-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unused flexible-array member `buf` and, with this, fix the following
warnings:
drivers/net/ethernet/aquantia/atlantic/aq_hw.h:197:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/ethernet/aquantia/atlantic/hw_atl/../aq_hw.h:197:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Suggested-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://patch.msgid.link/Z6F3KZVfnAZ2FoJm@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers should always disable a NAPI instance before removing it.
If they don't the instance may be queued for polling.
Since commit 86e25f40aa ("net: napi: Add napi_config")
we also remove the NAPI from the busy polling hash table
in napi_disable(), so not disabling would leave a stale
entry there.
Use of busy polling is relatively uncommon so bugs may be lurking
in the drivers. Add an explicit warning.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250203215816.1294081-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
perf test 11 hwmon fails on s390 with this error
# ./perf test -Fv 11
--- start ---
---- end ----
11.1: Basic parsing test : Ok
--- start ---
Testing 'temp_test_hwmon_event1'
Using CPUID IBM,3931,704,A01,3.7,002f
temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/
FAILED tests/hwmon_pmu.c:189 Unexpected config for
'temp_test_hwmon_event1', 292470092988416 != 655361
---- end ----
11.2: Parsing without PMU name : FAILED!
--- start ---
Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/'
FAILED tests/hwmon_pmu.c:189 Unexpected config for
'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/',
292470092988416 != 655361
---- end ----
11.3: Parsing with PMU name : FAILED!
#
The root cause is in member test_event::config which is initialized
to 0xA0001 or 655361. During event parsing a long list event parsing
functions are called and end up with this gdb call stack:
#0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8,
term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623
#1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8,
terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662
#2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0,
attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false,
apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519
#3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8,
head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8)
at util/pmu.c:1545
#4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8,
list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090,
auto_merge_stats=true, alternate_hw_config=10)
at util/parse-events.c:1508
#5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8,
event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10,
const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0)
at util/parse-events.c:1592
#6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8,
scanner=0x16878c0) at util/parse-events.y:293
#7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8
"temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8)
at util/parse-events.c:1867
#8 0x000000000126a1e8 in __parse_events (evlist=0x168b580,
str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0,
err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true,
fake_tp=false) at util/parse-events.c:2136
#9 0x00000000011e36aa in parse_events (evlist=0x168b580,
str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8)
at /root/linux/tools/perf/util/parse-events.h:41
#10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false)
at tests/hwmon_pmu.c:164
#11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false)
at tests/hwmon_pmu.c:219
#12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368
<suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23
where the attr::config is set to value 292470092988416 or 0x10a0000000000
in line 625 of file ./util/hwmon_pmu.c:
attr->config = key.type_and_num;
However member key::type_and_num is defined as union and bit field:
union hwmon_pmu_event_key {
long type_and_num;
struct {
int num :16;
enum hwmon_type type :8;
};
};
s390 is big endian and Intel is little endian architecture.
The events for the hwmon dummy pmu have num = 1 or num = 2 and
type is set to HWMON_TYPE_TEMP (which is 10).
On s390 this assignes member key::type_and_num the value of
0x10a0000000000 (which is 292470092988416) as shown in above
trace output.
Fix this and export the structure/union hwmon_pmu_event_key
so the test shares the same implementation as the event parsing
functions for union and bit fields. This should avoid
endianess issues on all platforms.
Output after:
# ./perf test -F 11
11.1: Basic parsing test : Ok
11.2: Parsing without PMU name : Ok
11.3: Parsing with PMU name : Ok
#
Fixes: 531ee0fd48 ("perf test: Add hwmon "PMU" test")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Default SLPC power profile is Base(0). Power Saving mode(1)
has conservative up/down thresholds and is suitable for use with
apps that typically need to be power efficient.
Selected power profile will be displayed in this format-
$ cat slpc_power_profile
[base] power_saving
$ echo power_saving > slpc_power_profile
$ cat slpc_power_profile
base [power_saving]
v2: Disable waitboost in power saving profile, update sysfs
format and add some kernel doc for SLPC (Rodrigo)
v3: Update doc with info about power profiles (Rodrigo)
v4: Checkpatch warning and remove extra line (Rodrigo)
Cc: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117215753.749906-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Previous implementation assumes that there is 1:1 matching between
vectors and queues. It isn't always true.
Get minimum value from Rx/Tx queues to determine combined queues number.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The PXP implementation mimics the i915 approach of allowing the load
to continue even if PXP init has failed. On Xe however we're taking an
harder stance on boot error and only allowing the load to complete if
everything is working, so update the code to fail if anything goes wrong
during PXP init.
While at it, update the return code in case of PXP not supported to be 0
instead of EOPNOTSUPP, to follow the standard of functions called by
xe_device_probe where every non-zero value means failure.
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203234857.1419637-1-daniele.ceraolospurio@intel.com
This reverts commit
a2b5a99562 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, there are several files in drm/amd/display that aim to have a
higher -Wframe-larger-than value to avoid instances of that warning with
a lower value from the user's configuration. However, with the way that
it is currently implemented, it does not respect the user's request via
CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain
when new instances of the warning appear and break the build due to
CONFIG_WERROR.
Adjust the logic to switch from a hard coded -Wframe-larger-than value
to only using the value as a minimum clamp and deferring to the
requested value from CONFIG_FRAME_WARN if it is higher.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
lio_get_device_id() has been unused since 2018's
commit 64fecd3ec5 ("liquidio: remove obsolete functions and data
structures")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203183343.193691-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw_sp_ipip_lb_ul_vr_id() has been unused since 2020's
commit acde33bf73 ("mlxsw: spectrum_router: Reduce
mlxsw_sp_ipip_fib_entry_op_gre4()")
mlxsw_sp_rif_exists() has been unused since 2023's
commit 49c3a615d3 ("mlxsw: spectrum_router: Replay MACVLANs when RIF is
made")
mlxsw_sp_rif_vid() has been unused since 2023's
commit a5b52692e6 ("mlxsw: spectrum_switchdev: Manage RIFs on PVID
change")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250203190141.204951-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5dr_domain_sync() was added in 2019 by
commit 70605ea545 ("net/mlx5: DR, Expose APIs for direct rule managing")
but hasn't been used.
Remove it.
mlx5dr_domain_sync() was the only user of
mlx5dr_send_ring_force_drain().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250203185958.204794-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last use of mlx4_find_cached_mac() was removed in 2014 by
commit 2f5bb47368 ("mlx4: Add ref counting to port MAC table for RoCE")
mlx4_zone_free_entries() was added in 2014 by
commit 7a89399ffa ("net/mlx4: Add mlx4_bitmap zone allocator")
but hasn't been used. (The _unique version is used)
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250203185229.204279-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are some typos in comments/messages:
- Valiate -> Validate
- acceptible -> acceptable
- acces -> access
- relased -> released
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203175419.4146-1-algonell@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neigh_parms_destroy() is a simple kfree(), no need for
a forward declaration.
neigh_parms_put() can instead call kfree() directly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203151152.3163876-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XFRM API makes sure that xs->xso.dev is valid in all XFRM offload
callbacks. There is no need to check it again.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/0b2f8f5f09701bb43bbd83b94bfe5cb506b57adc.1738587150.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the 'struct cxl_dpa_partition' array contains both size and
performance information, all paths that iterate over that information
can use a loop rather than hard-code 'ram' and 'pmem' lookups.
Remove, or reduce the scope of the temporary helpers that bridged the
pre-'struct cxl_dpa_partition' state of the code to the post-'struct
cxl_dpa_partition' state.
- to_{ram,pmem}_perf(): scope reduced to just sysfs_emit + is_visible()
helpers
- to_{ram,pmem}_res(): fold into their only users cxl_{ram,pmem}_size()
- cxl_ram_size(): scope reduced to ram_size_show() (Note,
cxl_pmem_size() also used to gate nvdimm registration)
In short, memdev sysfs ABI already made the promise that 0-sized
partitions will show for memdevs, but that can be avoided for future
partitions by using dynamic sysfs group visibility (new relative to when
the partition ABI first shipped upstream).
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alejandro Lucero <alucerop@amd.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864307519.668823.10800104022426067621.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Now that the operational mode of DPA capacity (ram vs pmem... etc) is
tracked in the partition, and no code paths have dependencies on the
mode implying the partition index, the ambiguous 'enum cxl_decoder_mode'
can be cleaned up, specifically this ambiguity on whether the operation
mode implied anything about the partition order.
Endpoint decoders simply reference their assigned partition where the
operational mode can be retrieved as partition mode.
With this in place PMEM can now be partition0 which happens today when
the RAM capacity size is zero. Dynamic RAM can appear above PMEM when
DCD arrives, etc. Code sequences that hard coded the "PMEM after RAM"
assumption can now just iterate partitions and consult the partition
mode after the fact.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864306972.668823.3327008645125276726.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
cxl_dpa_alloc() is a hard coded nest of assumptions around PMEM
allocations being distinct from RAM allocations in specific ways when in
practice the allocation rules are only relative to DPA partition index.
The rules for cxl_dpa_alloc() are:
- allocations can only come from 1 partition
- if allocating at partition-index-N, all free space in partitions less
than partition-index-N must be skipped over
Use the new 'struct cxl_dpa_partition' array to support allocation with
an arbitrary number of DPA partitions on the device.
A follow-on patch can go further to cleanup 'enum cxl_decoder_mode'
concept and supersede it with looking up the memory properties from
partition metadata. Until then cxl_part_mode() temporarily bridges code
that looks up partitions by @cxled->mode.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864306400.668823.12143134425285426523.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The pending efforts to add CXL Accelerator (type-2) device [1], and
Dynamic Capacity (DCD) support [2], tripped on the
no-longer-fit-for-purpose design in the CXL subsystem for tracking
device-physical-address (DPA) metadata. Trip hazards include:
- CXL Memory Devices need to consider a PMEM partition, but Accelerator
devices with CXL.mem likely do not in the common case.
- CXL Memory Devices enumerate DPA through Memory Device mailbox
commands like Partition Info, Accelerators devices do not.
- CXL Memory Devices that support DCD support more than 2 partitions.
Some of the driver algorithms are awkward to expand to > 2 partition
cases.
- DPA performance data is a general capability that can be shared with
accelerators, so tracking it in 'struct cxl_memdev_state' is no longer
suitable.
- Hardcoded assumptions around the PMEM partition always being index-1
if RAM is zero-sized or PMEM is zero sized.
- 'enum cxl_decoder_mode' is sometimes a partition id and sometimes a
memory property, it should be phased in favor of a partition id and
the memory property comes from the partition info.
Towards cleaning up those issues and allowing a smoother landing for the
aforementioned pending efforts, introduce a 'struct cxl_dpa_partition'
array to 'struct cxl_dev_state', and 'struct cxl_range_info' as a shared
way for Memory Devices and Accelerators to initialize the DPA information
in 'struct cxl_dev_state'.
For now, split a new cxl_dpa_setup() from cxl_mem_create_range_info() to
get the new data structure initialized, and cleanup some qos_class init.
Follow on patches will go further to use the new data structure to
cleanup algorithms that are better suited to loop over all possible
partitions.
cxl_dpa_setup() follows the locking expectations of mutating the device
DPA map, and is suitable for Accelerator drivers to use. Accelerators
likely only have one hardcoded 'ram' partition to convey to the
cxl_core.
Link: http://lore.kernel.org/20241230214445.27602-1-alejandro.lucero-palau@amd.com [1]
Link: http://lore.kernel.org/20241210-dcd-type2-upstream-v8-0-812852504400@intel.com [2]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305827.668823.13978794102080021276.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In preparation for consolidating all DPA partition information into an
array of DPA metadata, introduce helpers that hide the layout of the
current data. I.e. make the eventual replacement of ->ram_res,
->pmem_res, ->ram_perf, and ->pmem_perf with a new DPA metadata array a
no-op for code paths that consume that information, and reduce the noise
of follow-on patches.
The end goal is to consolidate all DPA information in 'struct
cxl_dev_state', but for now the helpers just make it appear that all DPA
metadata is relative to @cxlds.
As the conversion to generic partition metadata walking is completed,
these helpers will naturally be eliminated, or reduced in scope.
Cc: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305238.668823.16553986866633608541.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CXL_DECODER_MIXED is a safety mechanism introduced for the case where
platform firmware has programmed an endpoint decoder that straddles a
DPA partition boundary. While the kernel is careful to only allocate DPA
capacity within a single partition there is no guarantee that platform
firmware, or anything that touched the device before the current kernel,
gets that right.
However, __cxl_dpa_reserve() will never get to the CXL_DECODER_MIXED
designation because of the way it tracks partition boundaries. A
request_resource() that spans ->ram_res and ->pmem_res fails with the
following signature:
__cxl_dpa_reserve: cxl_port endpoint15: decoder15.0: failed to reserve allocation
CXL_DECODER_MIXED is dead defensive programming after the driver has
already given up on the device. It has never offered any protection in
practice, just delete it.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864304660.668823.17000888505587850279.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Modify the scx_qmap scheduler to print the core event counter
every second.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Modify the scx_central scheduler to print the core event counter
every second.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_bpf_events() is added to the header files so the BPF scheduler
can use it. Also, scx_read_event() is added to read an event type in a
compatible way.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a core event, SCX_EV_BYPASS_DURATION, which represents the
total duration of bypass modes in nanoseconds.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a core event, SCX_EV_BYPASS_DISPATCH, which represents how many
tasks have been dispatched in the bypass mode.
__scx_add_event() is used since the caller holds an rq lock or
p->pi_lock, so the preemption has already been disabled.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a core event, SCX_EV_BYPASS_ACTIVATE, which represents how many
times the bypass mode has been triggered.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a core event, SCX_EV_ENQ_SKIP_EXITING, which represents how many
times a task is enqueued to a local DSQ when exiting if
SCX_OPS_ENQ_EXITING is not set.
__scx_add_event() is used since the caller holds an rq lock,
so the preemption has already been disabled.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The existing PolarFire SoC devicetrees all use root port instance 1,
update the reg properties in PCIe nodes to use the new format that
specifies the instance in use. Failing to do so would still work but
produces warnings:
mpfs-icicle-kit.dtb: pcie@3000000000: reg: [[48, 0, 0, 134217728], [0, 1124073472, 0, 65536]] is too short
mpfs-icicle-kit.dtb: pcie@3000000000: reg-names: ['cfg', 'apb'] is too short
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
CC: Conor Dooley <conor@kernel.org>
CC: Daire McNamara <daire.mcnamara@microchip.com>
CC: valentina.fernandezalanis@microchip.com
CC: Rob Herring <robh@kernel.org>
CC: Krzysztof Kozlowski <krzk+dt@kernel.org>
CC: linux-riscv@lists.infradead.org
CC: devicetree@vger.kernel.org
CC: linux-kernel@vger.kernel.org
The GPIO drivers with latch interrupt support (typically types starting
with PCAL) have interrupt status registers to determine which particular
inputs have caused an interrupt. Unfortunately there is no atomic
operation to read these registers and clear the interrupt. Clearing the
interrupt is done by reading the input registers.
The code was reading the interrupt status registers, and then reading
the input registers. If an input changed between these two events it was
lost.
The solution in this patch is to revert to the non-latch version of
code, i.e. remembering the previous input status, and looking for the
changes. This system results in no more I2C transfers, so is no slower.
The latch property of the device still means interrupts will still be
noticed if the input changes back to its initial state.
Fixes: 44896beae6 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606033102.2271916-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The script uses non-POSIX features like `[[` for conditionals and hence
does not work when run with a POSIX /bin/sh.
Change the shebang to /bin/bash instead, like the other tests in cgroup.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
On s390 the event instructions can not be used for recording.
This event is only supported by perf stat.
Change the event from instructions to cycles in subtest
test_leader_sampling.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: James Clark <james.clark@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250131102756.4185235-3-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On s390 the event instructions can not be used for recording.
This event is only supported by perf stat.
Test that each event cycles and instructions supports sampling.
If the event can not be sampled, skip it.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: James Clark <james.clark@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250131102756.4185235-2-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The commit 78b435c904 ("spi: pxa2xx: Introduce __lpss_ssp_update_priv()
helper") broke speaker output on my ASUS UX5304MA laptop. The problem is
in inverted value that got written in the private register.
Simple bug, simple fix.
Fixes: 78b435c904 ("spi: pxa2xx: Introduce __lpss_ssp_update_priv() helper")
Signed-off-by: Mark Lord <mlord@pobox.com>
Tested-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250204174506.149978-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181 ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
- Properly handle return value when allocation fails for the preferred
affinity.
-----BEGIN PGP SIGNATURE-----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=lIYQ
-----END PGP SIGNATURE-----
Merge tag 'kthreads-fixes-2025-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthreads fix from Frederic Weisbecker:
- Properly handle return value when allocation fails for the preferred
affinity
* tag 'kthreads-fixes-2025-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: Fix return value on kzalloc() failure in kthread_affine_preferred()
This CPU was mistakenly given the name INTEL_ATOM_AIRMONT_MID. But it
uses a Silvermont core, not Airmont.
Change #define name to INTEL_ATOM_SILVERMONT_MID2
Reported-by: Christian Ludloff <ludloff@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241007165701.19693-1-tony.luck%40intel.com
Fixes:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
The following is an automated shortlog grouped by driver:
ideapad-laptop:
- pass a correct pointer to the driver data
intel/ifs:
- Update documentation with image download path
intel: pmc:
- fix ltr decode in pmc_core_ltr_show()
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ6HR1QAKCRBZrE9hU+XO
MZ66AP9MoxGhJJgR9A9+Rr+zwRLsbudl4XGJqGcDGFR4HeeVTwD3Q0mSBHvNW+XQ
yzwkyP+sySzQvoNu62n3GTsOnv75CA==
=b/yB
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
* tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Update documentation with image download path
platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()
platform/x86: ideapad-laptop: pass a correct pointer to the driver data
Add bindings for the DAIs available in WCD934x to avoid
having to use unclear number indices in device trees.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241209-starqltechn_integration_upstream-v8-1-ec604481d691@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 7caa976546 ("ftrace: riscv: move from REGS to ARGS"),
kprobe on ftrace is not supported by riscv.
And commit 3308172276 ("trace: riscv: Remove deprecated kprobe on
ftrace support") removed the relevant code, but left out the
documentation, so fix that.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250108020342.4172-1-cp0613@linux.alibaba.com
Commit 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
(cherry picked from commit 56b0337d42)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
