Make the inodes the default management vehicle for struct
efivar_entry, so they are now all freed automatically if the file is
removed and on unmount in kill_litter_super(). Remove the now
superfluous iterator to free the entries after kill_litter_super().
Also fixes a bug where some entry freeing was missing causing efivarfs
to leak memory.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that the ability of arbitrary writes to set the inode size is
fixed, verify that a variable file accepts a truncation operation but
does not change the stat size because of it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Current efivarfs uses simple_setattr which allows the setting of any
size in the inode cache. This is wrong because a zero size file is
used to indicate an "uncommitted" variable, so by simple means of
truncating the file (as root) any variable may be turned to look like
it's uncommitted. Fix by adding an efivarfs_setattr routine which
does not allow updating of the cached inode size (which now only comes
from the underlying variable).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
If an option is unknown to erofs, which means that option is not in
`erofs_fs_parameters`, `fs_parse` will return -ENOPARAM, which makes
`erofs_fc_parse_param` returns earlier.
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/DB86A4E2BB2BB44E+20250117100635.335963-2-chenlinxuan@uniontech.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
tcp rst/fin packet triggers an immediate teardown of the flow which
results in sending flows back to the classic forwarding path.
This behaviour was introduced by:
da5984e510 ("netfilter: nf_flow_table: add support for sending flows back to the slow path")
b6f27d322a ("netfilter: nf_flow_table: tear down TCP flows if RST or FIN was seen")
whose goal is to expedite removal of flow entries from the hardware
table. Before these patches, the flow was released after the flow entry
timed out.
However, this approach leads to packet races when restoring the
conntrack state as well as late flow re-offload situations when the TCP
connection is ending.
This patch adds a new CLOSING state that is is entered when tcp rst/fin
packet is seen. This allows for an early removal of the flow entry from
the hardware table. But the flow entry still remains in software, so tcp
packets to shut down the flow are not sent back to slow path.
If syn packet is seen from this new CLOSING state, then this flow enters
teardown state, ct state is set to TCP_CONNTRACK_CLOSE state and packet
is sent to slow path, so this TCP reopen scenario can be handled by
conntrack. TCP_CONNTRACK_CLOSE provides a small timeout that aims at
quickly releasing this stale entry from the conntrack table.
Moreover, skip hardware re-offload from flowtable software packet if the
flow is in CLOSING state.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tear down the flow entry in the unlikely case that the interface mtu
changes, this gives the flow a chance to refresh the cached mtu,
otherwise such refresh does not occur until flow entry expires.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Offload nf_conn entries may not see traffic for a very long time.
To prevent incorrect 'ct is stale' checks during nf_conntrack table
lookup, the gc worker extends the timeout nf_conn entries marked for
offload to a large value.
The existing logic suffers from a few problems.
Garbage collection runs without locks, its unlikely but possible
that @ct is removed right after the 'offload' bit test.
In that case, the timeout of a new/reallocated nf_conn entry will
be increased.
Prevent this by obtaining a reference count on the ct object and
re-check of the confirmed and offload bits.
If those are not set, the ct is being removed, skip the timeout
extension in this case.
Parallel teardown is also problematic:
cpu1 cpu2
gc_worker
calls flow_offload_teardown()
tests OFFLOAD bit, set
clear OFFLOAD bit
ct->timeout is repaired (e.g. set to timeout[UDP_CT_REPLIED])
nf_ct_offload_timeout() called
expire value is fetched
<INTERRUPT>
-> NF_CT_DAY timeout for flow that isn't offloaded
(and might not see any further packets).
Use cmpxchg: if ct->timeout was repaired after the 2nd 'offload bit' test
passed, then ct->timeout will only be updated of ct->timeout was not
altered in between.
As we already have a gc worker for flowtable entries, ct->timeout repair
can be handled from the flowtable gc worker.
This avoids having flowtable specific logic in the conntrack core
and avoids checking entries that were never offloaded.
This allows to remove the nf_ct_offload_timeout helper.
Its safe to use in the add case, but not on teardown.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its not used (and could be NULL), so remove it.
This allows to use nf_ct_refresh in places where we don't have
an skb without having to double-check that skb == NULL would be safe.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The conntrack entry is already public, there is a small chance that another
CPU is handling a packet in reply direction and racing with the tcp state
update.
Move this under ct spinlock.
This is done once, when ct is about to be offloaded, so this should
not result in a noticeable performance hit.
Fixes: 8437a6209f ("netfilter: nft_flow_offload: set liberal tracking mode for tcp")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This state reset is racy, no locks are held here.
Since commit
8437a6209f ("netfilter: nft_flow_offload: set liberal tracking mode for tcp"),
the window checks are disabled for normal data packets, but MAXACK flag
is checked when validating TCP resets.
Clear the flag so tcp reset validation checks are ignored.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
With conditional chain deletion gone, callback code simplifies: Instead
of filling an nft_ctx object, just pass basechain to the per-chain
function. Also plain list_for_each_entry() is safe now.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not drop a netdev-family chain if the last interface it is registered
for vanishes. Users dumping and storing the ruleset upon shutdown to
restore it upon next boot may otherwise lose the chain and all contained
rules. They will still lose the list of devices, a later patch will fix
that. For now, this aligns the event handler's behaviour with that for
flowtables.
The controversal situation at netns exit should be no problem here:
event handler will unregister the hooks, core nftables cleanup code will
drop the chain itself.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The 1:1 relationship between nft_hook and nf_hook_ops is about to break,
so choose the stored ifname to uniquely identify hooks.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The stored ifname and ops.dev->name may deviate after creation due to
interface name changes. Prefer the more deterministic stored name in
dumps which also helps avoiding inadvertent changes to stored ruleset
dumps.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Prepare for hooks with NULL ops.dev pointer (due to non-existent device)
and store the interface name and length as specified by the user upon
creation. No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When checking for duplicate hooks in nft_register_flowtable_net_hooks(),
comparing ops.pf value is pointless as it is always NFPROTO_NETDEV with
flowtable hooks.
Dropping the check leaves the search identical to the one in
nft_hook_list_find() so call that function instead of open coding.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The SKB_DROP_REASON_IP_INADDRERRORS drop reason is never returned from
any function, as such it cannot be returned from the ip_route_input call
tree. The 'reason != SKB_DROP_REASON_IP_INADDRERRORS' conditional is
thus always true.
Looking back at history, commit 50038bf38e ("net: ip: make
ip_route_input() return drop reasons") changed the ip_route_input
returned value check in br_nf_pre_routing_finish from -EHOSTUNREACH to
SKB_DROP_REASON_IP_INADDRERRORS. It turns out -EHOSTUNREACH could not be
returned either from the ip_route_input call tree and this since commit
251da41301 ("ipv4: Cache ip_error() routes even when not
forwarding.").
Not a fix as this won't change the behavior. While at it use
kfree_skb_reason.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The existing rbtree implementation uses singleton elements to represent
ranges, however, userspace provides a set size according to the number
of ranges in the set.
Adjust provided userspace set size to the number of singleton elements
in the kernel by multiplying the range by two.
Check if the no-match all-zero element is already in the set, in such
case release one slot in the set size.
Fixes: 0ed6389c48 ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Output of io_uring_show_fdinfo() has several problems:
* racy use of ->d_iname
* junk if the name is long - in that case it's not stored in ->d_iname
at all
* lack of quoting (names can contain newlines, etc. - or be equal to "<none>",
for that matter).
* lines for empty slots are pointless noise - we already have the total
amount, so having just the non-empty ones would carry the same information.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While fixing a shared VGA resource ownership issue, commit 5dd8b536bb
("drm/virtio: Lock the VGA resources during initialization") wrongly
assumed that there is always a PCI device associated with virtio-gpu
and it would return error if this device is not found during init.
This is incorrect, as virtio-gpu can be operated in MMIO mode (M68K)
where a PCI device would probably not be created for it. Therefore,
fix this issue by not erroring out if the associated PCI device is
not found during initialization.
Fixes: 5dd8b536bb ("drm/virtio: Lock the VGA resources during initialization")
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114075759.2616551-1-vivek.kasireddy@intel.com
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114075759.2616551-1-vivek.kasireddy@intel.com
Fix the following issues identified by Smatch static checker:
- The call to dma_buf_put(attach->dmabuf) after dma_buf_detach()
leads to a UAF bug as dma_buf_detach() frees the attach object.
Fix this by extracting the dmabuf object from attach and using
that in the call to dma_buf_put().
- The resv object is extracted from attach before checking to see
if attach is valid (that is !NULL) or not. Although, attach would
very likely be valid, fix this by making sure that the resv object
is used only after ensuring that attach is valid.
Fixes: 2885e575ab ("drm/virtio: Add helpers to initialize and free the imported object")
Fixes: ca77f27a26 ("drm/virtio: Import prime buffers from other devices as guest blobs")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212055421.775759-1-vivek.kasireddy@intel.com
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: Edited commit title]
Remove useless #ifdef RESET_USB_CONFIG code.
Change kalloc / memset to kzalloc
The attach function was not freeing the private data on error
returns. Separate the releasing of urbs and private data and
add a common error exit for attach failure.
Set the board private data pointer to NULL after freeing
the private data.
Reduce console spam by emitting only one attach message.
Change last pr_err in attach to dev_err
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250118145046.12181-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the detach function is called after a failed attach
the usb_dev initialization can cause a NULL pointer
dereference. This happens when the usb device is not found
in the attach procedure.
Remove the usb_dev variable and initialization and change the dev
in the dev_info message from the usb_dev to the gpib_dev.
Fixes: fbae7090f3 ("staging: gpib: Update messaging and usb_device refs in agilent_usb")
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250118145046.12181-2-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The test on whether rhashtable_insert_one did an insertion relies
on the value returned by rhashtable_lookup_one. Unfortunately that
value is overwritten after rhashtable_insert_one returns. Fix this
by moving the test before data gets overwritten.
Simplify the test as only data == NULL matters.
Finally move atomic_inc back within the lock as otherwise it may
be reordered with the atomic_dec on the removal side, potentially
leading to an underflow.
Reported-by: Michael Kelley <mhklinux@outlook.com>
Fixes: e1d3422c95 ("rhashtable: Fix potential deadlock by moving schedule_work outside lock")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document SM8750 compatible for the True Random Number Generator.
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Document the crypto engine on the SM8750 Platform.
Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
key_being_used_for[] is an unused array of textual names for
the elements of the enum key_being_used_for. It was added in 2015 by
commit 99db443506 ("PKCS#7: Appropriately restrict authenticated
attributes and content type")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Although the previous patch can avoid ps and ps UAF for _do_serial, it
can not avoid potential UAF issue for reorder_work. This issue can
happen just as below:
crypto_request crypto_request crypto_del_alg
padata_do_serial
...
padata_reorder
// processes all remaining
// requests then breaks
while (1) {
if (!padata)
break;
...
}
padata_do_serial
// new request added
list_add
// sees the new request
queue_work(reorder_work)
padata_reorder
queue_work_on(squeue->work)
...
<kworker context>
padata_serial_worker
// completes new request,
// no more outstanding
// requests
crypto_del_alg
// free pd
<kworker context>
invoke_padata_reorder
// UAF of pd
To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work'
into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish.
Fixes: bbefa1dd6a ("crypto: pcrypt - Avoid deadlock by using per-instance padata queues")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/
Fixes: b128a30409 ("padata: allocate workqueue internally")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Qu Zicheng <quzicheng@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add helpers for pd to get/put refcnt to make code consice.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- bump version strings, by Simon Wunderlich
- Reorder includes for distributed-arp-table.c, by Sven Eckelmann
- Fix translation table change handling, by Remi Pommarel (2 patches)
- Map VID 0 to untagged TT VLAN, by Sven Eckelmann
- Update MAINTAINERS/mailmap e-mail addresses, by the respective authors
(4 patches)
- netlink: reduce duplicate code by returning interfaces,
by Linus Lüssing
-----BEGIN PGP SIGNATURE-----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=cv/9
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Reorder includes for distributed-arp-table.c, by Sven Eckelmann
- Fix translation table change handling, by Remi Pommarel (2 patches)
- Map VID 0 to untagged TT VLAN, by Sven Eckelmann
- Update MAINTAINERS/mailmap e-mail addresses, by the respective authors
(4 patches)
- netlink: reduce duplicate code by returning interfaces,
by Linus Lüssing
* tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge:
batman-adv: netlink: reduce duplicate code by returning interfaces
MAINTAINERS: mailmap: add entries for Antonio Quartulli
mailmap: add entries for Sven Eckelmann
mailmap: add entries for Simon Wunderlich
MAINTAINERS: update email address of Marek Linder
batman-adv: Map VID 0 to untagged TT VLAN
batman-adv: Don't keep redundant TT change events
batman-adv: Remove atomic usage for tt.local_changes
batman-adv: Reorder includes for distributed-arp-table.c
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250117123910.219278-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmeKvq8RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtJ3wf/bMRrED1k1xtC117yxBthXOZj7Ae0MG3s
cqIDBZ2MSmi596jfmc/FRFTN6Rie7+WQg8MGhpWpJt4WyvCd+IqmluLwuJGg3oHz
KdDQHN766cPb50mykTBY0m+Uh9eqyhaoozzK+KbrJZNLUt/Ri3DOdPInWP/ODKuT
uo9xv25zmOMQuUJlhOlFpOW68y6isuMsnPpgTvbtjndw3nPe+tVIfGPdg3xeQnq1
SG05wmOeJ8obmO1VsnmHPN20F5PfS5t2asu12UafR7KTiJOdP2QXKGNTy+ag7fQ/
9Sq6SzuPpbHHJJ93f0aJOkTUKdQVmk2xfCYNOyPNu1ewLqiVlvnkew==
=Vu+D
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 1b23cdbd2b ("net: protect netdev->napi_list with netdev_lock()")
it makes sense to iterate through dev->napi_list while holding
the device lock.
Also call synchronize_net() at most one time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250117232113.1612899-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have some leftovers from the switch to linkmode bitmaps which
- have never been used
- are not used any longer
- have no user outside phy_device.c
So remove them.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/5493b96e-88bb-4230-a911-322659ec5167@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lion Ackermann was able to create a UAF which can be abused for privilege
escalation with the following script
Step 1. create root qdisc
tc qdisc add dev lo root handle 1:0 drr
step2. a class for packet aggregation do demonstrate uaf
tc class add dev lo classid 1:1 drr
step3. a class for nesting
tc class add dev lo classid 1:2 drr
step4. a class to graft qdisc to
tc class add dev lo classid 1:3 drr
step5.
tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024
step6.
tc qdisc add dev lo parent 1:2 handle 3:0 drr
step7.
tc class add dev lo classid 3:1 drr
step 8.
tc qdisc add dev lo parent 3:1 handle 4:0 pfifo
step 9. Display the class/qdisc layout
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 limit 1000p
qdisc drr 3: dev lo parent 1:2
step10. trigger the bug <=== prevented by this patch
tc qdisc replace dev lo parent 1:3 handle 4:0
step 11. Redisplay again the qdiscs/classes
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 1:3 root leaf 4: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p
qdisc drr 3: dev lo parent 1:2
Observe that a) parent for 4:0 does not change despite the replace request.
There can only be one parent. b) refcount has gone up by two for 4:0 and
c) both class 1:3 and 3:1 are pointing to it.
Step 12. send one packet to plug
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001))
step13. send one packet to the grafted fifo
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003))
step14. lets trigger the uaf
tc class delete dev lo classid 1:3
tc class delete dev lo classid 1:1
The semantics of "replace" is for a del/add _on the same node_ and not
a delete from one node(3:1) and add to another node (1:3) as in step10.
While we could "fix" with a more complex approach there could be
consequences to expectations so the patch takes the preventive approach of
"disallow such config".
Joint work with Lion Ackermann <nnamrec@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following trace can be seen if a device is being unregistered while
its number of channels are being modified.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120
CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771
RIP: 0010:__mutex_lock+0xc8a/0x1120
Call Trace:
<TASK>
ethtool_check_max_channel+0x1ea/0x880
ethnl_set_channels+0x3c3/0xb10
ethnl_default_set_doit+0x306/0x650
genl_family_rcv_msg_doit+0x1e3/0x2c0
genl_rcv_msg+0x432/0x6f0
netlink_rcv_skb+0x13d/0x3b0
genl_rcv+0x28/0x40
netlink_unicast+0x42e/0x720
netlink_sendmsg+0x765/0xc20
__sys_sendto+0x3ac/0x420
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is because unregister_netdevice_many_notify might run before the
rtnl lock section of ethnl operations, eg. set_channels in the above
example. In this example the rss lock would be destroyed by the device
unregistration path before being used again, but in general running
ethnl operations while dismantle has started is not a good idea.
Fix this by denying any operation on devices being unregistered. A check
was already there in ethnl_ops_begin, but not wide enough.
Note that the same issue cannot be seen on the ioctl version
(__dev_ethtool) because the device reference is retrieved from within
the rtnl lock section there. Once dismantle started, the net device is
unlisted and no reference will be found.
Fixes: dde91ccfa2 ("ethtool: do not perform operations on net devices being unregistered")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250116092159.50890-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds with gcc 14.2.1 report:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:4193:32: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size 27 [-Werror=format-truncation=]
4193 | "/pkg %s", buf);
It's upset that we let buf be full length but then we use 5
characters for "/pkg ".
The builds is also clear with clang version 19.1.5 now.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250117183726.1481524-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of SYN + MPC retransmissions before falling back to TCP was
fixed to 2. This is certainly a good default value, but having a fixed
number can be a problem in some environments.
The current behaviour means that if all packets are dropped, there will
be:
- The initial SYN + MPC
- 2 retransmissions with MPC
- The next ones will be without MPTCP.
So typically ~3 seconds before falling back to TCP. In some networks
where some temporally blackholes are unfortunately frequent, or when a
client tries to initiate connections while the network is not ready yet,
this can cause new connections not to have MPTCP connections.
In such environments, it is now possible to increase the number of SYN
retransmissions with MPTCP options to make sure MPTCP is used.
Interesting values are:
- 0: the first retransmission will be done without MPTCP options: quite
aggressive, but also a higher risk of detecting false-positive
MPTCP blackholes.
- >= 128: all SYN retransmissions will keep the MPTCP options: back to
the < 6.12 behaviour.
The default behaviour is not changed here.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250117-net-next-mptcp-syn_retrans_before_tcp_fallback-v1-1-ab4b187099b0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shinas Rasheed says:
====================
Fix race conditions in ndo_get_stats64
Fix race conditions in ndo_get_stats64 by storing tx/rx stats
locally and not availing per queue resources which could be torn
down during interface stop. Also remove stats fetch from
firmware which is currently unnecessary
====================
Link: https://patch.msgid.link/20250117094653.2588578-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update tx/rx stats locally, so that ndo_get_stats64()
can use that and not rely on per queue resources to obtain statistics.
The latter used to cause race conditions when the device stopped.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20250117094653.2588578-5-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update tx/rx stats locally, so that ndo_get_stats64()
can use that and not rely on per queue resources to obtain statistics.
The latter used to cause race conditions when the device stopped.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://patch.msgid.link/20250117094653.2588578-3-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of silently ignoring invalid/unsupported settings, report an
error. Additionally, relax the check for non-zero usecs to apply only
when it will be used (i.e. when frames != 1).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250116232954.2696930-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
