: 8544374c0f ("drm/amdkfd: Have kfd driver use same PASID values from graphic driver")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Xiaogang Chen <xiaogang.chen@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need to check adev for sure.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move code about checking aca enabled to the cper init/fini function
to make code clean.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If firmware supported NPS modes are available through CAP register, use
those values for supported NPS modes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SMU v13.0.12, always query the firmware to get the current power
limit as it could be updated through other means also.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ring reset function callback for JPEG4_0_3 to
recover from job timeouts without a full gpu reset.
V2:
- sched->ready flag shouldn't be modified by HW backend (Christian)
V3:
- Dont modifying sched/job-submission state from HW backend (Christian)
- Implement per-core reset sequence
V4:
- Dont create reset_mask sysfs and return -EOPNOTSUPP on VFs (Lijo)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
