nilfs_lookup_dirty_data_buffers(), which iterates through the buffers
attached to dirty data folios/pages, accesses the attached buffers without
locking the folios/pages.
For data cache, nilfs_clear_folio_dirty() may be called asynchronously
when the file system degenerates to read only, so
nilfs_lookup_dirty_data_buffers() still has the potential to cause use
after free issues when buffers lose the protection of their dirty state
midway due to this asynchronous clearing and are unintentionally freed by
try_to_free_buffers().
Eliminate this race issue by adjusting the lock section in this function.
Link: https://lkml.kernel.org/r/20250107200202.6432-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is.
Link: https://lkml.kernel.org/r/20250107200202.6432-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250107200202.6432-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b2b14916b77acf8626d7
Reported-by: syzbot+d98fd19acd08b36ff422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d98fd19acd08b36ff422
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Tested-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The parameter is not used in __ocfs2_mknod_locked(). So remove it.
No functional change.
Link: https://lkml.kernel.org/r/20250106140634.92241-1-glass.su@suse.com
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While running fstests generic/329, the kernel workqueue
quota_release_workfn is dead looping in calling ocfs2_release_dquot().
The ocfs2 state is already readonly but ocfs2_release_dquot wants to
start a transaction but fails and returns.
=====================================================================
[ 2918.123602 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
[ 2918.124034 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:765
ERROR: status = -30
[ 2918.124452 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:795
ERROR: status = -30
[ 2918.124883 ][ T275 ] (kworker/u135:1,275,11):ocfs2_start_trans:357
ERROR: status = -30
[ 2918.125276 ][ T275 ] OCFS2: abort (device dm-0): ocfs2_start_trans:
Detected aborted journal
[ 2918.125710 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
=====================================================================
ocfs2_release_dquot() is much like dquot_release(), which is called by
ext4 to handle similar situation. So here fix it by marking the dquot as
inactive like what dquot_release() does.
Link: https://lkml.kernel.org/r/20250106140653.92292-1-glass.su@suse.com
Fixes: 9e33d69f55 ("ocfs2: Implementation of local and global quota file handling")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Correct the value of l_next_free_rec to l_count during the online check,
as done in the check_el() function in ocfs2_tools.
Link: https://lkml.kernel.org/r/20250106023432.1320904-2-sunjunchao2870@gmail.com
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
get_maintainers.pl doesn't expect list entries to have a display name.
Entries with a display name are omitted and print just the description:
(open list:PIN CONTROLLER - FREESCALE)
These cases are pretty much aliases to a few people, not lists which are
archived and can be subscribed to. Change these cases to be reviewers
instead.
Link: https://lkml.kernel.org/r/20241231155415.186244-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
s/kthread_worker_create/kthread_create_worker/ to avoid confusion when
reading comments before kthread_queue_work().
Link: https://lkml.kernel.org/r/20241224095344.GA7587@didi-ThinkCentre-M930t-N000
Signed-off-by: Tio Zhang <tiozhang@didiglobal.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
squashfs_fill_page is only used in this file, so make it static.
Use kmap_local instead of kmap_atomic, and return a bool so that
the caller can use folio_end_read() which saves an atomic operation
over calling folio_mark_uptodate() followed by folio_unlock().
[willy@infradead.org: fix polarity of "uptodate" Thanks to Ryan for testing]
Link: https://lkml.kernel.org/r/20250110163300.3346321-2-willy@infradead.org
Link: https://lkml.kernel.org/r/20241220224634.723899-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove accesses to page->index and page->mapping. Also use folio
APIs where available. This code still assumes order 0 folios.
[dan.carpenter@linaro.org: fix a NULL vs IS_ERR() bug]
Link: https://lkml.kernel.org/r/7b7f44d6-9153-4d7c-b65b-2d78febe6c7a@stanley.mountain
Link: https://lkml.kernel.org/r/20241220224634.723899-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove a few accesses to page->mapping.
Link: https://lkml.kernel.org/r/20241220224634.723899-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use modern folio APIs where they exist and convert back to struct
page for the internal functions.
Link: https://lkml.kernel.org/r/20241220224634.723899-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch updates the following which are out of date.
- Zstd has been added to the compression algorithms supported.
- The filesystem mailing list (for the kernel code) is changed to
linux-fsdevel rather than the now very little used Sourceforge
mailing list.
- The Squashfs website has been changed to the Squashfs-tools github
repository.
- The fact that Squashfs-tools is likely packaged by the linux
distribution is mentioned.
Link: https://lkml.kernel.org/r/20241229233752.54481-4-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If Squashfs has been configured to directly read datablocks into the page
cache (SQUASHFS_FILE_DIRECT), then the read_page cache is unnecessary.
This improvement is due to the following two commits, which added the
ability to read datablocks into the page cache when pages were missing,
enabling the fallback which used an intermediate buffer to be removed.
commit f268eedddf ("squashfs: extend "page actor" to handle missing pages")
commit 1bb1a07afa ("squashfs: don't use intermediate buffer if pages missing")
This reduces the amount of memory used when mounting a filesystem by
block_size * maximum number of threads.
Link: https://lkml.kernel.org/r/20241229233752.54481-3-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "squashfs: reduce memory usage and update docs".
This patchset reduces the amount of memory that Squashfs uses when
CONFIG_FILE_DIRECT is configured, and updates various out of date
information in the documentation and Kconfig.
This patch (of 4):
Make squashfs_cache_init() return an ERR_PTR(-ENOMEM) on failure rather
than NULL.
This tidies up some calling code, but, it also allows NULL to be returned
as a valid result when a cache hasn't be allocated.
Link: https://lkml.kernel.org/r/20241229233752.54481-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20241229233752.54481-2-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When testing the atomic write fix patches, the f2fs_bug_on was
triggered as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:935!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 UID: 0 PID: 257 Comm: bash Not tainted 6.13.0-rc1-00033-gc283a70d3497 #5
RIP: 0010:f2fs_evict_inode+0x50f/0x520
Call Trace:
<TASK>
? __die_body+0x65/0xb0
? die+0x9f/0xc0
? do_trap+0xa1/0x170
? f2fs_evict_inode+0x50f/0x520
? f2fs_evict_inode+0x50f/0x520
? handle_invalid_op+0x65/0x80
? f2fs_evict_inode+0x50f/0x520
? exc_invalid_op+0x39/0x50
? asm_exc_invalid_op+0x1a/0x20
? __pfx_f2fs_get_dquots+0x10/0x10
? f2fs_evict_inode+0x50f/0x520
? f2fs_evict_inode+0x2e5/0x520
evict+0x186/0x2f0
prune_icache_sb+0x75/0xb0
super_cache_scan+0x1a8/0x200
do_shrink_slab+0x163/0x320
shrink_slab+0x2fc/0x470
drop_slab+0x82/0xf0
drop_caches_sysctl_handler+0x4e/0xb0
proc_sys_call_handler+0x183/0x280
vfs_write+0x36d/0x450
ksys_write+0x68/0xd0
do_syscall_64+0xc8/0x1a0
? arch_exit_to_user_mode_prepare+0x11/0x60
? irqentry_exit_to_user_mode+0x7e/0xa0
The root cause is: f2fs uses FI_ATOMIC_DIRTIED to indicate dirty
atomic files during commit. If the inode is dirtied during commit,
such as by f2fs_i_pino_write, the vfs inode keeps clean and the
f2fs inode is set to FI_DIRTY_INODE. The FI_DIRTY_INODE flag cann't
be cleared by write_inode later due to the clean vfs inode. Finally,
f2fs_bug_on is triggered due to this inconsistent state when evict.
To reproduce this situation:
- fd = open("/mnt/test.db", O_WRONLY)
- ioctl(fd, F2FS_IOC_START_ATOMIC_WRITE)
- mv /mnt/test.db /mnt/test1.db
- ioctl(fd, F2FS_IOC_COMMIT_ATOMIC_WRITE)
- echo 3 > /proc/sys/vm/drop_caches
To fix this problem, clear FI_DIRTY_INODE after commit, then
f2fs_mark_inode_dirty_sync will ensure a consistent dirty state.
Fixes: fccaa81de8 ("f2fs: prevent atomic file from being dirtied before commit")
Signed-off-by: Yunlei He <heyunlei@xiaomi.com>
Signed-off-by: Jianan Huang <huangjianan@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A simple fix for mishandling of some clk_get_optional() return codes in
the OMAP driver, the problem was reported against stable kernels on a
few platforms after an earlier incomplete fix was backported.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeT1doACgkQJNaLcl1U
h9BwOQf/TD8n9gpr+Gbvntg5PwoGTcJ156AgnVd5qk61jkIrkeXTXsMNDPZpMEFI
mKFgRaj/GKzkUZXc2WmVQp+xG2J+PF+u4JEW+w7vcdJpdH2dvUjm/LyiUzibVMgA
Ai6ZdLaqNlcD8aGIn35pRrgmmiy7+u+YxPtmuC6P0x3pG4HFPvBawJtb0WGg867t
L/Gkc2UfWAYDxZ2tBPapspt2GGdpuCb306SRyaHW5sXgMsy+PhV/K8Kg+WPzhZCQ
LsxJtx+gw/1lVPoDpqwjWlk7uYL34u4KkPOyDOx2G9K6tw7UKsfNLEAiG4+2HwsR
z4UiwuufYwSyHPhgU+HL1UupLYQcRQ==
=M9a4
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A simple fix for mishandling of some clk_get_optional() return codes
in the OMAP driver, the problem was reported against stable kernels on
a few platforms after an earlier incomplete fix was backported"
* tag 'spi-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Correctly handle devm_clk_get_optional() errors
The max GSP message element size is 16 pages (including the headers). To
send a message larger than 16 pages, nvkm should split it into multiple
and send them accordingly. The first element has the expected function
number, while the rest are sent with function number as
NV_VGPU_MSG_FUNCTION_CONTINUATION_RECORD. GSP consumes the elements from
the cmdq and always writes the result back to the msgq. The result is also
formed as split elements.
However, nvkm is able to split the large GSP message and send them, but
totally not aware of handling the return of the large GSP message, which
are the split elements in the msgq. Thus, it keeps dumping the unknown RPC
messages from msgq, which is actually CONTINUATION_RECORD message,
discard them unexpectedly. Thus, the caller will not be able to consume
the result from GSP.
Introduce the handling of the return of large GSP message on the msgq path.
Slightly re-factor the low-level part of msg receiving routines. Merge the
split elements back into a large element before handling it to the upper
level. Thus, the upper-level of GSP RPC APIs don't need to be heavily
changed.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-15-zhiw@nvidia.com
Prepare for supporting receive the large GSP RPC message.
Factor out r535_gsp_msgq_recv_one_elem(). Fold its params into a data
structure of params. Move the allocation of the GSP RPC message to its
caller. Refine the variable names in the re-factor.
No functional change is intended.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-14-zhiw@nvidia.com
To receive a GSP message queue element from the GSP status queue, the
driver needs to make sure there are available elements in the queue.
The previous r535_gsp_msgq_wait() consists of three functions, which is
a little too complicated for a single function:
- wait for an available element.
- peek the message element header in the queue.
- recevice the element from the queue.
Factor out r535_gsp_msgq_peek() and divide the functions in
r535_gsp_msgq_wait() into three functions.
No functional change is intended.
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-13-zhiw@nvidia.com
The variable "msg" in r535_gsp_msg_recv() actually means the GSP RPC.
Refine the names to align with the terms in the kernel doc.
No functional change is intended.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-11-zhiw@nvidia.com
The variable names in r535_gsp_rpc_push() are quite confusing and some
of them are not representing what they really are.
Update the names and explanations in the decoder section of the
kernel doc. Refine the names to align with the terms in the kernel doc.
No functional change is intended.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-10-zhiw@nvidia.com
There has been a GSP_MSG_MAX_SIZE which represents the max size of a GSP
message element header. Use it instead of a magic number.
No functional change is intended.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-9-zhiw@nvidia.com
The macro GSP_MSG_MAX_SIZE refers to another macro that doesn't exist.
It represents the max GSP message element size.
Fix the broken marco so it can be used to replace some magic numbers in
the code.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-8-zhiw@nvidia.com
The name "argc" has different meanings in different functions.
To improve the readability, it's better to refine it to a name that
reflects what it represents.
Rename "argc" to what it represents. Add terms in the decoder section to
explain their meaning.
No functional change is intended.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
[ Fix indentation. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-7-zhiw@nvidia.com
The name "argv" has different meanings in different functions.
To improve the readability, it's better to refine it to a name that
reflects what it represents.
Rename "argv" to what it represents. Wrap the long container_of() into
to_payload_header() to denote a clear meaning and make checkpatch.pl
happy.
No functional change is intended.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-6-zhiw@nvidia.com
The name "argv" has different meanings in different functions.
To improve the readability, it's better to refine it to a name that
reflects what it represents.
Rename "repc" to what it represents in the GSP message send path.
Wrap the long container_of() into to_gsp_hdr() to make checkpatch.pl
happy.
No functional change is intended.
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-4-zhiw@nvidia.com
The name "repc" has different meanings in different contexts.
To improve the readability, it's better to refine it to a name that
reflects what it actually represents.
Rename "repc" to "gsp_rpc_len" in the GSP message recv path. Add an
section in the doc to explain the terms.
No functional change is intended.
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-3-zhiw@nvidia.com
In order to explain the name clean-ups in GSP RPC routines, a kernel
doc to explain the memory layout and terms is required.
Add a kernel doc to introduce the GSP RPC.
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
[ Fix bullet list indentation; add SPDX-License-Identifier. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124182958.2040494-2-zhiw@nvidia.com
Core:
- Improve initialization of numbered I2C adapters
Drivers:
- use parity8 helper
- dw: fix possible use-after-free
- mipi-i3c-hci: add support for PCI bus host
- svc: many fixes for IBI and hotjoin
-----BEGIN PGP SIGNATURE-----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=esI9
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"The main change is the addition of PCI bus support for mipi-i3c-hci.
I'm also carrying an hwmon patch as it makes use of the bitops
addition that is then mainly used by i3c drivers.
Core:
- Improve initialization of numbered I2C adapters
Drivers:
- use parity8 helper
- dw: fix possible use-after-free
- mipi-i3c-hci: add support for PCI bus host
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Improve initialization of numbered I2C adapters
i3c: master: Fix missing 'ret' assignment in set_speed()
i3c: cdns: use parity8 helper instead of open coding it
i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
i3c: dw: use parity8 helper instead of open coding it
hwmon: (spd5118) Use generic parity calculation
bitops: add generic parity calculation for u8
i3c: mipi-i3c-hci: Add support for MIPI I3C HCI on PCI bus
i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming
i3c: fix kdoc parameter description for module_i3c_i2c_driver()
i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the efivarfs
filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another OS
running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ5IH+gAKCRAwbglWLn0t
XHyMAP9Mqn5dD4XT22gvTRUrJuVYFLBlN+9d8ysRMjRVCzGwCQEAvCUJMy5Kje0J
h9i2InWjjPOVATx5hTrEoIEl96BGOgk=
=3Hnk
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the
efivarfs filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another
OS running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
* tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (23 commits)
x86/efi: skip memattr table on kexec boot
efivarfs: add variable resync after hibernation
efivarfs: abstract initial variable creation routine
efi: libstub: Use '-std=gnu11' to fix build with GCC 15
selftests/efivarfs: add concurrent update tests
selftests/efivarfs: fix tests for failed write removal
efivarfs: fix error on write to new variable leaving remnants
efivarfs: remove unused efivarfs_list
efivarfs: move variable lifetime management into the inodes
selftests/efivarfs: add check for disallowing file truncation
efivarfs: prevent setting of zero size on the inodes in the cache
efi: sysfb_efi: fix W=1 warnings when EFI is not set
efi/libstub: Use __free() helper for pool deallocations
efi/libstub: Use cleanup helpers for freeing copies of the memory map
efi/libstub: Simplify PCI I/O handle buffer traversal
efi/libstub: Refactor and clean up GOP resolution picker code
efi/libstub: Simplify GOP handling code
efi/libstub: Use C99-style for loop to traverse handle buffer
x86/efistub: Drop long obsolete UGA support
efivarfs: make variable_is_present use dcache lookup
...
Using the scripts at:
https://gitlab.arm.com/telemetry-solution/telemetry-solution/
Generate perf json for neoverse-v3 using the following command:
```
$ telemetry-solution/tools/perf_json_generator/generate.py \
tools/perf/ --telemetry-files \
telemetry-solution/data/pmu/cpu/neoverse/neoverse-v3.json
```
Signed-off-by: Ian Rogers <irogers@google.com>
[Re-generate after updating script]
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250122163504.2061472-3-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Using the scripts at:
https://gitlab.arm.com/telemetry-solution/telemetry-solution/
Generate perf json for neoverse-n3 using the following command:
```
$ telemetry-solution/tools/perf_json_generator/generate.py \
tools/perf/ --telemetry-files \
telemetry-solution/data/pmu/cpu/neoverse/neoverse-n3.json
```
Signed-off-by: Ian Rogers <irogers@google.com>
[Re-generate after updating script]
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250122163504.2061472-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power Domain
Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom QCS8300
remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and NXP iMX35
GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out some
x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling
-----BEGIN PGP SIGNATURE-----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=3bID
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
As usual, a number of new drivers get added to the defconfig to
support additional hardware. The stm32 defconfig also turns off
a few options to optimize for size.
-----BEGIN PGP SIGNATURE-----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=ZFLM
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, a number of new drivers get added to the defconfig to
support additional hardware.
The stm32 defconfig also turns off a few options to optimize for size"
* tag 'soc-defconfig-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
dt-bindings: soc: samsung: exynos-pmu: Add exynos990-pmu compatible
arm64: defconfig: enable Maxim TCPCI driver
ARM: configs: stm32: Remove useless flags in STM32 defconfig
ARM: configs: stm32: Remove CRYPTO in STM32 defconfig
ARM: configs: stm32: Clean STM32 defconfig
ARM: configs: stm32: Remove FLASH_MEM_BASE and FLASH_SIZE in STM32 defconfig
arm64: defconfig: Enable pinctrl-based I2C mux
arm64: defconfig: Enable Rockchip extensions for Synopsys DW HDMI QP
arm64: defconfig: Enable RFKILL GPIO
arm64: defconfig: Enable TI K3 M4 remoteproc driver
arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller
arm64: defconfig: Enable basic Qualcomm SM8750 SoC drivers
arm64: defconfig: remove obsolete CONFIG_SM_DISPCC_8650
arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
arm64: defconfig: Enable sa8775p clock controllers
arm64: defconfig: Enable MediaTek DWMAC
arm64: defconfig: Enable sound for MT8188
arm64: defconfig: Enable MediaTek STAR Ethernet MAC
riscv: defconfig: enable pinctrl and dwmac support for TH1520
arm64: defconfig: Enable Amazon Elastic Network Adaptor
...
These are changes to SoC specific drivers and DT bindings that don't have
a separate subsystem tree, or that get grouped here for simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding support
for additional SoCs in the exssting drivers, and support for wrapped
encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx and
renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the code
and adding a few interfaces to other drivers.
-----BEGIN PGP SIGNATURE-----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=oeUS
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
Add a helper drm_dp_mst_get_ufp_num_at_lct_from_rad() to extract the up
facing port number at specific link count from the RAD. Use the added
helper in drm_dp_mst_rad_to_str() & drm_dp_get_mst_branch_device() to
unify the implementation.
V2:
- Adjust the code format (Lyude)
V3:
- Adjust parameter "rad" of drm_dp_mst_get_ufp_num_at_lct_from_rad() to
be constant (Kernel test robot)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
[fixed commit message typo]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-3-Wayne.Lin@amd.com
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
u8 RAD[0] = (LCT_2_UFP << 4) | LCT_3_UFP
RAD[1] = (LCT_4_UFP << 4) | LCT_5_UFP
...
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6ea ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com
We see the addition of eleven new SoCs, including a total of sixx arm64
chips from Qualcomm alone. Overall, the Qualcomm platforms once again
make up the majority of all changes, after a couple of quieter releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of
the V4H (R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips
using Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial
IOT platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that
only need new devicetree files. Two additional SoCs in new
families are part of a separate branch.
There are 48 new machines in total, including six arm32 ones based
on aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores,
and a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP, Mediatek,
Qualcomm, Renesas and Rockchips and cover development boards, phones,
laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features.
-----BEGIN PGP SIGNATURE-----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=vdmR
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"We see the addition of eleven new SoCs, including a total of sixx
arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once
again make up the majority of all changes, after a couple of quieter
releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H
(R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips using
Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT
platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that only
need new devicetree files. Two additional SoCs in new families are
part of a separate branch.
There are 48 new machines in total, including six arm32 ones based on
aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and
a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP,
Mediatek, Qualcomm, Renesas and Rockchips and cover development
boards, phones, laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features"
* tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits)
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
...
Two new SoC families are added here, with devicetree files and
a little bit of infrastructure to allow booting:
- Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming
Processor) cores for computation, and two small Cortex-A53 cores
that run the operating system.
- SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22
compatible CPU cores with vector support.
Also marketed at AI applications, it has a much slower NPU compared
to BLZP1600, but in turn focuses on the CPU performance
-----BEGIN PGP SIGNATURE-----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=clzA
-----END PGP SIGNATURE-----
Merge tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"Two new SoC families are added here, with devicetree files and a
little bit of infrastructure to allow booting:
- Blaize BLZP1600 is an AI chip using custom GSP (Graph Streaming
Processor) cores for computation, and two small Cortex-A53 cores
that run the operating system.
- SpacemiT K1 is a 64-bit RISC-V chip, using eight custom RVA22
compatible CPU cores with vector support.
Also marketed at AI applications, it has a much slower NPU compared
to BLZP1600, but in turn focuses on the CPU performance"
* tag 'soc-new-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: spacemit: move aliases to board dts
riscv: dts: spacemit: add pinctrl property to uart0 in BPI-F3
riscv: defconfig: enable SpacemiT SoC
riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
riscv: dts: add initial SpacemiT K1 SoC device tree
riscv: add SpacemiT SoC family Kconfig support
dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
dt-bindings: timer: Add SpacemiT K1 CLINT
dt-bindings: riscv: add SpacemiT K1 bindings
dt-bindings: riscv: Add SpacemiT X60 compatibles
MAINTAINERS: setup support for SpacemiT SoC tree
MAINTAINER: Add entry for Blaize SoC
arm64: defconfig: Enable Blaize BLZP1600 platform
arm64: dts: Add initial support for Blaize BLZP1600 CB2
arm64: Add Blaize BLZP1600 SoC family
dt-bindings: arm: blaize: Add Blaize BLZP1600 SoC
dt-bindings: Add Blaize vendor prefix
