This initializes SDMA IP version 6.1.3.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This initializes GC IP version 11.5.3.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It uses the VGADCC bus. DC doesn't use this bus, so it
is safe to add it here.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change. Rework the code to allow for
adding some additional i2c buses in conjunction with DC
in the future.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was leftover from when amdgpu was forked from radeon.
The function is empty so drop it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the value pulled from the vbios just like newer chips.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fields are marked as reserved in atom_firmware_info_v3_1,
but thet contain valid data in all of the vbios images I've
looked at so add parse these fields as per
atom_firmware_info_v3_2. The offsets are the same and the
reset of the structure is the same.
v2: squash in NULL checks
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose the OEM i2c bus on boards that support it.
This bus is used for OEM specific features like RGB, etc.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow the creation of an OEM i2c bus and use the proper
DC helpers for that case.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the i2c bus used by OEMs for board specific i2c features
like RGB.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC supports SW i2c as well. Drop the check.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_index can be fetched from the ddc_service; no need for a separate
parameter. res is not used.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
increase max rings to 132 to support all JPEG5_0_1 cores, else
ring_init fails due to ring count exceeding maximum limit.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SPC document states that "The COMMAND DATA LENGTH field indicates the
length in bytes of the command descriptor list".
The length should be subtracted by 4 to represent the length of the
description list, not 3.
Signed-off-by: Chaohai Chen <wdhh66@163.com>
Link: https://lore.kernel.org/r/20250115070739.216154-1-wdhh66@163.com
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
It is possible for some waves in a workgroup to finish their save
sequence before the group leader has had time to capture the workgroup
barrier state. When this happens, having those waves exit do impact the
barrier state. As a consequence, the state captured by the group leader
is invalid, and is eventually incorrectly restored.
This patch proposes to have all waves in a workgroup wait for each other
at the end of their save sequence (just before calling s_endpgm_saved).
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
In function psp_init_cap_microcode(), it should bail out when failed to
load firmware, otherwise it may cause invalid memory access.
Fixes: 07dbfc6b10 ("drm/amd: Use `amdgpu_ucode_*` helpers for PSP")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Fixes: fb91065851 ("drm/amdkfd: Refactor queue wptr_bo GART mapping")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bump the driver version for RV/PCO compute stability fix
so mesa can use this check to enable compute queues on
RV/PCO.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
When mesa started using compute queues more often
we started seeing additional hangs with compute queues.
Disabling gfxoff seems to mitigate that. Manually
control gfxoff and gfx pg with command submissions to avoid
any issues related to gfxoff. KFD already does the same
thing for these chips.
v2: limit to compute
v3: limit to APUs
v4: limit to Raven/PCO
v5: only update the compute ring_funcs
v6: Disable GFX PG
v7: adjust order
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Błażej Szczygieł <mumei6102@gmail.com>
Suggested-by: Sergey Kovalenko <seryoga.engineering@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3861
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-January/119116.html
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
Jakub Kicinski says:
====================
eth: fbnic: report software queue stats
Fill in typical software queue stats.
# ./pyynl/cli.py --spec netlink/specs/netdev.yaml --dump qstats-get
[{'ifindex': 2,
'rx-alloc-fail': 0,
'rx-bytes': 398064076,
'rx-csum-complete': 271,
'rx-csum-none': 0,
'rx-packets': 276044,
'tx-bytes': 7223770,
'tx-needs-csum': 28148,
'tx-packets': 28449,
'tx-stop': 0,
'tx-wake': 0}]
Note that we don't collect csum-unnecessary, just the uncommon
cases (and unnecessary is all the rest of the packets). There
is no programatic use for these stats AFAIK, just manual debug.
====================
Link: https://patch.msgid.link/20250211181356.580800-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like recent commit broke the sort order, fix it.
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The queue stats struct is used for Rx and Tx queues. Wrap
the Tx stats in a struct and a union, so that we can reuse
the same space for Rx stats on Rx queues.
This also makes it easy to add an assert to the stat handling
code to catch new stats not being aggregated on shutdown.
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 13c7c941e7 ("netdev: add qstat for csum complete") reserved
the entry for csum complete in the qstats uAPI. Start reporting this
value now that we have a driver which needs it.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
_orig_restart_count is unused now, according to the logic, trans_was_restarted
should be using _orig_restart_count.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Incorrectly handled transaction restarts can be a source of heisenbugs;
add a mode where we randomly inject them to shake them out.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
UVD and VCN were split into separate dpm helpers in commit
ff69bba05f ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
as such, there is no need to include UVD in the is_vcn variable since
UVD and VCN are handled by separate dpm helpers now. Fix the check.
Fixes: ff69bba05f ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3959
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-February/119827.html
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Boyuan Zhang <boyuan.zhang@amd.com>
The way to assign NPE (network processing engines) shifted
during device tree design and an erroneous entry was left
behind in a disabled node. Fix it up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250210-ixp4xx-dts-v1-1-6b752d745e04@linaro.org
This is the idiomatic way that opcodes should setup their async data,
so that it's always valid inside ->issue() without issue needing to
do that.
Fixes: f31ecf671d ("io_uring: add IORING_OP_WAITID support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since this is deep in the architecture, and the code is
called nested into other deep management code, this really
needs to be a raw spinlock. Convert it.
Link: https://patch.msgid.link/20250110125550.32479-8-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This is needed because at least in time-travel the code
can be called directly from the deep architecture and
IRQ handling code.
Link: https://patch.msgid.link/20250110125550.32479-7-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This code can be called deep in the IRQ handling, for
example, and then cannot normally use kmalloc(). Have
its own pre-allocated memory and use from there instead
so this doesn't occur. Only in the (very rare) case of
memcpy_toio() we'd still need to allocate memory.
Link: https://patch.msgid.link/20250110125550.32479-6-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The stub execution uses the somewhat new close_range and execveat
syscalls. Of these two, the execveat call is essential, but the
close_range call is more about stub process hygiene rather than safety
(and its result is ignored).
Replace both calls with a raw syscall as older machines might not have a
recent enough kernel for close_range (with CLOSE_RANGE_CLOEXEC) or a
libc that does not yet expose both of the syscalls.
Fixes: 32e8eaf263 ("um: use execveat to create userspace MMs")
Reported-by: Glenn Washburn <development@efficientek.com>
Closes: https://lore.kernel.org/20250108022404.05e0de1e@crass-HP-ZBook-15-G2
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250113094107.674738-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The stack needs to be properly aligned so 16 byte memory accesses on the
stack are correct. This was broken when introducing the dynamic math
register sizing as the rounding was not moved appropriately.
Fixes: 3f17fed214 ("um: switch to regset API and depend on XSTATE")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250107133509.265576-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The init_task instance of struct task_struct is statically allocated and
does not contain the dynamic area for the userspace FP registers. As
such, limit the copy to the valid area of init_task and fill the rest
with zero.
Note that the FP state is only needed for userspace, and as such it is
entirely reasonable for init_task to not contain it.
Reported-by: Brian Norris <briannorris@chromium.org>
Closes: https://lore.kernel.org/Z1ySXmjZm-xOqk90@google.com
Fixes: 3f17fed214 ("um: switch to regset API and depend on XSTATE")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241217202745.1402932-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It was reported that qemu may not enable the XSTATE CPU extension, which
is a requirement after commit 3f17fed214 ("um: switch to regset API
and depend on XSTATE"). Add a fallback to use FXSAVE (FP registers on
x86_64 and XFP on i386) which is just a shorter version of the same
data. The only difference is that the XSTATE magic should not be set in
the signal frame.
Note that this still drops support for the older i386 FP register layout
as supporting this would require more backward compatibility to build a
correct signal frame.
Fixes: 3f17fed214 ("um: switch to regset API and depend on XSTATE")
Reported-by: SeongJae Park <sj@kernel.org>
Closes: https://lore.kernel.org/r/20241203070218.240797-1-sj@kernel.org
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241204074827.1582917-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Any uring_cmd always has async data allocated now, there's no reason to
check and clear a cached copy of the SQE.
Fixes: d10f19dff5 ("io_uring/uring_cmd: switch to always allocating async data")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Starting with Rust 1.86.0 (to be released 2025-04-03), Clippy will have
a new lint, `doc_overindented_list_items` [1], which catches cases of
overindented list items.
The lint has been added by Yutaro Ohno, based on feedback from the kernel
[2] on a patch that fixed a similar case -- commit 0c5928dead ("rust:
block: fix formatting in GenDisk doc").
Clippy reports a few cases in the kernel, apart from the one already
fixed in the commit above. One is this one:
error: doc list item overindented
--> rust/kernel/rbtree.rs:1152:5
|
1152 | /// null, it is a pointer to the root of the [`RBTree`].
| ^^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
= note: `-D clippy::doc-overindented-list-items` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::doc_overindented_list_items)]`
Thus clean it up.
Cc: Yutaro Ohno <yutaro.ono.418@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: a335e95914 ("rust: rbtree: add `RBTree::entry`")
Link: https://github.com/rust-lang/rust-clippy/pull/13711 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/13601 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Link: https://lore.kernel.org/r/20250206232022.599998-1-ojeda@kernel.org
[ There are a few other cases, so updated message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Starting with Rust 1.85.0 (currently in beta, to be released 2025-02-20),
under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`,
one may trigger a new `objtool` warning:
rust/kernel.o: warning: objtool: _R...securityNtB2_11SecurityCtx8as_bytes()
falls through to next function _R...core3ops4drop4Drop4drop()
due to a call to the `noreturn` symbol:
core::panicking::assert_failed::<usize, usize>
Thus add it to the list so that `objtool` knows it is actually `noreturn`.
Do so matching with `strstr` since it is a generic.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250112143951.751139-1-ojeda@kernel.org
[ Updated Cc: stable@ to include 6.13.y. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
TDA998x is the HDMI bridge driver, incorporating drm_connector and
optional drm_encoder (created via the component bind API by the TICLDC
and HDLCD drivers). Thus it should be residing together with the other
DRM bridge drivers under drivers/gpu/drm/bridge/.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-3-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move the driver for NXP TDA9950 / CEC part of TDA998x together to
drivers/media/i2c, close to other CEC drivers. Specify 'default
DRM_I2C_NXP_TDA998X' in order to simplify migration from old config
files as the Kconfig name has been changed to follow media/cec style.
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-2-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
