Russell King says:
====================
net: phylink: fix PCS without autoneg
Eric Woudstra reported that a PCS attached using 2500base-X does not
see link when phylink is using in-band mode, but autoneg is disabled,
despite there being a valid 2500base-X signal being received. We have
these settings:
act_link_an_mode = MLO_AN_INBAND
pcs_neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED
Eric diagnosed it to phylink_decode_c37_word() setting state->link
false because the full-duplex bit isn't set in the non-existent link
partner advertisement word (which doesn't exist because in-band
autoneg is disabled!)
The test in phylink_mii_c22_pcs_decode_state() is supposed to catch
this state, but since we converted PCS to use neg_mode, testing the
Autoneg in the local advertisement is no longer sufficient - we need
to be looking at the neg_mode, which currently isn't provided.
We need to provide this via the .pcs_get_state() method, and this
will require modifying all PCS implementations to add the extra
argument to this method.
Patch 1 uses the PCS neg_mode in phylink_mac_pcs_get_state() to correct
the now obsolute usage of the Autoneg bit in the advertisement.
Patch 2 passes neg_mode into the .pcs_get_state() method, and updates
all users.
Patch 3 adds neg_mode as an argument to the various clause 22 state
decoder functions in phylink, modifying drivers to pass the neg_mode
through.
Patch 4 makes use of phylink_mii_c22_pcs_decode_state() rather than
using the Autoneg bit in the advertising field.
Patch 5 may be required for Eric's case - it ensures that we report
the correct state for interface types that we support only one set
of modes for when autoneg is disabled.
====================
Link: https://patch.msgid.link/Z4TbR93B-X8A8iHe@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When decoding clause 22 state, if in-band is disabled and using either
1000base-X or 2500base-X, rather than reporting link-down, we know the
speed, and we only support full duplex. Pause modes taken from XPCS.
This fixes a problem reported by Eric Woudstra.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGei-000EtL-Fn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than using the state of the Autoneg bit, which is unreliable
with the new PCS neg mode support, use the passed neg_mode to decide
whether to decode the link partner advertisement data.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGed-000EtF-CN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the current neg_mode into phylink_mii_c22_pcs_get_state() and
phylink_mii_c22_pcs_decode_state(). Update all users of phylink PCS
that use these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeY-000Et9-8g@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As in-band AN no longer just depends on MLO_AN_INBAND + Autoneg bit,
we need to take account of the pcs_neg_mode when deciding how to
initialise the speed, duplex and pause state members before calling
into the .pcs_neg_mode() method. Add this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeO-000Esx-0r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xpcs_config_2500basex() sets DW_VR_MII_DIG_CTRL1_2G5_EN, but
xpcs_config_aneg_c37_sgmii() never unsets it. So, on a protocol change
from 2500base-x to sgmii, the DW_VR_MII_DIG_CTRL1_2G5_EN bit will remain
set.
Fixes: f27abde304 ("net: pcs: add 2500BASEX support for Intel mGbE controller")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250114164721.2879380-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a port with SGMII fixed-link at SPEED_1000, DW_VR_MII_DIG_CTRL1 gets
set to 0x2404. This is incorrect, because bit 2 (DW_VR_MII_DIG_CTRL1_2G5_EN)
is set.
It comes from the previous write to DW_VR_MII_AN_CTRL, because the "val"
variable is reused and is dirty. Actually, its value is 0x4, aka
FIELD_PREP(DW_VR_MII_PCS_MODE_MASK, DW_VR_MII_PCS_MODE_C37_SGMII).
Resolve the issue by clearing "val" to 0 when writing to a new register.
After the fix, the register value is 0x2400.
Prior to the blamed commit, when the read-modify-write was open-coded,
the code saved the content of the DW_VR_MII_DIG_CTRL1 register in the
"ret" variable.
Fixes: ce8d6081fc ("net: pcs: xpcs: add _modify() accessors")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250114164721.2879380-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: selftests: more debug in case of errors
Here are just a bunch of small improvements for the MPTCP selftests:
Patch 1: Unify errors messages in simult_flows: print MIB and 'ss -Me'.
Patch 2: Unify errors messages in sockopt: print MIB.
Patch 3: Move common code to print debug info to mptcp_lib.sh.
Patch 4: Use 'ss' with '-m' in case of errors.
Patch 5: Remove an unused variable.
Patch 6: Print only the size instead of size + filename again.
====================
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-0-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'du' will print the name of the file, which was already displayed
before, e.g.
Created /tmp/tmp.UOyy0ghfmQ (size 4703740/tmp/tmp.UOyy0ghfmQ) containing data sent by client
Created /tmp/tmp.xq3zvFinGo (size 1391724/tmp/tmp.xq3zvFinGo) containing data sent by server
'stat' can be used instead, to display this instead:
Created /tmp/tmp.UOyy0ghfmQ (size 4703740 B) containing data sent by client
Created /tmp/tmp.xq3zvFinGo (size 1391724 B) containing data sent by server
So easier to spot the file sizes.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-6-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, we had an issue where getting info about the memory would have
helped better understanding what went wrong.
Let add it just in case for later.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-4-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few MPTCP selftests are using the same code to print stats in case of
error. This code can then be moved to mptcp_lib.sh.
No behaviour changes intended, except to print the error in red and to
stderr, like most error messages.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-3-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the way nstat information is stored in mptcp_connect.sh
and mptcp_join.sh scripts, this patch adds a similar way for
mptcp_sockopt.sh and displays the nstat information when errors
occur.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-2-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to unify what is printed in case of error, similar to what is
done in mptcp_connect.sh and mptcp_join.sh, it is interesting to do the
following modifications in simult_flows.sh:
- Print the rc errors at the end of the line.
- Print the MIB counters.
- Use the same ss options: add -M (MPTCP sockets) and -e (detailed
socket information).
While at it, also print of the 'max' time only in case of success,
because 'mptcp_connect.c' will already print this info in case of error,
e.g.:
transfer slower than expected! runtime 11948 ms, expected 11921 ms
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-1-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1c670b39ce ("mptcp: change local addr type of subflow_destroy")
introduced a bug in mptcp_pm_nl_subflow_destroy_doit().
ipv6_addr_set_v4mapped() should be called to set the remote ipv4 address
'addr_r.addr.s_addr' to the remote ipv6 address 'addr_r.addr6', not
'addr_l.addr.addr6', which is the local ipv6 address.
Fixes: 1c670b39ce ("mptcp: change local addr type of subflow_destroy")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-fix-remote-addr-v1-1-debcd84ea86f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: bcm: asp2: fix fallout from phylib EEE changes
This series addresses the fallout from the phylib changes in the
Broadcom ASP2 driver.
The first patch uses phylib's copy of the LPI timer setting, which
means the driver no longer has to track this. It will be set in
hardware each time the adjust_link function is called when the link
is up, and will be read at initialisation time to set the current
value.
The second patch removes the driver's storage of tx_lpi_enabled,
which has become redundant since phylib managed EEE was merged. The
driver does nothing with this flag other than storing it.
The last patch converts the driver to use phylib's enable_tx_lpi
flag rather than trying to maintain its own copy.
====================
Link: https://patch.msgid.link/Z4aV3RmSZJ1WS3oR@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the Broadcom ASP2 driver to use phylib managed EEE support.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tXk81-000r4x-TS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Phylib maintains a copy of tx_lpi_enabled, which will be used to
populate the member when phy_ethtool_get_eee(). Therefore, writing to
this member before phy_ethtool_get_eee() will have no effect. Remove
it. Also remove setting our copy of info->eee.tx_lpi_enabled which
becomes write-only.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tXk7w-000r4r-Pq@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the LPI timer handling in Broadcom ASP2 driver after the phylib
managed EEE patches were merged.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tXk7r-000r4l-Li@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding the new debugfs entry, its kdoc equivalent was forgotten.
Add it now.
Fixes: d06905d686 ("i2c: add core-managed per-client directory in debugfs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250115163146.6c48f066@canb.auug.org.au
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Maxim PMICs may include fuel gauge with additional features, which is
out of single Linux power supply driver scope.
For example, in max77705 PMIC fuelgauge has additional registers, like
IIN_REG, VSYS_REG, ISYS_REG. Those needed to measure PMIC input current,
system voltage and current respectively. Those measurements cannot be
bound to any of fuelgauge properties.
The solution here add and option to use max17042 driver as a MFD sub
device, thus allowing any additional functionality be implemented as
another sub device. This will help to reduce code duplication in MFD
fuel gauge drivers.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250107-b4-max17042-v6-2-3d0104ad5bc7@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fuelgauge blocks often are incorporated in bigger chip, which may use
only 1 line for interrupts. Make interrupt shared.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250107-b4-max17042-v6-1-3d0104ad5bc7@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Now that the core host-bridge infrastructure is able to give us a callback
on each device being added or removed, convert the bus-notifier hack to it.
Link: https://lore.kernel.org/r/20241204150145.800408-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In order to let host controller drivers using the host-generic
infrastructure use the {en,dis}able_device() callbacks that can be used to
configure sideband RID mapping hardware, provide these two callbacks as
part of the pci_ecam_ops structure.
Link: https://lore.kernel.org/r/20241204150145.800408-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250111185358.183725-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
For the i.MX95, the configuration of a LUT is necessary to convert PCIe
Requester IDs (RIDs) to StreamIDs, which are used by both IOMMU and ITS.
This involves checking msi-map and iommu-map device tree properties to
ensure consistent mapping of Requester IDs to the same StreamIDs.
Subsequently, LUT-related registers are configured. If a msi-map isn't
detected, the platform relies on DWC built-in controller for MSIs that
do not need StreamIDs.
Implement PCI bus callback function to handle enable_device() and
disable_device() operations, setting up the LUT whenever a new PCI
device is enabled.
Known limitations:
- If iommu-map exists in the device tree but the IOMMU controller is
disabled, StreamIDs are programmed into the LUT. However, if a RID
is out of range of the iommu-map, enabling the PCI device would
result in a failure, although the PCI device can work without the
IOMMU.
- If msi-map exists in the device tree but the MSI controller is
disabled, MSIs will not work. The DWC driver skips initializing the
built-in MSI controller, falling back to legacy PCI INTx only.
Link: https://lore.kernel.org/r/20250114-imx95_lut-v9-2-39f58dbed03a@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: fix uninitialized "sid" in imx_pcie_enable_device()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114203611.1013324-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On Xe3, the register used to indicate which L3 banks are enabled on
the system is a new one called MIRROR_L3BANK_ENABLE. Each bit
represents one bank enabled in each node.
Extend the existing topology code for Xe3 to read this register and
generate the correct L3 bank mask, which can be read by user space
throug the topology query.
Bspec: 72573, 73439
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114203853.35055-1-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Add the description for @now to eliminate a kernel-doc warning.
timings.c:537: warning: Function parameter or struct member 'now' not described in 'irq_timings_next_event'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250111062954.910657-1-rdunlap@infradead.org
Instead of marking individual interrupts as safe to be migrated in
arbitrary contexts, mark the interrupt chips, which require the interrupt
to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED
flag. This makes more sense because this is a per interrupt chip property
and not restricted to individual interrupts.
That flips the logic from the historical opt-out to a opt-in model. This is
simpler to handle for other architectures, which default to unrestricted
affinity setting. It also allows to cleanup the redundant core logic
significantly.
All interrupt chips, which belong to a top-level domain sitting directly on
top of the x86 vector domain are marked accordingly, unless the related
setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114190612.846696-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We now free the temporary target path substring allocation on every
possible branch, instead of omitting the default branch. In some
cases, a memory leak occured, which could rapidly crash the system
(depending on how many file accesses were attempted).
This was detected in production because it caused a continuous memory
growth, eventually triggering kernel OOM and completely hard-locking
the kernel.
Relevant kmemleak stacktrace:
unreferenced object 0xffff888131e69900 (size 128):
comm "git", pid 66104, jiffies 4295435999
hex dump (first 32 bytes):
76 6f 6c 75 6d 65 73 2f 63 6f 6e 74 61 69 6e 65 volumes/containe
72 73 2f 67 69 74 65 61 2f 67 69 74 65 61 2f 67 rs/gitea/gitea/g
backtrace (crc 2f3bb450):
[<ffffffffaa68fb49>] __kmalloc_noprof+0x359/0x510
[<ffffffffc32bf1df>] ceph_mds_check_access+0x5bf/0x14e0 [ceph]
[<ffffffffc3235722>] ceph_open+0x312/0xd80 [ceph]
[<ffffffffaa7dd786>] do_dentry_open+0x456/0x1120
[<ffffffffaa7e3729>] vfs_open+0x79/0x360
[<ffffffffaa832875>] path_openat+0x1de5/0x4390
[<ffffffffaa834fcc>] do_filp_open+0x19c/0x3c0
[<ffffffffaa7e44a1>] do_sys_openat2+0x141/0x180
[<ffffffffaa7e4945>] __x64_sys_open+0xe5/0x1a0
[<ffffffffac2cc2f7>] do_syscall_64+0xb7/0x210
[<ffffffffac400130>] entry_SYSCALL_64_after_hwframe+0x77/0x7f
It can be triggered by mouting a subdirectory of a CephFS filesystem,
and then trying to access files on this subdirectory with an auth token
using a path-scoped capability:
$ ceph auth get client.services
[client.services]
key = REDACTED
caps mds = "allow rw fsname=cephfs path=/volumes/"
caps mon = "allow r fsname=cephfs"
caps osd = "allow rw tag cephfs data=cephfs"
$ cat /proc/self/mounts
services@[REDACTED].cephfs=/volumes/containers /ceph/containers ceph rw,noatime,name=services,secret=<hidden>,ms_mode=prefer-crc,mount_timeout=300,acl,mon_addr=[REDACTED]:3300,recover_session=clean 0 0
$ seq 1 1000000 | xargs -P32 --replace={} touch /ceph/containers/file-{} && \
seq 1 1000000 | xargs -P32 --replace={} cat /ceph/containers/file-{}
[ idryomov: combine if statements, rename rc to path_matched and make
it a bool, formatting ]
Cc: stable@vger.kernel.org
Fixes: 596afb0b89 ("ceph: add ceph_mds_check_access() helper")
Signed-off-by: Antoine Viallon <antoine@lesviallon.fr>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Enable DCC (Duty Cycle Control) in Lunar Lake.
DCC is the SLPC task that tries to keep
the GT from operating inefficiently when thermally constrained.
Although the recommendation is to enable it, LNL GuC is leaving
it disabled by default on LNL.
It would minimize the GT frequency oscillation on throttled
scenarios, which could potentially reduce latencies.
v2: Move set_policies call after wait for running state, so
we ensure it is not overwritten. (Vinay)
v3: Fix English in the commit message (Jonathan)
v4: Also set disable to 0 so DCC can really get into effect.
v5: Avoid lnl_ prefix (Vinay)
v6: Finish renaming...
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> #v3
Link: https://patchwork.freedesktop.org/patch/msgid/20250115145053.1142023-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allows the visualization of the current GuC power conservation
status and policies.
v2: Fix DCC msg (Vinay)
v3: Simplify pc_get_state_string (Jonathan)
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115145053.1142023-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ktime_get_fast_timestamps() was added in 2020 by commit e2d977c9f1
("timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper")
but has remained unused.
Remove it.
[ tglx: Fold the inline as David suggested in the submission ]
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250112160132.450209-1-linux@treblig.org
Use the correct kernel-doc notation for nested structs/unions to
eliminate warnings:
timer_migration.h:119: warning: Incorrect use of kernel-doc format: * struct - split state of tmigr_group
timer_migration.h:134: warning: Function parameter or struct member 'active' not described in 'tmigr_state'
timer_migration.h:134: warning: Function parameter or struct member 'migrator' not described in 'tmigr_state'
timer_migration.h:134: warning: Function parameter or struct member 'seq' not described in 'tmigr_state'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250111063156.910903-1-rdunlap@infradead.org
Add kernel-doc comments for two parameters to eliminate kernel-doc warnings:
tick-broadcast.c:1026: warning: Function parameter or struct member 'bc' not described in 'tick_broadcast_setup_oneshot'
tick-broadcast.c:1026: warning: Function parameter or struct member 'from_periodic' not described in 'tick_broadcast_setup_oneshot'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250111063148.910887-1-rdunlap@infradead.org
The return type should be 'bool' instead of 'int' according to the calling
context in the kernel, and its internal implementation, i.e. :
return timerqueue_add();
which is a bool-return function.
[ tglx: Adjust function arguments ]
Signed-off-by: Richard Clark <richard.xnu.clark@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/Z2ppT7me13dtxm1a@MBC02GN1V4Q05P
When a pair of clocksource reads separated by a udelay(1) claim less than a
full microsecond of elapsed time, print the measured delay as part of the
splat.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/717a2ddf-a80f-490b-aa3a-4e4b74fa56ca@paulmck-laptop
This backend requests a NACK from the controller driver when it detects
an error. If that request gets ignored from some reason, subsequent
accesses will wrongly be handled OK. To fix this, an error now changes
the state machine, so the backend will report NACK until a STOP
condition has been detected. This make the driver more robust against
controllers which will sadly apply the NACK not to the current byte but
the next one.
Fixes: a8335c64c5 ("i2c: add slave testunit driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
When this controller is a target, the NACK handling had two issues.
First, the return value from the backend was not checked on the initial
WRITE_REQUESTED. So, the driver missed to send a NACK in this case.
Also, the NACK always arrives one byte late on the bus, even in the
WRITE_RECEIVED case. This seems to be a HW issue. We should then not
rely on the backend to correctly NACK the superfluous byte as well. Fix
both issues by introducing a flag which gets set whenever the backend
requests a NACK and keep sending it until we get a STOP condition.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
When misconfigured, the initial setup of the current mux channel can
fail, too. It must be checked as well.
Fixes: 50a5ba8769 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
W25N01JW and W25N02JW support many DTR read modes in single, dual and
quad configurations.
DTR modes however cannot be used at 166MHz, as the bus frequency in
this case must be lowered to 80MHz.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
