The cited comment removed the netdev notifier register call
from the driver. But, it did not remove the cleanup code from
the unload path. As a result, driver unload is not clean and
resulted in undesired behaviour.
Fixes: d3b15fcc42 ("RDMA/bnxt_re: Remove deliver net device event")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1738657285-23968-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is a possibility that ulp_irq_stop and ulp_irq_start
callbacks will be called when the device is in detached state.
This can cause a crash due to NULL pointer dereference as
the rdev is already freed.
Fixes: cc5b9b48d4 ("RDMA/bnxt_re: Recover the device when FW error is detected")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1738657285-23968-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the bnxt_re_async_notifier() callback, the way driver retrieves
rdev pointer is wrong. The rdev pointer should be parsed from
adev pointer as while registering with the L2 for ULP, driver uses
the aux device pointer for the handle.
Fixes: 7fea327840 ("RDMA/bnxt_re: Add Async event handling support")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1738657285-23968-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://patch.msgid.link/598031332ce738c82286a158cb66eb7e735b2e79.1738746904.git.namcao@linutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PTL-H uses the same configuration as PTL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-4-peter.ujfalusi@linux.intel.com
Use same recipes as PTL for PTL-H.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-3-peter.ujfalusi@linux.intel.com
This commit makes use of appletb_bl_brightness_map instead of using if
statements and magic numbers to set default brightness, and thus simplifies
the code.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit addresses the sparse warning flagged by the kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502091105.ZsLoBSIh-lkp@intel.com/
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Rewrite __real_pte() and __rpte_to_hidx() as static inline in order to
avoid following warnings/errors when building with 4k page size:
CC arch/powerpc/mm/book3s64/hash_tlb.o
arch/powerpc/mm/book3s64/hash_tlb.c: In function 'hpte_need_flush':
arch/powerpc/mm/book3s64/hash_tlb.c:49:16: error: variable 'offset' set but not used [-Werror=unused-but-set-variable]
49 | int i, offset;
| ^~~~~~
CC arch/powerpc/mm/book3s64/hash_native.o
arch/powerpc/mm/book3s64/hash_native.c: In function 'native_flush_hash_range':
arch/powerpc/mm/book3s64/hash_native.c:782:29: error: variable 'index' set but not used [-Werror=unused-but-set-variable]
782 | unsigned long hash, index, hidx, shift, slot;
| ^~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501081741.AYFwybsq-lkp@intel.com/
Fixes: ff31e10546 ("powerpc/mm/hash64: Store the slot information at the right offset for hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/e0d340a5b7bd478ecbf245d826e6ab2778b74e06.1736706263.git.christophe.leroy@csgroup.eu
Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13:
[ 12.028126] ==================================================================
[ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1
[ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3
[ 12.028408] Tainted: [T]=RANDSTRUCT
[ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
[ 12.028500] Call Trace:
[ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable)
[ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708
[ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300
[ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370
[ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40
[ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210
[ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590
[ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0
[ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0
[ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930
[ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280
[ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370
[ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00
[ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40
[ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610
[ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280
[ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8
[ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000
[ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty)
[ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000
[ 12.029855] IRQMASK: 0
GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005
GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000
GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90
GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80
GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8
GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580
[ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030405] --- interrupt: 3000
[ 12.030444] ==================================================================
Commit c28c15b6d2 ("powerpc/code-patching: Use temporary mm for
Radix MMU") is inspired from x86 but unlike x86 is doesn't disable
KASAN reports during patching. This wasn't a problem at the begining
because __patch_mem() is not instrumented.
Commit 465cabc97b ("powerpc/code-patching: introduce
patch_instructions()") use copy_to_kernel_nofault() to copy several
instructions at once. But when using temporary mm the destination is
not regular kernel memory but a kind of kernel-like memory located
in user address space. Because it is not in kernel address space it is
not covered by KASAN shadow memory. Since commit e4137f0881 ("mm,
kasan, kmsan: instrument copy_from/to_kernel_nofault") KASAN reports
bad accesses from copy_to_kernel_nofault(). Here a bad access to user
memory is reported because KASAN detects the lack of shadow memory and
the address is below TASK_SIZE.
Do like x86 in commit b3fd8e83ad ("x86/alternatives: Use temporary
mm for text poking") and disable KASAN reports during patching when
using temporary mm.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Close: https://lore.kernel.org/all/20250201151435.48400261@yea/
Fixes: 465cabc97b ("powerpc/code-patching: introduce patch_instructions()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1c05b2a1b02ad75b981cfc45927e0b4a90441046.1738577687.git.christophe.leroy@csgroup.eu
There are some typos in comments/messages:
- althougth -> although
- asume -> assume
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250206082457.9148-1-algonell@gmail.com
This function tells the firmware what rates it can use.
Put the 3SS and 4SS HT rates supported by the other station into the
rate mask.
Remove the 3SS and 4SS rates from the rate mask if the hardware only has
2 spatial streams.
And finally, select the right rate ID (a parameter for the firmware)
when the hardware has 3 spatial streams.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/48d1d90f-2aeb-4ec5-9a24-0980e10eae1e@gmail.com
Although the RTL8814AU only has 3 spatial streams, maybe some other chip
has 4.
Correct the TX power index and TX power limit calculations for 3SS and
4SS HT/VHT rates.
With this the RTL8814AU can set the TX power correctly.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/d0c0e126-0794-4c4e-9203-ea39a707b673@gmail.com
These structs and arrays are never modified, so make them const:
rtw_band_2ghz
rtw_band_5ghz
rtw_pci_tx_queue_idx_addr
rtw_pci_ops
rtw_cck_rates
rtw_ofdm_rates
rtw_ht_1s_rates
rtw_ht_2s_rates
rtw_vht_1s_rates
rtw_vht_2s_rates
rtw_rate_section
rtw_rate_size
rtw_sdio_ops
rtw_usb_ops
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/502f124e-ccf3-4c09-80a4-1e5c5304822b@gmail.com
The existing code is suitable for chips with up to 2 spatial streams.
Inform the firmware about the rates it's allowed to use when
transmitting 3 spatial streams.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/08e2f328-1aab-4e50-93ac-c1e5dd9541ac@gmail.com
These members of struct rtw_chip_info each have a size of 2. Increase
their size to 4, which is the number of RF paths the RTL8814AU has.
This is required to read and write the RF registers of the RTL8814AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/7a4d8209-b8af-4943-b5de-f53d6edf591a@gmail.com
Currently this struct has the members required for chips with 2 RF
paths. Add more members to support chips with 4 RF paths, like the
RTL8814AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/be5a73f4-a0fe-43d6-9457-930cde199284@gmail.com
After the firmware is uploaded, download_firmware_validate() checks some
bits in REG_MCUFW_CTRL to see if everything went okay. The
RTL8814AU power on sequence sets bits 13 and 12 to 2, which this
function does not expect, so it thinks the firmware upload failed.
Make download_firmware_validate() ignore bits 13 and 12.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/049d2887-22fc-47b7-9e59-62627cb525f8@gmail.com
Don't call ltecoex_read_reg() and ltecoex_reg_write() when the
ltecoex_addr member of struct rtw_chip_info is NULL. The RTL8814AU
doesn't have this feature.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/55b5641f-094e-4f94-9f79-ac053733f2cf@gmail.com
There is a typo in debug messages:
- afer -> after
Fix it via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203180913.5435-1-algonell@gmail.com
Since there are two function features for now, func_bitmap[] has single
one element, which BITMAP_FROM_U64() generating two elements is exceeded.
Change to assign function bitmap barely.
With i386-allmodconfig (a 32 bit system), it throws
>> include/linux/bitmap.h:736:33: warning: excess elements in array initializer
736 | ((unsigned long) ((u64)(n) >> 32))
| ^
drivers/net/wireless/realtek/rtw89/regd.c:16:34: note: in expansion of macro 'BITMAP_FROM_U64'
16 | .func_bitmap = { BITMAP_FROM_U64(_fmap), }, \
| ^~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw89/regd.c:20:9: note: in expansion of macro 'COUNTRY_REGD'
20 | COUNTRY_REGD("00", RTW89_WW, RTW89_WW, RTW89_WW, 0x0);
| ^~~~~~~~~~~~
Fixes: 79a36fc56b ("wifi: rtw89: regd: handle supported regulatory functions by country")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502031932.BMQ4lhJT-lkp@intel.com/
Cc: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250205014051.13765-1-pkshih@realtek.com
The TWS(True wireless stereo) serials Bluetooth audio device need to keep
packet traffic not only with DUT, it also need to synchronize packet with
its assistant earbud. And all the BR/EDR Bluetooth device need to do page
scan to keep re-connect event sensitively between different DUT.
These behavior will make TWS Bluetooth device cost more time slot to keep
the good audio performance. This patch decrease half of Wi-Fi slot(from
40ms to 20ms) in a single cycle. Make the slot more flexible to prevent
audio lag. The single cycle will be shorter, then it will bring some slot
protection cost make Wi-Fi throughput decrease about 5%.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250205013233.10945-3-pkshih@realtek.com
If the slot duration is 0, the firmware timer will trigger timer hang at
the timer initializing state in a low rate due to hardware algorithm.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250205013233.10945-2-pkshih@realtek.com
A firmeware file contains multi-firmware with a header to represent
contents. The mfw_hdr->fw_nr is to define number of firmware in file.
+-----+-------+------+---------+--------------+
| sig | fw_nr | rsvd | version | reserved |
+---------------------------------------------+ --
fw 0 | cv | type | mp | rsvd | shift | size | rsvd | \
+---------------------------------------------+ |
fw 1 | cv | type | mp | rsvd | shift | size | rsvd | | mfw_hdr->fw_nr
+---------------------------------------------+ |
fw N-1 | ... | /
+=============================================+ --
| fw 0 content |
| (pointed by fw0 shift/size) |
+=============================================+
To avoid Coverity warning, validate header is in range of firmware size,
and also validate the range of actual firmware content is in range.
Addresses-Coverity-ID: 1494046 ("Untrusted loop bound")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203072911.47313-4-pkshih@realtek.com
Adding beacon BW offset, OP1dB table and rfe_type to lps_ml_cmn_info.
These information will help FW to configure RX more accurately.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203072911.47313-3-pkshih@realtek.com
Driver selects firmware by hardware version, which normally can be read
from registers before selecting firmware. However, certain chips such as
RTL8851B, it needs to read hardware version from efuse while doing
power_on, but do power_on after selecting firmware in current flow.
To resolve this flow problem, move power_on out from
rtw89_mac_partial_init(), and call rtw89_mac_pwr_on() separately at
proper places to have expected flow.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203072911.47313-2-pkshih@realtek.com
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
-----BEGIN PGP SIGNATURE-----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=uAVD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=32hC
-----END PGP SIGNATURE-----
Merge tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki)"
* tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Restrict power.set_active propagation
* Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
* Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
* Stop pretending that we can run the protected mode without a GICv3
being present on the host
* Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
* Always evaluate the need to arm a background timer for fully emulated
guest timers
* Fix the emulation of EL1 timers in the absence of FEAT_ECV
* Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
* move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code. As an initial set of cleanups, move
some code from mm/gmap into kvm and start using __kvm_faultin_pfn()
to fault-in pages as needed; but especially stop abusing page->index
and page->lru to aid in the pgdesc conversion.
x86:
* Add missing check in the fix to defer starting the huge page recovery
vhost_task
* SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmemTnEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP97gf/Rew+yEsRrHVk/j0R2XwFx51raYZy
eaicv07jYmwsnaALq6BEj4xxDW8dJEJgj05Czm1o9+9x8nvY2+UjT2q4J8fY9xdD
Yr+5GvEEz4x2GNL3ZYE3iHTNFQckNxOgMilLW3br1E+wjusShKmgGxPYTRyClQ34
gDBZQWzOG22UNC6PbW9dgTK54b57+NJdIZYuHz4LkMsTvzf6jXo5VumsgbbZqC4e
VGh5EUEPL7+cNzGY/+WURXI6OojdPzbneH1NP82uT3lo2WaHK9+B3N6H+W71N/T4
u1P7+g0WmdNj3FITvDpTJ7jNhke2atEjI9rvtHz6gwtf9SIujyuNl55uRA==
=r0h9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
Virtio gpu supports the drm_panic module, which displays a message to
the screen when a kernel panic occurs. It is supported where it has
vmapped shmem BO.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206104300.416014-1-ryasuoka@redhat.com
Fix the 'find_msrp_by_name()' function which returns incorrect matches for
cases like this:
s1 = "C1-";
find_msrp_by_name(head, s1);
Inside 'find_msrp_by_name()':
...
s2 = "C1"
if !(strcnmp(s1, s2, len(s2)))
// Incorrect match!
return mp;
Full strings should be match istead. Switch to 'strcmp()' to fix the problem.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
With the "crct10dif" algorithm having been removed from the crypto API,
crc_t10dif_is_optimized() is no longer used.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208175647.12333-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add an implementation for directory access operations.
To keep nolibc itself allocation-free, a "DIR *" does not point to any
data, but directly encodes a filedescriptor number, equivalent to "FILE *".
Without any per-directory storage it is not possible to implement
readdir() POSIX confirming. Instead only readdir_r() is provided.
While readdir_r() is deprecated in glibc, the reasons for that are
not applicable to nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250209-nolibc-dir-v2-2-57cc1da8558b@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Not all architectures have the old sys_lseek(), notably riscv32.
Implement lseek() in terms of sys_llseek() in that case.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250209-nolibc-dir-v2-1-57cc1da8558b@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Commit 3775fc538f ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f ("PM: sleep: core: Synchronize runtime PM status of parents and children")
Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
Add cpufreq nodes for Apple A11 SoC.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add cpufreq nodes for Apple A10 SoC. There is a transparent hardware
big.LITTLE switcher in this SoC. Spoof E-core p-state frequencies such
that CPU capacity does not appear to change when switching between core
types.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add cpufreq nodes for Apple A10 SoC. There is a transparent hardware
big.LITTLE switcher in this SoC. Spoof E-core p-state frequencies such
that CPU capacity does not appear to change when switching between core
types.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add cpufreq nodes for Apple A10 SoC. There is a transparent hardware
big.LITTLE switcher in this SoC. Spoof E-core p-state frequencies such
that CPU capacity does not appear to change when switching between core
types.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add cpufreq nodes for Apple A9X SoC.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add cpufreq nodes for the two variants of Apple A9 SoC. The difference is
that S8000 is slower than S8003 in state transitions.
Change the copyright information in s8000.dtsi and s8003.dtsi as well
since these are now essentially new files with the original content now
being in s800-0-3.dtsi.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add the cpufreq nodes for Apple A8X SoC.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add cpufreq nodes for Apple A8 SoC.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Add cpufreq nodes for Apple A7 SoC.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
