It was mentioned in a review that there is a possibility of choosing
to load the module with VF in execlists mode.
Of course this doesn't work, just bomb out as hard as possible.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-12-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
devm_clk_get_optional() returns NULL for missing clocks and a PTR_ERR()
if there is a clock but we fail to get it, but currently we only handle
the latter case and do so as though the clock was missing. If we get an
error back we should handle that as an error since the clock exists but
we failed to get it, if we get NULL then the clock doesn't exist and we
should handle that.
Fixes: 4c6ac5446d ("spi: omap2-mcspi: Fix the IS_ERR() bug for devm_clk_get_optional_enabled()")
Reported-by: Lars Pedersen <lapeddk@gmail.com>
Link: https://patch.msgid.link/20250117-spi-fix-omap2-optional-v1-1-e77d4ac6db6e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Lars Pedersen <lapeddk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Both kcryptd_io_read() and kcryptd_crypt_write_convert() will invoke
crypt_alloc_buffer() to allocate a new bio. Both of these two callers
initialize bi_iter.bi_sector for the new bio separatedly after
crypt_alloc_buffer() returns. However, kcryptd_crypt_write_convert()
will copy the bi_iter of the new bio into ctx.iter_out or ctx.iter_in.
Although it doesn't incur any harm now, it is better to fully initialize
bi_iter before it is used.
Therefore, initialize bi_iter.bi_sector in crypt_alloc_buffer() instead.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Both kcryptd_crypt_write_continue() and kcryptd_crypt_read_continue()
are running in the kworker context, it is OK to call cond_resched(),
Therefore, set atomic as false when invoking crypt_convert() under
kworker context.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
set_delayed() adjusts cfs_rq->h_nr_runnable for the hierarchy when an
entity is delayed irrespective of whether the entity corresponds to a
task or a cfs_rq.
Consider the following scenario:
root
/ \
A B (*) delayed since B is no longer eligible on root
| |
Task0 Task1 <--- dequeue_task_fair() - task blocks
When Task1 blocks (dequeue_entity() for task's se returns true),
dequeue_entities() will continue adjusting cfs_rq->h_nr_* for the
hierarchy of Task1. However, when the sched_entity corresponding to
cfs_rq B is delayed, set_delayed() will adjust the h_nr_runnable for the
hierarchy too leading to both dequeue_entity() and set_delayed()
decrementing h_nr_runnable for the dequeue of the same task.
A SCHED_WARN_ON() to inspect h_nr_runnable post its update in
dequeue_entities() like below:
cfs_rq->h_nr_runnable -= h_nr_runnable;
SCHED_WARN_ON(((int) cfs_rq->h_nr_runnable) < 0);
is consistently tripped when running wakeup intensive workloads like
hackbench in a cgroup.
This error is self correcting since cfs_rq are per-cpu and cannot
migrate. The entitiy is either picked for full dequeue or is requeued
when a task wakes up below it. Both those paths call clear_delayed()
which again increments h_nr_runnable of the hierarchy without
considering if the entity corresponds to a task or not.
h_nr_runnable will eventually reflect the correct value however in the
interim, the incorrect values can still influence PELT calculation which
uses se->runnable_weight or cfs_rq->h_nr_runnable.
Since only delayed tasks take the early return path in
dequeue_entities() and enqueue_task_fair(), adjust the
h_nr_runnable in {set,clear}_delayed() only when a task is delayed as
this path skips the h_nr_* update loops and returns early.
For entities corresponding to cfs_rq, the h_nr_* update loop in the
caller will do the right thing.
Fixes: 76f2f78329 ("sched/eevdf: More PELT vs DELAYED_DEQUEUE")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Link: https://lkml.kernel.org/r/20250117105852.23908-1-kprateek.nayak@amd.com
When testing on my tiled display, initially the tiled display is
detected correctly:
[90376.523692] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] fallback: Not all outputs enabled
[90376.523713] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] Enabled: 0, detected: 2
...
[90376.523967] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 1920x2160 set (1920,0)
[90376.524020] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:134:pipe B] desired mode 1920x2160 set (0,0)
But then, when modes have been set:
[90379.729525] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] [CONNECTOR:287:DP-4] on [CRTC:82:pipe A]: 1920x2160
[90379.729640] xe 0000:67:00.0: [drm:drm_client_firmware_config.isra.0 [drm]] [CONNECTOR:289:DP-5] on [CRTC:134:pipe B]: 1920x2160
...
[90379.730036] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 1920x2160 set (0,0)
[90379.730124] xe 0000:67:00.0: [drm:drm_client_modeset_probe [drm]] [CRTC:134:pipe B] desired mode 1920x2160 set (0,0)
Call drm_client_get_tile_offsets() in drm_client_firmware_config() as
well, to ensure that the offset is set correctly.
This has to be done as a separate pass, as the tile order may not be
equal to the drm connector order.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
Tiled displays have a different x/y offset to begin with. Instead of
attempting to remember this, just apply a delta instead.
This fixes the first tile being duplicated on other tiles when vt
switching.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116142825.3933-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: <stable@vger.kernel.org>
A specific allocation for the CRTC is not strictly necessary at this
point, but in order to implement dynamic configuration of VKMS (configFS),
it will be easier to have one allocation per CRTC.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-3-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
A specific allocation for the encoder is not strictly necessary at this
point, but in order to implement dynamic configuration of VKMS (configFS),
it will be easier to have one allocation per encoder.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-2-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
A specific allocation for the connector is not strictly necessary
at this point, but in order to implement dynamic configuration of
VKMS (configFS), it will be easier to have one allocation per
connector.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117-b4-vkms-allocated-v4-1-8ec8fd21aaf6@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Currently we are forcing full modeset if Panel Replay mode is changed. This
is not necessary as long as we are not changing sink PANEL REPLAY ENABLE
bit in PANEL REPLAY ENABLE AND CONFIGURATION 1 register. This can be
achieved by entering Panel Replay inactive mode (Live Frame mode) when
Panel Replay is disabled and keep PANEL REPLAY ENABLE bit in PANEL REPLAY
ENABLE AND CONFIGURATION 1 enabled always if panel is just supporting Panel
Replay.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109103532.2093356-5-jouni.hogander@intel.com
Currently we are configuring Panel Replay on sink when it get's
enabled. This means we need to do full modeset when enabling Panel
Replay. This is required as DP specification is saying sink Panel Replay
needs to be configured before link training. Avoid full modeset by enabling
Panel Replay on sink always when it's supported by the sink and the
source.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109103532.2093356-3-jouni.hogander@intel.com
According to DP/eDP specification only DP_PANEL_REPLAY_ENABLE has to be set
prior link training. For this purpose add a new function which sets this
bit on sink side if Panel Replay is supported by the sink and the source.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250109103532.2093356-2-jouni.hogander@intel.com
The use of R7 in the SMCCC conflicts with the compiler's use of R7 as a frame
pointer in Thumb2 mode, which is forcibly enabled by Clang when profiling
hooks are inserted via the -pg switch.
This is a known issue and similar driver workaround this with a Makefile
ifdef. Exact workaround are applied in
drivers/firmware/arm_scmi/transports/Makefile and other similar driver.
Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501201840.XmpHXpQ4-lkp@intel.com/
Fixes: 82e703dd43 ("pmdomain: airoha: Add Airoha CPU PM Domain support")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20250120153817.11807-1-ansuelsmth@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The current VKMS driver uses non-managed function to create
writeback connectors. It is not an issue yet, but in order
to support multiple devices easily, convert this code to
use drm and device managed helpers.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-8-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The current implementation of drm_writeback_connector initialization does
not properly clean up all resources in case of failure (allocated
properties and possible_encoders). Add this cleaning in case of failure.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-6-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
As the old drm and the new drmm variants of drm_writeback_connector
requires almost the same initialization, create an internal helper to do
most of the initialization work.
Currently there is no cleanup function for writeback connectors. To allows
implementation of drmm variant of writeback connector, create a cleanup
function that can be used to properly remove all the writeback-specific
properties and allocations.
This also introduce an helper to cleanup only the drm_writeback_connector
properties, so it can be used during initialization to cleanup in case of
failure.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-5-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The current VKMS driver uses managed function to create crtc, but
don't use it to properly clean the crtc workqueue. It is not an
issue yet, but in order to support multiple devices easily,
convert this code to use drm and device managed helpers.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-4-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Add drmm_alloc_ordered_workqueue(), a helper that provides managed ordered
workqueue cleanup. The workqueue will be destroyed with the final
reference of the DRM device.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-3-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The current VKMS driver uses non-managed function to create encoders. It
is not an issue yet, but in order to support multiple devices easily,
convert this code to use drm and device managed helpers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-2-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The current VKMS driver uses non-managed function to create connectors. It
is not an issue yet, but in order to support multiple devices easily,
convert this code to use drm and device managed helpers.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250116-google-vkms-managed-v9-1-3e4ae1bd05a0@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
With vmalloc stack addresses enabled (CONFIG_VMAP_STACK=y) DCP trusted
keys can crash during en- and decryption of the blob encryption key via
the DCP crypto driver. This is caused by improperly using sg_init_one()
with vmalloc'd stack buffers (plain_key_blob).
Fix this by always using kmalloc() for buffers we give to the DCP crypto
driver.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 0e28bf61a5 ("KEYS: trusted: dcp: fix leak of blob encryption key")
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The global variable pkcs7 does not exist.
Drop the variable declaration, but keep the struct prototype needed for
is_key_on_revocation_list().
Reported by clang:
./include/keys/system_keyring.h:104:67: warning: declaration shadows a variable in the global scope [-Wshadow]
104 | static inline int is_key_on_revocation_list(struct pkcs7_message *pkcs7)
| ^
./include/keys/system_keyring.h:76:30: note: previous declaration is here
76 | extern struct pkcs7_message *pkcs7;
| ^
Fixes: 56c5812623 ("certs: Add EFI_CERT_X509_GUID support for dbx entries")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
i915 has this really nice, infrastructure where everything becomes
complicated, GGTT needs eviction, etc..
Lets not do that, and make the dumbest possible interface instead.
Try to retrieve the VMA from old_plane_state, or intel_fbdev if kernel
fb.
Link: https://patchwork.freedesktop.org/patch/msgid/20241206182032.196307-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Tested-by: Jani Saarinen <jani.saarinen@intel.com>
To determine CPU features during initialization, the nVHE hypervisor
utilizes sanitized values of the host's CPU features registers. These
values, stored in u64 idaa64*_el1_sys_val variables are updated by the
kvm_hyp_init_symbols() function at EL1. To ensure EL2 visibility with
the MMU off, the data cache needs to be flushed after these updates.
However, individually flushing each variable using
kvm_flush_dcache_to_poc() is inefficient.
These cpu feature variables would be part of the bss section of
the hypervisor. Hence, flush the entire bss section of hypervisor
once the initialization is complete.
Fixes: 6c30bfb18d ("KVM: arm64: Add handlers for protected VM System Registers")
Suggested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@google.com>
Link: https://lore.kernel.org/r/20250121044016.2219256-1-lokeshvutla@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
A logic inversion in rseq_reset_rseq_cpu_node_id() causes the rseq
unregistration to fail when rseq_validate_ro_fields() succeeds rather
than the opposite.
This affects both CONFIG_DEBUG_RSEQ=y and CONFIG_DEBUG_RSEQ=n.
Fixes: 7d5265ffcd ("rseq: Validate read-only fields under DEBUG_RSEQ config")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250116205956.836074-1-mathieu.desnoyers@efficios.com
- Add preempt lazy support
- Deprecate cxl and cxl flash driver
- Fix a possible IOMMU related OOPS at boot on pSeries
- Optimize sched_clock() in ppc32 by replacing mulhdu() by mul_u64_u64_shr()
Thanks to: Andrew Donnellan, Andy Shevchenko, Ankur Arora, Christophe Leroy,
Frederic Barrat, Gaurav Batra, Luis Felipe Hernandez, Michael Ellerman, Nilay
Shroff, Ricardo B. Marliere, Ritesh Harjani (IBM), Sebastian Andrzej Siewior,
Shrikanth Hegde, Sourabh Jain, Thorsten Blum, Zhu Jun.
-----BEGIN PGP SIGNATURE-----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=ctY4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Add preempt lazy support
- Deprecate cxl and cxl flash driver
- Fix a possible IOMMU related OOPS at boot on pSeries
- Optimize sched_clock() in ppc32 by replacing mulhdu() by
mul_u64_u64_shr()
Thanks to Andrew Donnellan, Andy Shevchenko, Ankur Arora, Christophe
Leroy, Frederic Barrat, Gaurav Batra, Luis Felipe Hernandez, Michael
Ellerman, Nilay Shroff, Ricardo B. Marliere, Ritesh Harjani (IBM),
Sebastian Andrzej Siewior, Shrikanth Hegde, Sourabh Jain, Thorsten Blum,
and Zhu Jun.
* tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix argument order to timer_sub()
powerpc/prom_init: Use IS_ENABLED()
powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW
powerpc: Use str_on_off() helper in check_cache_coherency()
powerpc: Large user copy aware of full:rt:lazy preemption
powerpc: Add preempt lazy support
powerpc/book3s64/hugetlb: Fix disabling hugetlb when fadump is active
powerpc/vdso: Mark the vDSO code read-only after init
powerpc/64: Use get_user() in start_thread()
macintosh: declare ctl_table as const
selftest/powerpc/ptrace: Cleanup duplicate macro definitions
selftest/powerpc/ptrace/ptrace-pkey: Remove duplicate macros
selftest/powerpc/ptrace/core-pkey: Remove duplicate macros
powerpc/8xx: Drop legacy-of-mm-gpiochip.h header
scsi/cxlflash: Deprecate driver
cxl: Deprecate driver
selftests/powerpc: Fix typo in test-vphn.c
powerpc/xmon: Use str_yes_no() helper in dump_one_paca()
powerpc/32: Replace mulhdu() by mul_u64_u64_shr()
When enabling a pass-through port an interrupt might come before psmouse
driver binds to the pass-through port. However synaptics sub-driver
tries to access psmouse instance presumably associated with the
pass-through port to figure out if only 1 byte of response or entire
protocol packet needs to be forwarded to the pass-through port and may
crash if psmouse instance has not been attached to the port yet.
Fix the crash by introducing open() and close() methods for the port and
check if the port is open before trying to access psmouse instance.
Because psmouse calls serio_open() only after attaching psmouse instance
to serio port instance this prevents the potential crash.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 100e16959c ("Input: libps2 - attach ps2dev instances as serio port's drvdata")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Confidential Computing:
* Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules.
CPU Features:
* Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation.
* Add hwcaps and selftests for the new (2024) dpISA extensions.
Documentation:
* Update EL3 (firmware) requirements for booting Linux on modern arm64
designs.
* Remove stale information about the kernel virtual memory map.
Miscellaneous:
* Minor cleanups and typo fixes.
Memory management:
* Fix vmemmap_check_pmd() to look at the PMD type bits
* LPA2 (52-bit physical addressing) cleanups and minor fixes.
* Adjust physical address space depending upon whether or not LPA2 is
enabled.
Perf and PMUs:
* Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
* Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
* Fix Designware PCIe PMU event numbering.
* Add generic branch events for the Apple M1 CPU PMU.
* Add support for Marvell Odyssey DDR and LLC-TAD PMUs.
* Cleanups to the Hisilicon DDRC and Uncore PMU code.
* Advertise discard mode for the SPE PMU.
* Add the perf users mailing list to our MAINTAINERS entry.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmeKZLcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNEQzB/0X2U89ZiqxIkTPQvfFrjN/uUGybkq59rEL
DfeoGukTgJIwc3GHWXXtQ//wuuYKdTeCXaIz5NFK3+7/wmKSLvjkexmue8pta6EY
5rx9bAPr/D8lAUvhKIN2l3pF/ygoRwDz+nT2yVQ1xlZxYJWX7ZIsMj7W7ceb5kdx
HRrTSQuhEEPREAWWO4oCMWl5SQZSrIflSE3Be/PsP0OhW6k//ZmWbcJTgUcHbKam
o2WtNjITyGzxMpRCcrGEZKoe9YcwSxiut/PoD7JuoB4C/rbsf1cdJ6uLmtvGJcZj
qsdRHhVfBzP1+ahONrDbiT3C2+s1UZySKdCDIxiYy6lB39wpP0dd
=E7Mf
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"We've got a little less than normal thanks to the holidays in
December, but there's the usual summary below. The highlight is
probably the 52-bit physical addressing (LPA2) clean-up from Ard.
Confidential Computing:
- Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules
CPU Features:
- Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation
- Add hwcaps and selftests for the new (2024) dpISA extensions
Documentation:
- Update EL3 (firmware) requirements for booting Linux on modern
arm64 designs
- Remove stale information about the kernel virtual memory map
Miscellaneous:
- Minor cleanups and typo fixes
Memory management:
- Fix vmemmap_check_pmd() to look at the PMD type bits
- LPA2 (52-bit physical addressing) cleanups and minor fixes
- Adjust physical address space depending upon whether or not LPA2 is
enabled
Perf and PMUs:
- Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
- Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
- Fix Designware PCIe PMU event numbering
- Add generic branch events for the Apple M1 CPU PMU
- Add support for Marvell Odyssey DDR and LLC-TAD PMUs
- Cleanups to the Hisilicon DDRC and Uncore PMU code
- Advertise discard mode for the SPE PMU
- Add the perf users mailing list to our MAINTAINERS entry"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
Documentation: arm64: Remove stale and redundant virtual memory diagrams
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
arm64: Remove duplicate included header
drivers/perf: apple_m1: Map generic branch events
arm64: rsi: Add automatic arm-cca-guest module loading
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
...
- Use the generic muldi3 libgcc function,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ45X7xUcZ2VlcnRAbGlu
dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XB4tQD/WKgZmWHvfi/9Tk7+c8WD/e2ApdQE
ZhL9q0AEUzumpH0A/2ROwftS1g39MXdITUfts2g5j2wQy2ePnRDOZmTtP9kA
=ZK3B
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Use the generic muldi3 libgcc function
- Miscellaneous fixes and improvements
* tag 'm68k-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: libgcc: Fix lvalue abuse in umul_ppmm()
m68k: vga: Fix I/O defines
zorro: Constify 'struct bin_attribute'
m68k: atari: Use str_on_off() helper in atari_nvram_proc_read()
m68k: Use kernel's generic muldi3 libgcc function
- Select config option KASAN_VMALLOC if KASAN is enabled
- Select config option VMAP_STACK unconditionally
- Implement arch_atomic_inc() / arch_atomic_dec() functions
which result in a single instruction if compiled for z196
or newer architectures
- Make layering between atomic.h and atomic_ops.h consistent
- Comment s390 preempt_count implementation
- Remove pre MARCH_HAS_Z196_FEATURES preempt count implementation
- GCC uses the number of lines of an inline assembly to calculate
number of instructions and decide on inlining. Therefore remove
superfluous new lines from a couple of inline assemblies.
- Provide arch_atomic_*_and_test() implementations that allow the
compiler to generate slightly better code.
- Optimize __preempt_count_dec_and_test()
- Remove __bootdata annotations from declarations in header files
- Add missing include of <linux/smp.h> in abs_lowcore.h to provide
declarations for get_cpu() and put_cpu() used in the code
- Fix suboptimal kernel image base when running make kasan.config
- Remove huge_pte_none() and huge_pte_none_mostly() as are identical
to the generic variants
- Remove unused PAGE_KERNEL_EXEC, SEGMENT_KERNEL_EXEC,
and REGION3_KERNEL_EXEC defines
- Simplify noexec page protection handling and change the page,
segment and region3 protection definitions automatically if the
instruction execution-protection facility is not available
- Save one instruction and prefer EXRL instruction over EX in
string, xor_*(), amode31 and other functions
- Create /dev/diag misc device to fetch diagnose specific
information from the kernel and provide it to userspace
- Retrieve electrical power readings using DIAGNOSE 0x324 ioctl
- Make ccw_device_get_ciw() consistent and use array indices
instead of pointer arithmetic
* s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into one place
- The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that in s390 code
- Add missing TLB range adjustment in pud_free_tlb()
- Improve topology setup by adding early polarization detection
- Fix length checks in codepage_convert() function
- The generic bitops implementation is nearly identical to the s390 one.
Switch to the generic variant and decrease a bit the kernel image size
- Provide an optimized arch_test_bit() implementation which makes use of
flag output constraint. This generates slightly better code
- Provide memory topology information obtanied with DIAGNOSE 0x310
using ioctl.
- Various other small improvements, fixes, and cleanups
These changes were added with a merge of 'pci-device-recovery' branch
- Add PCI error recovery status mechanism
- Simplify and document debug_next_entry() logic
- Split private data allocation and freeing out of debug file
open() and close() operations
- Add debug_dump() function that gets a textual representation
of a debug info (e.g. PCI recovery hardware error logs)
- Add formatted content of pci_debug_msg_id to the PCI report
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZ4pkVxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8GulAQDg/7pCj1fXH5XKN9W16972OYQD
pNwfCekw8suO8HUBCgEAkzdgTJC6/thifrnUt+Gj8HqASh//Qzw/6Q2Jk6595gk=
=lE3V
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Select config option KASAN_VMALLOC if KASAN is enabled
- Select config option VMAP_STACK unconditionally
- Implement arch_atomic_inc() / arch_atomic_dec() functions which
result in a single instruction if compiled for z196 or newer
architectures
- Make layering between atomic.h and atomic_ops.h consistent
- Comment s390 preempt_count implementation
- Remove pre MARCH_HAS_Z196_FEATURES preempt count implementation
- GCC uses the number of lines of an inline assembly to calculate
number of instructions and decide on inlining. Therefore remove
superfluous new lines from a couple of inline assemblies.
- Provide arch_atomic_*_and_test() implementations that allow the
compiler to generate slightly better code.
- Optimize __preempt_count_dec_and_test()
- Remove __bootdata annotations from declarations in header files
- Add missing include of <linux/smp.h> in abs_lowcore.h to provide
declarations for get_cpu() and put_cpu() used in the code
- Fix suboptimal kernel image base when running make kasan.config
- Remove huge_pte_none() and huge_pte_none_mostly() as are identical to
the generic variants
- Remove unused PAGE_KERNEL_EXEC, SEGMENT_KERNEL_EXEC, and
REGION3_KERNEL_EXEC defines
- Simplify noexec page protection handling and change the page, segment
and region3 protection definitions automatically if the instruction
execution-protection facility is not available
- Save one instruction and prefer EXRL instruction over EX in string,
xor_*(), amode31 and other functions
- Create /dev/diag misc device to fetch diagnose specific information
from the kernel and provide it to userspace
- Retrieve electrical power readings using DIAGNOSE 0x324 ioctl
- Make ccw_device_get_ciw() consistent and use array indices instead of
pointer arithmetic
- s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into
one place
- The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that in s390 code
- Add missing TLB range adjustment in pud_free_tlb()
- Improve topology setup by adding early polarization detection
- Fix length checks in codepage_convert() function
- The generic bitops implementation is nearly identical to the s390
one. Switch to the generic variant and decrease a bit the kernel
image size
- Provide an optimized arch_test_bit() implementation which makes use
of flag output constraint. This generates slightly better code
- Provide memory topology information obtanied with DIAGNOSE 0x310
using ioctl.
- Various other small improvements, fixes, and cleanups
Also, some changes came in through a merge of 'pci-device-recovery'
branch:
- Add PCI error recovery status mechanism
- Simplify and document debug_next_entry() logic
- Split private data allocation and freeing out of debug file open()
and close() operations
- Add debug_dump() function that gets a textual representation of a
debug info (e.g. PCI recovery hardware error logs)
- Add formatted content of pci_debug_msg_id to the PCI report
* tag 's390-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/futex: Fix FUTEX_OP_ANDN implementation
s390/diag: Add memory topology information via diag310
s390/bitops: Provide optimized arch_test_bit()
s390/bitops: Switch to generic bitops
s390/ebcdic: Fix length decrement in codepage_convert()
s390/ebcdic: Fix length check in codepage_convert()
s390/ebcdic: Use exrl instead of ex
s390/amode31: Use exrl instead of ex
s390/stackleak: Use exrl instead of ex in __stackleak_poison()
s390/lib: Use exrl instead of ex in xor functions
s390/topology: Improve topology detection
s390/tlb: Add missing TLB range adjustment
s390/pkey: Constify 'struct bin_attribute'
s390/sclp: Constify 'struct bin_attribute'
s390/pci: Constify 'struct bin_attribute'
s390/ipl: Constify 'struct bin_attribute'
s390/crypto/cpacf: Constify 'struct bin_attribute'
s390/qdio: Move memory alloc/pointer arithmetic for slib and sl into one place
s390/cio: Use array indices instead of pointer arithmetic
s390/qdio: Rename feature flag aif_osa to aif_qdio
...
On pSeries, when user attempts to use the same vfio container used by
different iommu group, the spapr_tce_set_window() returns -EPERM
and the subsequent cleanup leads to the below crash.
Kernel attempted to read user page (308) - exploit attempt?
BUG: Kernel NULL pointer dereference on read at 0x00000308
Faulting instruction address: 0xc0000000001ce358
Oops: Kernel access of bad area, sig: 11 [#1]
NIP: c0000000001ce358 LR: c0000000001ce05c CTR: c00000000005add0
<snip>
NIP [c0000000001ce358] spapr_tce_unset_window+0x3b8/0x510
LR [c0000000001ce05c] spapr_tce_unset_window+0xbc/0x510
Call Trace:
spapr_tce_unset_window+0xbc/0x510 (unreliable)
tce_iommu_attach_group+0x24c/0x340 [vfio_iommu_spapr_tce]
vfio_container_attach_group+0xec/0x240 [vfio]
vfio_group_fops_unl_ioctl+0x548/0xb00 [vfio]
sys_ioctl+0x754/0x1580
system_call_exception+0x13c/0x330
system_call_vectored_common+0x15c/0x2ec
<snip>
--- interrupt: 3000
Fix this by having null check for the tbl passed to the
spapr_tce_unset_window().
Fixes: f431a8cde7 ("powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries")
Cc: stable@vger.kernel.org
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/173674009556.1559.12487885286848752833.stgit@linux.ibm.com
The PE Reset State "0" returned by RTAS calls
"ibm_read_slot_reset_[state|state2]" indicates that the reset is
deactivated and the PE is in a state where MMIO and DMA are allowed.
However, the current implementation of "pseries_eeh_get_state()" does
not reflect this, causing drivers to incorrectly assume that MMIO and
DMA operations cannot be resumed.
The userspace drivers as a part of EEH recovery using VFIO ioctls fail
to detect when the recovery process is complete. The VFIO_EEH_PE_GET_STATE
ioctl does not report the expected EEH_PE_STATE_NORMAL state, preventing
userspace drivers from functioning properly on pseries systems.
The patch addresses this issue by updating 'pseries_eeh_get_state()'
to include "EEH_STATE_MMIO_ENABLED" and "EEH_STATE_DMA_ENABLED" in
the result mask for PE Reset State "0". This ensures correct state
reporting to the callers, aligning the behavior with the PAPR specification
and fixing the bug in EEH recovery for VFIO user workflows.
Fixes: 00ba05a12b ("powerpc/pseries: Cleanup on pseries_eeh_get_state()")
Cc: stable@vger.kernel.org
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Link: https://lore.kernel.org/stable/20241212075044.10563-1-nnmlinux%40linux.ibm.com
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250116103954.17324-1-nnmlinux@linux.ibm.com
-----BEGIN PGP SIGNATURE-----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=ufpE
-----END PGP SIGNATURE-----
Merge tag 'for-6.14/io_uring-20250119' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Not a lot in terms of features this time around, mostly just cleanups
and code consolidation:
- Support for PI meta data read/write via io_uring, with NVMe and
SCSI covered
- Cleanup the per-op structure caching, making it consistent across
various command types
- Consolidate the various user mapped features into a concept called
regions, making the various users of that consistent
- Various cleanups and fixes"
* tag 'for-6.14/io_uring-20250119' of git://git.kernel.dk/linux: (56 commits)
io_uring/fdinfo: fix io_uring_show_fdinfo() misuse of ->d_iname
io_uring: reuse io_should_terminate_tw() for cmds
io_uring: Factor out a function to parse restrictions
io_uring/rsrc: require cloned buffers to share accounting contexts
io_uring: simplify the SQPOLL thread check when cancelling requests
io_uring: expose read/write attribute capability
io_uring/rw: don't gate retry on completion context
io_uring/rw: handle -EAGAIN retry at IO completion time
io_uring/rw: use io_rw_recycle() from cleanup path
io_uring/rsrc: simplify the bvec iter count calculation
io_uring: ensure io_queue_deferred() is out-of-line
io_uring/rw: always clear ->bytes_done on io_async_rw setup
io_uring/rw: use NULL for rw->free_iovec assigment
io_uring/rw: don't mask in f_iocb_flags
io_uring/msg_ring: Drop custom destructor
io_uring: Move old async data allocation helper to header
io_uring/rw: Allocate async data through helper
io_uring/net: Allocate msghdr async data through helper
io_uring/uring_cmd: Allocate async data through generic helper
io_uring/poll: Allocate apoll with generic alloc_cache helper
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmeL6hoQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgppw2EADQV8nDgLRggZR+il4U03yKHXcQEdAX1GrB
Erowx+dasIJuh6kp3n6qRe9QD/pRqt1DKyLvXoWF8Qfuwq85j7oDnDDYxutNYT27
hDgrLJriJ3VeKYtTu+andHWt8P29b5h57UayInDOUJurEPA6rXyFZ5YVIti8n21K
uDOrQXiACG3qRWS2+p2f3UNhX0MkFNFdN/lxi13WMIJtRWF5bXAP+JOgIWCID4Ze
QuSY6rQD4dp4Q6M2erpX6tn0YZb7Hvw3rPjsd91n6jvYfTUVLH375zg8jCBpi6Wi
Syufbb8xcTtriVPTDRNu0ekjebkc8wD8ax/h86g0z9v3Ua4DlNmsx9eXrtv6r5nu
YXqDODOad6stI0+owFquW2vas0gHmfNSfyfGdlk2g24PMtP5Yx0V6FIEvwIeqnje
ghgxQvBuKUsdhqakByfNnc+XvXi3+RUJek8kvMeUSUQWT1IyMQqPOOk0yp9WdyWD
bY1f2ECP5BR1b37zYOyawewsI5xTupHUswn5a4r4qtGn3O15rGDkX98Nab5aLCnR
rW/DvX7+wT6gW9EwrRHiwjwfNDZbsJ9Ggu3lMhtUl5GUWdk58yTiVgKaHJLnlX9/
CKFKfyyIR1Vl8+gYIpemyFhhcoN+dCSf06ISkrg0jeS0/tYwydaAaCBPL5J4kxZA
h3Rtbh+Pgg==
=EXYs
-----END PGP SIGNATURE-----
Merge tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
In file common/smb2pdu.h is defined struct reparse_symlink_data_buffer
which is same as struct reparse_symlink_data and is used in the whole code.
So remove duplicate struct reparse_symlink_data from client/cifspdu.h.
In file common/smb2pdu.h is defined also SYMLINK_FLAG_RELATIVE constant, so
remove duplication from client/cifspdu.h.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In case of possible unpredictably large arguments passed to
rose_setsockopt() and multiplied by extra values on top of that,
integer overflows may occur.
Do the safest minimum and fix these issues by checking the
contents of 'opt' and returning -EINVAL if they are too large. Also,
switch to unsigned int and remove useless check for negative 'opt'
in ROSE_IDLE case.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250115164220.19954-1-n.zhandarovich@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some PHYs don't support clause 45 access, and return -EOPNOTSUPP from
phy_modify_mmd(), which causes phylink_bringup_phy() to fail. Prevent
this failure by allowing -EOPNOTSUPP to also mean success.
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1tZp1a-001V62-DT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The static function in trace_events.c called update_cache() is too generic
and conflicts with the function defined in arch/openrisc/include/asm/pgtable.h
Rename it to update_mod_cache() to make it less generic.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250120172756.4ecfb43f@batman.local.home
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501210550.Ufrj5CRn-lkp@intel.com/
Fixes: b355247df1 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: streamline RX/TX queue creation and cleanup
In this series we fix an issue with missing cleanups during
error path of am65_cpsw_nuss_init_tx/rx_chns() when used anywhere
other than at probe().
Then we streamline RX and TX queue creation and cleanup. The queues
can now be created or destroyed by calling the appropriate
functions am65_cpsw_create_rxqs/txqs() and am65_cpsw_destroy_rxq/txqs().
v1: https://lore.kernel.org/20250115-am65-cpsw-streamline-v1-0-326975c36935@kernel.org
====================
Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-0-91a29c97e569@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
