The last use of iwl_ax204_name[], iwl_ax221_name[] and iwl_cfg_so_a0_ms_a0
was removed by
commit f473a7fd6d ("wifi: iwlwifi: remove devices that never came out")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-7-linux@treblig.org
iwl_bz_name[] has been unused since the resent
commit 6795a37161 ("wifi: iwlwifi: Print a specific device name.")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-6-linux@treblig.org
iwl_mvm_ftm_add_pasn_sta() was added in 2020 by
commit 0739a7d70e ("iwlwifi: mvm: initiator: add option for adding a
PASN responder")
but hasn't been used.
Remove it.
That was the only caller of iwl_mvm_ftm_remove_pasn_sta().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-5-linux@treblig.org
iwl_mvm_ftm_respoder_add_pasn_sta() and
iwl_mvm_ftm_resp_remove_pasn_sta() were added in 2020 by
commit be82ecd3a5 ("iwlwifi: mvm: add an option to add PASN station")
but have remained unused.
Remove them.
After that removal iwl_mvm_add_pasn_sta() is now unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-4-linux@treblig.org
iwl_mvm_rx_missed_vap_notif() was added in 2019 by
commit 449a29d0fe ("iwlwifi: mvm: add notification for missed VAP")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-3-linux@treblig.org
iwl_rx_ant_restriction() was added in 2009 by
commit 46f9381aa3 ("iwlwifi: Thermal Throttling Management - part 2")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241223013202.340180-2-linux@treblig.org
This change introduces a new selftest case to verify the functionality
of dumping IPv4 multicast addresses using the RTM_GETMULTICAST netlink
message. The test utilizes the ynl library to interact with the
netlink interface and validate that the kernel correctly reports the
joined IPv4 multicast addresses.
To run the test, execute the following command:
$ vng -v --user root --cpus 16 -- \
make -C tools/testing/selftests TARGETS=net \
TEST_PROGS=rtnetlink.py TEST_GEN_PROGS="" run_tests
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20250207110836.2407224-2-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extended RTM_GETMULTICAST to support dumping joined IPv4 multicast
addresses, in addition to the existing IPv6 functionality. This allows
userspace applications to retrieve both IPv4 and IPv6 multicast
addresses through similar netlink command and then monitor future
changes by registering to RTNLGRP_IPV4_MCADDR and RTNLGRP_IPV6_MCADDR.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20250207110836.2407224-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The core is reset both in `fec_restart()` (called on link-up) and
`fec_stop()` (going to sleep, driver remove etc.). These two functions
had their separate implementations, which was at first only a register
write and a `udelay()` (and the accompanying block comment). However,
since then we got soft-reset (MAC disable) and Wake-on-LAN support, which
meant that these implementations diverged, often causing bugs.
For instance, as of now, `fec_stop()` does not check for
`FEC_QUIRK_NO_HARD_RESET`, meaning the MII/RMII mode is cleared on eg.
a PM power-down event; and `fec_restart()` missed the refactor renaming
the "magic" constant `1` to `FEC_ECR_RESET`.
To harmonize current implementations, and eliminate this source of
potential future bugs, refactor implementation to a common function.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250207121255.161146-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Fix panic during interface removal in BATMAN V, by Andy Strohman
- Cleanup BATMAN V/ELP metric handling, by Sven Eckelmann (2 patches)
- Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1(),
by Remi Pommarel
-----BEGIN PGP SIGNATURE-----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=yESc
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20250207' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix panic during interface removal in BATMAN V, by Andy Strohman
- Cleanup BATMAN V/ELP metric handling, by Sven Eckelmann (2 patches)
- Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1(),
by Remi Pommarel
* tag 'batadv-net-pullrequest-20250207' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix incorrect offset in batadv_tt_tvlv_ogm_handler_v1()
batman-adv: Drop unmanaged ELP metric worker
batman-adv: Ignore neighbor throughput metrics in error case
batman-adv: fix panic during interface removal
====================
Link: https://patch.msgid.link/20250207095823.26043-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The top of stolen memory is WOPCM, which shouldn't be accessed. Remove
this portion from the stolen memory region for discrete platforms.
This was already done for integrated, but was missing for discrete
platforms.
This also moves get_wopcm_size() so detect_bar2_dgfx() and
detect_bar2_integrated can use the same function.
v2: Improve commit message and suitable stable version tag(Lucas)
Fixes: d8b52a02cb ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210143654.2076747-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Edgeble-6TOPS modules configure HDMI1 for HDMI Out from RK3588.
Enable it on Edgeble-6TOPS IO Board dtsi.
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20241227132936.168100-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
vmclock_probe() uses an "out:" label to return from the function on
error. This indicates that some cleanup operation is necessary.
However the label does not do anything as all resources are managed
through devres, making the code slightly harder to read.
Remove the label and just return directly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most resources owned by the vmclock device are managed through devres.
Only the miscdev and ptp clock are managed manually.
This makes the code slightly harder to understand than necessary.
Switch them over to devres and remove the now unnecessary drvdata.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vmclock_remove() tries to detect the successful registration of the misc
device based on the value of its minor value.
However that check is incorrect if the misc device registration was not
attempted in the first place.
Always initialize the minor number, so the check works properly.
Fixes: 2050327242 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If vmclock_ptp_register() fails during probing, vmclock_remove() is
called to clean up the ptp clock and misc device.
It uses dev_get_drvdata() to access the vmclock state.
However the driver data is not yet set at this point.
Assign the driver data earlier.
Fixes: 2050327242 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Without the .owner field, the module can be unloaded while /dev/vmclock0
is open, leading to an oops.
Fixes: 2050327242 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the necessary DT changes to enable the second HDMI output port on
Radxa ROCK 5B.
While at it, switch the position of &vop_mmu and @vop to maintain the
alphabetical order.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Alexandre ARNOUD <aarnoud@me.com>
Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-4-02cdca22ff68@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for the second HDMI TX port found on RK3588 SoC.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-6tops-modules
Tested-by: Alexandre ARNOUD <aarnoud@me.com>
Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-3-02cdca22ff68@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In preparation to enable the second HDMI output port found on RK3588
SoC, add the related PHY node. This requires a GRF, hence add the
dependent node as well.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-6tops-modules
Tested-by: Alexandre ARNOUD <aarnoud@me.com>
Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-2-02cdca22ff68@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
H96 Max V58 has its spdif_tx0 controller wired to a dedicated optical
Toslink SPDIF socket, enable it in the device tree
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250120-rk3588-spdif-v1-3-1415f5871dc7@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a missing newline to the format string of the "Couldn't get IRQ
for bank..." error message.
Fixes: 757651e3d6 ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-3-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The settings for all GPIOs are locked by default in bcm_kona_gpio_reset.
The settings for a GPIO are unlocked when requesting it as a GPIO, but
not when requesting it as an interrupt, causing the IRQ settings to not
get applied.
Fix this by making sure to unlock the right bits when an IRQ is requested.
To avoid a situation where an IRQ being released causes a lock despite
the same GPIO being used by a GPIO request or vice versa, add an unlock
counter and only lock if it reaches 0.
Fixes: 757651e3d6 ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-2-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The GPIO lock/unlock functions clear/write a bit to the relevant
register for each bank. However, due to an oversight the bit that
was being written was based on the total GPIO number, not the index
of the GPIO within the relevant bank, causing it to fail for any
GPIO above 32 (thus any GPIO for banks above bank 0).
Fix lock/unlock for these banks by using the correct bit.
Fixes: bdb93c03c5 ("gpio: bcm281xx: Centralize register locking")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-1-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The one of previous changes modified the library code to use
helpers from string_choices.h. Nevertheless it misses more
opportunities to convert the code. Here is the second part
of the conversion.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250205112936.575493-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a temporary variable to keep a pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250207151825.2122419-8-andriy.shevchenko@linux.intel.com
[Bartosz: finish the job by converting three more instances]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add the __counted_by() compiler attribute to the flexible array member
volumes to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Use struct_size() instead of manually calculating the number of bytes to
allocate the private structure with a buffer.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250207151825.2122419-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use macros defined in linux/cleanup.h to automate resource lifetime
control in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250207151825.2122419-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
